-What: /debug/pktcdvd/pktcdvd[0-7]
+What: /sys/kernel/debug/pktcdvd/pktcdvd[0-7]
Date: Oct. 2006
KernelVersion: 2.6.20
Contact: Thomas Maier <balagi@justmail.de>
The pktcdvd module (packet writing driver) creates
these files in debugfs:
-/debug/pktcdvd/pktcdvd[0-7]/
+/sys/kernel/debug/pktcdvd/pktcdvd[0-7]/
info (0444) Lots of driver statistics and infos.
Example:
-------
-cat /debug/pktcdvd/pktcdvd0/info
+cat /sys/kernel/debug/pktcdvd/pktcdvd0/info
Salient features
-a. Enable control of both RSS (mapped) and Page Cache (unmapped) pages
+a. Enable control of Anonymous, Page Cache (mapped and unmapped) and
+ Swap Cache memory pages.
b. The infrastructure allows easy addition of other types of memory to control
c. Provides *zero overhead* for non memory controller users
d. Provides a double LRU: global memory pressure causes reclaim from the
global LRU; a cgroup on hitting a limit, reclaims from the per
cgroup LRU
-NOTE: Swap Cache (unmapped) is not accounted now.
-
Benefits and Purpose of the memory controller
The memory controller isolates the memory behaviour of a group of tasks
moved to the parent. If you want to avoid that, force_empty will be useful.
5.2 stat file
- memory.stat file includes following statistics (now)
- cache - # of pages from page-cache and shmem.
- rss - # of pages from anonymous memory.
- pgpgin - # of event of charging
- pgpgout - # of event of uncharging
- active_anon - # of pages on active lru of anon, shmem.
- inactive_anon - # of pages on active lru of anon, shmem
- active_file - # of pages on active lru of file-cache
- inactive_file - # of pages on inactive lru of file cache
- unevictable - # of pages cannot be reclaimed.(mlocked etc)
-
- Below is depend on CONFIG_DEBUG_VM.
- inactive_ratio - VM internal parameter. (see mm/page_alloc.c)
- recent_rotated_anon - VM internal parameter. (see mm/vmscan.c)
- recent_rotated_file - VM internal parameter. (see mm/vmscan.c)
- recent_scanned_anon - VM internal parameter. (see mm/vmscan.c)
- recent_scanned_file - VM internal parameter. (see mm/vmscan.c)
-
- Memo:
+
+memory.stat file includes following statistics
+
+cache - # of bytes of page cache memory.
+rss - # of bytes of anonymous and swap cache memory.
+pgpgin - # of pages paged in (equivalent to # of charging events).
+pgpgout - # of pages paged out (equivalent to # of uncharging events).
+active_anon - # of bytes of anonymous and swap cache memory on active
+ lru list.
+inactive_anon - # of bytes of anonymous memory and swap cache memory on
+ inactive lru list.
+active_file - # of bytes of file-backed memory on active lru list.
+inactive_file - # of bytes of file-backed memory on inactive lru list.
+unevictable - # of bytes of memory that cannot be reclaimed (mlocked etc).
+
+The following additional stats are dependent on CONFIG_DEBUG_VM.
+
+inactive_ratio - VM internal parameter. (see mm/page_alloc.c)
+recent_rotated_anon - VM internal parameter. (see mm/vmscan.c)
+recent_rotated_file - VM internal parameter. (see mm/vmscan.c)
+recent_scanned_anon - VM internal parameter. (see mm/vmscan.c)
+recent_scanned_file - VM internal parameter. (see mm/vmscan.c)
+
+Memo:
recent_rotated means recent frequency of lru rotation.
recent_scanned means recent # of scans to lru.
showing for better debug please see the code for meanings.
+Note:
+ Only anonymous and swap cache memory is listed as part of 'rss' stat.
+ This should not be confused with the true 'resident set size' or the
+ amount of physical memory used by the cgroup. Per-cgroup rss
+ accounting is not done yet.
5.3 swappiness
Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.
- Following cgroup's swapiness can't be changed.
+ Following cgroups' swapiness can't be changed.
- root cgroup (uses /proc/sys/vm/swappiness).
- a cgroup which uses hierarchy and it has child cgroup.
- a cgroup which uses hierarchy and not the root of hierarchy.
2. Basic accounting routines
- a. void res_counter_init(struct res_counter *rc)
+ a. void res_counter_init(struct res_counter *rc,
+ struct res_counter *rc_parent)
Initializes the resource counter. As usual, should be the first
routine called for a new counter.
- b. int res_counter_charge[_locked]
- (struct res_counter *rc, unsigned long val)
+ The struct res_counter *parent can be used to define a hierarchical
+ child -> parent relationship directly in the res_counter structure,
+ NULL can be used to define no relationship.
+
+ c. int res_counter_charge(struct res_counter *rc, unsigned long val,
+ struct res_counter **limit_fail_at)
When a resource is about to be allocated it has to be accounted
with the appropriate resource counter (controller should determine
* if the charging is performed first, then it should be uncharged
on error path (if the one is called).
- c. void res_counter_uncharge[_locked]
+ If the charging fails and a hierarchical dependency exists, the
+ limit_fail_at parameter is set to the particular res_counter element
+ where the charging failed.
+
+ d. int res_counter_charge_locked
+ (struct res_counter *rc, unsigned long val)
+
+ The same as res_counter_charge(), but it must not acquire/release the
+ res_counter->lock internally (it must be called with res_counter->lock
+ held).
+
+ e. void res_counter_uncharge[_locked]
(struct res_counter *rc, unsigned long val)
When a resource is released (freed) it should be de-accounted
from the resource counter it was accounted to. This is called
"uncharging".
- The _locked routines imply that the res_counter->lock is taken.
-
+ The _locked routines imply that the res_counter->lock is taken.
2.1 Other accounting routines
There is only one file in this directory.
unix_dgram_qlen limits the max number of datagrams queued in Unix domain
-socket's buffer. It will not take effect unless PF_UNIX flag is spicified.
+socket's buffer. It will not take effect unless PF_UNIX flag is specified.
3. /proc/sys/net/ipv4 - IPV4 settings
--- /dev/null
+--- What is TOMOYO? ---
+
+TOMOYO is a name-based MAC extension (LSM module) for the Linux kernel.
+
+LiveCD-based tutorials are available at
+http://tomoyo.sourceforge.jp/en/1.6.x/1st-step/ubuntu8.04-live/
+http://tomoyo.sourceforge.jp/en/1.6.x/1st-step/centos5-live/ .
+Though these tutorials use non-LSM version of TOMOYO, they are useful for you
+to know what TOMOYO is.
+
+--- How to enable TOMOYO? ---
+
+Build the kernel with CONFIG_SECURITY_TOMOYO=y and pass "security=tomoyo" on
+kernel's command line.
+
+Please see http://tomoyo.sourceforge.jp/en/2.2.x/ for details.
+
+--- Where is documentation? ---
+
+User <-> Kernel interface documentation is available at
+http://tomoyo.sourceforge.jp/en/2.2.x/policy-reference.html .
+
+Materials we prepared for seminars and symposiums are available at
+http://sourceforge.jp/projects/tomoyo/docs/?category_id=532&language_id=1 .
+Below lists are chosen from three aspects.
+
+What is TOMOYO?
+ TOMOYO Linux Overview
+ http://sourceforge.jp/projects/tomoyo/docs/lca2009-takeda.pdf
+ TOMOYO Linux: pragmatic and manageable security for Linux
+ http://sourceforge.jp/projects/tomoyo/docs/freedomhectaipei-tomoyo.pdf
+ TOMOYO Linux: A Practical Method to Understand and Protect Your Own Linux Box
+ http://sourceforge.jp/projects/tomoyo/docs/PacSec2007-en-no-demo.pdf
+
+What can TOMOYO do?
+ Deep inside TOMOYO Linux
+ http://sourceforge.jp/projects/tomoyo/docs/lca2009-kumaneko.pdf
+ The role of "pathname based access control" in security.
+ http://sourceforge.jp/projects/tomoyo/docs/lfj2008-bof.pdf
+
+History of TOMOYO?
+ Realities of Mainlining
+ http://sourceforge.jp/projects/tomoyo/docs/lfj2008.pdf
+
+--- What is future plan? ---
+
+We believe that inode based security and name based security are complementary
+and both should be used together. But unfortunately, so far, we cannot enable
+multiple LSM modules at the same time. We feel sorry that you have to give up
+SELinux/SMACK/AppArmor etc. when you want to use TOMOYO.
+
+We hope that LSM becomes stackable in future. Meanwhile, you can use non-LSM
+version of TOMOYO, available at http://tomoyo.sourceforge.jp/en/1.6.x/ .
+LSM version of TOMOYO is a subset of non-LSM version of TOMOYO. We are planning
+to port non-LSM version's functionalities to LSM versions.
00-INDEX
- this file.
+active_mm.txt
+ - An explanation from Linus about tsk->active_mm vs tsk->mm.
balance
- various information on memory balancing.
hugetlbpage.txt
--- /dev/null
+List: linux-kernel
+Subject: Re: active_mm
+From: Linus Torvalds <torvalds () transmeta ! com>
+Date: 1999-07-30 21:36:24
+
+Cc'd to linux-kernel, because I don't write explanations all that often,
+and when I do I feel better about more people reading them.
+
+On Fri, 30 Jul 1999, David Mosberger wrote:
+>
+> Is there a brief description someplace on how "mm" vs. "active_mm" in
+> the task_struct are supposed to be used? (My apologies if this was
+> discussed on the mailing lists---I just returned from vacation and
+> wasn't able to follow linux-kernel for a while).
+
+Basically, the new setup is:
+
+ - we have "real address spaces" and "anonymous address spaces". The
+ difference is that an anonymous address space doesn't care about the
+ user-level page tables at all, so when we do a context switch into an
+ anonymous address space we just leave the previous address space
+ active.
+
+ The obvious use for a "anonymous address space" is any thread that
+ doesn't need any user mappings - all kernel threads basically fall into
+ this category, but even "real" threads can temporarily say that for
+ some amount of time they are not going to be interested in user space,
+ and that the scheduler might as well try to avoid wasting time on
+ switching the VM state around. Currently only the old-style bdflush
+ sync does that.
+
+ - "tsk->mm" points to the "real address space". For an anonymous process,
+ tsk->mm will be NULL, for the logical reason that an anonymous process
+ really doesn't _have_ a real address space at all.
+
+ - however, we obviously need to keep track of which address space we
+ "stole" for such an anonymous user. For that, we have "tsk->active_mm",
+ which shows what the currently active address space is.
+
+ The rule is that for a process with a real address space (ie tsk->mm is
+ non-NULL) the active_mm obviously always has to be the same as the real
+ one.
+
+ For a anonymous process, tsk->mm == NULL, and tsk->active_mm is the
+ "borrowed" mm while the anonymous process is running. When the
+ anonymous process gets scheduled away, the borrowed address space is
+ returned and cleared.
+
+To support all that, the "struct mm_struct" now has two counters: a
+"mm_users" counter that is how many "real address space users" there are,
+and a "mm_count" counter that is the number of "lazy" users (ie anonymous
+users) plus one if there are any real users.
+
+Usually there is at least one real user, but it could be that the real
+user exited on another CPU while a lazy user was still active, so you do
+actually get cases where you have a address space that is _only_ used by
+lazy users. That is often a short-lived state, because once that thread
+gets scheduled away in favour of a real thread, the "zombie" mm gets
+released because "mm_users" becomes zero.
+
+Also, a new rule is that _nobody_ ever has "init_mm" as a real MM any
+more. "init_mm" should be considered just a "lazy context when no other
+context is available", and in fact it is mainly used just at bootup when
+no real VM has yet been created. So code that used to check
+
+ if (current->mm == &init_mm)
+
+should generally just do
+
+ if (!current->mm)
+
+instead (which makes more sense anyway - the test is basically one of "do
+we have a user context", and is generally done by the page fault handler
+and things like that).
+
+Anyway, I put a pre-patch-2.3.13-1 on ftp.kernel.org just a moment ago,
+because it slightly changes the interfaces to accomodate the alpha (who
+would have thought it, but the alpha actually ends up having one of the
+ugliest context switch codes - unlike the other architectures where the MM
+and register state is separate, the alpha PALcode joins the two, and you
+need to switch both together).
+
+(From http://marc.info/?l=linux-kernel&m=93337278602211&w=2)
-
-This document describes the Linux memory management "Unevictable LRU"
-infrastructure and the use of this infrastructure to manage several types
-of "unevictable" pages. The document attempts to provide the overall
-rationale behind this mechanism and the rationale for some of the design
-decisions that drove the implementation. The latter design rationale is
-discussed in the context of an implementation description. Admittedly, one
-can obtain the implementation details--the "what does it do?"--by reading the
-code. One hopes that the descriptions below add value by provide the answer
-to "why does it do that?".
-
-Unevictable LRU Infrastructure:
-
-The Unevictable LRU adds an additional LRU list to track unevictable pages
-and to hide these pages from vmscan. This mechanism is based on a patch by
-Larry Woodman of Red Hat to address several scalability problems with page
+ ==============================
+ UNEVICTABLE LRU INFRASTRUCTURE
+ ==============================
+
+========
+CONTENTS
+========
+
+ (*) The Unevictable LRU
+
+ - The unevictable page list.
+ - Memory control group interaction.
+ - Marking address spaces unevictable.
+ - Detecting Unevictable Pages.
+ - vmscan's handling of unevictable pages.
+
+ (*) mlock()'d pages.
+
+ - History.
+ - Basic management.
+ - mlock()/mlockall() system call handling.
+ - Filtering special vmas.
+ - munlock()/munlockall() system call handling.
+ - Migrating mlocked pages.
+ - mmap(MAP_LOCKED) system call handling.
+ - munmap()/exit()/exec() system call handling.
+ - try_to_unmap().
+ - try_to_munlock() reverse map scan.
+ - Page reclaim in shrink_*_list().
+
+
+============
+INTRODUCTION
+============
+
+This document describes the Linux memory manager's "Unevictable LRU"
+infrastructure and the use of this to manage several types of "unevictable"
+pages.
+
+The document attempts to provide the overall rationale behind this mechanism
+and the rationale for some of the design decisions that drove the
+implementation. The latter design rationale is discussed in the context of an
+implementation description. Admittedly, one can obtain the implementation
+details - the "what does it do?" - by reading the code. One hopes that the
+descriptions below add value by provide the answer to "why does it do that?".
+
+
+===================
+THE UNEVICTABLE LRU
+===================
+
+The Unevictable LRU facility adds an additional LRU list to track unevictable
+pages and to hide these pages from vmscan. This mechanism is based on a patch
+by Larry Woodman of Red Hat to address several scalability problems with page
reclaim in Linux. The problems have been observed at customer sites on large
-memory x86_64 systems. For example, a non-numal x86_64 platform with 128GB
-of main memory will have over 32 million 4k pages in a single zone. When a
-large fraction of these pages are not evictable for any reason [see below],
-vmscan will spend a lot of time scanning the LRU lists looking for the small
-fraction of pages that are evictable. This can result in a situation where
-all cpus are spending 100% of their time in vmscan for hours or days on end,
-with the system completely unresponsive.
-
-The Unevictable LRU infrastructure addresses the following classes of
-unevictable pages:
-
-+ page owned by ramfs
-+ page mapped into SHM_LOCKed shared memory regions
-+ page mapped into VM_LOCKED [mlock()ed] vmas
-
-The infrastructure might be able to handle other conditions that make pages
+memory x86_64 systems.
+
+To illustrate this with an example, a non-NUMA x86_64 platform with 128GB of
+main memory will have over 32 million 4k pages in a single zone. When a large
+fraction of these pages are not evictable for any reason [see below], vmscan
+will spend a lot of time scanning the LRU lists looking for the small fraction
+of pages that are evictable. This can result in a situation where all CPUs are
+spending 100% of their time in vmscan for hours or days on end, with the system
+completely unresponsive.
+
+The unevictable list addresses the following classes of unevictable pages:
+
+ (*) Those owned by ramfs.
+
+ (*) Those mapped into SHM_LOCK'd shared memory regions.
+
+ (*) Those mapped into VM_LOCKED [mlock()ed] VMAs.
+
+The infrastructure may also be able to handle other conditions that make pages
unevictable, either by definition or by circumstance, in the future.
-The Unevictable LRU List
+THE UNEVICTABLE PAGE LIST
+-------------------------
The Unevictable LRU infrastructure consists of an additional, per-zone, LRU list
called the "unevictable" list and an associated page flag, PG_unevictable, to
-indicate that the page is being managed on the unevictable list. The
-PG_unevictable flag is analogous to, and mutually exclusive with, the PG_active
-flag in that it indicates on which LRU list a page resides when PG_lru is set.
-The unevictable LRU list is source configurable based on the UNEVICTABLE_LRU
-Kconfig option.
+indicate that the page is being managed on the unevictable list.
+
+The PG_unevictable flag is analogous to, and mutually exclusive with, the
+PG_active flag in that it indicates on which LRU list a page resides when
+PG_lru is set. The unevictable list is compile-time configurable based on the
+UNEVICTABLE_LRU Kconfig option.
The Unevictable LRU infrastructure maintains unevictable pages on an additional
LRU list for a few reasons:
-1) We get to "treat unevictable pages just like we treat other pages in the
- system, which means we get to use the same code to manipulate them, the
- same code to isolate them (for migrate, etc.), the same code to keep track
- of the statistics, etc..." [Rik van Riel]
+ (1) We get to "treat unevictable pages just like we treat other pages in the
+ system - which means we get to use the same code to manipulate them, the
+ same code to isolate them (for migrate, etc.), the same code to keep track
+ of the statistics, etc..." [Rik van Riel]
+
+ (2) We want to be able to migrate unevictable pages between nodes for memory
+ defragmentation, workload management and memory hotplug. The linux kernel
+ can only migrate pages that it can successfully isolate from the LRU
+ lists. If we were to maintain pages elsewhere than on an LRU-like list,
+ where they can be found by isolate_lru_page(), we would prevent their
+ migration, unless we reworked migration code to find the unevictable pages
+ itself.
-2) We want to be able to migrate unevictable pages between nodes--for memory
- defragmentation, workload management and memory hotplug. The linux kernel
- can only migrate pages that it can successfully isolate from the lru lists.
- If we were to maintain pages elsewise than on an lru-like list, where they
- can be found by isolate_lru_page(), we would prevent their migration, unless
- we reworked migration code to find the unevictable pages.
+The unevictable list does not differentiate between file-backed and anonymous,
+swap-backed pages. This differentiation is only important while the pages are,
+in fact, evictable.
-The unevictable LRU list does not differentiate between file backed and swap
-backed [anon] pages. This differentiation is only important while the pages
-are, in fact, evictable.
+The unevictable list benefits from the "arrayification" of the per-zone LRU
+lists and statistics originally proposed and posted by Christoph Lameter.
-The unevictable LRU list benefits from the "arrayification" of the per-zone
-LRU lists and statistics originally proposed and posted by Christoph Lameter.
+The unevictable list does not use the LRU pagevec mechanism. Rather,
+unevictable pages are placed directly on the page's zone's unevictable list
+under the zone lru_lock. This allows us to prevent the stranding of pages on
+the unevictable list when one task has the page isolated from the LRU and other
+tasks are changing the "evictability" state of the page.
-The unevictable list does not use the lru pagevec mechanism. Rather,
-unevictable pages are placed directly on the page's zone's unevictable
-list under the zone lru_lock. The reason for this is to prevent stranding
-of pages on the unevictable list when one task has the page isolated from the
-lru and other tasks are changing the "evictability" state of the page.
+MEMORY CONTROL GROUP INTERACTION
+--------------------------------
-Unevictable LRU and Memory Controller Interaction
+The unevictable LRU facility interacts with the memory control group [aka
+memory controller; see Documentation/cgroups/memory.txt] by extending the
+lru_list enum.
+
+The memory controller data structure automatically gets a per-zone unevictable
+list as a result of the "arrayification" of the per-zone LRU lists (one per
+lru_list enum element). The memory controller tracks the movement of pages to
+and from the unevictable list.
-The memory controller data structure automatically gets a per zone unevictable
-lru list as a result of the "arrayification" of the per-zone LRU lists. The
-memory controller tracks the movement of pages to and from the unevictable list.
When a memory control group comes under memory pressure, the controller will
not attempt to reclaim pages on the unevictable list. This has a couple of
-effects. Because the pages are "hidden" from reclaim on the unevictable list,
-the reclaim process can be more efficient, dealing only with pages that have
-a chance of being reclaimed. On the other hand, if too many of the pages
-charged to the control group are unevictable, the evictable portion of the
-working set of the tasks in the control group may not fit into the available
-memory. This can cause the control group to thrash or to oom-kill tasks.
-
-
-Unevictable LRU: Detecting Unevictable Pages
-
-The function page_evictable(page, vma) in vmscan.c determines whether a
-page is evictable or not. For ramfs pages and pages in SHM_LOCKed regions,
-page_evictable() tests a new address space flag, AS_UNEVICTABLE, in the page's
-address space using a wrapper function. Wrapper functions are used to set,
-clear and test the flag to reduce the requirement for #ifdef's throughout the
-source code. AS_UNEVICTABLE is set on ramfs inode/mapping when it is created.
-This flag remains for the life of the inode.
-
-For shared memory regions, AS_UNEVICTABLE is set when an application
-successfully SHM_LOCKs the region and is removed when the region is
-SHM_UNLOCKed. Note that shmctl(SHM_LOCK, ...) does not populate the page
-tables for the region as does, for example, mlock(). So, we make no special
-effort to push any pages in the SHM_LOCKed region to the unevictable list.
-Vmscan will do this when/if it encounters the pages during reclaim. On
-SHM_UNLOCK, shmctl() scans the pages in the region and "rescues" them from the
-unevictable list if no other condition keeps them unevictable. If a SHM_LOCKed
-region is destroyed, the pages are also "rescued" from the unevictable list in
-the process of freeing them.
-
-page_evictable() detects mlock()ed pages by testing an additional page flag,
-PG_mlocked via the PageMlocked() wrapper. If the page is NOT mlocked, and a
-non-NULL vma is supplied, page_evictable() will check whether the vma is
+effects:
+
+ (1) Because the pages are "hidden" from reclaim on the unevictable list, the
+ reclaim process can be more efficient, dealing only with pages that have a
+ chance of being reclaimed.
+
+ (2) On the other hand, if too many of the pages charged to the control group
+ are unevictable, the evictable portion of the working set of the tasks in
+ the control group may not fit into the available memory. This can cause
+ the control group to thrash or to OOM-kill tasks.
+
+
+MARKING ADDRESS SPACES UNEVICTABLE
+----------------------------------
+
+For facilities such as ramfs none of the pages attached to the address space
+may be evicted. To prevent eviction of any such pages, the AS_UNEVICTABLE
+address space flag is provided, and this can be manipulated by a filesystem
+using a number of wrapper functions:
+
+ (*) void mapping_set_unevictable(struct address_space *mapping);
+
+ Mark the address space as being completely unevictable.
+
+ (*) void mapping_clear_unevictable(struct address_space *mapping);
+
+ Mark the address space as being evictable.
+
+ (*) int mapping_unevictable(struct address_space *mapping);
+
+ Query the address space, and return true if it is completely
+ unevictable.
+
+These are currently used in two places in the kernel:
+
+ (1) By ramfs to mark the address spaces of its inodes when they are created,
+ and this mark remains for the life of the inode.
+
+ (2) By SYSV SHM to mark SHM_LOCK'd address spaces until SHM_UNLOCK is called.
+
+ Note that SHM_LOCK is not required to page in the locked pages if they're
+ swapped out; the application must touch the pages manually if it wants to
+ ensure they're in memory.
+
+
+DETECTING UNEVICTABLE PAGES
+---------------------------
+
+The function page_evictable() in vmscan.c determines whether a page is
+evictable or not using the query function outlined above [see section "Marking
+address spaces unevictable"] to check the AS_UNEVICTABLE flag.
+
+For address spaces that are so marked after being populated (as SHM regions
+might be), the lock action (eg: SHM_LOCK) can be lazy, and need not populate
+the page tables for the region as does, for example, mlock(), nor need it make
+any special effort to push any pages in the SHM_LOCK'd area to the unevictable
+list. Instead, vmscan will do this if and when it encounters the pages during
+a reclamation scan.
+
+On an unlock action (such as SHM_UNLOCK), the unlocker (eg: shmctl()) must scan
+the pages in the region and "rescue" them from the unevictable list if no other
+condition is keeping them unevictable. If an unevictable region is destroyed,
+the pages are also "rescued" from the unevictable list in the process of
+freeing them.
+
+page_evictable() also checks for mlocked pages by testing an additional page
+flag, PG_mlocked (as wrapped by PageMlocked()). If the page is NOT mlocked,
+and a non-NULL VMA is supplied, page_evictable() will check whether the VMA is
VM_LOCKED via is_mlocked_vma(). is_mlocked_vma() will SetPageMlocked() and
update the appropriate statistics if the vma is VM_LOCKED. This method allows
efficient "culling" of pages in the fault path that are being faulted in to
-VM_LOCKED vmas.
+VM_LOCKED VMAs.
-Unevictable Pages and Vmscan [shrink_*_list()]
+VMSCAN'S HANDLING OF UNEVICTABLE PAGES
+--------------------------------------
If unevictable pages are culled in the fault path, or moved to the unevictable
-list at mlock() or mmap() time, vmscan will never encounter the pages until
-they have become evictable again, for example, via munlock() and have been
-"rescued" from the unevictable list. However, there may be situations where we
-decide, for the sake of expediency, to leave a unevictable page on one of the
-regular active/inactive LRU lists for vmscan to deal with. Vmscan checks for
-such pages in all of the shrink_{active|inactive|page}_list() functions and
-will "cull" such pages that it encounters--that is, it diverts those pages to
-the unevictable list for the zone being scanned.
-
-There may be situations where a page is mapped into a VM_LOCKED vma, but the
-page is not marked as PageMlocked. Such pages will make it all the way to
+list at mlock() or mmap() time, vmscan will not encounter the pages until they
+have become evictable again (via munlock() for example) and have been "rescued"
+from the unevictable list. However, there may be situations where we decide,
+for the sake of expediency, to leave a unevictable page on one of the regular
+active/inactive LRU lists for vmscan to deal with. vmscan checks for such
+pages in all of the shrink_{active|inactive|page}_list() functions and will
+"cull" such pages that it encounters: that is, it diverts those pages to the
+unevictable list for the zone being scanned.
+
+There may be situations where a page is mapped into a VM_LOCKED VMA, but the
+page is not marked as PG_mlocked. Such pages will make it all the way to
shrink_page_list() where they will be detected when vmscan walks the reverse
-map in try_to_unmap(). If try_to_unmap() returns SWAP_MLOCK, shrink_page_list()
-will cull the page at that point.
+map in try_to_unmap(). If try_to_unmap() returns SWAP_MLOCK,
+shrink_page_list() will cull the page at that point.
-To "cull" an unevictable page, vmscan simply puts the page back on the lru
-list using putback_lru_page()--the inverse operation to isolate_lru_page()--
-after dropping the page lock. Because the condition which makes the page
-unevictable may change once the page is unlocked, putback_lru_page() will
-recheck the unevictable state of a page that it places on the unevictable lru
-list. If the page has become unevictable, putback_lru_page() removes it from
-the list and retries, including the page_unevictable() test. Because such a
-race is a rare event and movement of pages onto the unevictable list should be
-rare, these extra evictabilty checks should not occur in the majority of calls
-to putback_lru_page().
+To "cull" an unevictable page, vmscan simply puts the page back on the LRU list
+using putback_lru_page() - the inverse operation to isolate_lru_page() - after
+dropping the page lock. Because the condition which makes the page unevictable
+may change once the page is unlocked, putback_lru_page() will recheck the
+unevictable state of a page that it places on the unevictable list. If the
+page has become unevictable, putback_lru_page() removes it from the list and
+retries, including the page_unevictable() test. Because such a race is a rare
+event and movement of pages onto the unevictable list should be rare, these
+extra evictabilty checks should not occur in the majority of calls to
+putback_lru_page().
-Mlocked Page: Prior Work
+=============
+MLOCKED PAGES
+=============
-The "Unevictable Mlocked Pages" infrastructure is based on work originally
+The unevictable page list is also useful for mlock(), in addition to ramfs and
+SYSV SHM. Note that mlock() is only available in CONFIG_MMU=y situations; in
+NOMMU situations, all mappings are effectively mlocked.
+
+
+HISTORY
+-------
+
+The "Unevictable mlocked Pages" infrastructure is based on work originally
posted by Nick Piggin in an RFC patch entitled "mm: mlocked pages off LRU".
-Nick posted his patch as an alternative to a patch posted by Christoph
-Lameter to achieve the same objective--hiding mlocked pages from vmscan.
-In Nick's patch, he used one of the struct page lru list link fields as a count
-of VM_LOCKED vmas that map the page. This use of the link field for a count
-prevented the management of the pages on an LRU list. Thus, mlocked pages were
-not migratable as isolate_lru_page() could not find them and the lru list link
-field was not available to the migration subsystem. Nick resolved this by
-putting mlocked pages back on the lru list before attempting to isolate them,
-thus abandoning the count of VM_LOCKED vmas. When Nick's patch was integrated
-with the Unevictable LRU work, the count was replaced by walking the reverse
-map to determine whether any VM_LOCKED vmas mapped the page. More on this
-below.
-
-
-Mlocked Pages: Basic Management
-
-Mlocked pages--pages mapped into a VM_LOCKED vma--represent one class of
-unevictable pages. When such a page has been "noticed" by the memory
-management subsystem, the page is marked with the PG_mlocked [PageMlocked()]
-flag. A PageMlocked() page will be placed on the unevictable LRU list when
-it is added to the LRU. Pages can be "noticed" by memory management in
-several places:
-
-1) in the mlock()/mlockall() system call handlers.
-2) in the mmap() system call handler when mmap()ing a region with the
- MAP_LOCKED flag, or mmap()ing a region in a task that has called
- mlockall() with the MCL_FUTURE flag. Both of these conditions result
- in the VM_LOCKED flag being set for the vma.
-3) in the fault path, if mlocked pages are "culled" in the fault path,
- and when a VM_LOCKED stack segment is expanded.
-4) as mentioned above, in vmscan:shrink_page_list() when attempting to
- reclaim a page in a VM_LOCKED vma via try_to_unmap().
-
-Mlocked pages become unlocked and rescued from the unevictable list when:
-
-1) mapped in a range unlocked via the munlock()/munlockall() system calls.
-2) munmapped() out of the last VM_LOCKED vma that maps the page, including
- unmapping at task exit.
-3) when the page is truncated from the last VM_LOCKED vma of an mmap()ed file.
-4) before a page is COWed in a VM_LOCKED vma.
-
-
-Mlocked Pages: mlock()/mlockall() System Call Handling
+Nick posted his patch as an alternative to a patch posted by Christoph Lameter
+to achieve the same objective: hiding mlocked pages from vmscan.
+
+In Nick's patch, he used one of the struct page LRU list link fields as a count
+of VM_LOCKED VMAs that map the page. This use of the link field for a count
+prevented the management of the pages on an LRU list, and thus mlocked pages
+were not migratable as isolate_lru_page() could not find them, and the LRU list
+link field was not available to the migration subsystem.
+
+Nick resolved this by putting mlocked pages back on the lru list before
+attempting to isolate them, thus abandoning the count of VM_LOCKED VMAs. When
+Nick's patch was integrated with the Unevictable LRU work, the count was
+replaced by walking the reverse map to determine whether any VM_LOCKED VMAs
+mapped the page. More on this below.
+
+
+BASIC MANAGEMENT
+----------------
+
+mlocked pages - pages mapped into a VM_LOCKED VMA - are a class of unevictable
+pages. When such a page has been "noticed" by the memory management subsystem,
+the page is marked with the PG_mlocked flag. This can be manipulated using the
+PageMlocked() functions.
+
+A PG_mlocked page will be placed on the unevictable list when it is added to
+the LRU. Such pages can be "noticed" by memory management in several places:
+
+ (1) in the mlock()/mlockall() system call handlers;
+
+ (2) in the mmap() system call handler when mmapping a region with the
+ MAP_LOCKED flag;
+
+ (3) mmapping a region in a task that has called mlockall() with the MCL_FUTURE
+ flag
+
+ (4) in the fault path, if mlocked pages are "culled" in the fault path,
+ and when a VM_LOCKED stack segment is expanded; or
+
+ (5) as mentioned above, in vmscan:shrink_page_list() when attempting to
+ reclaim a page in a VM_LOCKED VMA via try_to_unmap()
+
+all of which result in the VM_LOCKED flag being set for the VMA if it doesn't
+already have it set.
+
+mlocked pages become unlocked and rescued from the unevictable list when:
+
+ (1) mapped in a range unlocked via the munlock()/munlockall() system calls;
+
+ (2) munmap()'d out of the last VM_LOCKED VMA that maps the page, including
+ unmapping at task exit;
+
+ (3) when the page is truncated from the last VM_LOCKED VMA of an mmapped file;
+ or
+
+ (4) before a page is COW'd in a VM_LOCKED VMA.
+
+
+mlock()/mlockall() SYSTEM CALL HANDLING
+---------------------------------------
Both [do_]mlock() and [do_]mlockall() system call handlers call mlock_fixup()
-for each vma in the range specified by the call. In the case of mlockall(),
+for each VMA in the range specified by the call. In the case of mlockall(),
this is the entire active address space of the task. Note that mlock_fixup()
-is used for both mlock()ing and munlock()ing a range of memory. A call to
-mlock() an already VM_LOCKED vma, or to munlock() a vma that is not VM_LOCKED
-is treated as a no-op--mlock_fixup() simply returns.
-
-If the vma passes some filtering described in "Mlocked Pages: Filtering Vmas"
-below, mlock_fixup() will attempt to merge the vma with its neighbors or split
-off a subset of the vma if the range does not cover the entire vma. Once the
-vma has been merged or split or neither, mlock_fixup() will call
-__mlock_vma_pages_range() to fault in the pages via get_user_pages() and
-to mark the pages as mlocked via mlock_vma_page().
-
-Note that the vma being mlocked might be mapped with PROT_NONE. In this case,
-get_user_pages() will be unable to fault in the pages. That's OK. If pages
-do end up getting faulted into this VM_LOCKED vma, we'll handle them in the
+is used for both mlocking and munlocking a range of memory. A call to mlock()
+an already VM_LOCKED VMA, or to munlock() a VMA that is not VM_LOCKED is
+treated as a no-op, and mlock_fixup() simply returns.
+
+If the VMA passes some filtering as described in "Filtering Special Vmas"
+below, mlock_fixup() will attempt to merge the VMA with its neighbors or split
+off a subset of the VMA if the range does not cover the entire VMA. Once the
+VMA has been merged or split or neither, mlock_fixup() will call
+__mlock_vma_pages_range() to fault in the pages via get_user_pages() and to
+mark the pages as mlocked via mlock_vma_page().
+
+Note that the VMA being mlocked might be mapped with PROT_NONE. In this case,
+get_user_pages() will be unable to fault in the pages. That's okay. If pages
+do end up getting faulted into this VM_LOCKED VMA, we'll handle them in the
fault path or in vmscan.
Also note that a page returned by get_user_pages() could be truncated or
-migrated out from under us, while we're trying to mlock it. To detect
-this, __mlock_vma_pages_range() tests the page_mapping after acquiring
-the page lock. If the page is still associated with its mapping, we'll
-go ahead and call mlock_vma_page(). If the mapping is gone, we just
-unlock the page and move on. Worse case, this results in page mapped
-in a VM_LOCKED vma remaining on a normal LRU list without being
-PageMlocked(). Again, vmscan will detect and cull such pages.
-
-mlock_vma_page(), called with the page locked [N.B., not "mlocked"], will
-TestSetPageMlocked() for each page returned by get_user_pages(). We use
-TestSetPageMlocked() because the page might already be mlocked by another
-task/vma and we don't want to do extra work. We especially do not want to
-count an mlocked page more than once in the statistics. If the page was
-already mlocked, mlock_vma_page() is done.
+migrated out from under us, while we're trying to mlock it. To detect this,
+__mlock_vma_pages_range() checks page_mapping() after acquiring the page lock.
+If the page is still associated with its mapping, we'll go ahead and call
+mlock_vma_page(). If the mapping is gone, we just unlock the page and move on.
+In the worst case, this will result in a page mapped in a VM_LOCKED VMA
+remaining on a normal LRU list without being PageMlocked(). Again, vmscan will
+detect and cull such pages.
+
+mlock_vma_page() will call TestSetPageMlocked() for each page returned by
+get_user_pages(). We use TestSetPageMlocked() because the page might already
+be mlocked by another task/VMA and we don't want to do extra work. We
+especially do not want to count an mlocked page more than once in the
+statistics. If the page was already mlocked, mlock_vma_page() need do nothing
+more.
If the page was NOT already mlocked, mlock_vma_page() attempts to isolate the
page from the LRU, as it is likely on the appropriate active or inactive list
-at that time. If the isolate_lru_page() succeeds, mlock_vma_page() will
-putback the page--putback_lru_page()--which will notice that the page is now
-mlocked and divert the page to the zone's unevictable LRU list. If
+at that time. If the isolate_lru_page() succeeds, mlock_vma_page() will put
+back the page - by calling putback_lru_page() - which will notice that the page
+is now mlocked and divert the page to the zone's unevictable list. If
mlock_vma_page() is unable to isolate the page from the LRU, vmscan will handle
-it later if/when it attempts to reclaim the page.
+it later if and when it attempts to reclaim the page.
-Mlocked Pages: Filtering Special Vmas
+FILTERING SPECIAL VMAS
+----------------------
-mlock_fixup() filters several classes of "special" vmas:
+mlock_fixup() filters several classes of "special" VMAs:
-1) vmas with VM_IO|VM_PFNMAP set are skipped entirely. The pages behind
+1) VMAs with VM_IO or VM_PFNMAP set are skipped entirely. The pages behind
these mappings are inherently pinned, so we don't need to mark them as
- mlocked. In any case, most of the pages have no struct page in which to
- so mark the page. Because of this, get_user_pages() will fail for these
- vmas, so there is no sense in attempting to visit them.
-
-2) vmas mapping hugetlbfs page are already effectively pinned into memory.
- We don't need nor want to mlock() these pages. However, to preserve the
- prior behavior of mlock()--before the unevictable/mlock changes--
- mlock_fixup() will call make_pages_present() in the hugetlbfs vma range
- to allocate the huge pages and populate the ptes.
-
-3) vmas with VM_DONTEXPAND|VM_RESERVED are generally user space mappings of
- kernel pages, such as the vdso page, relay channel pages, etc. These pages
+ mlocked. In any case, most of the pages have no struct page in which to so
+ mark the page. Because of this, get_user_pages() will fail for these VMAs,
+ so there is no sense in attempting to visit them.
+
+2) VMAs mapping hugetlbfs page are already effectively pinned into memory. We
+ neither need nor want to mlock() these pages. However, to preserve the
+ prior behavior of mlock() - before the unevictable/mlock changes -
+ mlock_fixup() will call make_pages_present() in the hugetlbfs VMA range to
+ allocate the huge pages and populate the ptes.
+
+3) VMAs with VM_DONTEXPAND or VM_RESERVED are generally userspace mappings of
+ kernel pages, such as the VDSO page, relay channel pages, etc. These pages
are inherently unevictable and are not managed on the LRU lists.
- mlock_fixup() treats these vmas the same as hugetlbfs vmas. It calls
+ mlock_fixup() treats these VMAs the same as hugetlbfs VMAs. It calls
make_pages_present() to populate the ptes.
-Note that for all of these special vmas, mlock_fixup() does not set the
+Note that for all of these special VMAs, mlock_fixup() does not set the
VM_LOCKED flag. Therefore, we won't have to deal with them later during
-munlock() or munmap()--for example, at task exit. Neither does mlock_fixup()
-account these vmas against the task's "locked_vm".
-
-Mlocked Pages: Downgrading the Mmap Semaphore.
-
-mlock_fixup() must be called with the mmap semaphore held for write, because
-it may have to merge or split vmas. However, mlocking a large region of
-memory can take a long time--especially if vmscan must reclaim pages to
-satisfy the regions requirements. Faulting in a large region with the mmap
-semaphore held for write can hold off other faults on the address space, in
-the case of a multi-threaded task. It can also hold off scans of the task's
-address space via /proc. While testing under heavy load, it was observed that
-the ps(1) command could be held off for many minutes while a large segment was
-mlock()ed down.
-
-To address this issue, and to make the system more responsive during mlock()ing
-of large segments, mlock_fixup() downgrades the mmap semaphore to read mode
-during the call to __mlock_vma_pages_range(). This works fine. However, the
-callers of mlock_fixup() expect the semaphore to be returned in write mode.
-So, mlock_fixup() "upgrades" the semphore to write mode. Linux does not
-support an atomic upgrade_sem() call, so mlock_fixup() must drop the semaphore
-and reacquire it in write mode. In a multi-threaded task, it is possible for
-the task memory map to change while the semaphore is dropped. Therefore,
-mlock_fixup() looks up the vma at the range start address after reacquiring
-the semaphore in write mode and verifies that it still covers the original
-range. If not, mlock_fixup() returns an error [-EAGAIN]. All callers of
-mlock_fixup() have been changed to deal with this new error condition.
-
-Note: when munlocking a region, all of the pages should already be resident--
-unless we have racing threads mlocking() and munlocking() regions. So,
-unlocking should not have to wait for page allocations nor faults of any kind.
-Therefore mlock_fixup() does not downgrade the semaphore for munlock().
-
-
-Mlocked Pages: munlock()/munlockall() System Call Handling
-
-The munlock() and munlockall() system calls are handled by the same functions--
-do_mlock[all]()--as the mlock() and mlockall() system calls with the unlock
-vs lock operation indicated by an argument. So, these system calls are also
-handled by mlock_fixup(). Again, if called for an already munlock()ed vma,
-mlock_fixup() simply returns. Because of the vma filtering discussed above,
-VM_LOCKED will not be set in any "special" vmas. So, these vmas will be
+munlock(), munmap() or task exit. Neither does mlock_fixup() account these
+VMAs against the task's "locked_vm".
+
+
+munlock()/munlockall() SYSTEM CALL HANDLING
+-------------------------------------------
+
+The munlock() and munlockall() system calls are handled by the same functions -
+do_mlock[all]() - as the mlock() and mlockall() system calls with the unlock vs
+lock operation indicated by an argument. So, these system calls are also
+handled by mlock_fixup(). Again, if called for an already munlocked VMA,
+mlock_fixup() simply returns. Because of the VMA filtering discussed above,
+VM_LOCKED will not be set in any "special" VMAs. So, these VMAs will be
ignored for munlock.
-If the vma is VM_LOCKED, mlock_fixup() again attempts to merge or split off
-the specified range. The range is then munlocked via the function
-__mlock_vma_pages_range()--the same function used to mlock a vma range--
+If the VMA is VM_LOCKED, mlock_fixup() again attempts to merge or split off the
+specified range. The range is then munlocked via the function
+__mlock_vma_pages_range() - the same function used to mlock a VMA range -
passing a flag to indicate that munlock() is being performed.
-Because the vma access protections could have been changed to PROT_NONE after
+Because the VMA access protections could have been changed to PROT_NONE after
faulting in and mlocking pages, get_user_pages() was unreliable for visiting
-these pages for munlocking. Because we don't want to leave pages mlocked(),
+these pages for munlocking. Because we don't want to leave pages mlocked,
get_user_pages() was enhanced to accept a flag to ignore the permissions when
-fetching the pages--all of which should be resident as a result of previous
-mlock()ing.
+fetching the pages - all of which should be resident as a result of previous
+mlocking.
For munlock(), __mlock_vma_pages_range() unlocks individual pages by calling
munlock_vma_page(). munlock_vma_page() unconditionally clears the PG_mlocked
-flag using TestClearPageMlocked(). As with mlock_vma_page(), munlock_vma_page()
-use the Test*PageMlocked() function to handle the case where the page might
-have already been unlocked by another task. If the page was mlocked,
-munlock_vma_page() updates that zone statistics for the number of mlocked
-pages. Note, however, that at this point we haven't checked whether the page
-is mapped by other VM_LOCKED vmas.
-
-We can't call try_to_munlock(), the function that walks the reverse map to check
-for other VM_LOCKED vmas, without first isolating the page from the LRU.
+flag using TestClearPageMlocked(). As with mlock_vma_page(),
+munlock_vma_page() use the Test*PageMlocked() function to handle the case where
+the page might have already been unlocked by another task. If the page was
+mlocked, munlock_vma_page() updates that zone statistics for the number of
+mlocked pages. Note, however, that at this point we haven't checked whether
+the page is mapped by other VM_LOCKED VMAs.
+
+We can't call try_to_munlock(), the function that walks the reverse map to
+check for other VM_LOCKED VMAs, without first isolating the page from the LRU.
try_to_munlock() is a variant of try_to_unmap() and thus requires that the page
-not be on an lru list. [More on these below.] However, the call to
-isolate_lru_page() could fail, in which case we couldn't try_to_munlock().
-So, we go ahead and clear PG_mlocked up front, as this might be the only chance
-we have. If we can successfully isolate the page, we go ahead and
+not be on an LRU list [more on these below]. However, the call to
+isolate_lru_page() could fail, in which case we couldn't try_to_munlock(). So,
+we go ahead and clear PG_mlocked up front, as this might be the only chance we
+have. If we can successfully isolate the page, we go ahead and
try_to_munlock(), which will restore the PG_mlocked flag and update the zone
-page statistics if it finds another vma holding the page mlocked. If we fail
+page statistics if it finds another VMA holding the page mlocked. If we fail
to isolate the page, we'll have left a potentially mlocked page on the LRU.
-This is fine, because we'll catch it later when/if vmscan tries to reclaim the
-page. This should be relatively rare.
-
-Mlocked Pages: Migrating Them...
-
-A page that is being migrated has been isolated from the lru lists and is
-held locked across unmapping of the page, updating the page's mapping
-[address_space] entry and copying the contents and state, until the
-page table entry has been replaced with an entry that refers to the new
-page. Linux supports migration of mlocked pages and other unevictable
-pages. This involves simply moving the PageMlocked and PageUnevictable states
-from the old page to the new page.
-
-Note that page migration can race with mlocking or munlocking of the same
-page. This has been discussed from the mlock/munlock perspective in the
-respective sections above. Both processes [migration, m[un]locking], hold
-the page locked. This provides the first level of synchronization. Page
-migration zeros out the page_mapping of the old page before unlocking it,
-so m[un]lock can skip these pages by testing the page mapping under page
-lock.
-
-When completing page migration, we place the new and old pages back onto the
-lru after dropping the page lock. The "unneeded" page--old page on success,
-new page on failure--will be freed when the reference count held by the
-migration process is released. To ensure that we don't strand pages on the
-unevictable list because of a race between munlock and migration, page
-migration uses the putback_lru_page() function to add migrated pages back to
-the lru.
-
-
-Mlocked Pages: mmap(MAP_LOCKED) System Call Handling
+This is fine, because we'll catch it later if and if vmscan tries to reclaim
+the page. This should be relatively rare.
+
+
+MIGRATING MLOCKED PAGES
+-----------------------
+
+A page that is being migrated has been isolated from the LRU lists and is held
+locked across unmapping of the page, updating the page's address space entry
+and copying the contents and state, until the page table entry has been
+replaced with an entry that refers to the new page. Linux supports migration
+of mlocked pages and other unevictable pages. This involves simply moving the
+PG_mlocked and PG_unevictable states from the old page to the new page.
+
+Note that page migration can race with mlocking or munlocking of the same page.
+This has been discussed from the mlock/munlock perspective in the respective
+sections above. Both processes (migration and m[un]locking) hold the page
+locked. This provides the first level of synchronization. Page migration
+zeros out the page_mapping of the old page before unlocking it, so m[un]lock
+can skip these pages by testing the page mapping under page lock.
+
+To complete page migration, we place the new and old pages back onto the LRU
+after dropping the page lock. The "unneeded" page - old page on success, new
+page on failure - will be freed when the reference count held by the migration
+process is released. To ensure that we don't strand pages on the unevictable
+list because of a race between munlock and migration, page migration uses the
+putback_lru_page() function to add migrated pages back to the LRU.
+
+
+mmap(MAP_LOCKED) SYSTEM CALL HANDLING
+-------------------------------------
In addition the the mlock()/mlockall() system calls, an application can request
-that a region of memory be mlocked using the MAP_LOCKED flag with the mmap()
+that a region of memory be mlocked supplying the MAP_LOCKED flag to the mmap()
call. Furthermore, any mmap() call or brk() call that expands the heap by a
task that has previously called mlockall() with the MCL_FUTURE flag will result
-in the newly mapped memory being mlocked. Before the unevictable/mlock changes,
-the kernel simply called make_pages_present() to allocate pages and populate
-the page table.
+in the newly mapped memory being mlocked. Before the unevictable/mlock
+changes, the kernel simply called make_pages_present() to allocate pages and
+populate the page table.
To mlock a range of memory under the unevictable/mlock infrastructure, the
mmap() handler and task address space expansion functions call
mlock_vma_pages_range() specifying the vma and the address range to mlock.
-mlock_vma_pages_range() filters vmas like mlock_fixup(), as described above in
-"Mlocked Pages: Filtering Vmas". It will clear the VM_LOCKED flag, which will
-have already been set by the caller, in filtered vmas. Thus these vma's need
-not be visited for munlock when the region is unmapped.
+mlock_vma_pages_range() filters VMAs like mlock_fixup(), as described above in
+"Filtering Special VMAs". It will clear the VM_LOCKED flag, which will have
+already been set by the caller, in filtered VMAs. Thus these VMA's need not be
+visited for munlock when the region is unmapped.
-For "normal" vmas, mlock_vma_pages_range() calls __mlock_vma_pages_range() to
+For "normal" VMAs, mlock_vma_pages_range() calls __mlock_vma_pages_range() to
fault/allocate the pages and mlock them. Again, like mlock_fixup(),
mlock_vma_pages_range() downgrades the mmap semaphore to read mode before
-attempting to fault/allocate and mlock the pages; and "upgrades" the semaphore
+attempting to fault/allocate and mlock the pages and "upgrades" the semaphore
back to write mode before returning.
-The callers of mlock_vma_pages_range() will have already added the memory
-range to be mlocked to the task's "locked_vm". To account for filtered vmas,
+The callers of mlock_vma_pages_range() will have already added the memory range
+to be mlocked to the task's "locked_vm". To account for filtered VMAs,
mlock_vma_pages_range() returns the number of pages NOT mlocked. All of the
-callers then subtract a non-negative return value from the task's locked_vm.
-A negative return value represent an error--for example, from get_user_pages()
-attempting to fault in a vma with PROT_NONE access. In this case, we leave
-the memory range accounted as locked_vm, as the protections could be changed
-later and pages allocated into that region.
+callers then subtract a non-negative return value from the task's locked_vm. A
+negative return value represent an error - for example, from get_user_pages()
+attempting to fault in a VMA with PROT_NONE access. In this case, we leave the
+memory range accounted as locked_vm, as the protections could be changed later
+and pages allocated into that region.
-Mlocked Pages: munmap()/exit()/exec() System Call Handling
+munmap()/exit()/exec() SYSTEM CALL HANDLING
+-------------------------------------------
When unmapping an mlocked region of memory, whether by an explicit call to
munmap() or via an internal unmap from exit() or exec() processing, we must
-munlock the pages if we're removing the last VM_LOCKED vma that maps the pages.
+munlock the pages if we're removing the last VM_LOCKED VMA that maps the pages.
Before the unevictable/mlock changes, mlocking did not mark the pages in any
way, so unmapping them required no processing.
To munlock a range of memory under the unevictable/mlock infrastructure, the
-munmap() hander and task address space tear down function call
+munmap() handler and task address space call tear down function
munlock_vma_pages_all(). The name reflects the observation that one always
-specifies the entire vma range when munlock()ing during unmap of a region.
-Because of the vma filtering when mlocking() regions, only "normal" vmas that
+specifies the entire VMA range when munlock()ing during unmap of a region.
+Because of the VMA filtering when mlocking() regions, only "normal" VMAs that
actually contain mlocked pages will be passed to munlock_vma_pages_all().
-munlock_vma_pages_all() clears the VM_LOCKED vma flag and, like mlock_fixup()
+munlock_vma_pages_all() clears the VM_LOCKED VMA flag and, like mlock_fixup()
for the munlock case, calls __munlock_vma_pages_range() to walk the page table
-for the vma's memory range and munlock_vma_page() each resident page mapped by
-the vma. This effectively munlocks the page, only if this is the last
-VM_LOCKED vma that maps the page.
-
+for the VMA's memory range and munlock_vma_page() each resident page mapped by
+the VMA. This effectively munlocks the page, only if this is the last
+VM_LOCKED VMA that maps the page.
-Mlocked Page: try_to_unmap()
-[Note: the code changes represented by this section are really quite small
-compared to the text to describe what happening and why, and to discuss the
-implications.]
+try_to_unmap()
+--------------
-Pages can, of course, be mapped into multiple vmas. Some of these vmas may
+Pages can, of course, be mapped into multiple VMAs. Some of these VMAs may
have VM_LOCKED flag set. It is possible for a page mapped into one or more
-VM_LOCKED vmas not to have the PG_mlocked flag set and therefore reside on one
-of the active or inactive LRU lists. This could happen if, for example, a
-task in the process of munlock()ing the page could not isolate the page from
-the LRU. As a result, vmscan/shrink_page_list() might encounter such a page
-as described in "Unevictable Pages and Vmscan [shrink_*_list()]". To
-handle this situation, try_to_unmap() has been enhanced to check for VM_LOCKED
-vmas while it is walking a page's reverse map.
+VM_LOCKED VMAs not to have the PG_mlocked flag set and therefore reside on one
+of the active or inactive LRU lists. This could happen if, for example, a task
+in the process of munlocking the page could not isolate the page from the LRU.
+As a result, vmscan/shrink_page_list() might encounter such a page as described
+in section "vmscan's handling of unevictable pages". To handle this situation,
+try_to_unmap() checks for VM_LOCKED VMAs while it is walking a page's reverse
+map.
try_to_unmap() is always called, by either vmscan for reclaim or for page
-migration, with the argument page locked and isolated from the LRU. BUG_ON()
-assertions enforce this requirement. Separate functions handle anonymous and
-mapped file pages, as these types of pages have different reverse map
-mechanisms.
-
- try_to_unmap_anon()
-
-To unmap anonymous pages, each vma in the list anchored in the anon_vma must be
-visited--at least until a VM_LOCKED vma is encountered. If the page is being
-unmapped for migration, VM_LOCKED vmas do not stop the process because mlocked
-pages are migratable. However, for reclaim, if the page is mapped into a
-VM_LOCKED vma, the scan stops. try_to_unmap() attempts to acquire the mmap
-semphore of the mm_struct to which the vma belongs in read mode. If this is
-successful, try_to_unmap() will mlock the page via mlock_vma_page()--we
-wouldn't have gotten to try_to_unmap() if the page were already mlocked--and
-will return SWAP_MLOCK, indicating that the page is unevictable. If the
-mmap semaphore cannot be acquired, we are not sure whether the page is really
-unevictable or not. In this case, try_to_unmap() will return SWAP_AGAIN.
-
- try_to_unmap_file() -- linear mappings
-
-Unmapping of a mapped file page works the same, except that the scan visits
-all vmas that maps the page's index/page offset in the page's mapping's
-reverse map priority search tree. It must also visit each vma in the page's
-mapping's non-linear list, if the list is non-empty. As for anonymous pages,
-on encountering a VM_LOCKED vma for a mapped file page, try_to_unmap() will
-attempt to acquire the associated mm_struct's mmap semaphore to mlock the page,
-returning SWAP_MLOCK if this is successful, and SWAP_AGAIN, if not.
-
- try_to_unmap_file() -- non-linear mappings
-
-If a page's mapping contains a non-empty non-linear mapping vma list, then
-try_to_un{map|lock}() must also visit each vma in that list to determine
-whether the page is mapped in a VM_LOCKED vma. Again, the scan must visit
-all vmas in the non-linear list to ensure that the pages is not/should not be
-mlocked. If a VM_LOCKED vma is found in the list, the scan could terminate.
-However, there is no easy way to determine whether the page is actually mapped
-in a given vma--either for unmapping or testing whether the VM_LOCKED vma
-actually pins the page.
-
-So, try_to_unmap_file() handles non-linear mappings by scanning a certain
-number of pages--a "cluster"--in each non-linear vma associated with the page's
-mapping, for each file mapped page that vmscan tries to unmap. If this happens
-to unmap the page we're trying to unmap, try_to_unmap() will notice this on
-return--(page_mapcount(page) == 0)--and return SWAP_SUCCESS. Otherwise, it
-will return SWAP_AGAIN, causing vmscan to recirculate this page. We take
-advantage of the cluster scan in try_to_unmap_cluster() as follows:
-
-For each non-linear vma, try_to_unmap_cluster() attempts to acquire the mmap
-semaphore of the associated mm_struct for read without blocking. If this
-attempt is successful and the vma is VM_LOCKED, try_to_unmap_cluster() will
-retain the mmap semaphore for the scan; otherwise it drops it here. Then,
-for each page in the cluster, if we're holding the mmap semaphore for a locked
-vma, try_to_unmap_cluster() calls mlock_vma_page() to mlock the page. This
-call is a no-op if the page is already locked, but will mlock any pages in
-the non-linear mapping that happen to be unlocked. If one of the pages so
-mlocked is the page passed in to try_to_unmap(), try_to_unmap_cluster() will
-return SWAP_MLOCK, rather than the default SWAP_AGAIN. This will allow vmscan
-to cull the page, rather than recirculating it on the inactive list. Again,
-if try_to_unmap_cluster() cannot acquire the vma's mmap sem, it returns
-SWAP_AGAIN, indicating that the page is mapped by a VM_LOCKED vma, but
-couldn't be mlocked.
-
-
-Mlocked pages: try_to_munlock() Reverse Map Scan
-
-TODO/FIXME: a better name might be page_mlocked()--analogous to the
-page_referenced() reverse map walker.
-
-When munlock_vma_page()--see "Mlocked Pages: munlock()/munlockall()
-System Call Handling" above--tries to munlock a page, it needs to
-determine whether or not the page is mapped by any VM_LOCKED vma, without
-actually attempting to unmap all ptes from the page. For this purpose, the
-unevictable/mlock infrastructure introduced a variant of try_to_unmap() called
-try_to_munlock().
+migration, with the argument page locked and isolated from the LRU. Separate
+functions handle anonymous and mapped file pages, as these types of pages have
+different reverse map mechanisms.
+
+ (*) try_to_unmap_anon()
+
+ To unmap anonymous pages, each VMA in the list anchored in the anon_vma
+ must be visited - at least until a VM_LOCKED VMA is encountered. If the
+ page is being unmapped for migration, VM_LOCKED VMAs do not stop the
+ process because mlocked pages are migratable. However, for reclaim, if
+ the page is mapped into a VM_LOCKED VMA, the scan stops.
+
+ try_to_unmap_anon() attempts to acquire in read mode the mmap semphore of
+ the mm_struct to which the VMA belongs. If this is successful, it will
+ mlock the page via mlock_vma_page() - we wouldn't have gotten to
+ try_to_unmap_anon() if the page were already mlocked - and will return
+ SWAP_MLOCK, indicating that the page is unevictable.
+
+ If the mmap semaphore cannot be acquired, we are not sure whether the page
+ is really unevictable or not. In this case, try_to_unmap_anon() will
+ return SWAP_AGAIN.
+
+ (*) try_to_unmap_file() - linear mappings
+
+ Unmapping of a mapped file page works the same as for anonymous mappings,
+ except that the scan visits all VMAs that map the page's index/page offset
+ in the page's mapping's reverse map priority search tree. It also visits
+ each VMA in the page's mapping's non-linear list, if the list is
+ non-empty.
+
+ As for anonymous pages, on encountering a VM_LOCKED VMA for a mapped file
+ page, try_to_unmap_file() will attempt to acquire the associated
+ mm_struct's mmap semaphore to mlock the page, returning SWAP_MLOCK if this
+ is successful, and SWAP_AGAIN, if not.
+
+ (*) try_to_unmap_file() - non-linear mappings
+
+ If a page's mapping contains a non-empty non-linear mapping VMA list, then
+ try_to_un{map|lock}() must also visit each VMA in that list to determine
+ whether the page is mapped in a VM_LOCKED VMA. Again, the scan must visit
+ all VMAs in the non-linear list to ensure that the pages is not/should not
+ be mlocked.
+
+ If a VM_LOCKED VMA is found in the list, the scan could terminate.
+ However, there is no easy way to determine whether the page is actually
+ mapped in a given VMA - either for unmapping or testing whether the
+ VM_LOCKED VMA actually pins the page.
+
+ try_to_unmap_file() handles non-linear mappings by scanning a certain
+ number of pages - a "cluster" - in each non-linear VMA associated with the
+ page's mapping, for each file mapped page that vmscan tries to unmap. If
+ this happens to unmap the page we're trying to unmap, try_to_unmap() will
+ notice this on return (page_mapcount(page) will be 0) and return
+ SWAP_SUCCESS. Otherwise, it will return SWAP_AGAIN, causing vmscan to
+ recirculate this page. We take advantage of the cluster scan in
+ try_to_unmap_cluster() as follows:
+
+ For each non-linear VMA, try_to_unmap_cluster() attempts to acquire the
+ mmap semaphore of the associated mm_struct for read without blocking.
+
+ If this attempt is successful and the VMA is VM_LOCKED,
+ try_to_unmap_cluster() will retain the mmap semaphore for the scan;
+ otherwise it drops it here.
+
+ Then, for each page in the cluster, if we're holding the mmap semaphore
+ for a locked VMA, try_to_unmap_cluster() calls mlock_vma_page() to
+ mlock the page. This call is a no-op if the page is already locked,
+ but will mlock any pages in the non-linear mapping that happen to be
+ unlocked.
+
+ If one of the pages so mlocked is the page passed in to try_to_unmap(),
+ try_to_unmap_cluster() will return SWAP_MLOCK, rather than the default
+ SWAP_AGAIN. This will allow vmscan to cull the page, rather than
+ recirculating it on the inactive list.
+
+ Again, if try_to_unmap_cluster() cannot acquire the VMA's mmap sem, it
+ returns SWAP_AGAIN, indicating that the page is mapped by a VM_LOCKED
+ VMA, but couldn't be mlocked.
+
+
+try_to_munlock() REVERSE MAP SCAN
+---------------------------------
+
+ [!] TODO/FIXME: a better name might be page_mlocked() - analogous to the
+ page_referenced() reverse map walker.
+
+When munlock_vma_page() [see section "munlock()/munlockall() System Call
+Handling" above] tries to munlock a page, it needs to determine whether or not
+the page is mapped by any VM_LOCKED VMA without actually attempting to unmap
+all PTEs from the page. For this purpose, the unevictable/mlock infrastructure
+introduced a variant of try_to_unmap() called try_to_munlock().
try_to_munlock() calls the same functions as try_to_unmap() for anonymous and
mapped file pages with an additional argument specifing unlock versus unmap
processing. Again, these functions walk the respective reverse maps looking
-for VM_LOCKED vmas. When such a vma is found for anonymous pages and file
+for VM_LOCKED VMAs. When such a VMA is found for anonymous pages and file
pages mapped in linear VMAs, as in the try_to_unmap() case, the functions
attempt to acquire the associated mmap semphore, mlock the page via
mlock_vma_page() and return SWAP_MLOCK. This effectively undoes the
pre-clearing of the page's PG_mlocked done by munlock_vma_page.
-If try_to_unmap() is unable to acquire a VM_LOCKED vma's associated mmap
-semaphore, it will return SWAP_AGAIN. This will allow shrink_page_list()
-to recycle the page on the inactive list and hope that it has better luck
-with the page next time.
-
-For file pages mapped into non-linear vmas, the try_to_munlock() logic works
-slightly differently. On encountering a VM_LOCKED non-linear vma that might
-map the page, try_to_munlock() returns SWAP_AGAIN without actually mlocking
-the page. munlock_vma_page() will just leave the page unlocked and let
-vmscan deal with it--the usual fallback position.
-
-Note that try_to_munlock()'s reverse map walk must visit every vma in a pages'
-reverse map to determine that a page is NOT mapped into any VM_LOCKED vma.
-However, the scan can terminate when it encounters a VM_LOCKED vma and can
-successfully acquire the vma's mmap semphore for read and mlock the page.
-Although try_to_munlock() can be called many [very many!] times when
-munlock()ing a large region or tearing down a large address space that has been
-mlocked via mlockall(), overall this is a fairly rare event.
-
-Mlocked Page: Page Reclaim in shrink_*_list()
-
-shrink_active_list() culls any obviously unevictable pages--i.e.,
-!page_evictable(page, NULL)--diverting these to the unevictable lru
-list. However, shrink_active_list() only sees unevictable pages that
-made it onto the active/inactive lru lists. Note that these pages do not
-have PageUnevictable set--otherwise, they would be on the unevictable list and
-shrink_active_list would never see them.
+If try_to_unmap() is unable to acquire a VM_LOCKED VMA's associated mmap
+semaphore, it will return SWAP_AGAIN. This will allow shrink_page_list() to
+recycle the page on the inactive list and hope that it has better luck with the
+page next time.
+
+For file pages mapped into non-linear VMAs, the try_to_munlock() logic works
+slightly differently. On encountering a VM_LOCKED non-linear VMA that might
+map the page, try_to_munlock() returns SWAP_AGAIN without actually mlocking the
+page. munlock_vma_page() will just leave the page unlocked and let vmscan deal
+with it - the usual fallback position.
+
+Note that try_to_munlock()'s reverse map walk must visit every VMA in a page's
+reverse map to determine that a page is NOT mapped into any VM_LOCKED VMA.
+However, the scan can terminate when it encounters a VM_LOCKED VMA and can
+successfully acquire the VMA's mmap semphore for read and mlock the page.
+Although try_to_munlock() might be called a great many times when munlocking a
+large region or tearing down a large address space that has been mlocked via
+mlockall(), overall this is a fairly rare event.
+
+
+PAGE RECLAIM IN shrink_*_list()
+-------------------------------
+
+shrink_active_list() culls any obviously unevictable pages - i.e.
+!page_evictable(page, NULL) - diverting these to the unevictable list.
+However, shrink_active_list() only sees unevictable pages that made it onto the
+active/inactive lru lists. Note that these pages do not have PageUnevictable
+set - otherwise they would be on the unevictable list and shrink_active_list
+would never see them.
Some examples of these unevictable pages on the LRU lists are:
-1) ramfs pages that have been placed on the lru lists when first allocated.
+ (1) ramfs pages that have been placed on the LRU lists when first allocated.
+
+ (2) SHM_LOCK'd shared memory pages. shmctl(SHM_LOCK) does not attempt to
+ allocate or fault in the pages in the shared memory region. This happens
+ when an application accesses the page the first time after SHM_LOCK'ing
+ the segment.
-2) SHM_LOCKed shared memory pages. shmctl(SHM_LOCK) does not attempt to
- allocate or fault in the pages in the shared memory region. This happens
- when an application accesses the page the first time after SHM_LOCKing
- the segment.
+ (3) mlocked pages that could not be isolated from the LRU and moved to the
+ unevictable list in mlock_vma_page().
-3) Mlocked pages that could not be isolated from the lru and moved to the
- unevictable list in mlock_vma_page().
+ (4) Pages mapped into multiple VM_LOCKED VMAs, but try_to_munlock() couldn't
+ acquire the VMA's mmap semaphore to test the flags and set PageMlocked.
+ munlock_vma_page() was forced to let the page back on to the normal LRU
+ list for vmscan to handle.
-3) Pages mapped into multiple VM_LOCKED vmas, but try_to_munlock() couldn't
- acquire the vma's mmap semaphore to test the flags and set PageMlocked.
- munlock_vma_page() was forced to let the page back on to the normal
- LRU list for vmscan to handle.
+shrink_inactive_list() also diverts any unevictable pages that it finds on the
+inactive lists to the appropriate zone's unevictable list.
-shrink_inactive_list() also culls any unevictable pages that it finds on
-the inactive lists, again diverting them to the appropriate zone's unevictable
-lru list. shrink_inactive_list() should only see SHM_LOCKed pages that became
-SHM_LOCKed after shrink_active_list() had moved them to the inactive list, or
-pages mapped into VM_LOCKED vmas that munlock_vma_page() couldn't isolate from
-the lru to recheck via try_to_munlock(). shrink_inactive_list() won't notice
-the latter, but will pass on to shrink_page_list().
+shrink_inactive_list() should only see SHM_LOCK'd pages that became SHM_LOCK'd
+after shrink_active_list() had moved them to the inactive list, or pages mapped
+into VM_LOCKED VMAs that munlock_vma_page() couldn't isolate from the LRU to
+recheck via try_to_munlock(). shrink_inactive_list() won't notice the latter,
+but will pass on to shrink_page_list().
shrink_page_list() again culls obviously unevictable pages that it could
encounter for similar reason to shrink_inactive_list(). Pages mapped into
-VM_LOCKED vmas but without PG_mlocked set will make it all the way to
+VM_LOCKED VMAs but without PG_mlocked set will make it all the way to
try_to_unmap(). shrink_page_list() will divert them to the unevictable list
when try_to_unmap() returns SWAP_MLOCK, as discussed above.
AMD MICROCODE UPDATE SUPPORT
P: Andreas Herrmann
-M: andeas.herrmann3@amd.com
+M: andreas.herrmann3@amd.com
L: amd64-microcode@amd64.org
S: Supported
F: arch/x86/kernel/microcode_amd.c
EDAC-CORE
P: Doug Thompson
M: dougthompson@xmission.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Supported
F: Documentation/edac.txt
P: Doug Thompson
M: mark.gross@intel.com
M: dougthompson@xmission.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/e752x_edac.c
EDAC-E7XXX
P: Doug Thompson
M: dougthompson@xmission.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/e7xxx_edac.c
EDAC-I82443BXGX
P: Tim Small
M: tim@buttersideup.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i82443bxgx_edac.c
EDAC-I3000
P: Jason Uhlenkott
M: juhlenko@akamai.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i3000_edac.c
EDAC-I5000
P: Doug Thompson
M: dougthompson@xmission.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i5000_edac.c
EDAC-I5400
P: Mauro Carvalho Chehab
M: mchehab@redhat.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i5400_edac.c
P: Arvind R.
M: rdesikan@jetzbroadband.com
M: arvind@acarlab.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i82975x_edac.c
EDAC-PASEMI
P: Egor Martovetsky
M: egor@pasemi.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/pasemi_edac.c
EDAC-R82600
P: Tim Small
M: tim@buttersideup.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/r82600_edac.c
F: fs/hpfs/
HSO 3G MODEM DRIVER
-P: Denis Joseph Barrow
-M: d.barow@option.com
+P: Jan Dumon
+M: j.dumon@option.com
W: http://www.pharscape.org
S: Maintained
F: drivers/net/usb/hso.c
F: Documentation/sgi-visws.txt
SGI XP/XPC/XPNET DRIVER
-P: Dean Nelson
-M: dcn@sgi.com
+P: Robin Holt
+M: holt@sgi.com
S: Maintained
F: drivers/misc/sgi-xp/
.power = 50, /* up to 100 mA */
};
-static u64 musb_dmamask = DMA_32BIT_MASK;
+static u64 musb_dmamask = DMA_BIT_MASK(32);
static struct platform_device musb_device = {
.name = "musb_hdrc",
.id = -1,
.dev = {
.dma_mask = &musb_dmamask,
- .coherent_dma_mask = DMA_32BIT_MASK,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &musb_plat,
},
.num_resources = ARRAY_SIZE(musb_resources),
};
#ifdef CONFIG_NOP_USB_XCEIV
-static u64 nop_xceiv_dmamask = DMA_32BIT_MASK;
+static u64 nop_xceiv_dmamask = DMA_BIT_MASK(32);
static struct platform_device nop_xceiv_device = {
.name = "nop_usb_xceiv",
.id = -1,
.dev = {
.dma_mask = &nop_xceiv_dmamask,
- .coherent_dma_mask = DMA_32BIT_MASK,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = NULL,
},
};
static void *ia64_swiotlb_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t gfp)
{
- if (dev->coherent_dma_mask != DMA_64BIT_MASK)
+ if (dev->coherent_dma_mask != DMA_BIT_MASK(64))
gfp |= GFP_DMA;
return swiotlb_alloc_coherent(dev, size, dma_handle, gfp);
}
prop = of_get_property(np, "interrupts", NULL);
if (!prop)
continue;
- if (parport_pc_probe_port(io1, io2, prop[0], autodma, NULL) != NULL)
+ if (parport_pc_probe_port(io1, io2, prop[0], autodma, NULL, 0) != NULL)
count++;
}
return count;
if (!strcmp(parent->name, "dma")) {
p = parport_pc_probe_port(base, base + 0x400,
op->irqs[0], PARPORT_DMA_NOFIFO,
- op->dev.parent->parent);
+ op->dev.parent->parent, 0);
if (!p)
return -ENOMEM;
dev_set_drvdata(&op->dev, p);
p = parport_pc_probe_port(base, base + 0x400,
op->irqs[0],
slot,
- op->dev.parent);
+ op->dev.parent,
+ 0);
err = -ENOMEM;
if (!p)
goto out_disable_irq;
#ifdef CONFIG_X86_64
#define NEED_PSE 0
#define NEED_MSR (1<<(X86_FEATURE_MSR & 31))
-#define NEED_PGE (1<<(X86_FEATURE_PGE & 31))
+#define NEED_PGE 0
#define NEED_FXSR (1<<(X86_FEATURE_FXSR & 31))
#define NEED_XMM (1<<(X86_FEATURE_XMM & 31))
#define NEED_XMM2 (1<<(X86_FEATURE_XMM2 & 31))
/* VIRT <-> MACHINE conversion */
#define virt_to_machine(v) (phys_to_machine(XPADDR(__pa(v))))
-#define virt_to_mfn(v) (pfn_to_mfn(PFN_DOWN(__pa(v))))
+#define virt_to_pfn(v) (PFN_DOWN(__pa(v)))
+#define virt_to_mfn(v) (pfn_to_mfn(virt_to_pfn(v)))
#define mfn_to_virt(m) (__va(mfn_to_pfn(m) << PAGE_SHIFT))
static inline unsigned long pte_mfn(pte_t pte)
unsigned int perf_percent;
unsigned int retval;
- if (smp_call_function_single(cpu, read_measured_perf_ctrs, &cur, 1))
+ if (smp_call_function_single(cpu, read_measured_perf_ctrs, &readin, 1))
return 0;
cur.aperf.whole = readin.aperf.whole -
#include <asm/xen/hypervisor.h>
#include <asm/fixmap.h>
#include <asm/processor.h>
+#include <asm/proto.h>
#include <asm/msr-index.h>
#include <asm/setup.h>
#include <asm/desc.h>
xen_feature(XENFEAT_mmu_pt_update_preserve_ad) ? " (preserve-AD)" : "");
}
+static __read_mostly unsigned int cpuid_leaf1_edx_mask = ~0;
+static __read_mostly unsigned int cpuid_leaf1_ecx_mask = ~0;
+
static void xen_cpuid(unsigned int *ax, unsigned int *bx,
unsigned int *cx, unsigned int *dx)
{
+ unsigned maskecx = ~0;
unsigned maskedx = ~0;
/*
* Mask out inconvenient features, to try and disable as many
* unsupported kernel subsystems as possible.
*/
- if (*ax == 1)
- maskedx = ~((1 << X86_FEATURE_APIC) | /* disable APIC */
- (1 << X86_FEATURE_ACPI) | /* disable ACPI */
- (1 << X86_FEATURE_MCE) | /* disable MCE */
- (1 << X86_FEATURE_MCA) | /* disable MCA */
- (1 << X86_FEATURE_ACC)); /* thermal monitoring */
+ if (*ax == 1) {
+ maskecx = cpuid_leaf1_ecx_mask;
+ maskedx = cpuid_leaf1_edx_mask;
+ }
asm(XEN_EMULATE_PREFIX "cpuid"
: "=a" (*ax),
"=c" (*cx),
"=d" (*dx)
: "0" (*ax), "2" (*cx));
+
+ *cx &= maskecx;
*dx &= maskedx;
}
+static __init void xen_init_cpuid_mask(void)
+{
+ unsigned int ax, bx, cx, dx;
+
+ cpuid_leaf1_edx_mask =
+ ~((1 << X86_FEATURE_MCE) | /* disable MCE */
+ (1 << X86_FEATURE_MCA) | /* disable MCA */
+ (1 << X86_FEATURE_ACC)); /* thermal monitoring */
+
+ if (!xen_initial_domain())
+ cpuid_leaf1_edx_mask &=
+ ~((1 << X86_FEATURE_APIC) | /* disable local APIC */
+ (1 << X86_FEATURE_ACPI)); /* disable ACPI */
+
+ ax = 1;
+ xen_cpuid(&ax, &bx, &cx, &dx);
+
+ /* cpuid claims we support xsave; try enabling it to see what happens */
+ if (cx & (1 << (X86_FEATURE_XSAVE % 32))) {
+ unsigned long cr4;
+
+ set_in_cr4(X86_CR4_OSXSAVE);
+
+ cr4 = read_cr4();
+
+ if ((cr4 & X86_CR4_OSXSAVE) == 0)
+ cpuid_leaf1_ecx_mask &= ~(1 << (X86_FEATURE_XSAVE % 32));
+
+ clear_in_cr4(X86_CR4_OSXSAVE);
+ }
+}
+
static void xen_set_debugreg(int reg, unsigned long val)
{
HYPERVISOR_set_debugreg(reg, val);
static void xen_load_gdt(const struct desc_ptr *dtr)
{
- unsigned long *frames;
unsigned long va = dtr->address;
unsigned int size = dtr->size + 1;
unsigned pages = (size + PAGE_SIZE - 1) / PAGE_SIZE;
+ unsigned long frames[pages];
int f;
- struct multicall_space mcs;
/* A GDT can be up to 64k in size, which corresponds to 8192
8-byte entries, or 16 4k pages.. */
BUG_ON(size > 65536);
BUG_ON(va & ~PAGE_MASK);
- mcs = xen_mc_entry(sizeof(*frames) * pages);
- frames = mcs.args;
-
for (f = 0; va < dtr->address + size; va += PAGE_SIZE, f++) {
- frames[f] = arbitrary_virt_to_mfn((void *)va);
+ int level;
+ pte_t *ptep = lookup_address(va, &level);
+ unsigned long pfn, mfn;
+ void *virt;
+
+ BUG_ON(ptep == NULL);
+
+ pfn = pte_pfn(*ptep);
+ mfn = pfn_to_mfn(pfn);
+ virt = __va(PFN_PHYS(pfn));
+
+ frames[f] = mfn;
make_lowmem_page_readonly((void *)va);
- make_lowmem_page_readonly(mfn_to_virt(frames[f]));
+ make_lowmem_page_readonly(virt);
}
- MULTI_set_gdt(mcs.mc, frames, size / sizeof(struct desc_struct));
-
- xen_mc_issue(PARAVIRT_LAZY_CPU);
+ if (HYPERVISOR_set_gdt(frames, size / sizeof(struct desc_struct)))
+ BUG();
}
static void load_TLS_descriptor(struct thread_struct *t,
static int cvt_gate_to_trap(int vector, const gate_desc *val,
struct trap_info *info)
{
- if (val->type != 0xf && val->type != 0xe)
+ if (val->type != GATE_TRAP && val->type != GATE_INTERRUPT)
return 0;
info->vector = vector;
info->cs = gate_segment(*val);
info->flags = val->dpl;
/* interrupt gates clear IF */
- if (val->type == 0xe)
- info->flags |= 4;
+ if (val->type == GATE_INTERRUPT)
+ info->flags |= 1 << 2;
return 1;
}
.emergency_restart = xen_emergency_restart,
};
-
/* First C function to be called on Xen boot */
asmlinkage void __init xen_start_kernel(void)
{
xen_init_irq_ops();
+ xen_init_cpuid_mask();
+
#ifdef CONFIG_X86_LOCAL_APIC
/*
* set up the basic apic ops.
if (!xen_initial_domain())
__supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
+#ifdef CONFIG_X86_64
+ /* Work out if we support NX */
+ check_efer();
+#endif
+
/* Don't do the full vcpu_info placement stuff until we have a
possible map and a non-dummy shared_info. */
per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
}
/* Build the parallel p2m_top_mfn structures */
-void xen_setup_mfn_list_list(void)
+static void __init xen_build_mfn_list_list(void)
{
unsigned pfn, idx;
unsigned topidx = idx * P2M_ENTRIES_PER_PAGE;
p2m_top_mfn_list[idx] = virt_to_mfn(&p2m_top_mfn[topidx]);
}
+}
+void xen_setup_mfn_list_list(void)
+{
BUG_ON(HYPERVISOR_shared_info == &xen_dummy_shared_info);
HYPERVISOR_shared_info->arch.pfn_to_mfn_frame_list_list =
p2m_top[topidx] = &mfn_list[pfn];
}
+
+ xen_build_mfn_list_list();
}
unsigned long get_phys_to_machine(unsigned long pfn)
}
EXPORT_SYMBOL_GPL(get_phys_to_machine);
-static void alloc_p2m(unsigned long **pp, unsigned long *mfnp)
+/* install a new p2m_top page */
+bool install_p2mtop_page(unsigned long pfn, unsigned long *p)
{
- unsigned long *p;
+ unsigned topidx = p2m_top_index(pfn);
+ unsigned long **pfnp, *mfnp;
unsigned i;
- p = (void *)__get_free_page(GFP_KERNEL | __GFP_NOFAIL);
- BUG_ON(p == NULL);
+ pfnp = &p2m_top[topidx];
+ mfnp = &p2m_top_mfn[topidx];
for (i = 0; i < P2M_ENTRIES_PER_PAGE; i++)
p[i] = INVALID_P2M_ENTRY;
- if (cmpxchg(pp, p2m_missing, p) != p2m_missing)
- free_page((unsigned long)p);
- else
+ if (cmpxchg(pfnp, p2m_missing, p) == p2m_missing) {
*mfnp = virt_to_mfn(p);
+ return true;
+ }
+
+ return false;
}
-void set_phys_to_machine(unsigned long pfn, unsigned long mfn)
+static void alloc_p2m(unsigned long pfn)
{
- unsigned topidx, idx;
+ unsigned long *p;
- if (unlikely(xen_feature(XENFEAT_auto_translated_physmap))) {
- BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY);
- return;
- }
+ p = (void *)__get_free_page(GFP_KERNEL | __GFP_NOFAIL);
+ BUG_ON(p == NULL);
+
+ if (!install_p2mtop_page(pfn, p))
+ free_page((unsigned long)p);
+}
+
+/* Try to install p2m mapping; fail if intermediate bits missing */
+bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn)
+{
+ unsigned topidx, idx;
if (unlikely(pfn >= MAX_DOMAIN_PAGES)) {
BUG_ON(mfn != INVALID_P2M_ENTRY);
- return;
+ return true;
}
topidx = p2m_top_index(pfn);
if (p2m_top[topidx] == p2m_missing) {
- /* no need to allocate a page to store an invalid entry */
if (mfn == INVALID_P2M_ENTRY)
- return;
- alloc_p2m(&p2m_top[topidx], &p2m_top_mfn[topidx]);
+ return true;
+ return false;
}
idx = p2m_index(pfn);
p2m_top[topidx][idx] = mfn;
+
+ return true;
+}
+
+void set_phys_to_machine(unsigned long pfn, unsigned long mfn)
+{
+ if (unlikely(xen_feature(XENFEAT_auto_translated_physmap))) {
+ BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY);
+ return;
+ }
+
+ if (unlikely(!__set_phys_to_machine(pfn, mfn))) {
+ alloc_p2m(pfn);
+
+ if (!__set_phys_to_machine(pfn, mfn))
+ BUG();
+ }
}
unsigned long arbitrary_virt_to_mfn(void *vaddr)
return 0;
}
-void __init xen_mark_init_mm_pinned(void)
+static void __init xen_mark_init_mm_pinned(void)
{
xen_pgd_walk(&init_mm, xen_mark_pinned, FIXADDR_TOP);
}
} *args;
struct multicall_space mcs;
- BUG_ON(cpumask_empty(cpus));
- BUG_ON(!mm);
+ if (cpumask_empty(cpus))
+ return; /* nothing to do */
mcs = xen_mc_entry(sizeof(*args));
args = mcs.args;
}
#endif
+static void pin_pagetable_pfn(unsigned cmd, unsigned long pfn)
+{
+ struct mmuext_op op;
+ op.cmd = cmd;
+ op.arg1.mfn = pfn_to_mfn(pfn);
+ if (HYPERVISOR_mmuext_op(&op, 1, NULL, DOMID_SELF))
+ BUG();
+}
+
/* Early in boot, while setting up the initial pagetable, assume
everything is pinned. */
static __init void xen_alloc_pte_init(struct mm_struct *mm, unsigned long pfn)
{
+#ifdef CONFIG_FLATMEM
+ BUG_ON(mem_map); /* should only be used early */
+#endif
+ make_lowmem_page_readonly(__va(PFN_PHYS(pfn)));
+ pin_pagetable_pfn(MMUEXT_PIN_L1_TABLE, pfn);
+}
+
+/* Used for pmd and pud */
+static __init void xen_alloc_pmd_init(struct mm_struct *mm, unsigned long pfn)
+{
#ifdef CONFIG_FLATMEM
BUG_ON(mem_map); /* should only be used early */
#endif
/* Early release_pte assumes that all pts are pinned, since there's
only init_mm and anything attached to that is pinned. */
-static void xen_release_pte_init(unsigned long pfn)
+static __init void xen_release_pte_init(unsigned long pfn)
{
+ pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, pfn);
make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
}
-static void pin_pagetable_pfn(unsigned cmd, unsigned long pfn)
+static __init void xen_release_pmd_init(unsigned long pfn)
{
- struct mmuext_op op;
- op.cmd = cmd;
- op.arg1.mfn = pfn_to_mfn(pfn);
- if (HYPERVISOR_mmuext_op(&op, 1, NULL, DOMID_SELF))
- BUG();
+ make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
}
/* This needs to make sure the new pte page is pinned iff its being
#ifdef CONFIG_X86_LOCAL_APIC
case FIX_APIC_BASE: /* maps dummy local APIC */
#endif
+ case FIX_TEXT_POKE0:
+ case FIX_TEXT_POKE1:
+ /* All local page mappings */
pte = pfn_pte(phys, prot);
break;
xen_mark_init_mm_pinned();
}
-
const struct pv_mmu_ops xen_mmu_ops __initdata = {
.pagetable_setup_start = xen_pagetable_setup_start,
.pagetable_setup_done = xen_pagetable_setup_done,
.alloc_pte = xen_alloc_pte_init,
.release_pte = xen_release_pte_init,
- .alloc_pmd = xen_alloc_pte_init,
+ .alloc_pmd = xen_alloc_pmd_init,
.alloc_pmd_clone = paravirt_nop,
- .release_pmd = xen_release_pte_init,
+ .release_pmd = xen_release_pmd_init,
#ifdef CONFIG_HIGHPTE
.kmap_atomic_pte = xen_kmap_atomic_pte,
.make_pud = PV_CALLEE_SAVE(xen_make_pud),
.set_pgd = xen_set_pgd_hyper,
- .alloc_pud = xen_alloc_pte_init,
- .release_pud = xen_release_pte_init,
+ .alloc_pud = xen_alloc_pmd_init,
+ .release_pud = xen_release_pmd_init,
#endif /* PAGETABLE_LEVELS == 4 */
.activate_mm = xen_activate_mm,
};
+bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn);
+bool install_p2mtop_page(unsigned long pfn, unsigned long *p);
+
void set_pte_mfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags);
BUG_ON(rc);
while(per_cpu(cpu_state, cpu) != CPU_ONLINE) {
- HYPERVISOR_sched_op(SCHEDOP_yield, 0);
+ HYPERVISOR_sched_op(SCHEDOP_yield, NULL);
barrier();
}
/* Make sure other vcpus get a chance to run if they need to. */
for_each_cpu(cpu, mask) {
if (xen_vcpu_stolen(cpu)) {
- HYPERVISOR_sched_op(SCHEDOP_yield, 0);
+ HYPERVISOR_sched_op(SCHEDOP_yield, NULL);
break;
}
}
bool xen_vcpu_stolen(int vcpu);
-void xen_mark_init_mm_pinned(void);
-
void xen_setup_vcpu_info_placement(void);
#ifdef CONFIG_SMP
goto out;
}
- err = pci_set_dma_mask(dev, DMA_32BIT_MASK);
+ err = pci_set_dma_mask(dev, DMA_BIT_MASK(32));
if (err) {
dev_warn(&dev->dev, "Failed to set 32-bit DMA mask\n");
goto out;
/* The Inbound Post Queue only accepts 32-bit physical addresses for the
CCISS commands, so they must be allocated from the lower 4GiB of
memory. */
- err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (err) {
iounmap(vaddr);
return -ENOMEM;
{ PCI_DEVICE_ID_INTEL_82845G_HB, PCI_DEVICE_ID_INTEL_82845G_IG, 0, "830M",
&intel_845_driver, &intel_830_driver },
{ PCI_DEVICE_ID_INTEL_82850_HB, 0, 0, "i850", &intel_850_driver, NULL },
+ { PCI_DEVICE_ID_INTEL_82854_HB, PCI_DEVICE_ID_INTEL_82854_IG, 0, "854",
+ &intel_845_driver, &intel_830_driver },
{ PCI_DEVICE_ID_INTEL_82855PM_HB, 0, 0, "855PM", &intel_845_driver, NULL },
{ PCI_DEVICE_ID_INTEL_82855GM_HB, PCI_DEVICE_ID_INTEL_82855GM_IG, 0, "855GM",
&intel_845_driver, &intel_830_driver },
ID(PCI_DEVICE_ID_INTEL_82845_HB),
ID(PCI_DEVICE_ID_INTEL_82845G_HB),
ID(PCI_DEVICE_ID_INTEL_82850_HB),
+ ID(PCI_DEVICE_ID_INTEL_82854_HB),
ID(PCI_DEVICE_ID_INTEL_82855PM_HB),
ID(PCI_DEVICE_ID_INTEL_82855GM_HB),
ID(PCI_DEVICE_ID_INTEL_82860_HB),
#include <linux/vt_kern.h>
#include <linux/workqueue.h>
#include <linux/kexec.h>
-#include <linux/interrupt.h>
#include <linux/hrtimer.h>
#include <linux/oom.h>
pci_write_config_word(pdev, offset, value);
}
-/* write all or some bits in a dword-register*/
+/*
+ * pci_write_bits32
+ *
+ * edac local routine to do pci_write_config_dword, but adds
+ * a mask parameter. If mask is all ones, ignore the mask.
+ * Otherwise utilize the mask to isolate specified bits
+ *
+ * write all or some bits in a dword-register
+ */
static inline void pci_write_bits32(struct pci_dev *pdev, int offset,
u32 value, u32 mask)
{
- if (mask != 0xffff) {
+ if (mask != 0xffffffff) {
u32 buf;
pci_read_config_dword(pdev, offset, &buf);
*/
static void edac_device_workq_function(struct work_struct *work_req)
{
- struct delayed_work *d_work = (struct delayed_work *)work_req;
+ struct delayed_work *d_work = to_delayed_work(work_req);
struct edac_device_ctl_info *edac_dev = to_edac_device_ctl_work(d_work);
mutex_lock(&device_ctls_mutex);
*/
static void edac_mc_workq_function(struct work_struct *work_req)
{
- struct delayed_work *d_work = (struct delayed_work *)work_req;
+ struct delayed_work *d_work = to_delayed_work(work_req);
struct mem_ctl_info *mci = to_edac_mem_ctl_work(d_work);
mutex_lock(&mem_ctls_mutex);
*/
static void edac_pci_workq_function(struct work_struct *work_req)
{
- struct delayed_work *d_work = (struct delayed_work *)work_req;
+ struct delayed_work *d_work = to_delayed_work(work_req);
struct edac_pci_ctl_info *pci = to_edac_pci_ctl_work(d_work);
int msec;
unsigned long delay;
These devices are hard to detect and rarely found on mainstream
hardware. If unsure, say N.
+config SENSORS_SHT15
+ tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
+ depends on GENERIC_GPIO
+ help
+ If you say yes here you get support for the Sensiron SHT10, SHT11,
+ SHT15, SHT71, SHT75 humidity and temperature sensors.
+
+ This driver can also be built as a module. If so, the module
+ will be called sht15.
+
config SENSORS_SIS5595
tristate "Silicon Integrated Systems Corp. SiS5595"
depends on PCI
obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
+obj-$(CONFIG_SENSORS_SHT15) += sht15.o
obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o
obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o
#include <linux/wait.h>
#include <linux/poll.h>
#include <linux/freezer.h>
-#include <linux/version.h>
#include <linux/uaccess.h>
#include <linux/leds.h>
#include <acpi/acpi_drivers.h>
--- /dev/null
+/*
+ * sht15.c - support for the SHT15 Temperature and Humidity Sensor
+ *
+ * Copyright (c) 2009 Jonathan Cameron
+ *
+ * Copyright (c) 2007 Wouter Horre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Currently ignoring checksum on readings.
+ * Default resolution only (14bit temp, 12bit humidity)
+ * Ignoring battery status.
+ * Heater not enabled.
+ * Timings are all conservative.
+ *
+ * Data sheet available (1/2009) at
+ * http://www.sensirion.ch/en/pdf/product_information/Datasheet-humidity-sensor-SHT1x.pdf
+ *
+ * Regulator supply name = vcc
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/err.h>
+#include <linux/sht15.h>
+#include <linux/regulator/consumer.h>
+#include <asm/atomic.h>
+
+#define SHT15_MEASURE_TEMP 3
+#define SHT15_MEASURE_RH 5
+
+#define SHT15_READING_NOTHING 0
+#define SHT15_READING_TEMP 1
+#define SHT15_READING_HUMID 2
+
+/* Min timings in nsecs */
+#define SHT15_TSCKL 100 /* clock low */
+#define SHT15_TSCKH 100 /* clock high */
+#define SHT15_TSU 150 /* data setup time */
+
+/**
+ * struct sht15_temppair - elements of voltage dependant temp calc
+ * @vdd: supply voltage in microvolts
+ * @d1: see data sheet
+ */
+struct sht15_temppair {
+ int vdd; /* microvolts */
+ int d1;
+};
+
+/* Table 9 from data sheet - relates temperature calculation
+ * to supply voltage.
+ */
+static const struct sht15_temppair temppoints[] = {
+ { 2500000, -39400 },
+ { 3000000, -39600 },
+ { 3500000, -39700 },
+ { 4000000, -39800 },
+ { 5000000, -40100 },
+};
+
+/**
+ * struct sht15_data - device instance specific data
+ * @pdata: platform data (gpio's etc)
+ * @read_work: bh of interrupt handler
+ * @wait_queue: wait queue for getting values from device
+ * @val_temp: last temperature value read from device
+ * @val_humid: last humidity value read from device
+ * @flag: status flag used to identify what the last request was
+ * @valid: are the current stored values valid (start condition)
+ * @last_updat: time of last update
+ * @read_lock: mutex to ensure only one read in progress
+ * at a time.
+ * @dev: associate device structure
+ * @hwmon_dev: device associated with hwmon subsystem
+ * @reg: associated regulator (if specified)
+ * @nb: notifier block to handle notifications of voltage changes
+ * @supply_uV: local copy of supply voltage used to allow
+ * use of regulator consumer if available
+ * @supply_uV_valid: indicates that an updated value has not yet
+ * been obtained from the regulator and so any calculations
+ * based upon it will be invalid.
+ * @update_supply_work: work struct that is used to update the supply_uV
+ * @interrupt_handled: flag used to indicate a hander has been scheduled
+ */
+struct sht15_data {
+ struct sht15_platform_data *pdata;
+ struct work_struct read_work;
+ wait_queue_head_t wait_queue;
+ uint16_t val_temp;
+ uint16_t val_humid;
+ u8 flag;
+ u8 valid;
+ unsigned long last_updat;
+ struct mutex read_lock;
+ struct device *dev;
+ struct device *hwmon_dev;
+ struct regulator *reg;
+ struct notifier_block nb;
+ int supply_uV;
+ int supply_uV_valid;
+ struct work_struct update_supply_work;
+ atomic_t interrupt_handled;
+};
+
+/**
+ * sht15_connection_reset() - reset the comms interface
+ * @data: sht15 specific data
+ *
+ * This implements section 3.4 of the data sheet
+ */
+static void sht15_connection_reset(struct sht15_data *data)
+{
+ int i;
+ gpio_direction_output(data->pdata->gpio_data, 1);
+ ndelay(SHT15_TSCKL);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL);
+ for (i = 0; i < 9; ++i) {
+ gpio_set_value(data->pdata->gpio_sck, 1);
+ ndelay(SHT15_TSCKH);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL);
+ }
+}
+/**
+ * sht15_send_bit() - send an individual bit to the device
+ * @data: device state data
+ * @val: value of bit to be sent
+ **/
+static inline void sht15_send_bit(struct sht15_data *data, int val)
+{
+
+ gpio_set_value(data->pdata->gpio_data, val);
+ ndelay(SHT15_TSU);
+ gpio_set_value(data->pdata->gpio_sck, 1);
+ ndelay(SHT15_TSCKH);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL); /* clock low time */
+}
+
+/**
+ * sht15_transmission_start() - specific sequence for new transmission
+ *
+ * @data: device state data
+ * Timings for this are not documented on the data sheet, so very
+ * conservative ones used in implementation. This implements
+ * figure 12 on the data sheet.
+ **/
+static void sht15_transmission_start(struct sht15_data *data)
+{
+ /* ensure data is high and output */
+ gpio_direction_output(data->pdata->gpio_data, 1);
+ ndelay(SHT15_TSU);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL);
+ gpio_set_value(data->pdata->gpio_sck, 1);
+ ndelay(SHT15_TSCKH);
+ gpio_set_value(data->pdata->gpio_data, 0);
+ ndelay(SHT15_TSU);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL);
+ gpio_set_value(data->pdata->gpio_sck, 1);
+ ndelay(SHT15_TSCKH);
+ gpio_set_value(data->pdata->gpio_data, 1);
+ ndelay(SHT15_TSU);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL);
+}
+/**
+ * sht15_send_byte() - send a single byte to the device
+ * @data: device state
+ * @byte: value to be sent
+ **/
+static void sht15_send_byte(struct sht15_data *data, u8 byte)
+{
+ int i;
+ for (i = 0; i < 8; i++) {
+ sht15_send_bit(data, !!(byte & 0x80));
+ byte <<= 1;
+ }
+}
+/**
+ * sht15_wait_for_response() - checks for ack from device
+ * @data: device state
+ **/
+static int sht15_wait_for_response(struct sht15_data *data)
+{
+ gpio_direction_input(data->pdata->gpio_data);
+ gpio_set_value(data->pdata->gpio_sck, 1);
+ ndelay(SHT15_TSCKH);
+ if (gpio_get_value(data->pdata->gpio_data)) {
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ dev_err(data->dev, "Command not acknowledged\n");
+ sht15_connection_reset(data);
+ return -EIO;
+ }
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL);
+ return 0;
+}
+
+/**
+ * sht15_send_cmd() - Sends a command to the device.
+ * @data: device state
+ * @cmd: command byte to be sent
+ *
+ * On entry, sck is output low, data is output pull high
+ * and the interrupt disabled.
+ **/
+static int sht15_send_cmd(struct sht15_data *data, u8 cmd)
+{
+ int ret = 0;
+ sht15_transmission_start(data);
+ sht15_send_byte(data, cmd);
+ ret = sht15_wait_for_response(data);
+ return ret;
+}
+/**
+ * sht15_update_single_val() - get a new value from device
+ * @data: device instance specific data
+ * @command: command sent to request value
+ * @timeout_msecs: timeout after which comms are assumed
+ * to have failed are reset.
+ **/
+static inline int sht15_update_single_val(struct sht15_data *data,
+ int command,
+ int timeout_msecs)
+{
+ int ret;
+ ret = sht15_send_cmd(data, command);
+ if (ret)
+ return ret;
+
+ gpio_direction_input(data->pdata->gpio_data);
+ atomic_set(&data->interrupt_handled, 0);
+
+ enable_irq(gpio_to_irq(data->pdata->gpio_data));
+ if (gpio_get_value(data->pdata->gpio_data) == 0) {
+ disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));
+ /* Only relevant if the interrupt hasn't occured. */
+ if (!atomic_read(&data->interrupt_handled))
+ schedule_work(&data->read_work);
+ }
+ ret = wait_event_timeout(data->wait_queue,
+ (data->flag == SHT15_READING_NOTHING),
+ msecs_to_jiffies(timeout_msecs));
+ if (ret == 0) {/* timeout occurred */
+ disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));;
+ sht15_connection_reset(data);
+ return -ETIME;
+ }
+ return 0;
+}
+
+/**
+ * sht15_update_vals() - get updated readings from device if too old
+ * @data: device state
+ **/
+static int sht15_update_vals(struct sht15_data *data)
+{
+ int ret = 0;
+ int timeout = HZ;
+
+ mutex_lock(&data->read_lock);
+ if (time_after(jiffies, data->last_updat + timeout)
+ || !data->valid) {
+ data->flag = SHT15_READING_HUMID;
+ ret = sht15_update_single_val(data, SHT15_MEASURE_RH, 160);
+ if (ret)
+ goto error_ret;
+ data->flag = SHT15_READING_TEMP;
+ ret = sht15_update_single_val(data, SHT15_MEASURE_TEMP, 400);
+ if (ret)
+ goto error_ret;
+ data->valid = 1;
+ data->last_updat = jiffies;
+ }
+error_ret:
+ mutex_unlock(&data->read_lock);
+
+ return ret;
+}
+
+/**
+ * sht15_calc_temp() - convert the raw reading to a temperature
+ * @data: device state
+ *
+ * As per section 4.3 of the data sheet.
+ **/
+static inline int sht15_calc_temp(struct sht15_data *data)
+{
+ int d1 = 0;
+ int i;
+
+ for (i = 1; i < ARRAY_SIZE(temppoints) - 1; i++)
+ /* Find pointer to interpolate */
+ if (data->supply_uV > temppoints[i - 1].vdd) {
+ d1 = (data->supply_uV/1000 - temppoints[i - 1].vdd)
+ * (temppoints[i].d1 - temppoints[i - 1].d1)
+ / (temppoints[i].vdd - temppoints[i - 1].vdd)
+ + temppoints[i - 1].d1;
+ break;
+ }
+
+ return data->val_temp*10 + d1;
+}
+
+/**
+ * sht15_calc_humid() - using last temperature convert raw to humid
+ * @data: device state
+ *
+ * This is the temperature compensated version as per section 4.2 of
+ * the data sheet.
+ **/
+static inline int sht15_calc_humid(struct sht15_data *data)
+{
+ int RHlinear; /* milli percent */
+ int temp = sht15_calc_temp(data);
+
+ const int c1 = -4;
+ const int c2 = 40500; /* x 10 ^ -6 */
+ const int c3 = 2800; /* x10 ^ -9 */
+
+ RHlinear = c1*1000
+ + c2 * data->val_humid/1000
+ + (data->val_humid * data->val_humid * c3)/1000000;
+ return (temp - 25000) * (10000 + 800 * data->val_humid)
+ / 1000000 + RHlinear;
+}
+
+static ssize_t sht15_show_temp(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ struct sht15_data *data = dev_get_drvdata(dev);
+
+ /* Technically no need to read humidity as well */
+ ret = sht15_update_vals(data);
+
+ return ret ? ret : sprintf(buf, "%d\n",
+ sht15_calc_temp(data));
+}
+
+static ssize_t sht15_show_humidity(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ struct sht15_data *data = dev_get_drvdata(dev);
+
+ ret = sht15_update_vals(data);
+
+ return ret ? ret : sprintf(buf, "%d\n", sht15_calc_humid(data));
+
+};
+static ssize_t show_name(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ return sprintf(buf, "%s\n", pdev->name);
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input,
+ S_IRUGO, sht15_show_temp,
+ NULL, 0);
+static SENSOR_DEVICE_ATTR(humidity1_input,
+ S_IRUGO, sht15_show_humidity,
+ NULL, 0);
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+static struct attribute *sht15_attrs[] = {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_humidity1_input.dev_attr.attr,
+ &dev_attr_name.attr,
+ NULL,
+};
+
+static const struct attribute_group sht15_attr_group = {
+ .attrs = sht15_attrs,
+};
+
+static irqreturn_t sht15_interrupt_fired(int irq, void *d)
+{
+ struct sht15_data *data = d;
+ /* First disable the interrupt */
+ disable_irq_nosync(irq);
+ atomic_inc(&data->interrupt_handled);
+ /* Then schedule a reading work struct */
+ if (data->flag != SHT15_READING_NOTHING)
+ schedule_work(&data->read_work);
+ return IRQ_HANDLED;
+}
+
+/* Each byte of data is acknowledged by pulling the data line
+ * low for one clock pulse.
+ */
+static void sht15_ack(struct sht15_data *data)
+{
+ gpio_direction_output(data->pdata->gpio_data, 0);
+ ndelay(SHT15_TSU);
+ gpio_set_value(data->pdata->gpio_sck, 1);
+ ndelay(SHT15_TSU);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSU);
+ gpio_set_value(data->pdata->gpio_data, 1);
+
+ gpio_direction_input(data->pdata->gpio_data);
+}
+/**
+ * sht15_end_transmission() - notify device of end of transmission
+ * @data: device state
+ *
+ * This is basically a NAK. (single clock pulse, data high)
+ **/
+static void sht15_end_transmission(struct sht15_data *data)
+{
+ gpio_direction_output(data->pdata->gpio_data, 1);
+ ndelay(SHT15_TSU);
+ gpio_set_value(data->pdata->gpio_sck, 1);
+ ndelay(SHT15_TSCKH);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL);
+}
+
+static void sht15_bh_read_data(struct work_struct *work_s)
+{
+ int i;
+ uint16_t val = 0;
+ struct sht15_data *data
+ = container_of(work_s, struct sht15_data,
+ read_work);
+ /* Firstly, verify the line is low */
+ if (gpio_get_value(data->pdata->gpio_data)) {
+ /* If not, then start the interrupt again - care
+ here as could have gone low in meantime so verify
+ it hasn't!
+ */
+ atomic_set(&data->interrupt_handled, 0);
+ enable_irq(gpio_to_irq(data->pdata->gpio_data));
+ /* If still not occured or another handler has been scheduled */
+ if (gpio_get_value(data->pdata->gpio_data)
+ || atomic_read(&data->interrupt_handled))
+ return;
+ }
+ /* Read the data back from the device */
+ for (i = 0; i < 16; ++i) {
+ val <<= 1;
+ gpio_set_value(data->pdata->gpio_sck, 1);
+ ndelay(SHT15_TSCKH);
+ val |= !!gpio_get_value(data->pdata->gpio_data);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL);
+ if (i == 7)
+ sht15_ack(data);
+ }
+ /* Tell the device we are done */
+ sht15_end_transmission(data);
+
+ switch (data->flag) {
+ case SHT15_READING_TEMP:
+ data->val_temp = val;
+ break;
+ case SHT15_READING_HUMID:
+ data->val_humid = val;
+ break;
+ }
+
+ data->flag = SHT15_READING_NOTHING;
+ wake_up(&data->wait_queue);
+}
+
+static void sht15_update_voltage(struct work_struct *work_s)
+{
+ struct sht15_data *data
+ = container_of(work_s, struct sht15_data,
+ update_supply_work);
+ data->supply_uV = regulator_get_voltage(data->reg);
+}
+
+/**
+ * sht15_invalidate_voltage() - mark supply voltage invalid when notified by reg
+ * @nb: associated notification structure
+ * @event: voltage regulator state change event code
+ * @ignored: function parameter - ignored here
+ *
+ * Note that as the notification code holds the regulator lock, we have
+ * to schedule an update of the supply voltage rather than getting it directly.
+ **/
+static int sht15_invalidate_voltage(struct notifier_block *nb,
+ unsigned long event,
+ void *ignored)
+{
+ struct sht15_data *data = container_of(nb, struct sht15_data, nb);
+
+ if (event == REGULATOR_EVENT_VOLTAGE_CHANGE)
+ data->supply_uV_valid = false;
+ schedule_work(&data->update_supply_work);
+
+ return NOTIFY_OK;
+}
+
+static int __devinit sht15_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct sht15_data *data = kzalloc(sizeof(*data), GFP_KERNEL);
+
+ if (!data) {
+ ret = -ENOMEM;
+ dev_err(&pdev->dev, "kzalloc failed");
+ goto error_ret;
+ }
+
+ INIT_WORK(&data->read_work, sht15_bh_read_data);
+ INIT_WORK(&data->update_supply_work, sht15_update_voltage);
+ platform_set_drvdata(pdev, data);
+ mutex_init(&data->read_lock);
+ data->dev = &pdev->dev;
+ init_waitqueue_head(&data->wait_queue);
+
+ if (pdev->dev.platform_data == NULL) {
+ dev_err(&pdev->dev, "no platform data supplied");
+ goto err_free_data;
+ }
+ data->pdata = pdev->dev.platform_data;
+ data->supply_uV = data->pdata->supply_mv*1000;
+
+/* If a regulator is available, query what the supply voltage actually is!*/
+ data->reg = regulator_get(data->dev, "vcc");
+ if (!IS_ERR(data->reg)) {
+ data->supply_uV = regulator_get_voltage(data->reg);
+ regulator_enable(data->reg);
+ /* setup a notifier block to update this if another device
+ * causes the voltage to change */
+ data->nb.notifier_call = &sht15_invalidate_voltage;
+ ret = regulator_register_notifier(data->reg, &data->nb);
+ }
+/* Try requesting the GPIOs */
+ ret = gpio_request(data->pdata->gpio_sck, "SHT15 sck");
+ if (ret) {
+ dev_err(&pdev->dev, "gpio request failed");
+ goto err_free_data;
+ }
+ gpio_direction_output(data->pdata->gpio_sck, 0);
+ ret = gpio_request(data->pdata->gpio_data, "SHT15 data");
+ if (ret) {
+ dev_err(&pdev->dev, "gpio request failed");
+ goto err_release_gpio_sck;
+ }
+ ret = sysfs_create_group(&pdev->dev.kobj, &sht15_attr_group);
+ if (ret) {
+ dev_err(&pdev->dev, "sysfs create failed");
+ goto err_free_data;
+ }
+
+ ret = request_irq(gpio_to_irq(data->pdata->gpio_data),
+ sht15_interrupt_fired,
+ IRQF_TRIGGER_FALLING,
+ "sht15 data",
+ data);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get irq for data line");
+ goto err_release_gpio_data;
+ }
+ disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));
+ sht15_connection_reset(data);
+ sht15_send_cmd(data, 0x1E);
+
+ data->hwmon_dev = hwmon_device_register(data->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ ret = PTR_ERR(data->hwmon_dev);
+ goto err_release_gpio_data;
+ }
+ return 0;
+
+err_release_gpio_data:
+ gpio_free(data->pdata->gpio_data);
+err_release_gpio_sck:
+ gpio_free(data->pdata->gpio_sck);
+err_free_data:
+ kfree(data);
+error_ret:
+
+ return ret;
+}
+
+static int __devexit sht15_remove(struct platform_device *pdev)
+{
+ struct sht15_data *data = platform_get_drvdata(pdev);
+
+ /* Make sure any reads from the device are done and
+ * prevent new ones beginnning */
+ mutex_lock(&data->read_lock);
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&pdev->dev.kobj, &sht15_attr_group);
+ if (!IS_ERR(data->reg)) {
+ regulator_unregister_notifier(data->reg, &data->nb);
+ regulator_disable(data->reg);
+ regulator_put(data->reg);
+ }
+
+ free_irq(gpio_to_irq(data->pdata->gpio_data), data);
+ gpio_free(data->pdata->gpio_data);
+ gpio_free(data->pdata->gpio_sck);
+ mutex_unlock(&data->read_lock);
+ kfree(data);
+ return 0;
+}
+
+
+static struct platform_driver sht_drivers[] = {
+ {
+ .driver = {
+ .name = "sht10",
+ .owner = THIS_MODULE,
+ },
+ .probe = sht15_probe,
+ .remove = sht15_remove,
+ }, {
+ .driver = {
+ .name = "sht11",
+ .owner = THIS_MODULE,
+ },
+ .probe = sht15_probe,
+ .remove = sht15_remove,
+ }, {
+ .driver = {
+ .name = "sht15",
+ .owner = THIS_MODULE,
+ },
+ .probe = sht15_probe,
+ .remove = sht15_remove,
+ }, {
+ .driver = {
+ .name = "sht71",
+ .owner = THIS_MODULE,
+ },
+ .probe = sht15_probe,
+ .remove = sht15_remove,
+ }, {
+ .driver = {
+ .name = "sht75",
+ .owner = THIS_MODULE,
+ },
+ .probe = sht15_probe,
+ .remove = sht15_remove,
+ },
+};
+
+
+static int __init sht15_init(void)
+{
+ int ret;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(sht_drivers); i++) {
+ ret = platform_driver_register(&sht_drivers[i]);
+ if (ret)
+ goto error_unreg;
+ }
+
+ return 0;
+
+error_unreg:
+ while (--i >= 0)
+ platform_driver_unregister(&sht_drivers[i]);
+
+ return ret;
+}
+module_init(sht15_init);
+
+static void __exit sht15_exit(void)
+{
+ int i;
+ for (i = ARRAY_SIZE(sht_drivers) - 1; i >= 0; i--)
+ platform_driver_unregister(&sht_drivers[i]);
+}
+module_exit(sht15_exit);
+
+MODULE_LICENSE("GPL");
* We only use page mode writes; the alternative is sloooow. This routine
* writes at most one page.
*/
-static ssize_t at24_eeprom_write(struct at24_data *at24, char *buf,
+static ssize_t at24_eeprom_write(struct at24_data *at24, const char *buf,
unsigned offset, size_t count)
{
struct i2c_client *client;
return -ETIMEDOUT;
}
-static ssize_t at24_write(struct at24_data *at24,
- char *buf, loff_t off, size_t count)
+static ssize_t at24_write(struct at24_data *at24, const char *buf, loff_t off,
+ size_t count)
{
ssize_t retval = 0;
return at24_read(at24, buf, offset, count);
}
-static ssize_t at24_macc_write(struct memory_accessor *macc, char *buf,
+static ssize_t at24_macc_write(struct memory_accessor *macc, const char *buf,
off_t offset, size_t count)
{
struct at24_data *at24 = container_of(macc, struct at24_data, macc);
static ssize_t
-at25_ee_write(struct at25_data *at25, char *buf, loff_t off, size_t count)
+at25_ee_write(struct at25_data *at25, const char *buf, loff_t off,
+ size_t count)
{
ssize_t status = 0;
unsigned written = 0;
return at25_ee_read(at25, buf, offset, count);
}
-static ssize_t at25_mem_write(struct memory_accessor *mem, char *buf,
+static ssize_t at25_mem_write(struct memory_accessor *mem, const char *buf,
off_t offset, size_t count)
{
struct at25_data *at25 = container_of(mem, struct at25_data, mem);
short max_npartitions; /* value of XPC_MAX_PARTITIONS */
u8 version;
u8 pad1[3]; /* align to next u64 in 1st 64-byte cacheline */
+ unsigned long ts_jiffies; /* timestamp when rsvd pg was setup by XPC */
union {
- unsigned long vars_pa; /* phys address of struct xpc_vars */
- unsigned long activate_gru_mq_desc_gpa; /* phys addr of */
- /* activate mq's */
- /* gru mq descriptor */
+ struct {
+ unsigned long vars_pa; /* phys addr */
+ } sn2;
+ struct {
+ unsigned long heartbeat_gpa; /* phys addr */
+ unsigned long activate_gru_mq_desc_gpa; /* phys addr */
+ } uv;
} sn;
- unsigned long ts_jiffies; /* timestamp when rsvd pg was setup by XPC */
- u64 pad2[10]; /* align to last u64 in 2nd 64-byte cacheline */
+ u64 pad2[9]; /* align to last u64 in 2nd 64-byte cacheline */
u64 SAL_nasids_size; /* SAL: size of each nasid mask in bytes */
};
-#define XPC_RP_VERSION _XPC_VERSION(2, 0) /* version 2.0 of the reserved page */
+#define XPC_RP_VERSION _XPC_VERSION(3, 0) /* version 3.0 of the reserved page */
/*
* Define the structures by which XPC variables can be exported to other
(XPC_RP_MACH_NASIDS(_rp) + \
xpc_nasid_mask_nlongs))
+
+/*
+ * The following structure describes the partition's heartbeat info which
+ * will be periodically read by other partitions to determine whether this
+ * XPC is still 'alive'.
+ */
+struct xpc_heartbeat_uv {
+ unsigned long value;
+ unsigned long offline; /* if 0, heartbeat should be changing */
+};
+
/*
* Info pertinent to a GRU message queue using a watch list for irq generation.
*/
/*
* The activate_mq is used to send/receive GRU messages that affect XPC's
- * heartbeat, partition active state, and channel state. This is UV only.
+ * partition active state and channel state. This is uv only.
*/
struct xpc_activate_mq_msghdr_uv {
unsigned int gru_msg_hdr; /* FOR GRU INTERNAL USE ONLY */
/* activate_mq defined message types */
#define XPC_ACTIVATE_MQ_MSG_SYNC_ACT_STATE_UV 0
-#define XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV 1
-#define XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV 2
-#define XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV 3
-#define XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV 4
-#define XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV 5
+#define XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV 1
+#define XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV 2
-#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV 6
-#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV 7
-#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV 8
-#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV 9
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV 3
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV 4
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV 5
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV 6
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENCOMPLETE_UV 7
-#define XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV 10
-#define XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV 11
+#define XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV 8
+#define XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV 9
struct xpc_activate_mq_msg_uv {
struct xpc_activate_mq_msghdr_uv hdr;
};
-struct xpc_activate_mq_msg_heartbeat_req_uv {
- struct xpc_activate_mq_msghdr_uv hdr;
- u64 heartbeat;
-};
-
struct xpc_activate_mq_msg_activate_req_uv {
struct xpc_activate_mq_msghdr_uv hdr;
unsigned long rp_gpa;
+ unsigned long heartbeat_gpa;
unsigned long activate_gru_mq_desc_gpa;
};
unsigned long notify_gru_mq_desc_gpa;
};
+struct xpc_activate_mq_msg_chctl_opencomplete_uv {
+ struct xpc_activate_mq_msghdr_uv hdr;
+ short ch_number;
+};
+
/*
* Functions registered by add_timer() or called by kernel_thread() only
* allow for a single 64-bit argument. The following macros can be used to
#define XPC_C_WASCONNECTED 0x00000001 /* channel was connected */
-#define XPC_C_ROPENREPLY 0x00000002 /* remote open channel reply */
-#define XPC_C_OPENREPLY 0x00000004 /* local open channel reply */
-#define XPC_C_ROPENREQUEST 0x00000008 /* remote open channel request */
-#define XPC_C_OPENREQUEST 0x00000010 /* local open channel request */
+#define XPC_C_ROPENCOMPLETE 0x00000002 /* remote open channel complete */
+#define XPC_C_OPENCOMPLETE 0x00000004 /* local open channel complete */
+#define XPC_C_ROPENREPLY 0x00000008 /* remote open channel reply */
+#define XPC_C_OPENREPLY 0x00000010 /* local open channel reply */
+#define XPC_C_ROPENREQUEST 0x00000020 /* remote open channel request */
+#define XPC_C_OPENREQUEST 0x00000040 /* local open channel request */
-#define XPC_C_SETUP 0x00000020 /* channel's msgqueues are alloc'd */
-#define XPC_C_CONNECTEDCALLOUT 0x00000040 /* connected callout initiated */
+#define XPC_C_SETUP 0x00000080 /* channel's msgqueues are alloc'd */
+#define XPC_C_CONNECTEDCALLOUT 0x00000100 /* connected callout initiated */
#define XPC_C_CONNECTEDCALLOUT_MADE \
- 0x00000080 /* connected callout completed */
-#define XPC_C_CONNECTED 0x00000100 /* local channel is connected */
-#define XPC_C_CONNECTING 0x00000200 /* channel is being connected */
+ 0x00000200 /* connected callout completed */
+#define XPC_C_CONNECTED 0x00000400 /* local channel is connected */
+#define XPC_C_CONNECTING 0x00000800 /* channel is being connected */
-#define XPC_C_RCLOSEREPLY 0x00000400 /* remote close channel reply */
-#define XPC_C_CLOSEREPLY 0x00000800 /* local close channel reply */
-#define XPC_C_RCLOSEREQUEST 0x00001000 /* remote close channel request */
-#define XPC_C_CLOSEREQUEST 0x00002000 /* local close channel request */
+#define XPC_C_RCLOSEREPLY 0x00001000 /* remote close channel reply */
+#define XPC_C_CLOSEREPLY 0x00002000 /* local close channel reply */
+#define XPC_C_RCLOSEREQUEST 0x00004000 /* remote close channel request */
+#define XPC_C_CLOSEREQUEST 0x00008000 /* local close channel request */
-#define XPC_C_DISCONNECTED 0x00004000 /* channel is disconnected */
-#define XPC_C_DISCONNECTING 0x00008000 /* channel is being disconnected */
+#define XPC_C_DISCONNECTED 0x00010000 /* channel is disconnected */
+#define XPC_C_DISCONNECTING 0x00020000 /* channel is being disconnected */
#define XPC_C_DISCONNECTINGCALLOUT \
- 0x00010000 /* disconnecting callout initiated */
+ 0x00040000 /* disconnecting callout initiated */
#define XPC_C_DISCONNECTINGCALLOUT_MADE \
- 0x00020000 /* disconnecting callout completed */
-#define XPC_C_WDISCONNECT 0x00040000 /* waiting for channel disconnect */
+ 0x00080000 /* disconnecting callout completed */
+#define XPC_C_WDISCONNECT 0x00100000 /* waiting for channel disconnect */
/*
* The channel control flags (chctl) union consists of a 64-bit variable which
#define XPC_CHCTL_CLOSEREPLY 0x02
#define XPC_CHCTL_OPENREQUEST 0x04
#define XPC_CHCTL_OPENREPLY 0x08
-#define XPC_CHCTL_MSGREQUEST 0x10
+#define XPC_CHCTL_OPENCOMPLETE 0x10
+#define XPC_CHCTL_MSGREQUEST 0x20
#define XPC_OPENCLOSE_CHCTL_FLAGS \
(XPC_CHCTL_CLOSEREQUEST | XPC_CHCTL_CLOSEREPLY | \
- XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY)
+ XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY | \
+ XPC_CHCTL_OPENCOMPLETE)
#define XPC_MSG_CHCTL_FLAGS XPC_CHCTL_MSGREQUEST
static inline int
};
struct xpc_partition_uv {
+ unsigned long heartbeat_gpa; /* phys addr of partition's heartbeat */
+ struct xpc_heartbeat_uv cached_heartbeat; /* cached copy of */
+ /* partition's heartbeat */
unsigned long activate_gru_mq_desc_gpa; /* phys addr of parititon's */
/* activate mq's gru mq */
/* descriptor */
u8 remote_act_state; /* remote partition's act_state */
u8 act_state_req; /* act_state request from remote partition */
enum xp_retval reason; /* reason for deactivate act_state request */
- u64 heartbeat; /* incremented by remote partition */
};
/* struct xpc_partition_uv flags */
-#define XPC_P_HEARTBEAT_OFFLINE_UV 0x00000001
+#define XPC_P_CACHED_ACTIVATE_GRU_MQ_DESC_UV 0x00000001
#define XPC_P_ENGAGED_UV 0x00000002
-#define XPC_P_CACHED_ACTIVATE_GRU_MQ_DESC_UV 0x00000004
/* struct xpc_partition_uv act_state change requests */
} ____cacheline_aligned;
+struct xpc_arch_operations {
+ int (*setup_partitions) (void);
+ void (*teardown_partitions) (void);
+ void (*process_activate_IRQ_rcvd) (void);
+ enum xp_retval (*get_partition_rsvd_page_pa)
+ (void *, u64 *, unsigned long *, size_t *);
+ int (*setup_rsvd_page) (struct xpc_rsvd_page *);
+
+ void (*allow_hb) (short);
+ void (*disallow_hb) (short);
+ void (*disallow_all_hbs) (void);
+ void (*increment_heartbeat) (void);
+ void (*offline_heartbeat) (void);
+ void (*online_heartbeat) (void);
+ void (*heartbeat_init) (void);
+ void (*heartbeat_exit) (void);
+ enum xp_retval (*get_remote_heartbeat) (struct xpc_partition *);
+
+ void (*request_partition_activation) (struct xpc_rsvd_page *,
+ unsigned long, int);
+ void (*request_partition_reactivation) (struct xpc_partition *);
+ void (*request_partition_deactivation) (struct xpc_partition *);
+ void (*cancel_partition_deactivation_request) (struct xpc_partition *);
+ enum xp_retval (*setup_ch_structures) (struct xpc_partition *);
+ void (*teardown_ch_structures) (struct xpc_partition *);
+
+ enum xp_retval (*make_first_contact) (struct xpc_partition *);
+
+ u64 (*get_chctl_all_flags) (struct xpc_partition *);
+ void (*send_chctl_closerequest) (struct xpc_channel *, unsigned long *);
+ void (*send_chctl_closereply) (struct xpc_channel *, unsigned long *);
+ void (*send_chctl_openrequest) (struct xpc_channel *, unsigned long *);
+ void (*send_chctl_openreply) (struct xpc_channel *, unsigned long *);
+ void (*send_chctl_opencomplete) (struct xpc_channel *, unsigned long *);
+ void (*process_msg_chctl_flags) (struct xpc_partition *, int);
+
+ enum xp_retval (*save_remote_msgqueue_pa) (struct xpc_channel *,
+ unsigned long);
+
+ enum xp_retval (*setup_msg_structures) (struct xpc_channel *);
+ void (*teardown_msg_structures) (struct xpc_channel *);
+
+ void (*indicate_partition_engaged) (struct xpc_partition *);
+ void (*indicate_partition_disengaged) (struct xpc_partition *);
+ void (*assume_partition_disengaged) (short);
+ int (*partition_engaged) (short);
+ int (*any_partition_engaged) (void);
+
+ int (*n_of_deliverable_payloads) (struct xpc_channel *);
+ enum xp_retval (*send_payload) (struct xpc_channel *, u32, void *,
+ u16, u8, xpc_notify_func, void *);
+ void *(*get_deliverable_payload) (struct xpc_channel *);
+ void (*received_payload) (struct xpc_channel *, void *);
+ void (*notify_senders_of_disconnect) (struct xpc_channel *);
+};
+
/* struct xpc_partition act_state values (for XPC HB) */
#define XPC_P_AS_INACTIVE 0x00 /* partition is not active */
/* found in xpc_main.c */
extern struct device *xpc_part;
extern struct device *xpc_chan;
+extern struct xpc_arch_operations xpc_arch_ops;
extern int xpc_disengage_timelimit;
extern int xpc_disengage_timedout;
extern int xpc_activate_IRQ_rcvd;
extern spinlock_t xpc_activate_IRQ_rcvd_lock;
extern wait_queue_head_t xpc_activate_IRQ_wq;
-extern void *xpc_heartbeating_to_mask;
extern void *xpc_kzalloc_cacheline_aligned(size_t, gfp_t, void **);
extern void xpc_activate_partition(struct xpc_partition *);
extern void xpc_activate_kthreads(struct xpc_channel *, int);
extern void xpc_create_kthreads(struct xpc_channel *, int, int);
extern void xpc_disconnect_wait(int);
-extern int (*xpc_setup_partitions_sn) (void);
-extern void (*xpc_teardown_partitions_sn) (void);
-extern enum xp_retval (*xpc_get_partition_rsvd_page_pa) (void *, u64 *,
- unsigned long *,
- size_t *);
-extern int (*xpc_setup_rsvd_page_sn) (struct xpc_rsvd_page *);
-extern void (*xpc_heartbeat_init) (void);
-extern void (*xpc_heartbeat_exit) (void);
-extern void (*xpc_increment_heartbeat) (void);
-extern void (*xpc_offline_heartbeat) (void);
-extern void (*xpc_online_heartbeat) (void);
-extern enum xp_retval (*xpc_get_remote_heartbeat) (struct xpc_partition *);
-extern enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *);
-extern u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *);
-extern enum xp_retval (*xpc_setup_msg_structures) (struct xpc_channel *);
-extern void (*xpc_teardown_msg_structures) (struct xpc_channel *);
-extern void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *);
-extern void (*xpc_process_msg_chctl_flags) (struct xpc_partition *, int);
-extern int (*xpc_n_of_deliverable_payloads) (struct xpc_channel *);
-extern void *(*xpc_get_deliverable_payload) (struct xpc_channel *);
-extern void (*xpc_request_partition_activation) (struct xpc_rsvd_page *,
- unsigned long, int);
-extern void (*xpc_request_partition_reactivation) (struct xpc_partition *);
-extern void (*xpc_request_partition_deactivation) (struct xpc_partition *);
-extern void (*xpc_cancel_partition_deactivation_request) (
- struct xpc_partition *);
-extern void (*xpc_process_activate_IRQ_rcvd) (void);
-extern enum xp_retval (*xpc_setup_ch_structures_sn) (struct xpc_partition *);
-extern void (*xpc_teardown_ch_structures_sn) (struct xpc_partition *);
-
-extern void (*xpc_indicate_partition_engaged) (struct xpc_partition *);
-extern int (*xpc_partition_engaged) (short);
-extern int (*xpc_any_partition_engaged) (void);
-extern void (*xpc_indicate_partition_disengaged) (struct xpc_partition *);
-extern void (*xpc_assume_partition_disengaged) (short);
-
-extern void (*xpc_send_chctl_closerequest) (struct xpc_channel *,
- unsigned long *);
-extern void (*xpc_send_chctl_closereply) (struct xpc_channel *,
- unsigned long *);
-extern void (*xpc_send_chctl_openrequest) (struct xpc_channel *,
- unsigned long *);
-extern void (*xpc_send_chctl_openreply) (struct xpc_channel *, unsigned long *);
-
-extern enum xp_retval (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *,
- unsigned long);
-
-extern enum xp_retval (*xpc_send_payload) (struct xpc_channel *, u32, void *,
- u16, u8, xpc_notify_func, void *);
-extern void (*xpc_received_payload) (struct xpc_channel *, void *);
/* found in xpc_sn2.c */
extern int xpc_init_sn2(void);
extern void xpc_disconnect_callout(struct xpc_channel *, enum xp_retval);
extern void xpc_partition_going_down(struct xpc_partition *, enum xp_retval);
-static inline int
-xpc_hb_allowed(short partid, void *heartbeating_to_mask)
-{
- return test_bit(partid, heartbeating_to_mask);
-}
-
-static inline int
-xpc_any_hbs_allowed(void)
-{
- DBUG_ON(xpc_heartbeating_to_mask == NULL);
- return !bitmap_empty(xpc_heartbeating_to_mask, xp_max_npartitions);
-}
-
-static inline void
-xpc_allow_hb(short partid)
-{
- DBUG_ON(xpc_heartbeating_to_mask == NULL);
- set_bit(partid, xpc_heartbeating_to_mask);
-}
-
-static inline void
-xpc_disallow_hb(short partid)
-{
- DBUG_ON(xpc_heartbeating_to_mask == NULL);
- clear_bit(partid, xpc_heartbeating_to_mask);
-}
-
-static inline void
-xpc_disallow_all_hbs(void)
-{
- DBUG_ON(xpc_heartbeating_to_mask == NULL);
- bitmap_zero(xpc_heartbeating_to_mask, xp_max_npartitions);
-}
-
static inline void
xpc_wakeup_channel_mgr(struct xpc_partition *part)
{
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2004-2008 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2004-2009 Silicon Graphics, Inc. All Rights Reserved.
*/
/*
if (!(ch->flags & XPC_C_SETUP)) {
spin_unlock_irqrestore(&ch->lock, *irq_flags);
- ret = xpc_setup_msg_structures(ch);
+ ret = xpc_arch_ops.setup_msg_structures(ch);
spin_lock_irqsave(&ch->lock, *irq_flags);
if (ret != xpSuccess)
XPC_DISCONNECT_CHANNEL(ch, ret, irq_flags);
+ else
+ ch->flags |= XPC_C_SETUP;
- ch->flags |= XPC_C_SETUP;
-
- if (ch->flags & (XPC_C_CONNECTED | XPC_C_DISCONNECTING))
+ if (ch->flags & XPC_C_DISCONNECTING)
return;
}
if (!(ch->flags & XPC_C_OPENREPLY)) {
ch->flags |= XPC_C_OPENREPLY;
- xpc_send_chctl_openreply(ch, irq_flags);
+ xpc_arch_ops.send_chctl_openreply(ch, irq_flags);
}
if (!(ch->flags & XPC_C_ROPENREPLY))
return;
- ch->flags = (XPC_C_CONNECTED | XPC_C_SETUP); /* clear all else */
+ if (!(ch->flags & XPC_C_OPENCOMPLETE)) {
+ ch->flags |= (XPC_C_OPENCOMPLETE | XPC_C_CONNECTED);
+ xpc_arch_ops.send_chctl_opencomplete(ch, irq_flags);
+ }
+
+ if (!(ch->flags & XPC_C_ROPENCOMPLETE))
+ return;
dev_info(xpc_chan, "channel %d to partition %d connected\n",
ch->number, ch->partid);
- spin_unlock_irqrestore(&ch->lock, *irq_flags);
- xpc_create_kthreads(ch, 1, 0);
- spin_lock_irqsave(&ch->lock, *irq_flags);
+ ch->flags = (XPC_C_CONNECTED | XPC_C_SETUP); /* clear all else */
}
/*
if (part->act_state == XPC_P_AS_DEACTIVATING) {
/* can't proceed until the other side disengages from us */
- if (xpc_partition_engaged(ch->partid))
+ if (xpc_arch_ops.partition_engaged(ch->partid))
return;
} else {
if (!(ch->flags & XPC_C_CLOSEREPLY)) {
ch->flags |= XPC_C_CLOSEREPLY;
- xpc_send_chctl_closereply(ch, irq_flags);
+ xpc_arch_ops.send_chctl_closereply(ch, irq_flags);
}
if (!(ch->flags & XPC_C_RCLOSEREPLY))
/* wake those waiting for notify completion */
if (atomic_read(&ch->n_to_notify) > 0) {
/* we do callout while holding ch->lock, callout can't block */
- xpc_notify_senders_of_disconnect(ch);
+ xpc_arch_ops.notify_senders_of_disconnect(ch);
}
/* both sides are disconnected now */
DBUG_ON(atomic_read(&ch->n_to_notify) != 0);
/* it's now safe to free the channel's message queues */
- xpc_teardown_msg_structures(ch);
+ xpc_arch_ops.teardown_msg_structures(ch);
ch->func = NULL;
ch->key = NULL;
/*
* Mark the channel disconnected and clear all other flags, including
- * XPC_C_SETUP (because of call to xpc_teardown_msg_structures()) but
- * not including XPC_C_WDISCONNECT (if it was set).
+ * XPC_C_SETUP (because of call to
+ * xpc_arch_ops.teardown_msg_structures()) but not including
+ * XPC_C_WDISCONNECT (if it was set).
*/
ch->flags = (XPC_C_DISCONNECTED | (ch->flags & XPC_C_WDISCONNECT));
struct xpc_channel *ch = &part->channels[ch_number];
enum xp_retval reason;
enum xp_retval ret;
+ int create_kthread = 0;
spin_lock_irqsave(&ch->lock, irq_flags);
* has had a chance to see that the channel is disconnected.
*/
ch->delayed_chctl_flags |= chctl_flags;
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
if (chctl_flags & XPC_CHCTL_CLOSEREQUEST) {
XPC_CHCTL_CLOSEREQUEST;
spin_unlock(&part->chctl_lock);
}
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
XPC_SET_REASON(ch, 0, 0);
ch->flags |= (XPC_C_CONNECTING | XPC_C_ROPENREQUEST);
}
- chctl_flags &= ~(XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY);
+ chctl_flags &= ~(XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY |
+ XPC_CHCTL_OPENCOMPLETE);
/*
* The meaningful CLOSEREQUEST connection state fields are:
XPC_DISCONNECT_CHANNEL(ch, reason, &irq_flags);
DBUG_ON(chctl_flags & XPC_CHCTL_CLOSEREPLY);
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
xpc_process_disconnect(ch, &irq_flags);
if (ch->flags & XPC_C_DISCONNECTED) {
DBUG_ON(part->act_state != XPC_P_AS_DEACTIVATING);
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
DBUG_ON(!(ch->flags & XPC_C_CLOSEREQUEST));
XPC_CHCTL_CLOSEREPLY;
spin_unlock(&part->chctl_lock);
}
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
ch->flags |= XPC_C_RCLOSEREPLY;
if (part->act_state == XPC_P_AS_DEACTIVATING ||
(ch->flags & XPC_C_ROPENREQUEST)) {
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_WDISCONNECT)) {
ch->delayed_chctl_flags |= XPC_CHCTL_OPENREQUEST;
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
DBUG_ON(!(ch->flags & (XPC_C_DISCONNECTED |
XPC_C_OPENREQUEST)));
*/
if (args->entry_size == 0 || args->local_nentries == 0) {
/* assume OPENREQUEST was delayed by mistake */
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
ch->flags |= (XPC_C_ROPENREQUEST | XPC_C_CONNECTING);
if (args->entry_size != ch->entry_size) {
XPC_DISCONNECT_CHANNEL(ch, xpUnequalMsgSizes,
&irq_flags);
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
} else {
ch->entry_size = args->entry_size;
args->local_msgqueue_pa, args->local_nentries,
args->remote_nentries, ch->partid, ch->number);
- if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_DISCONNECTED)) {
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
- }
+ if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_DISCONNECTED))
+ goto out;
+
if (!(ch->flags & XPC_C_OPENREQUEST)) {
XPC_DISCONNECT_CHANNEL(ch, xpOpenCloseError,
&irq_flags);
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
DBUG_ON(!(ch->flags & XPC_C_ROPENREQUEST));
DBUG_ON(args->local_nentries == 0);
DBUG_ON(args->remote_nentries == 0);
- ret = xpc_save_remote_msgqueue_pa(ch, args->local_msgqueue_pa);
+ ret = xpc_arch_ops.save_remote_msgqueue_pa(ch,
+ args->local_msgqueue_pa);
if (ret != xpSuccess) {
XPC_DISCONNECT_CHANNEL(ch, ret, &irq_flags);
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
ch->flags |= XPC_C_ROPENREPLY;
xpc_process_connect(ch, &irq_flags);
}
+ if (chctl_flags & XPC_CHCTL_OPENCOMPLETE) {
+
+ dev_dbg(xpc_chan, "XPC_CHCTL_OPENCOMPLETE received from "
+ "partid=%d, channel=%d\n", ch->partid, ch->number);
+
+ if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_DISCONNECTED))
+ goto out;
+
+ if (!(ch->flags & XPC_C_OPENREQUEST) ||
+ !(ch->flags & XPC_C_OPENREPLY)) {
+ XPC_DISCONNECT_CHANNEL(ch, xpOpenCloseError,
+ &irq_flags);
+ goto out;
+ }
+
+ DBUG_ON(!(ch->flags & XPC_C_ROPENREQUEST));
+ DBUG_ON(!(ch->flags & XPC_C_ROPENREPLY));
+ DBUG_ON(!(ch->flags & XPC_C_CONNECTED));
+
+ ch->flags |= XPC_C_ROPENCOMPLETE;
+
+ xpc_process_connect(ch, &irq_flags);
+ create_kthread = 1;
+ }
+
+out:
spin_unlock_irqrestore(&ch->lock, irq_flags);
+
+ if (create_kthread)
+ xpc_create_kthreads(ch, 1, 0);
}
/*
/* initiate the connection */
ch->flags |= (XPC_C_OPENREQUEST | XPC_C_CONNECTING);
- xpc_send_chctl_openrequest(ch, &irq_flags);
+ xpc_arch_ops.send_chctl_openrequest(ch, &irq_flags);
xpc_process_connect(ch, &irq_flags);
int ch_number;
u32 ch_flags;
- chctl.all_flags = xpc_get_chctl_all_flags(part);
+ chctl.all_flags = xpc_arch_ops.get_chctl_all_flags(part);
/*
* Initiate channel connections for registered channels.
if (!(ch_flags & XPC_C_OPENREQUEST)) {
DBUG_ON(ch_flags & XPC_C_SETUP);
(void)xpc_connect_channel(ch);
- } else {
- spin_lock_irqsave(&ch->lock, irq_flags);
- xpc_process_connect(ch, &irq_flags);
- spin_unlock_irqrestore(&ch->lock, irq_flags);
}
continue;
}
*/
if (chctl.flags[ch_number] & XPC_MSG_CHCTL_FLAGS)
- xpc_process_msg_chctl_flags(part, ch_number);
+ xpc_arch_ops.process_msg_chctl_flags(part, ch_number);
}
}
XPC_C_ROPENREQUEST | XPC_C_ROPENREPLY |
XPC_C_CONNECTING | XPC_C_CONNECTED);
- xpc_send_chctl_closerequest(ch, irq_flags);
+ xpc_arch_ops.send_chctl_closerequest(ch, irq_flags);
if (channel_was_connected)
ch->flags |= XPC_C_WASCONNECTED;
DBUG_ON(payload == NULL);
if (xpc_part_ref(part)) {
- ret = xpc_send_payload(&part->channels[ch_number], flags,
- payload, payload_size, 0, NULL, NULL);
+ ret = xpc_arch_ops.send_payload(&part->channels[ch_number],
+ flags, payload, payload_size, 0, NULL, NULL);
xpc_part_deref(part);
}
DBUG_ON(func == NULL);
if (xpc_part_ref(part)) {
- ret = xpc_send_payload(&part->channels[ch_number], flags,
- payload, payload_size, XPC_N_CALL, func,
- key);
+ ret = xpc_arch_ops.send_payload(&part->channels[ch_number],
+ flags, payload, payload_size, XPC_N_CALL, func, key);
xpc_part_deref(part);
}
return ret;
{
void *payload;
- payload = xpc_get_deliverable_payload(ch);
+ payload = xpc_arch_ops.get_deliverable_payload(ch);
if (payload != NULL) {
/*
DBUG_ON(ch_number < 0 || ch_number >= part->nchannels);
ch = &part->channels[ch_number];
- xpc_received_payload(ch, payload);
+ xpc_arch_ops.received_payload(ch, payload);
/* the call to xpc_msgqueue_ref() was done by xpc_deliver_payload() */
xpc_msgqueue_deref(ch);
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2004-2008 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2004-2009 Silicon Graphics, Inc. All Rights Reserved.
*/
/*
static unsigned long xpc_hb_check_timeout;
static struct timer_list xpc_hb_timer;
-void *xpc_heartbeating_to_mask;
/* notification that the xpc_hb_checker thread has exited */
static DECLARE_COMPLETION(xpc_hb_checker_exited);
.notifier_call = xpc_system_die,
};
-int (*xpc_setup_partitions_sn) (void);
-void (*xpc_teardown_partitions_sn) (void);
-enum xp_retval (*xpc_get_partition_rsvd_page_pa) (void *buf, u64 *cookie,
- unsigned long *rp_pa,
- size_t *len);
-int (*xpc_setup_rsvd_page_sn) (struct xpc_rsvd_page *rp);
-void (*xpc_heartbeat_init) (void);
-void (*xpc_heartbeat_exit) (void);
-void (*xpc_increment_heartbeat) (void);
-void (*xpc_offline_heartbeat) (void);
-void (*xpc_online_heartbeat) (void);
-enum xp_retval (*xpc_get_remote_heartbeat) (struct xpc_partition *part);
-
-enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *part);
-void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *ch);
-u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *part);
-enum xp_retval (*xpc_setup_msg_structures) (struct xpc_channel *ch);
-void (*xpc_teardown_msg_structures) (struct xpc_channel *ch);
-void (*xpc_process_msg_chctl_flags) (struct xpc_partition *part, int ch_number);
-int (*xpc_n_of_deliverable_payloads) (struct xpc_channel *ch);
-void *(*xpc_get_deliverable_payload) (struct xpc_channel *ch);
-
-void (*xpc_request_partition_activation) (struct xpc_rsvd_page *remote_rp,
- unsigned long remote_rp_pa,
- int nasid);
-void (*xpc_request_partition_reactivation) (struct xpc_partition *part);
-void (*xpc_request_partition_deactivation) (struct xpc_partition *part);
-void (*xpc_cancel_partition_deactivation_request) (struct xpc_partition *part);
-
-void (*xpc_process_activate_IRQ_rcvd) (void);
-enum xp_retval (*xpc_setup_ch_structures_sn) (struct xpc_partition *part);
-void (*xpc_teardown_ch_structures_sn) (struct xpc_partition *part);
-
-void (*xpc_indicate_partition_engaged) (struct xpc_partition *part);
-int (*xpc_partition_engaged) (short partid);
-int (*xpc_any_partition_engaged) (void);
-void (*xpc_indicate_partition_disengaged) (struct xpc_partition *part);
-void (*xpc_assume_partition_disengaged) (short partid);
-
-void (*xpc_send_chctl_closerequest) (struct xpc_channel *ch,
- unsigned long *irq_flags);
-void (*xpc_send_chctl_closereply) (struct xpc_channel *ch,
- unsigned long *irq_flags);
-void (*xpc_send_chctl_openrequest) (struct xpc_channel *ch,
- unsigned long *irq_flags);
-void (*xpc_send_chctl_openreply) (struct xpc_channel *ch,
- unsigned long *irq_flags);
-
-enum xp_retval (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *ch,
- unsigned long msgqueue_pa);
-
-enum xp_retval (*xpc_send_payload) (struct xpc_channel *ch, u32 flags,
- void *payload, u16 payload_size,
- u8 notify_type, xpc_notify_func func,
- void *key);
-void (*xpc_received_payload) (struct xpc_channel *ch, void *payload);
+struct xpc_arch_operations xpc_arch_ops;
/*
* Timer function to enforce the timelimit on the partition disengage.
(void)xpc_partition_disengaged(part);
DBUG_ON(part->disengage_timeout != 0);
- DBUG_ON(xpc_partition_engaged(XPC_PARTID(part)));
+ DBUG_ON(xpc_arch_ops.partition_engaged(XPC_PARTID(part)));
}
/*
static void
xpc_hb_beater(unsigned long dummy)
{
- xpc_increment_heartbeat();
+ xpc_arch_ops.increment_heartbeat();
if (time_is_before_eq_jiffies(xpc_hb_check_timeout))
wake_up_interruptible(&xpc_activate_IRQ_wq);
static void
xpc_start_hb_beater(void)
{
- xpc_heartbeat_init();
+ xpc_arch_ops.heartbeat_init();
init_timer(&xpc_hb_timer);
xpc_hb_timer.function = xpc_hb_beater;
xpc_hb_beater(0);
xpc_stop_hb_beater(void)
{
del_timer_sync(&xpc_hb_timer);
- xpc_heartbeat_exit();
+ xpc_arch_ops.heartbeat_exit();
}
/*
continue;
}
- ret = xpc_get_remote_heartbeat(part);
+ ret = xpc_arch_ops.get_remote_heartbeat(part);
if (ret != xpSuccess)
XPC_DEACTIVATE_PARTITION(part, ret);
}
force_IRQ = 0;
dev_dbg(xpc_part, "processing activate IRQs "
"received\n");
- xpc_process_activate_IRQ_rcvd();
+ xpc_arch_ops.process_activate_IRQ_rcvd();
}
/* wait for IRQ or timeout */
init_waitqueue_head(&ch->idle_wq);
}
- ret = xpc_setup_ch_structures_sn(part);
+ ret = xpc_arch_ops.setup_ch_structures(part);
if (ret != xpSuccess)
goto out_2;
/* now we can begin tearing down the infrastructure */
- xpc_teardown_ch_structures_sn(part);
+ xpc_arch_ops.teardown_ch_structures(part);
kfree(part->remote_openclose_args_base);
part->remote_openclose_args = NULL;
dev_dbg(xpc_part, "activating partition %d\n", partid);
- xpc_allow_hb(partid);
+ xpc_arch_ops.allow_hb(partid);
if (xpc_setup_ch_structures(part) == xpSuccess) {
(void)xpc_part_ref(part); /* this will always succeed */
- if (xpc_make_first_contact(part) == xpSuccess) {
+ if (xpc_arch_ops.make_first_contact(part) == xpSuccess) {
xpc_mark_partition_active(part);
xpc_channel_mgr(part);
/* won't return until partition is deactivating */
xpc_teardown_ch_structures(part);
}
- xpc_disallow_hb(partid);
+ xpc_arch_ops.disallow_hb(partid);
xpc_mark_partition_inactive(part);
if (part->reason == xpReactivating) {
/* interrupting ourselves results in activating partition */
- xpc_request_partition_reactivation(part);
+ xpc_arch_ops.request_partition_reactivation(part);
}
return 0;
static void
xpc_kthread_waitmsgs(struct xpc_partition *part, struct xpc_channel *ch)
{
+ int (*n_of_deliverable_payloads) (struct xpc_channel *) =
+ xpc_arch_ops.n_of_deliverable_payloads;
+
do {
/* deliver messages to their intended recipients */
- while (xpc_n_of_deliverable_payloads(ch) > 0 &&
+ while (n_of_deliverable_payloads(ch) > 0 &&
!(ch->flags & XPC_C_DISCONNECTING)) {
xpc_deliver_payload(ch);
}
"wait_event_interruptible_exclusive()\n");
(void)wait_event_interruptible_exclusive(ch->idle_wq,
- (xpc_n_of_deliverable_payloads(ch) > 0 ||
+ (n_of_deliverable_payloads(ch) > 0 ||
(ch->flags & XPC_C_DISCONNECTING)));
atomic_dec(&ch->kthreads_idle);
struct xpc_channel *ch;
int n_needed;
unsigned long irq_flags;
+ int (*n_of_deliverable_payloads) (struct xpc_channel *) =
+ xpc_arch_ops.n_of_deliverable_payloads;
dev_dbg(xpc_chan, "kthread starting, partid=%d, channel=%d\n",
partid, ch_number);
* additional kthreads to help deliver them. We only
* need one less than total #of messages to deliver.
*/
- n_needed = xpc_n_of_deliverable_payloads(ch) - 1;
+ n_needed = n_of_deliverable_payloads(ch) - 1;
if (n_needed > 0 && !(ch->flags & XPC_C_DISCONNECTING))
xpc_activate_kthreads(ch, n_needed);
if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
atomic_dec_return(&part->nchannels_engaged) == 0) {
- xpc_indicate_partition_disengaged(part);
+ xpc_arch_ops.indicate_partition_disengaged(part);
}
xpc_msgqueue_deref(ch);
u64 args = XPC_PACK_ARGS(ch->partid, ch->number);
struct xpc_partition *part = &xpc_partitions[ch->partid];
struct task_struct *kthread;
+ void (*indicate_partition_disengaged) (struct xpc_partition *) =
+ xpc_arch_ops.indicate_partition_disengaged;
while (needed-- > 0) {
} else if (atomic_inc_return(&ch->kthreads_assigned) == 1 &&
atomic_inc_return(&part->nchannels_engaged) == 1) {
- xpc_indicate_partition_engaged(part);
+ xpc_arch_ops.indicate_partition_engaged(part);
}
(void)xpc_part_ref(part);
xpc_msgqueue_ref(ch);
if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
atomic_dec_return(&part->nchannels_engaged) == 0) {
- xpc_indicate_partition_disengaged(part);
+ indicate_partition_disengaged(part);
}
xpc_msgqueue_deref(ch);
xpc_part_deref(part);
atomic_set(&part->references, 0);
}
- return xpc_setup_partitions_sn();
+ return xpc_arch_ops.setup_partitions();
}
static void
xpc_teardown_partitions(void)
{
- xpc_teardown_partitions_sn();
+ xpc_arch_ops.teardown_partitions();
kfree(xpc_partitions);
}
disengage_timeout = part->disengage_timeout;
}
- if (xpc_any_partition_engaged()) {
+ if (xpc_arch_ops.any_partition_engaged()) {
if (time_is_before_jiffies(printmsg_time)) {
dev_info(xpc_part, "waiting for remote "
"partitions to deactivate, timeout in "
} while (1);
- DBUG_ON(xpc_any_partition_engaged());
- DBUG_ON(xpc_any_hbs_allowed() != 0);
+ DBUG_ON(xpc_arch_ops.any_partition_engaged());
xpc_teardown_rsvd_page();
/* keep xpc_hb_checker thread from doing anything (just in case) */
xpc_exiting = 1;
- xpc_disallow_all_hbs(); /*indicate we're deactivated */
+ xpc_arch_ops.disallow_all_hbs(); /*indicate we're deactivated */
for (partid = 0; partid < xp_max_npartitions; partid++) {
part = &xpc_partitions[partid];
- if (xpc_partition_engaged(partid) ||
+ if (xpc_arch_ops.partition_engaged(partid) ||
part->act_state != XPC_P_AS_INACTIVE) {
- xpc_request_partition_deactivation(part);
- xpc_indicate_partition_disengaged(part);
+ xpc_arch_ops.request_partition_deactivation(part);
+ xpc_arch_ops.indicate_partition_disengaged(part);
}
}
wait_to_print = XPC_DEACTIVATE_PRINTMSG_INTERVAL * 1000 * 5;
while (1) {
- any_engaged = xpc_any_partition_engaged();
+ any_engaged = xpc_arch_ops.any_partition_engaged();
if (!any_engaged) {
dev_info(xpc_part, "all partitions have deactivated\n");
break;
if (!keep_waiting--) {
for (partid = 0; partid < xp_max_npartitions;
partid++) {
- if (xpc_partition_engaged(partid)) {
+ if (xpc_arch_ops.partition_engaged(partid)) {
dev_info(xpc_part, "deactivate from "
"remote partition %d timed "
"out\n", partid);
/* fall through */
case DIE_MCA_MONARCH_ENTER:
case DIE_INIT_MONARCH_ENTER:
- xpc_offline_heartbeat();
+ xpc_arch_ops.offline_heartbeat();
break;
case DIE_KDEBUG_LEAVE:
/* fall through */
case DIE_MCA_MONARCH_LEAVE:
case DIE_INIT_MONARCH_LEAVE:
- xpc_online_heartbeat();
+ xpc_arch_ops.online_heartbeat();
break;
}
#else
size_t buf_len = 0;
void *buf = buf;
void *buf_base = NULL;
+ enum xp_retval (*get_partition_rsvd_page_pa)
+ (void *, u64 *, unsigned long *, size_t *) =
+ xpc_arch_ops.get_partition_rsvd_page_pa;
while (1) {
* ??? function or have two versions? Rename rp_pa for UV to
* ??? rp_gpa?
*/
- ret = xpc_get_partition_rsvd_page_pa(buf, &cookie, &rp_pa,
- &len);
+ ret = get_partition_rsvd_page_pa(buf, &cookie, &rp_pa, &len);
dev_dbg(xpc_part, "SAL returned with ret=%d, cookie=0x%016lx, "
"address=0x%016lx, len=0x%016lx\n", ret,
xpc_part_nasids = XPC_RP_PART_NASIDS(rp);
xpc_mach_nasids = XPC_RP_MACH_NASIDS(rp);
- ret = xpc_setup_rsvd_page_sn(rp);
+ ret = xpc_arch_ops.setup_rsvd_page(rp);
if (ret != 0)
return ret;
short partid = XPC_PARTID(part);
int disengaged;
- disengaged = !xpc_partition_engaged(partid);
+ disengaged = !xpc_arch_ops.partition_engaged(partid);
if (part->disengage_timeout) {
if (!disengaged) {
if (time_is_after_jiffies(part->disengage_timeout)) {
dev_info(xpc_part, "deactivate request to remote "
"partition %d timed out\n", partid);
xpc_disengage_timedout = 1;
- xpc_assume_partition_disengaged(partid);
+ xpc_arch_ops.assume_partition_disengaged(partid);
disengaged = 1;
}
part->disengage_timeout = 0;
if (part->act_state != XPC_P_AS_INACTIVE)
xpc_wakeup_channel_mgr(part);
- xpc_cancel_partition_deactivation_request(part);
+ xpc_arch_ops.cancel_partition_deactivation_request(part);
}
return disengaged;
}
spin_unlock_irqrestore(&part->act_lock, irq_flags);
if (reason == xpReactivating) {
/* we interrupt ourselves to reactivate partition */
- xpc_request_partition_reactivation(part);
+ xpc_arch_ops.request_partition_reactivation(part);
}
return;
}
spin_unlock_irqrestore(&part->act_lock, irq_flags);
/* ask remote partition to deactivate with regard to us */
- xpc_request_partition_deactivation(part);
+ xpc_arch_ops.request_partition_deactivation(part);
/* set a timelimit on the disengage phase of the deactivation request */
part->disengage_timeout = jiffies + (xpc_disengage_timelimit * HZ);
continue;
}
- xpc_request_partition_activation(remote_rp,
+ xpc_arch_ops.request_partition_activation(remote_rp,
remote_rp_pa, nasid);
}
}
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2008-2009 Silicon Graphics, Inc. All Rights Reserved.
*/
/*
static struct xpc_vars_part_sn2 *xpc_vars_part_sn2;
static int
-xpc_setup_partitions_sn_sn2(void)
+xpc_setup_partitions_sn2(void)
{
/* nothing needs to be done */
return 0;
}
static void
-xpc_teardown_partitions_sn_sn2(void)
+xpc_teardown_partitions_sn2(void)
{
/* nothing needs to be done */
}
XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_OPENREPLY, irq_flags);
}
+static void
+xpc_send_chctl_opencomplete_sn2(struct xpc_channel *ch,
+ unsigned long *irq_flags)
+{
+ XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_OPENCOMPLETE, irq_flags);
+}
+
static void
xpc_send_chctl_msgrequest_sn2(struct xpc_channel *ch)
{
static int
-xpc_setup_rsvd_page_sn_sn2(struct xpc_rsvd_page *rp)
+xpc_setup_rsvd_page_sn2(struct xpc_rsvd_page *rp)
{
struct amo *amos_page;
int i;
xpc_vars_sn2 = XPC_RP_VARS(rp);
- rp->sn.vars_pa = xp_pa(xpc_vars_sn2);
+ rp->sn.sn2.vars_pa = xp_pa(xpc_vars_sn2);
/* vars_part array follows immediately after vars */
xpc_vars_part_sn2 = (struct xpc_vars_part_sn2 *)((u8 *)XPC_RP_VARS(rp) +
return 0;
}
+static int
+xpc_hb_allowed_sn2(short partid, void *heartbeating_to_mask)
+{
+ return test_bit(partid, heartbeating_to_mask);
+}
+
+static void
+xpc_allow_hb_sn2(short partid)
+{
+ DBUG_ON(xpc_vars_sn2 == NULL);
+ set_bit(partid, xpc_vars_sn2->heartbeating_to_mask);
+}
+
+static void
+xpc_disallow_hb_sn2(short partid)
+{
+ DBUG_ON(xpc_vars_sn2 == NULL);
+ clear_bit(partid, xpc_vars_sn2->heartbeating_to_mask);
+}
+
+static void
+xpc_disallow_all_hbs_sn2(void)
+{
+ DBUG_ON(xpc_vars_sn2 == NULL);
+ bitmap_zero(xpc_vars_sn2->heartbeating_to_mask, xp_max_npartitions);
+}
+
static void
xpc_increment_heartbeat_sn2(void)
{
DBUG_ON(xpc_vars_sn2 == NULL);
bitmap_zero(xpc_vars_sn2->heartbeating_to_mask, XP_MAX_NPARTITIONS_SN2);
- xpc_heartbeating_to_mask = &xpc_vars_sn2->heartbeating_to_mask[0];
xpc_online_heartbeat_sn2();
}
remote_vars->heartbeating_to_mask[0]);
if ((remote_vars->heartbeat == part->last_heartbeat &&
- remote_vars->heartbeat_offline == 0) ||
- !xpc_hb_allowed(sn_partition_id,
- &remote_vars->heartbeating_to_mask)) {
+ !remote_vars->heartbeat_offline) ||
+ !xpc_hb_allowed_sn2(sn_partition_id,
+ remote_vars->heartbeating_to_mask)) {
ret = xpNoHeartbeat;
} else {
part->last_heartbeat = remote_vars->heartbeat;
return;
}
- remote_vars_pa = remote_rp->sn.vars_pa;
+ remote_vars_pa = remote_rp->sn.sn2.vars_pa;
remote_rp_version = remote_rp->version;
remote_rp_ts_jiffies = remote_rp->ts_jiffies;
* Setup the channel structures that are sn2 specific.
*/
static enum xp_retval
-xpc_setup_ch_structures_sn_sn2(struct xpc_partition *part)
+xpc_setup_ch_structures_sn2(struct xpc_partition *part)
{
struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
struct xpc_channel_sn2 *ch_sn2;
* Teardown the channel structures that are sn2 specific.
*/
static void
-xpc_teardown_ch_structures_sn_sn2(struct xpc_partition *part)
+xpc_teardown_ch_structures_sn2(struct xpc_partition *part)
{
struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
short partid = XPC_PARTID(part);
xpc_acknowledge_msgs_sn2(ch, get, msg->flags);
}
+static struct xpc_arch_operations xpc_arch_ops_sn2 = {
+ .setup_partitions = xpc_setup_partitions_sn2,
+ .teardown_partitions = xpc_teardown_partitions_sn2,
+ .process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_sn2,
+ .get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_sn2,
+ .setup_rsvd_page = xpc_setup_rsvd_page_sn2,
+
+ .allow_hb = xpc_allow_hb_sn2,
+ .disallow_hb = xpc_disallow_hb_sn2,
+ .disallow_all_hbs = xpc_disallow_all_hbs_sn2,
+ .increment_heartbeat = xpc_increment_heartbeat_sn2,
+ .offline_heartbeat = xpc_offline_heartbeat_sn2,
+ .online_heartbeat = xpc_online_heartbeat_sn2,
+ .heartbeat_init = xpc_heartbeat_init_sn2,
+ .heartbeat_exit = xpc_heartbeat_exit_sn2,
+ .get_remote_heartbeat = xpc_get_remote_heartbeat_sn2,
+
+ .request_partition_activation =
+ xpc_request_partition_activation_sn2,
+ .request_partition_reactivation =
+ xpc_request_partition_reactivation_sn2,
+ .request_partition_deactivation =
+ xpc_request_partition_deactivation_sn2,
+ .cancel_partition_deactivation_request =
+ xpc_cancel_partition_deactivation_request_sn2,
+
+ .setup_ch_structures = xpc_setup_ch_structures_sn2,
+ .teardown_ch_structures = xpc_teardown_ch_structures_sn2,
+
+ .make_first_contact = xpc_make_first_contact_sn2,
+
+ .get_chctl_all_flags = xpc_get_chctl_all_flags_sn2,
+ .send_chctl_closerequest = xpc_send_chctl_closerequest_sn2,
+ .send_chctl_closereply = xpc_send_chctl_closereply_sn2,
+ .send_chctl_openrequest = xpc_send_chctl_openrequest_sn2,
+ .send_chctl_openreply = xpc_send_chctl_openreply_sn2,
+ .send_chctl_opencomplete = xpc_send_chctl_opencomplete_sn2,
+ .process_msg_chctl_flags = xpc_process_msg_chctl_flags_sn2,
+
+ .save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_sn2,
+
+ .setup_msg_structures = xpc_setup_msg_structures_sn2,
+ .teardown_msg_structures = xpc_teardown_msg_structures_sn2,
+
+ .indicate_partition_engaged = xpc_indicate_partition_engaged_sn2,
+ .indicate_partition_disengaged = xpc_indicate_partition_disengaged_sn2,
+ .partition_engaged = xpc_partition_engaged_sn2,
+ .any_partition_engaged = xpc_any_partition_engaged_sn2,
+ .assume_partition_disengaged = xpc_assume_partition_disengaged_sn2,
+
+ .n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_sn2,
+ .send_payload = xpc_send_payload_sn2,
+ .get_deliverable_payload = xpc_get_deliverable_payload_sn2,
+ .received_payload = xpc_received_payload_sn2,
+ .notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_sn2,
+};
+
int
xpc_init_sn2(void)
{
int ret;
size_t buf_size;
- xpc_setup_partitions_sn = xpc_setup_partitions_sn_sn2;
- xpc_teardown_partitions_sn = xpc_teardown_partitions_sn_sn2;
- xpc_get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_sn2;
- xpc_setup_rsvd_page_sn = xpc_setup_rsvd_page_sn_sn2;
- xpc_increment_heartbeat = xpc_increment_heartbeat_sn2;
- xpc_offline_heartbeat = xpc_offline_heartbeat_sn2;
- xpc_online_heartbeat = xpc_online_heartbeat_sn2;
- xpc_heartbeat_init = xpc_heartbeat_init_sn2;
- xpc_heartbeat_exit = xpc_heartbeat_exit_sn2;
- xpc_get_remote_heartbeat = xpc_get_remote_heartbeat_sn2;
-
- xpc_request_partition_activation = xpc_request_partition_activation_sn2;
- xpc_request_partition_reactivation =
- xpc_request_partition_reactivation_sn2;
- xpc_request_partition_deactivation =
- xpc_request_partition_deactivation_sn2;
- xpc_cancel_partition_deactivation_request =
- xpc_cancel_partition_deactivation_request_sn2;
-
- xpc_process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_sn2;
- xpc_setup_ch_structures_sn = xpc_setup_ch_structures_sn_sn2;
- xpc_teardown_ch_structures_sn = xpc_teardown_ch_structures_sn_sn2;
- xpc_make_first_contact = xpc_make_first_contact_sn2;
-
- xpc_get_chctl_all_flags = xpc_get_chctl_all_flags_sn2;
- xpc_send_chctl_closerequest = xpc_send_chctl_closerequest_sn2;
- xpc_send_chctl_closereply = xpc_send_chctl_closereply_sn2;
- xpc_send_chctl_openrequest = xpc_send_chctl_openrequest_sn2;
- xpc_send_chctl_openreply = xpc_send_chctl_openreply_sn2;
-
- xpc_save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_sn2;
-
- xpc_setup_msg_structures = xpc_setup_msg_structures_sn2;
- xpc_teardown_msg_structures = xpc_teardown_msg_structures_sn2;
-
- xpc_notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_sn2;
- xpc_process_msg_chctl_flags = xpc_process_msg_chctl_flags_sn2;
- xpc_n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_sn2;
- xpc_get_deliverable_payload = xpc_get_deliverable_payload_sn2;
-
- xpc_indicate_partition_engaged = xpc_indicate_partition_engaged_sn2;
- xpc_indicate_partition_disengaged =
- xpc_indicate_partition_disengaged_sn2;
- xpc_partition_engaged = xpc_partition_engaged_sn2;
- xpc_any_partition_engaged = xpc_any_partition_engaged_sn2;
- xpc_assume_partition_disengaged = xpc_assume_partition_disengaged_sn2;
-
- xpc_send_payload = xpc_send_payload_sn2;
- xpc_received_payload = xpc_received_payload_sn2;
+ xpc_arch_ops = xpc_arch_ops_sn2;
if (offsetof(struct xpc_msg_sn2, payload) > XPC_MSG_HDR_MAX_SIZE) {
dev_err(xpc_part, "header portion of struct xpc_msg_sn2 is "
};
#endif
-static atomic64_t xpc_heartbeat_uv;
-static DECLARE_BITMAP(xpc_heartbeating_to_mask_uv, XP_MAX_NPARTITIONS_UV);
+static struct xpc_heartbeat_uv *xpc_heartbeat_uv;
#define XPC_ACTIVATE_MSG_SIZE_UV (1 * GRU_CACHE_LINE_BYTES)
#define XPC_ACTIVATE_MQ_SIZE_UV (4 * XP_MAX_NPARTITIONS_UV * \
static struct xpc_gru_mq_uv *xpc_notify_mq_uv;
static int
-xpc_setup_partitions_sn_uv(void)
+xpc_setup_partitions_uv(void)
{
short partid;
struct xpc_partition_uv *part_uv;
}
static void
-xpc_teardown_partitions_sn_uv(void)
+xpc_teardown_partitions_uv(void)
{
short partid;
struct xpc_partition_uv *part_uv;
/* syncing of remote_act_state was just done above */
break;
- case XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV: {
- struct xpc_activate_mq_msg_heartbeat_req_uv *msg;
-
- msg = container_of(msg_hdr,
- struct xpc_activate_mq_msg_heartbeat_req_uv,
- hdr);
- part_uv->heartbeat = msg->heartbeat;
- break;
- }
- case XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV: {
- struct xpc_activate_mq_msg_heartbeat_req_uv *msg;
-
- msg = container_of(msg_hdr,
- struct xpc_activate_mq_msg_heartbeat_req_uv,
- hdr);
- part_uv->heartbeat = msg->heartbeat;
-
- spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
- part_uv->flags |= XPC_P_HEARTBEAT_OFFLINE_UV;
- spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
- break;
- }
- case XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV: {
- struct xpc_activate_mq_msg_heartbeat_req_uv *msg;
-
- msg = container_of(msg_hdr,
- struct xpc_activate_mq_msg_heartbeat_req_uv,
- hdr);
- part_uv->heartbeat = msg->heartbeat;
-
- spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
- part_uv->flags &= ~XPC_P_HEARTBEAT_OFFLINE_UV;
- spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
- break;
- }
case XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV: {
struct xpc_activate_mq_msg_activate_req_uv *msg;
part_uv->act_state_req = XPC_P_ASR_ACTIVATE_UV;
part->remote_rp_pa = msg->rp_gpa; /* !!! _pa is _gpa */
part->remote_rp_ts_jiffies = msg_hdr->rp_ts_jiffies;
+ part_uv->heartbeat_gpa = msg->heartbeat_gpa;
if (msg->activate_gru_mq_desc_gpa !=
part_uv->activate_gru_mq_desc_gpa) {
xpc_wakeup_channel_mgr(part);
break;
}
+ case XPC_ACTIVATE_MQ_MSG_CHCTL_OPENCOMPLETE_UV: {
+ struct xpc_activate_mq_msg_chctl_opencomplete_uv *msg;
+
+ msg = container_of(msg_hdr, struct
+ xpc_activate_mq_msg_chctl_opencomplete_uv, hdr);
+ spin_lock_irqsave(&part->chctl_lock, irq_flags);
+ part->chctl.flags[msg->ch_number] |= XPC_CHCTL_OPENCOMPLETE;
+ spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+ xpc_wakeup_channel_mgr(part);
+ }
case XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV:
spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
part_uv->flags |= XPC_P_ENGAGED_UV;
/*
* !!! Make our side think that the remote partition sent an activate
- * !!! message our way by doing what the activate IRQ handler would
+ * !!! mq message our way by doing what the activate IRQ handler would
* !!! do had one really been sent.
*/
}
static int
-xpc_setup_rsvd_page_sn_uv(struct xpc_rsvd_page *rp)
+xpc_setup_rsvd_page_uv(struct xpc_rsvd_page *rp)
{
- rp->sn.activate_gru_mq_desc_gpa =
+ xpc_heartbeat_uv =
+ &xpc_partitions[sn_partition_id].sn.uv.cached_heartbeat;
+ rp->sn.uv.heartbeat_gpa = uv_gpa(xpc_heartbeat_uv);
+ rp->sn.uv.activate_gru_mq_desc_gpa =
uv_gpa(xpc_activate_mq_uv->gru_mq_desc);
return 0;
}
static void
-xpc_send_heartbeat_uv(int msg_type)
+xpc_allow_hb_uv(short partid)
{
- short partid;
- struct xpc_partition *part;
- struct xpc_activate_mq_msg_heartbeat_req_uv msg;
-
- /*
- * !!! On uv we're broadcasting a heartbeat message every 5 seconds.
- * !!! Whereas on sn2 we're bte_copy'ng the heartbeat info every 20
- * !!! seconds. This is an increase in numalink traffic.
- * ??? Is this good?
- */
-
- msg.heartbeat = atomic64_inc_return(&xpc_heartbeat_uv);
-
- partid = find_first_bit(xpc_heartbeating_to_mask_uv,
- XP_MAX_NPARTITIONS_UV);
-
- while (partid < XP_MAX_NPARTITIONS_UV) {
- part = &xpc_partitions[partid];
+}
- xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
- msg_type);
+static void
+xpc_disallow_hb_uv(short partid)
+{
+}
- partid = find_next_bit(xpc_heartbeating_to_mask_uv,
- XP_MAX_NPARTITIONS_UV, partid + 1);
- }
+static void
+xpc_disallow_all_hbs_uv(void)
+{
}
static void
xpc_increment_heartbeat_uv(void)
{
- xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV);
+ xpc_heartbeat_uv->value++;
}
static void
xpc_offline_heartbeat_uv(void)
{
- xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV);
+ xpc_increment_heartbeat_uv();
+ xpc_heartbeat_uv->offline = 1;
}
static void
xpc_online_heartbeat_uv(void)
{
- xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV);
+ xpc_increment_heartbeat_uv();
+ xpc_heartbeat_uv->offline = 0;
}
static void
xpc_heartbeat_init_uv(void)
{
- atomic64_set(&xpc_heartbeat_uv, 0);
- bitmap_zero(xpc_heartbeating_to_mask_uv, XP_MAX_NPARTITIONS_UV);
- xpc_heartbeating_to_mask = &xpc_heartbeating_to_mask_uv[0];
+ xpc_heartbeat_uv->value = 1;
+ xpc_heartbeat_uv->offline = 0;
}
static void
xpc_heartbeat_exit_uv(void)
{
- xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV);
+ xpc_offline_heartbeat_uv();
}
static enum xp_retval
xpc_get_remote_heartbeat_uv(struct xpc_partition *part)
{
struct xpc_partition_uv *part_uv = &part->sn.uv;
- enum xp_retval ret = xpNoHeartbeat;
+ enum xp_retval ret;
- if (part_uv->remote_act_state != XPC_P_AS_INACTIVE &&
- part_uv->remote_act_state != XPC_P_AS_DEACTIVATING) {
+ ret = xp_remote_memcpy(uv_gpa(&part_uv->cached_heartbeat),
+ part_uv->heartbeat_gpa,
+ sizeof(struct xpc_heartbeat_uv));
+ if (ret != xpSuccess)
+ return ret;
- if (part_uv->heartbeat != part->last_heartbeat ||
- (part_uv->flags & XPC_P_HEARTBEAT_OFFLINE_UV)) {
+ if (part_uv->cached_heartbeat.value == part->last_heartbeat &&
+ !part_uv->cached_heartbeat.offline) {
- part->last_heartbeat = part_uv->heartbeat;
- ret = xpSuccess;
- }
+ ret = xpNoHeartbeat;
+ } else {
+ part->last_heartbeat = part_uv->cached_heartbeat.value;
}
return ret;
}
part->remote_rp_pa = remote_rp_gpa; /* !!! _pa here is really _gpa */
part->remote_rp_ts_jiffies = remote_rp->ts_jiffies;
+ part->sn.uv.heartbeat_gpa = remote_rp->sn.uv.heartbeat_gpa;
part->sn.uv.activate_gru_mq_desc_gpa =
- remote_rp->sn.activate_gru_mq_desc_gpa;
+ remote_rp->sn.uv.activate_gru_mq_desc_gpa;
/*
* ??? Is it a good idea to make this conditional on what is
*/
if (part->sn.uv.remote_act_state == XPC_P_AS_INACTIVE) {
msg.rp_gpa = uv_gpa(xpc_rsvd_page);
+ msg.heartbeat_gpa = xpc_rsvd_page->sn.uv.heartbeat_gpa;
msg.activate_gru_mq_desc_gpa =
- xpc_rsvd_page->sn.activate_gru_mq_desc_gpa;
+ xpc_rsvd_page->sn.uv.activate_gru_mq_desc_gpa;
xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV);
}
* Setup the channel structures that are uv specific.
*/
static enum xp_retval
-xpc_setup_ch_structures_sn_uv(struct xpc_partition *part)
+xpc_setup_ch_structures_uv(struct xpc_partition *part)
{
struct xpc_channel_uv *ch_uv;
int ch_number;
* Teardown the channel structures that are uv specific.
*/
static void
-xpc_teardown_ch_structures_sn_uv(struct xpc_partition *part)
+xpc_teardown_ch_structures_uv(struct xpc_partition *part)
{
/* nothing needs to be done */
return;
XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV);
}
+static void
+xpc_send_chctl_opencomplete_uv(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+ struct xpc_activate_mq_msg_chctl_opencomplete_uv msg;
+
+ msg.ch_number = ch->number;
+ xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg),
+ XPC_ACTIVATE_MQ_MSG_CHCTL_OPENCOMPLETE_UV);
+}
+
static void
xpc_send_chctl_local_msgrequest_uv(struct xpc_partition *part, int ch_number)
{
msg->hdr.msg_slot_number += ch->remote_nentries;
}
+static struct xpc_arch_operations xpc_arch_ops_uv = {
+ .setup_partitions = xpc_setup_partitions_uv,
+ .teardown_partitions = xpc_teardown_partitions_uv,
+ .process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_uv,
+ .get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_uv,
+ .setup_rsvd_page = xpc_setup_rsvd_page_uv,
+
+ .allow_hb = xpc_allow_hb_uv,
+ .disallow_hb = xpc_disallow_hb_uv,
+ .disallow_all_hbs = xpc_disallow_all_hbs_uv,
+ .increment_heartbeat = xpc_increment_heartbeat_uv,
+ .offline_heartbeat = xpc_offline_heartbeat_uv,
+ .online_heartbeat = xpc_online_heartbeat_uv,
+ .heartbeat_init = xpc_heartbeat_init_uv,
+ .heartbeat_exit = xpc_heartbeat_exit_uv,
+ .get_remote_heartbeat = xpc_get_remote_heartbeat_uv,
+
+ .request_partition_activation =
+ xpc_request_partition_activation_uv,
+ .request_partition_reactivation =
+ xpc_request_partition_reactivation_uv,
+ .request_partition_deactivation =
+ xpc_request_partition_deactivation_uv,
+ .cancel_partition_deactivation_request =
+ xpc_cancel_partition_deactivation_request_uv,
+
+ .setup_ch_structures = xpc_setup_ch_structures_uv,
+ .teardown_ch_structures = xpc_teardown_ch_structures_uv,
+
+ .make_first_contact = xpc_make_first_contact_uv,
+
+ .get_chctl_all_flags = xpc_get_chctl_all_flags_uv,
+ .send_chctl_closerequest = xpc_send_chctl_closerequest_uv,
+ .send_chctl_closereply = xpc_send_chctl_closereply_uv,
+ .send_chctl_openrequest = xpc_send_chctl_openrequest_uv,
+ .send_chctl_openreply = xpc_send_chctl_openreply_uv,
+ .send_chctl_opencomplete = xpc_send_chctl_opencomplete_uv,
+ .process_msg_chctl_flags = xpc_process_msg_chctl_flags_uv,
+
+ .save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_uv,
+
+ .setup_msg_structures = xpc_setup_msg_structures_uv,
+ .teardown_msg_structures = xpc_teardown_msg_structures_uv,
+
+ .indicate_partition_engaged = xpc_indicate_partition_engaged_uv,
+ .indicate_partition_disengaged = xpc_indicate_partition_disengaged_uv,
+ .assume_partition_disengaged = xpc_assume_partition_disengaged_uv,
+ .partition_engaged = xpc_partition_engaged_uv,
+ .any_partition_engaged = xpc_any_partition_engaged_uv,
+
+ .n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_uv,
+ .send_payload = xpc_send_payload_uv,
+ .get_deliverable_payload = xpc_get_deliverable_payload_uv,
+ .received_payload = xpc_received_payload_uv,
+ .notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_uv,
+};
+
int
xpc_init_uv(void)
{
- xpc_setup_partitions_sn = xpc_setup_partitions_sn_uv;
- xpc_teardown_partitions_sn = xpc_teardown_partitions_sn_uv;
- xpc_process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_uv;
- xpc_get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_uv;
- xpc_setup_rsvd_page_sn = xpc_setup_rsvd_page_sn_uv;
- xpc_increment_heartbeat = xpc_increment_heartbeat_uv;
- xpc_offline_heartbeat = xpc_offline_heartbeat_uv;
- xpc_online_heartbeat = xpc_online_heartbeat_uv;
- xpc_heartbeat_init = xpc_heartbeat_init_uv;
- xpc_heartbeat_exit = xpc_heartbeat_exit_uv;
- xpc_get_remote_heartbeat = xpc_get_remote_heartbeat_uv;
-
- xpc_request_partition_activation = xpc_request_partition_activation_uv;
- xpc_request_partition_reactivation =
- xpc_request_partition_reactivation_uv;
- xpc_request_partition_deactivation =
- xpc_request_partition_deactivation_uv;
- xpc_cancel_partition_deactivation_request =
- xpc_cancel_partition_deactivation_request_uv;
-
- xpc_setup_ch_structures_sn = xpc_setup_ch_structures_sn_uv;
- xpc_teardown_ch_structures_sn = xpc_teardown_ch_structures_sn_uv;
-
- xpc_make_first_contact = xpc_make_first_contact_uv;
-
- xpc_get_chctl_all_flags = xpc_get_chctl_all_flags_uv;
- xpc_send_chctl_closerequest = xpc_send_chctl_closerequest_uv;
- xpc_send_chctl_closereply = xpc_send_chctl_closereply_uv;
- xpc_send_chctl_openrequest = xpc_send_chctl_openrequest_uv;
- xpc_send_chctl_openreply = xpc_send_chctl_openreply_uv;
-
- xpc_save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_uv;
-
- xpc_setup_msg_structures = xpc_setup_msg_structures_uv;
- xpc_teardown_msg_structures = xpc_teardown_msg_structures_uv;
-
- xpc_indicate_partition_engaged = xpc_indicate_partition_engaged_uv;
- xpc_indicate_partition_disengaged =
- xpc_indicate_partition_disengaged_uv;
- xpc_assume_partition_disengaged = xpc_assume_partition_disengaged_uv;
- xpc_partition_engaged = xpc_partition_engaged_uv;
- xpc_any_partition_engaged = xpc_any_partition_engaged_uv;
-
- xpc_n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_uv;
- xpc_process_msg_chctl_flags = xpc_process_msg_chctl_flags_uv;
- xpc_send_payload = xpc_send_payload_uv;
- xpc_notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_uv;
- xpc_get_deliverable_payload = xpc_get_deliverable_payload_uv;
- xpc_received_payload = xpc_received_payload_uv;
+ xpc_arch_ops = xpc_arch_ops_uv;
if (sizeof(struct xpc_notify_mq_msghdr_uv) > XPC_MSG_HDR_MAX_SIZE) {
dev_err(xpc_part, "xpc_notify_mq_msghdr_uv is larger than %d\n",
* various kernel subsystems to support the mechanics required by a
* fixed-high-32-bit system.
*/
- if ((pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) ||
- (pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK) != 0)) {
+ if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) ||
+ (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)) {
dev_err(&pdev->dev, "No usable DMA configuration,aborting\n");
goto err_dma;
}
be_msix_enable(adapter);
- status = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
+ status = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
if (!status) {
netdev->features |= NETIF_F_HIGHDMA;
} else {
- status = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ status = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (status) {
dev_err(&pdev->dev, "Could not set PCI DMA Mask\n");
goto free_netdev;
jme_pci_dma64(struct pci_dev *pdev)
{
if (pdev->device == PCI_DEVICE_ID_JMICRON_JMC250 &&
- !pci_set_dma_mask(pdev, DMA_64BIT_MASK))
- if (!pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))
+ !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)))
+ if (!pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)))
return 1;
if (pdev->device == PCI_DEVICE_ID_JMICRON_JMC250 &&
- !pci_set_dma_mask(pdev, DMA_40BIT_MASK))
- if (!pci_set_consistent_dma_mask(pdev, DMA_40BIT_MASK))
+ !pci_set_dma_mask(pdev, DMA_BIT_MASK(40)))
+ if (!pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(40)))
return 1;
if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))
if (pci_enable_device(pdev))
return -EIO;
- ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (ret) {
printk(KERN_ERR "ath9k: 32-bit DMA not available\n");
goto bad;
}
- ret = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (ret) {
printk(KERN_ERR "ath9k: 32-bit DMA consistent "
goto err_disable_dev;
}
- if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) ||
- pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) ||
+ pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
dev_err(&pdev->dev, "No suitable DMA available\n");
goto err_free_reg;
}
0 /*base_hi*/,
PAR_IRQ,
PARPORT_DMA_NONE /* dma */,
- NULL /*struct pci_dev* */) )
+ NULL /*struct pci_dev* */),
+ 0 /* shared irq flags */ )
printk(KERN_WARNING PFX "Probing parallel port failed.\n");
#endif /* CONFIG_PARPORT_PC */
pci_set_master(pdev);
pci_try_set_mwi(pdev);
- if (pci_set_dma_mask(pdev, DMA_64BIT_MASK)
- || pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))
- if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)
- || pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
+ || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)))
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
+ || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
TW_PRINTK(host, TW_DRIVER, 0x40, "Failed to set dma mask during resume");
retval = -ENODEV;
goto out_disable_device;
if (dev->nondasd_support && !dev->in_reset)
printk(KERN_INFO "%s%d: Non-DASD support enabled.\n",dev->name, dev->id);
- if (dma_get_required_mask(&dev->pdev->dev) > DMA_32BIT_MASK)
+ if (dma_get_required_mask(&dev->pdev->dev) > DMA_BIT_MASK(32))
dev->needs_dac = 1;
dev->dac_support = 0;
if ((sizeof(dma_addr_t) > 4) && dev->needs_dac &&
*/
cmd->sense_buffer[8] = 0; /* Information */
cmd->sense_buffer[9] = 0xa; /* Add. length */
- do_div(bghm, cmd->device->sector_size);
+ bghm /= cmd->device->sector_size;
failing_sector = scsi_get_lba(cmd);
failing_sector += bghm;
if (sizeof(dma_addr_t) > 4) {
const uint64_t required_mask =
dma_get_required_mask(&pdev->dev);
- if ((required_mask > DMA_32BIT_MASK) && !pci_set_dma_mask(pdev,
- DMA_64BIT_MASK) && !pci_set_consistent_dma_mask(pdev,
- DMA_64BIT_MASK)) {
+ if ((required_mask > DMA_BIT_MASK(32)) && !pci_set_dma_mask(pdev,
+ DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(pdev,
+ DMA_BIT_MASK(64))) {
ioc->base_add_sg_single = &_base_add_sg_single_64;
ioc->sge_size = sizeof(Mpi2SGESimple64_t);
desc = "64";
}
}
- if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)
- && !pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
+ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
+ && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
ioc->base_add_sg_single = &_base_add_sg_single_32;
ioc->sge_size = sizeof(Mpi2SGESimple32_t);
desc = "32";
int status;
struct spi_message message;
- struct spi_transfer x;
+ struct spi_transfer x[2];
u8 *local_buf;
/* Use preallocated DMA-safe buffer. We can't avoid copying here,
return -EINVAL;
spi_message_init(&message);
- memset(&x, 0, sizeof x);
- x.len = n_tx + n_rx;
- spi_message_add_tail(&x, &message);
+ memset(x, 0, sizeof x);
+ if (n_tx) {
+ x[0].len = n_tx;
+ spi_message_add_tail(&x[0], &message);
+ }
+ if (n_rx) {
+ x[1].len = n_rx;
+ spi_message_add_tail(&x[1], &message);
+ }
/* ... unless someone else is using the pre-allocated buffer */
if (!mutex_trylock(&lock)) {
local_buf = buf;
memcpy(local_buf, txbuf, n_tx);
- x.tx_buf = local_buf;
- x.rx_buf = local_buf;
+ x[0].tx_buf = local_buf;
+ x[1].rx_buf = local_buf + n_tx;
/* do the i/o */
status = spi_sync(spi, &message);
if (status == 0)
- memcpy(rxbuf, x.rx_buf + n_tx, n_rx);
+ memcpy(rxbuf, x[1].rx_buf, n_rx);
- if (x.tx_buf == buf)
+ if (x[0].tx_buf == buf)
mutex_unlock(&lock);
else
kfree(local_buf);
pci_set_master(pdev);
- r = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ r = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (r) {
dev_err(&pdev->dev, "no usable DMA configuration\n");
goto err_free_res;
tty->driver_data = acm;
acm->tty = tty;
- /* force low_latency on so that our tty_push actually forces the data through,
- otherwise it is scheduled, and with high data rates data can get lost. */
- tty->low_latency = 1;
-
if (usb_autopm_get_interface(acm->control) < 0)
goto early_bail;
else
struct device *dev;
};
-static u64 nop_xceiv_dmamask = DMA_32BIT_MASK;
+static u64 nop_xceiv_dmamask = DMA_BIT_MASK(32);
static struct platform_device nop_xceiv_device = {
.name = "nop_usb_xceiv",
.id = -1,
.dev = {
.dma_mask = &nop_xceiv_dmamask,
- .coherent_dma_mask = DMA_32BIT_MASK,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = NULL,
},
};
}
tty = tty_port_tty_get(&port->port);
- if (tty && urb->actual_length) {
- usb_serial_debug_data(debug, dev, __func__,
- urb->actual_length, urb->transfer_buffer);
-
- if (!tport->tp_is_open)
- dbg("%s - port closed, dropping data", __func__);
- else
- ti_recv(&urb->dev->dev, tty,
+ if (tty) {
+ if (urb->actual_length) {
+ usb_serial_debug_data(debug, dev, __func__,
+ urb->actual_length, urb->transfer_buffer);
+
+ if (!tport->tp_is_open)
+ dbg("%s - port closed, dropping data",
+ __func__);
+ else
+ ti_recv(&urb->dev->dev, tty,
urb->transfer_buffer,
urb->actual_length);
-
- spin_lock(&tport->tp_lock);
- tport->tp_icount.rx += urb->actual_length;
- spin_unlock(&tport->tp_lock);
+ spin_lock(&tport->tp_lock);
+ tport->tp_icount.rx += urb->actual_length;
+ spin_unlock(&tport->tp_lock);
+ }
tty_kref_put(tty);
}
found:
/*
* Some methods fail to retrieve SCLK and MCLK values, we apply default
- * settings in this case (200Mhz). If that really happne often, we could
- * fetch from registers instead...
+ * settings in this case (200Mhz). If that really happens often, we
+ * could fetch from registers instead...
*/
if (rinfo->pll.mclk == 0)
rinfo->pll.mclk = 20000;
return 0;
bd = container_of(self, struct backlight_device, fb_notif);
- if (!lock_fb_info(evdata->info))
- return -ENODEV;
mutex_lock(&bd->ops_lock);
if (bd->ops)
if (!bd->ops->check_fb ||
backlight_update_status(bd);
}
mutex_unlock(&bd->ops_lock);
- unlock_fb_info(evdata->info);
return 0;
}
if (!ld->ops)
return 0;
- if (!lock_fb_info(evdata->info))
- return -ENODEV;
mutex_lock(&ld->ops_lock);
if (!ld->ops->check_fb || ld->ops->check_fb(ld, evdata->info)) {
if (event == FB_EVENT_BLANK) {
}
}
mutex_unlock(&ld->ops_lock);
- unlock_fb_info(evdata->info);
return 0;
}
default:
dev_dbg(info->device,
"Unsupported bpp size: %d\n", var->bits_per_pixel);
- assert(false);
- /* should never occur */
- break;
+ return -EINVAL;
}
if (var->xres_virtual < var->xres)
}
+ if (!lock_fb_info(info))
+ return;
event.info = info;
event.data = ␣
fb_notifier_call_chain(FB_EVENT_CONBLANK, &event);
+ unlock_fb_info(info);
}
static int fbcon_blank(struct vc_data *vc, int blank, int mode_switch)
{
int i, idx;
- if (!lock_fb_info(info))
- return -ENODEV;
idx = info->node;
for (i = first_fb_vc; i <= last_fb_vc; i++) {
if (con2fb_map[i] == idx)
if (primary_device == idx)
primary_device = -1;
- unlock_fb_info(info);
-
if (!num_registered_fb)
unregister_con_driver(&fb_con);
{
int ret = 0, i, idx;
- if (!lock_fb_info(info))
- return -ENODEV;
idx = info->node;
fbcon_select_primary(info);
- unlock_fb_info(info);
if (info_idx == -1) {
for (i = first_fb_vc; i <= last_fb_vc; i++) {
switch(action) {
case FB_EVENT_SUSPEND:
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
fbcon_suspended(info);
- unlock_fb_info(info);
break;
case FB_EVENT_RESUME:
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
fbcon_resumed(info);
- unlock_fb_info(info);
break;
case FB_EVENT_MODE_CHANGE:
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
fbcon_modechanged(info);
- unlock_fb_info(info);
break;
case FB_EVENT_MODE_CHANGE_ALL:
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
fbcon_set_all_vcs(info);
- unlock_fb_info(info);
break;
case FB_EVENT_MODE_DELETE:
mode = event->data;
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
ret = fbcon_mode_deleted(info, mode);
- unlock_fb_info(info);
break;
case FB_EVENT_FB_UNBIND:
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
idx = info->node;
- unlock_fb_info(info);
ret = fbcon_fb_unbind(idx);
break;
case FB_EVENT_FB_REGISTERED:
con2fb->framebuffer = con2fb_map[con2fb->console - 1];
break;
case FB_EVENT_BLANK:
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
fbcon_fb_blanked(info, *(int *)event->data);
- unlock_fb_info(info);
break;
case FB_EVENT_NEW_MODELIST:
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
fbcon_new_modelist(info);
- unlock_fb_info(info);
break;
case FB_EVENT_GET_REQ:
caps = event->data;
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
fbcon_get_requirement(info, caps);
- unlock_fb_info(info);
break;
}
done:
unsigned int size_total;
int request_succeeded = 0;
- printk(KERN_INFO "efifb: probing for efifb\n");
-
if (!screen_info.lfb_depth)
screen_info.lfb_depth = 32;
if (!screen_info.pages)
screen_info.pages = 1;
+ if (!screen_info.lfb_base) {
+ printk(KERN_DEBUG "efifb: invalid framebuffer address\n");
+ return -ENODEV;
+ }
+ printk(KERN_INFO "efifb: probing for efifb\n");
/* just assume they're all unset if any are */
if (!screen_info.blue_size) {
return -EINVAL;
con2fb.framebuffer = -1;
event.data = &con2fb;
+ if (!lock_fb_info(info))
+ return -ENODEV;
event.info = info;
fb_notifier_call_chain(FB_EVENT_GET_CONSOLE_MAP, &event);
+ unlock_fb_info(info);
ret = copy_to_user(argp, &con2fb, sizeof(con2fb)) ? -EFAULT : 0;
break;
case FBIOPUT_CON2FBMAP:
break;
}
event.data = &con2fb;
+ if (!lock_fb_info(info))
+ return -ENODEV;
event.info = info;
ret = fb_notifier_call_chain(FB_EVENT_SET_CONSOLE_MAP, &event);
+ unlock_fb_info(info);
break;
case FBIOBLANK:
if (!lock_fb_info(info))
registered_fb[i] = fb_info;
event.info = fb_info;
+ if (!lock_fb_info(fb_info))
+ return -ENODEV;
fb_notifier_call_chain(FB_EVENT_FB_REGISTERED, &event);
+ unlock_fb_info(fb_info);
return 0;
}
goto done;
}
+
+ if (!lock_fb_info(fb_info))
+ return -ENODEV;
event.info = fb_info;
ret = fb_notifier_call_chain(FB_EVENT_FB_UNBIND, &event);
+ unlock_fb_info(fb_info);
if (ret) {
ret = -EINVAL;
{
struct fb_event event;
+ if (!lock_fb_info(info))
+ return;
event.info = info;
if (state) {
fb_notifier_call_chain(FB_EVENT_SUSPEND, &event);
info->state = FBINFO_STATE_RUNNING;
fb_notifier_call_chain(FB_EVENT_RESUME, &event);
}
+ unlock_fb_info(info);
}
/**
err = 1;
if (!list_empty(&info->modelist)) {
+ if (!lock_fb_info(info))
+ return -ENODEV;
event.info = info;
err = fb_notifier_call_chain(FB_EVENT_NEW_MODELIST, &event);
+ unlock_fb_info(info);
}
return err;
#define PCI_DEVICE_ID_INTEL_830M 0x3577
#define PCI_DEVICE_ID_INTEL_845G 0x2562
#define PCI_DEVICE_ID_INTEL_85XGM 0x3582
+#define PCI_DEVICE_ID_INTEL_854 0x358E
#define PCI_DEVICE_ID_INTEL_865G 0x2572
#define PCI_DEVICE_ID_INTEL_915G 0x2582
#define PCI_DEVICE_ID_INTEL_915GM 0x2592
INTEL_85XGM,
INTEL_852GM,
INTEL_852GME,
+ INTEL_854,
INTEL_855GM,
INTEL_855GME,
INTEL_865G,
switch(dinfo->chipset) {
case INTEL_830M:
case INTEL_845G:
+ case INTEL_854:
case INTEL_855GM:
case INTEL_865G:
dinfo->output[i].type = INTELFB_OUTPUT_DVO;
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_845G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_845G },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_85XGM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_85XGM },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_865G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_865G },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_854, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_854 },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_915G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_915G },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_915GM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_915GM },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_945G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_945G },
dinfo->mobile = 0;
dinfo->pll_index = PLLS_I8xx;
return 0;
+ case PCI_DEVICE_ID_INTEL_854:
+ dinfo->mobile = 1;
+ dinfo->name = "Intel(R) 854";
+ dinfo->chipset = INTEL_854;
+ return 0;
case PCI_DEVICE_ID_INTEL_85XGM:
tmp = 0;
dinfo->mobile = 1;
static const struct svga_fb_format s3fb_formats[] = {
{ 0, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 0,
FB_TYPE_TEXT, FB_AUX_TEXT_SVGA_STEP4, FB_VISUAL_PSEUDOCOLOR, 8, 16},
- { 4, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 0,
+ { 4, {0, 4, 0}, {0, 4, 0}, {0, 4, 0}, {0, 0, 0}, 0,
FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_PSEUDOCOLOR, 8, 16},
- { 4, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 1,
+ { 4, {0, 4, 0}, {0, 4, 0}, {0, 4, 0}, {0, 0, 0}, 1,
FB_TYPE_INTERLEAVED_PLANES, 1, FB_VISUAL_PSEUDOCOLOR, 8, 16},
- { 8, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 0,
+ { 8, {0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0}, 0,
FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_PSEUDOCOLOR, 4, 8},
{16, {10, 5, 0}, {5, 5, 0}, {0, 5, 0}, {0, 0, 0}, 0,
FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 2, 4},
extern void (*sa1100fb_backlight_power)(int on);
extern void (*sa1100fb_lcd_power)(int on);
-/*
- * IMHO this looks wrong. In 8BPP, length should be 8.
- */
-static struct sa1100fb_rgb rgb_8 = {
+static struct sa1100fb_rgb rgb_4 = {
.red = { .offset = 0, .length = 4, },
.green = { .offset = 0, .length = 4, },
.blue = { .offset = 0, .length = 4, },
.transp = { .offset = 0, .length = 0, },
};
+static struct sa1100fb_rgb rgb_8 = {
+ .red = { .offset = 0, .length = 8, },
+ .green = { .offset = 0, .length = 8, },
+ .blue = { .offset = 0, .length = 8, },
+ .transp = { .offset = 0, .length = 0, },
+};
+
static struct sa1100fb_rgb def_rgb_16 = {
.red = { .offset = 11, .length = 5, },
.green = { .offset = 5, .length = 6, },
DPRINTK("var->bits_per_pixel=%d\n", var->bits_per_pixel);
switch (var->bits_per_pixel) {
case 4:
- rgbidx = RGB_8;
+ rgbidx = RGB_4;
break;
case 8:
rgbidx = RGB_8;
fbi->fb.monspecs = monspecs;
fbi->fb.pseudo_palette = (fbi + 1);
+ fbi->rgb[RGB_4] = &rgb_4;
fbi->rgb[RGB_8] = &rgb_8;
fbi->rgb[RGB_16] = &def_rgb_16;
unsigned long lccr3;
};
-#define RGB_8 (0)
-#define RGB_16 (1)
-#define NR_RGB 2
+#define RGB_4 (0)
+#define RGB_8 (1)
+#define RGB_16 (2)
+#define NR_RGB 3
struct sa1100fb_info {
struct fb_info fb;
switch(var->bits_per_pixel) {
case 8:
var->red.offset = var->green.offset = var->blue.offset = 0;
- var->red.length = var->green.length = var->blue.length = 6;
+ var->red.length = var->green.length = var->blue.length = 8;
break;
case 16:
var->red.offset = 11;
* color depth = SUM(var->{color}.length)
*
* Pseudocolor:
- * var->{color}.offset is 0
- * var->{color}.length contains width of DAC or the number of unique
- * colors available (color depth)
+ * var->{color}.offset is 0 unless the palette index takes less than
+ * bits_per_pixel bits and is stored in the upper
+ * bits of the pixel value
+ * var->{color}.length is set so that 1 << length is the number of
+ * available palette entries
* pseudo_palette is not used
* RAMDAC[X] is programmed to (red, green, blue)
* color depth = var->{color}.length
static u16 maxhf __devinitdata; /* maximum horizontal frequency */
static u16 vbemode __devinitdata; /* force use of a specific VBE mode */
static char *mode_option __devinitdata;
+static u8 dac_width = 6;
static struct uvesafb_ktask *uvfb_tasks[UVESAFB_TASKS_MAX];
static DEFINE_MUTEX(uvfb_lock);
var->blue.offset = 0;
var->transp.offset = 0;
- /*
- * We're assuming that we can switch the DAC to 8 bits. If
- * this proves to be incorrect, we'll update the fields
- * later in set_par().
- */
- if (par->vbe_ib.capabilities & VBE_CAP_CAN_SWITCH_DAC) {
- var->red.length = 8;
- var->green.length = 8;
- var->blue.length = 8;
- var->transp.length = 0;
- } else {
- var->red.length = 6;
- var->green.length = 6;
- var->blue.length = 6;
- var->transp.length = 0;
- }
+ var->red.length = 8;
+ var->green.length = 8;
+ var->blue.length = 8;
+ var->transp.length = 0;
}
}
struct fb_info *info)
{
struct uvesafb_pal_entry entry;
- int shift = 16 - info->var.green.length;
+ int shift = 16 - dac_width;
int err = 0;
if (regno >= info->cmap.len)
static int uvesafb_setcmap(struct fb_cmap *cmap, struct fb_info *info)
{
struct uvesafb_pal_entry *entries;
- int shift = 16 - info->var.green.length;
+ int shift = 16 - dac_width;
int i, err = 0;
if (info->var.bits_per_pixel == 8) {
err = uvesafb_exec(task);
if (err || (task->t.regs.eax & 0xffff) != 0x004f ||
((task->t.regs.ebx & 0xff00) >> 8) != 8) {
- /*
- * We've failed to set the DAC palette format -
- * time to correct var.
- */
- info->var.red.length = 6;
- info->var.green.length = 6;
- info->var.blue.length = 6;
+ dac_width = 6;
+ } else {
+ dac_width = 8;
}
}
* {hardwarespecific} contains width of RAMDAC
* cmap[X] is programmed to (X << red.offset) | (X << green.offset) | (X << blue.offset)
* RAMDAC[X] is programmed to (red, green, blue)
- *
+ *
* Pseudocolor:
- * uses offset = 0 && length = RAMDAC register width.
- * var->{color}.offset is 0
- * var->{color}.length contains widht of DAC
+ * var->{color}.offset is 0 unless the palette index takes less than
+ * bits_per_pixel bits and is stored in the upper
+ * bits of the pixel value
+ * var->{color}.length is set so that 1 << length is the number of available
+ * palette entries
* cmap is not used
* RAMDAC[X] is programmed to (red, green, blue)
+ *
* Truecolor:
* does not use DAC. Usually 3 are present.
* var->{color}.offset contains start of bitfield
set_cpu_present(cpu, false);
}
-static void vcpu_hotplug(unsigned int cpu)
+static int vcpu_online(unsigned int cpu)
{
int err;
char dir[32], state[32];
- if (!cpu_possible(cpu))
- return;
-
sprintf(dir, "cpu/%u", cpu);
err = xenbus_scanf(XBT_NIL, dir, "availability", "%s", state);
if (err != 1) {
printk(KERN_ERR "XENBUS: Unable to read cpu state\n");
- return;
+ return err;
}
- if (strcmp(state, "online") == 0) {
+ if (strcmp(state, "online") == 0)
+ return 1;
+ else if (strcmp(state, "offline") == 0)
+ return 0;
+
+ printk(KERN_ERR "XENBUS: unknown state(%s) on CPU%d\n", state, cpu);
+ return -EINVAL;
+}
+static void vcpu_hotplug(unsigned int cpu)
+{
+ if (!cpu_possible(cpu))
+ return;
+
+ switch (vcpu_online(cpu)) {
+ case 1:
enable_hotplug_cpu(cpu);
- } else if (strcmp(state, "offline") == 0) {
+ break;
+ case 0:
(void)cpu_down(cpu);
disable_hotplug_cpu(cpu);
- } else {
- printk(KERN_ERR "XENBUS: unknown state(%s) on CPU%d\n",
- state, cpu);
+ break;
+ default:
+ break;
}
}
static int setup_cpu_watcher(struct notifier_block *notifier,
unsigned long event, void *data)
{
+ int cpu;
static struct xenbus_watch cpu_watch = {
.node = "cpu",
.callback = handle_vcpu_hotplug_event};
(void)register_xenbus_watch(&cpu_watch);
+ for_each_possible_cpu(cpu) {
+ if (vcpu_online(cpu) == 0) {
+ (void)cpu_down(cpu);
+ cpu_clear(cpu, cpu_present_map);
+ }
+ }
+
return NOTIFY_DONE;
}
gnttab_resume();
xen_mm_unpin_all();
- sysdev_resume();
-
if (!*cancelled) {
xen_irq_resume();
xen_console_resume();
xen_timer_resume();
}
+ sysdev_resume();
+ device_power_up(PMSG_RESUME);
+
return 0;
}
if (depth == 0)
return (err);
-reread:
- partial = ext2_get_branch(inode, depth, offsets, chain, &err);
+ partial = ext2_get_branch(inode, depth, offsets, chain, &err);
/* Simplest case - block found, no allocation needed */
if (!partial) {
first_block = le32_to_cpu(chain[depth - 1].key);
while (count < maxblocks && count <= blocks_to_boundary) {
ext2_fsblk_t blk;
- if (!verify_chain(chain, partial)) {
+ if (!verify_chain(chain, chain + depth - 1)) {
/*
* Indirect block might be removed by
* truncate while we were reading it.
* Handling of that case: forget what we've
* got now, go to reread.
*/
+ err = -EAGAIN;
count = 0;
- goto changed;
+ break;
}
blk = le32_to_cpu(*(chain[depth-1].p + count));
if (blk == first_block + count)
else
break;
}
- goto got_it;
+ if (err != -EAGAIN)
+ goto got_it;
}
/* Next simple case - plain lookup or failed read of indirect block */
goto cleanup;
mutex_lock(&ei->truncate_mutex);
+ /*
+ * If the indirect block is missing while we are reading
+ * the chain(ext3_get_branch() returns -EAGAIN err), or
+ * if the chain has been changed after we grab the semaphore,
+ * (either because another process truncated this branch, or
+ * another get_block allocated this branch) re-grab the chain to see if
+ * the request block has been allocated or not.
+ *
+ * Since we already block the truncate/other get_block
+ * at this point, we will have the current copy of the chain when we
+ * splice the branch into the tree.
+ */
+ if (err == -EAGAIN || !verify_chain(chain, partial)) {
+ while (partial > chain) {
+ brelse(partial->bh);
+ partial--;
+ }
+ partial = ext2_get_branch(inode, depth, offsets, chain, &err);
+ if (!partial) {
+ count++;
+ mutex_unlock(&ei->truncate_mutex);
+ if (err)
+ goto cleanup;
+ clear_buffer_new(bh_result);
+ goto got_it;
+ }
+ }
/*
* Okay, we need to do block allocation. Lazily initialize the block
partial--;
}
return err;
-changed:
- while (partial > chain) {
- brelse(partial->bh);
- partial--;
- }
- goto reread;
}
int ext2_get_block(struct inode *inode, sector_t iblock, struct buffer_head *bh_result, int create)
BUG();
return 0;
}
+
+ if (!tree)
+ return 0;
+
if (tree->node_size >= PAGE_CACHE_SIZE) {
nidx = page->index >> (tree->node_size_shift - PAGE_CACHE_SHIFT);
spin_lock(&tree->hash_lock);
if (HFS_SB(sb)->nls_disk)
unload_nls(HFS_SB(sb)->nls_disk);
+ free_pages((unsigned long)HFS_SB(sb)->bitmap, PAGE_SIZE < 8192 ? 1 : 0);
kfree(HFS_SB(sb));
sb->s_fs_info = NULL;
}
* need do nothing.
* RevokeValid set, Revoked set:
* buffer has been revoked.
+ *
+ * Locking rules:
+ * We keep two hash tables of revoke records. One hashtable belongs to the
+ * running transaction (is pointed to by journal->j_revoke), the other one
+ * belongs to the committing transaction. Accesses to the second hash table
+ * happen only from the kjournald and no other thread touches this table. Also
+ * journal_switch_revoke_table() which switches which hashtable belongs to the
+ * running and which to the committing transaction is called only from
+ * kjournald. Therefore we need no locks when accessing the hashtable belonging
+ * to the committing transaction.
+ *
+ * All users operating on the hash table belonging to the running transaction
+ * have a handle to the transaction. Therefore they are safe from kjournald
+ * switching hash tables under them. For operations on the lists of entries in
+ * the hash table j_revoke_lock is used.
+ *
+ * Finally, also replay code uses the hash tables but at this moment noone else
+ * can touch them (filesystem isn't mounted yet) and hence no locking is
+ * needed.
*/
#ifndef __KERNEL__
* the second time we would still have a pending revoke to cancel. So,
* do not trust the Revoked bit on buffers unless RevokeValid is also
* set.
- *
- * The caller must have the journal locked.
*/
int journal_cancel_revoke(handle_t *handle, struct journal_head *jh)
{
/*
* Write revoke records to the journal for all entries in the current
* revoke hash, deleting the entries as we go.
- *
- * Called with the journal lock held.
*/
-
void journal_write_revoke_records(journal_t *journal,
transaction_t *transaction)
{
return mp->m_ddev_targp->bt_bdev;
}
-/*
- * Schedule IO completion handling on a xfsdatad if this was
- * the final hold on this ioend. If we are asked to wait,
- * flush the workqueue.
- */
-STATIC void
-xfs_finish_ioend(
- xfs_ioend_t *ioend,
- int wait)
-{
- if (atomic_dec_and_test(&ioend->io_remaining)) {
- queue_work(xfsdatad_workqueue, &ioend->io_work);
- if (wait)
- flush_workqueue(xfsdatad_workqueue);
- }
-}
-
/*
* We're now finished for good with this ioend structure.
* Update the page state via the associated buffer_heads,
xfs_destroy_ioend(ioend);
}
+/*
+ * Schedule IO completion handling on a xfsdatad if this was
+ * the final hold on this ioend. If we are asked to wait,
+ * flush the workqueue.
+ */
+STATIC void
+xfs_finish_ioend(
+ xfs_ioend_t *ioend,
+ int wait)
+{
+ if (atomic_dec_and_test(&ioend->io_remaining)) {
+ struct workqueue_struct *wq = xfsdatad_workqueue;
+ if (ioend->io_work.func == xfs_end_bio_unwritten)
+ wq = xfsconvertd_workqueue;
+
+ queue_work(wq, &ioend->io_work);
+ if (wait)
+ flush_workqueue(wq);
+ }
+}
+
/*
* Allocate and initialise an IO completion structure.
* We need to track unwritten extent write completion here initially.
#define __XFS_AOPS_H__
extern struct workqueue_struct *xfsdatad_workqueue;
+extern struct workqueue_struct *xfsconvertd_workqueue;
extern mempool_t *xfs_ioend_pool;
/*
static struct workqueue_struct *xfslogd_workqueue;
struct workqueue_struct *xfsdatad_workqueue;
+struct workqueue_struct *xfsconvertd_workqueue;
#ifdef XFS_BUF_TRACE
void
xfs_buf_t *bp, *n;
int pincount = 0;
+ xfs_buf_runall_queues(xfsconvertd_workqueue);
xfs_buf_runall_queues(xfsdatad_workqueue);
xfs_buf_runall_queues(xfslogd_workqueue);
if (!xfsdatad_workqueue)
goto out_destroy_xfslogd_workqueue;
+ xfsconvertd_workqueue = create_workqueue("xfsconvertd");
+ if (!xfsconvertd_workqueue)
+ goto out_destroy_xfsdatad_workqueue;
+
register_shrinker(&xfs_buf_shake);
return 0;
+ out_destroy_xfsdatad_workqueue:
+ destroy_workqueue(xfsdatad_workqueue);
out_destroy_xfslogd_workqueue:
destroy_workqueue(xfslogd_workqueue);
out_free_buf_zone:
xfs_buf_terminate(void)
{
unregister_shrinker(&xfs_buf_shake);
+ destroy_workqueue(xfsconvertd_workqueue);
destroy_workqueue(xfsdatad_workqueue);
destroy_workqueue(xfslogd_workqueue);
kmem_zone_destroy(xfs_buf_zone);
if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
xfs_iflags_clear(ip, XFS_ITRUNCATED);
- ret = filemap_fdatawrite(mapping);
- if (flags & XFS_B_ASYNC)
- return -ret;
- ret2 = filemap_fdatawait(mapping);
- if (!ret)
- ret = ret2;
+ ret = -filemap_fdatawrite(mapping);
}
- return -ret;
+ if (flags & XFS_B_ASYNC)
+ return ret;
+ ret2 = xfs_wait_on_pages(ip, first, last);
+ if (!ret)
+ ret = ret2;
+ return ret;
}
int
goto relock;
}
} else {
+ int enospc = 0;
+ ssize_t ret2 = 0;
+
+write_retry:
xfs_rw_enter_trace(XFS_WRITE_ENTER, xip, (void *)iovp, segs,
*offset, ioflags);
- ret = generic_file_buffered_write(iocb, iovp, segs,
+ ret2 = generic_file_buffered_write(iocb, iovp, segs,
pos, offset, count, ret);
+ /*
+ * if we just got an ENOSPC, flush the inode now we
+ * aren't holding any page locks and retry *once*
+ */
+ if (ret2 == -ENOSPC && !enospc) {
+ error = xfs_flush_pages(xip, 0, -1, 0, FI_NONE);
+ if (error)
+ goto out_unlock_internal;
+ enospc = 1;
+ goto write_retry;
+ }
+ ret = ret2;
}
current->backing_dev_info = NULL;
uint32_t first_index = 0;
int error = 0;
int last_error = 0;
- int fflag = XFS_B_ASYNC;
-
- if (flags & SYNC_DELWRI)
- fflag = XFS_B_DELWRI;
- if (flags & SYNC_WAIT)
- fflag = 0; /* synchronous overrides all */
do {
struct inode *inode;
* If we have to flush data or wait for I/O completion
* we need to hold the iolock.
*/
- if ((flags & SYNC_DELWRI) && VN_DIRTY(inode)) {
- xfs_ilock(ip, XFS_IOLOCK_SHARED);
- lock_flags |= XFS_IOLOCK_SHARED;
- error = xfs_flush_pages(ip, 0, -1, fflag, FI_NONE);
- if (flags & SYNC_IOWAIT)
+ if (flags & SYNC_DELWRI) {
+ if (VN_DIRTY(inode)) {
+ if (flags & SYNC_TRYLOCK) {
+ if (xfs_ilock_nowait(ip, XFS_IOLOCK_SHARED))
+ lock_flags |= XFS_IOLOCK_SHARED;
+ } else {
+ xfs_ilock(ip, XFS_IOLOCK_SHARED);
+ lock_flags |= XFS_IOLOCK_SHARED;
+ }
+ if (lock_flags & XFS_IOLOCK_SHARED) {
+ error = xfs_flush_pages(ip, 0, -1,
+ (flags & SYNC_WAIT) ? 0
+ : XFS_B_ASYNC,
+ FI_NONE);
+ }
+ }
+ if (VN_CACHED(inode) && (flags & SYNC_IOWAIT))
xfs_ioend_wait(ip);
}
xfs_ilock(ip, XFS_ILOCK_SHARED);
xfs_syncd_queue_work(
struct xfs_mount *mp,
void *data,
- void (*syncer)(struct xfs_mount *, void *))
+ void (*syncer)(struct xfs_mount *, void *),
+ struct completion *completion)
{
- struct bhv_vfs_sync_work *work;
+ struct xfs_sync_work *work;
- work = kmem_alloc(sizeof(struct bhv_vfs_sync_work), KM_SLEEP);
+ work = kmem_alloc(sizeof(struct xfs_sync_work), KM_SLEEP);
INIT_LIST_HEAD(&work->w_list);
work->w_syncer = syncer;
work->w_data = data;
work->w_mount = mp;
+ work->w_completion = completion;
spin_lock(&mp->m_sync_lock);
list_add_tail(&work->w_list, &mp->m_sync_list);
spin_unlock(&mp->m_sync_lock);
* heads, looking about for more room...
*/
STATIC void
-xfs_flush_inode_work(
- struct xfs_mount *mp,
- void *arg)
-{
- struct inode *inode = arg;
- filemap_flush(inode->i_mapping);
- iput(inode);
-}
-
-void
-xfs_flush_inode(
- xfs_inode_t *ip)
-{
- struct inode *inode = VFS_I(ip);
-
- igrab(inode);
- xfs_syncd_queue_work(ip->i_mount, inode, xfs_flush_inode_work);
- delay(msecs_to_jiffies(500));
-}
-
-/*
- * This is the "bigger hammer" version of xfs_flush_inode_work...
- * (IOW, "If at first you don't succeed, use a Bigger Hammer").
- */
-STATIC void
-xfs_flush_device_work(
+xfs_flush_inodes_work(
struct xfs_mount *mp,
void *arg)
{
struct inode *inode = arg;
- sync_blockdev(mp->m_super->s_bdev);
+ xfs_sync_inodes(mp, SYNC_DELWRI | SYNC_TRYLOCK);
+ xfs_sync_inodes(mp, SYNC_DELWRI | SYNC_TRYLOCK | SYNC_IOWAIT);
iput(inode);
}
void
-xfs_flush_device(
+xfs_flush_inodes(
xfs_inode_t *ip)
{
struct inode *inode = VFS_I(ip);
+ DECLARE_COMPLETION_ONSTACK(completion);
igrab(inode);
- xfs_syncd_queue_work(ip->i_mount, inode, xfs_flush_device_work);
- delay(msecs_to_jiffies(500));
+ xfs_syncd_queue_work(ip->i_mount, inode, xfs_flush_inodes_work, &completion);
+ wait_for_completion(&completion);
xfs_log_force(ip->i_mount, (xfs_lsn_t)0, XFS_LOG_FORCE|XFS_LOG_SYNC);
}
{
struct xfs_mount *mp = arg;
long timeleft;
- bhv_vfs_sync_work_t *work, *n;
+ xfs_sync_work_t *work, *n;
LIST_HEAD (tmp);
set_freezable();
list_del(&work->w_list);
if (work == &mp->m_sync_work)
continue;
+ if (work->w_completion)
+ complete(work->w_completion);
kmem_free(work);
}
}
{
mp->m_sync_work.w_syncer = xfs_sync_worker;
mp->m_sync_work.w_mount = mp;
+ mp->m_sync_work.w_completion = NULL;
mp->m_sync_task = kthread_run(xfssyncd, mp, "xfssyncd");
if (IS_ERR(mp->m_sync_task))
return -PTR_ERR(mp->m_sync_task);
struct xfs_mount;
struct xfs_perag;
-typedef struct bhv_vfs_sync_work {
+typedef struct xfs_sync_work {
struct list_head w_list;
struct xfs_mount *w_mount;
void *w_data; /* syncer routine argument */
void (*w_syncer)(struct xfs_mount *, void *);
-} bhv_vfs_sync_work_t;
+ struct completion *w_completion;
+} xfs_sync_work_t;
#define SYNC_ATTR 0x0001 /* sync attributes */
#define SYNC_DELWRI 0x0002 /* look at delayed writes */
#define SYNC_WAIT 0x0004 /* wait for i/o to complete */
#define SYNC_BDFLUSH 0x0008 /* BDFLUSH is calling -- don't block */
#define SYNC_IOWAIT 0x0010 /* wait for all I/O to complete */
+#define SYNC_TRYLOCK 0x0020 /* only try to lock inodes */
int xfs_syncd_init(struct xfs_mount *mp);
void xfs_syncd_stop(struct xfs_mount *mp);
int xfs_quiesce_data(struct xfs_mount *mp);
void xfs_quiesce_attr(struct xfs_mount *mp);
-void xfs_flush_inode(struct xfs_inode *ip);
-void xfs_flush_device(struct xfs_inode *ip);
+void xfs_flush_inodes(struct xfs_inode *ip);
int xfs_reclaim_inode(struct xfs_inode *ip, int locked, int sync_mode);
int xfs_reclaim_inodes(struct xfs_mount *mp, int noblock, int mode);
ASSERT(!spin_is_locked(&ip->i_flags_lock));
ASSERT(completion_done(&ip->i_flush));
- /*
- * initialise the VFS inode here to get failures
- * out of the way early.
- */
- if (!inode_init_always(mp->m_super, VFS_I(ip))) {
- kmem_zone_free(xfs_inode_zone, ip);
- return NULL;
- }
-
/* initialise the xfs inode */
ip->i_ino = ino;
ip->i_mount = mp;
#ifdef XFS_DIR2_TRACE
ip->i_dir_trace = ktrace_alloc(XFS_DIR2_KTRACE_SIZE, KM_NOFS);
#endif
+ /*
+ * Now initialise the VFS inode. We do this after the xfs_inode
+ * initialisation as internal failures will result in ->destroy_inode
+ * being called and that will pass down through the reclaim path and
+ * free the XFS inode. This path requires the XFS inode to already be
+ * initialised. Hence if this call fails, the xfs_inode has already
+ * been freed and we should not reference it at all in the error
+ * handling.
+ */
+ if (!inode_init_always(mp->m_super, VFS_I(ip)))
+ return NULL;
+
+ /* prevent anyone from using this yet */
+ VFS_I(ip)->i_state = I_NEW|I_LOCK;
return ip;
}
return 0;
}
-STATIC int
-xfs_flush_space(
- xfs_inode_t *ip,
- int *fsynced,
- int *ioflags)
-{
- switch (*fsynced) {
- case 0:
- if (ip->i_delayed_blks) {
- xfs_iunlock(ip, XFS_ILOCK_EXCL);
- xfs_flush_inode(ip);
- xfs_ilock(ip, XFS_ILOCK_EXCL);
- *fsynced = 1;
- } else {
- *ioflags |= BMAPI_SYNC;
- *fsynced = 2;
- }
- return 0;
- case 1:
- *fsynced = 2;
- *ioflags |= BMAPI_SYNC;
- return 0;
- case 2:
- xfs_iunlock(ip, XFS_ILOCK_EXCL);
- xfs_flush_device(ip);
- xfs_ilock(ip, XFS_ILOCK_EXCL);
- *fsynced = 3;
- return 0;
- }
- return 1;
-}
-
STATIC int
xfs_cmn_err_fsblock_zero(
xfs_inode_t *ip,
}
/*
- * If the caller is doing a write at the end of the file,
- * then extend the allocation out to the file system's write
- * iosize. We clean up any extra space left over when the
- * file is closed in xfs_inactive().
- *
- * For sync writes, we are flushing delayed allocate space to
- * try to make additional space available for allocation near
- * the filesystem full boundary - preallocation hurts in that
- * situation, of course.
+ * If the caller is doing a write at the end of the file, then extend the
+ * allocation out to the file system's write iosize. We clean up any extra
+ * space left over when the file is closed in xfs_inactive().
*/
STATIC int
xfs_iomap_eof_want_preallocate(
int n, error, imaps;
*prealloc = 0;
- if ((ioflag & BMAPI_SYNC) || (offset + count) <= ip->i_size)
+ if ((offset + count) <= ip->i_size)
return 0;
/*
xfs_extlen_t extsz;
int nimaps;
xfs_bmbt_irec_t imap[XFS_WRITE_IMAPS];
- int prealloc, fsynced = 0;
+ int prealloc, flushed = 0;
int error;
ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
extsz = xfs_get_extsz_hint(ip);
offset_fsb = XFS_B_TO_FSBT(mp, offset);
-retry:
error = xfs_iomap_eof_want_preallocate(mp, ip, offset, count,
ioflag, imap, XFS_WRITE_IMAPS, &prealloc);
if (error)
return error;
+retry:
if (prealloc) {
aligned_offset = XFS_WRITEIO_ALIGN(mp, (offset + count - 1));
ioalign = XFS_B_TO_FSBT(mp, aligned_offset);
/*
* If bmapi returned us nothing, and if we didn't get back EDQUOT,
- * then we must have run out of space - flush delalloc, and retry..
+ * then we must have run out of space - flush all other inodes with
+ * delalloc blocks and retry without EOF preallocation.
*/
if (nimaps == 0) {
xfs_iomap_enter_trace(XFS_IOMAP_WRITE_NOSPACE,
ip, offset, count);
- if (xfs_flush_space(ip, &fsynced, &ioflag))
+ if (flushed)
return XFS_ERROR(ENOSPC);
+ xfs_iunlock(ip, XFS_ILOCK_EXCL);
+ xfs_flush_inodes(ip);
+ xfs_ilock(ip, XFS_ILOCK_EXCL);
+
+ flushed = 1;
error = 0;
+ prealloc = 0;
goto retry;
}
BMAPI_IGNSTATE = (1 << 4), /* ignore unwritten state on read */
BMAPI_DIRECT = (1 << 5), /* direct instead of buffered write */
BMAPI_MMAP = (1 << 6), /* allocate for mmap write */
- BMAPI_SYNC = (1 << 7), /* sync write to flush delalloc space */
- BMAPI_TRYLOCK = (1 << 8), /* non-blocking request */
+ BMAPI_TRYLOCK = (1 << 7), /* non-blocking request */
} bmapi_flags_t;
}
mp->m_log = xlog_alloc_log(mp, log_target, blk_offset, num_bblks);
- if (!mp->m_log) {
- cmn_err(CE_WARN, "XFS: Log allocation failed: No memory!");
- error = ENOMEM;
+ if (IS_ERR(mp->m_log)) {
+ error = -PTR_ERR(mp->m_log);
goto out;
}
xfs_buf_t *bp;
int i;
int iclogsize;
+ int error = ENOMEM;
log = kmem_zalloc(sizeof(xlog_t), KM_MAYFAIL);
- if (!log)
- return NULL;
+ if (!log) {
+ xlog_warn("XFS: Log allocation failed: No memory!");
+ goto out;
+ }
log->l_mp = mp;
log->l_targ = log_target;
log->l_grant_reserve_cycle = 1;
log->l_grant_write_cycle = 1;
+ error = EFSCORRUPTED;
if (xfs_sb_version_hassector(&mp->m_sb)) {
log->l_sectbb_log = mp->m_sb.sb_logsectlog - BBSHIFT;
- ASSERT(log->l_sectbb_log <= mp->m_sectbb_log);
+ if (log->l_sectbb_log < 0 ||
+ log->l_sectbb_log > mp->m_sectbb_log) {
+ xlog_warn("XFS: Log sector size (0x%x) out of range.",
+ log->l_sectbb_log);
+ goto out_free_log;
+ }
+
/* for larger sector sizes, must have v2 or external log */
- ASSERT(log->l_sectbb_log == 0 ||
- log->l_logBBstart == 0 ||
- xfs_sb_version_haslogv2(&mp->m_sb));
- ASSERT(mp->m_sb.sb_logsectlog >= BBSHIFT);
+ if (log->l_sectbb_log != 0 &&
+ (log->l_logBBstart != 0 &&
+ !xfs_sb_version_haslogv2(&mp->m_sb))) {
+ xlog_warn("XFS: log sector size (0x%x) invalid "
+ "for configuration.", log->l_sectbb_log);
+ goto out_free_log;
+ }
+ if (mp->m_sb.sb_logsectlog < BBSHIFT) {
+ xlog_warn("XFS: Log sector log (0x%x) too small.",
+ mp->m_sb.sb_logsectlog);
+ goto out_free_log;
+ }
}
log->l_sectbb_mask = (1 << log->l_sectbb_log) - 1;
xlog_get_iclog_buffer_size(mp, log);
+ error = ENOMEM;
bp = xfs_buf_get_empty(log->l_iclog_size, mp->m_logdev_targp);
if (!bp)
goto out_free_log;
xfs_buf_free(log->l_xbuf);
out_free_log:
kmem_free(log);
- return NULL;
+out:
+ return ERR_PTR(-error);
} /* xlog_alloc_log */
xlog_ins_ticketq(&log->l_reserve_headq, tic);
xlog_trace_loggrant(log, tic,
"xlog_grant_log_space: sleep 2");
+ spin_unlock(&log->l_grant_lock);
+ xlog_grant_push_ail(log->l_mp, need_bytes);
+ spin_lock(&log->l_grant_lock);
+
XFS_STATS_INC(xs_sleep_logspace);
sv_wait(&tic->t_wait, PINOD|PLTWAIT, &log->l_grant_lock, s);
- if (XLOG_FORCED_SHUTDOWN(log)) {
- spin_lock(&log->l_grant_lock);
+ spin_lock(&log->l_grant_lock);
+ if (XLOG_FORCED_SHUTDOWN(log))
goto error_return;
- }
xlog_trace_loggrant(log, tic,
"xlog_grant_log_space: wake 2");
- xlog_grant_push_ail(log->l_mp, need_bytes);
- spin_lock(&log->l_grant_lock);
goto redo;
} else if (tic->t_flags & XLOG_TIC_IN_Q)
xlog_del_ticketq(&log->l_reserve_headq, tic);
* for more free space, otherwise try to get some space for
* this transaction.
*/
-
+ need_bytes = tic->t_unit_res;
if ((ntic = log->l_write_headq)) {
free_bytes = xlog_space_left(log, log->l_grant_write_cycle,
log->l_grant_write_bytes);
xlog_trace_loggrant(log, tic,
"xlog_regrant_write_log_space: sleep 1");
+ spin_unlock(&log->l_grant_lock);
+ xlog_grant_push_ail(log->l_mp, need_bytes);
+ spin_lock(&log->l_grant_lock);
+
XFS_STATS_INC(xs_sleep_logspace);
sv_wait(&tic->t_wait, PINOD|PLTWAIT,
&log->l_grant_lock, s);
/* If we're shutting down, this tic is already
* off the queue */
- if (XLOG_FORCED_SHUTDOWN(log)) {
- spin_lock(&log->l_grant_lock);
+ spin_lock(&log->l_grant_lock);
+ if (XLOG_FORCED_SHUTDOWN(log))
goto error_return;
- }
xlog_trace_loggrant(log, tic,
"xlog_regrant_write_log_space: wake 1");
- xlog_grant_push_ail(log->l_mp, tic->t_unit_res);
- spin_lock(&log->l_grant_lock);
}
}
- need_bytes = tic->t_unit_res;
-
redo:
if (XLOG_FORCED_SHUTDOWN(log))
goto error_return;
if (free_bytes < need_bytes) {
if ((tic->t_flags & XLOG_TIC_IN_Q) == 0)
xlog_ins_ticketq(&log->l_write_headq, tic);
+ spin_unlock(&log->l_grant_lock);
+ xlog_grant_push_ail(log->l_mp, need_bytes);
+ spin_lock(&log->l_grant_lock);
+
XFS_STATS_INC(xs_sleep_logspace);
sv_wait(&tic->t_wait, PINOD|PLTWAIT, &log->l_grant_lock, s);
/* If we're shutting down, this tic is already off the queue */
- if (XLOG_FORCED_SHUTDOWN(log)) {
- spin_lock(&log->l_grant_lock);
+ spin_lock(&log->l_grant_lock);
+ if (XLOG_FORCED_SHUTDOWN(log))
goto error_return;
- }
xlog_trace_loggrant(log, tic,
"xlog_regrant_write_log_space: wake 2");
- xlog_grant_push_ail(log->l_mp, need_bytes);
- spin_lock(&log->l_grant_lock);
goto redo;
} else if (tic->t_flags & XLOG_TIC_IN_Q)
xlog_del_ticketq(&log->l_write_headq, tic);
#endif
struct xfs_mru_cache *m_filestream; /* per-mount filestream data */
struct task_struct *m_sync_task; /* generalised sync thread */
- bhv_vfs_sync_work_t m_sync_work; /* work item for VFS_SYNC */
+ xfs_sync_work_t m_sync_work; /* work item for VFS_SYNC */
struct list_head m_sync_list; /* sync thread work item list */
spinlock_t m_sync_lock; /* work item list lock */
int m_sync_seq; /* sync thread generation no. */
error = xfs_trans_reserve(tp, resblks, log_res, 0,
XFS_TRANS_PERM_LOG_RES, log_count);
if (error == ENOSPC) {
+ /* flush outstanding delalloc blocks and retry */
+ xfs_flush_inodes(dp);
+ error = xfs_trans_reserve(tp, resblks, XFS_CREATE_LOG_RES(mp), 0,
+ XFS_TRANS_PERM_LOG_RES, XFS_CREATE_LOG_COUNT);
+ }
+ if (error == ENOSPC) {
+ /* No space at all so try a "no-allocation" reservation */
resblks = 0;
error = xfs_trans_reserve(tp, 0, log_res, 0,
XFS_TRANS_PERM_LOG_RES, log_count);
#define TRAP_TRACE (__SI_FAULT|2) /* process trace trap */
#define TRAP_BRANCH (__SI_FAULT|3) /* process taken branch trap */
#define TRAP_HWBKPT (__SI_FAULT|4) /* hardware breakpoint/watchpoint */
-#define NSIGTRAP 2
+#define NSIGTRAP 4
/*
* SIGCHLD si_codes
{0x8086, 0x2562, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0x8086, 0x3582, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0x8086, 0x2572, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x358e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0, 0, 0}
#define gamma_PCI_IDS \
{0x8086, 0x2e22, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
{0x8086, 0xa001, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
{0x8086, 0xa011, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+ {0x8086, 0x35e8, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
{0, 0, 0}
/* Interpretation of offset for color fields: All offsets are from the right,
* inside a "pixel" value, which is exactly 'bits_per_pixel' wide (means: you
* can use the offset as right argument to <<). A pixel afterwards is a bit
- * stream and is written to video memory as that unmodified. This implies
- * big-endian byte order if bits_per_pixel is greater than 8.
+ * stream and is written to video memory as that unmodified.
+ *
+ * For pseudocolor: offset and length should be the same for all color
+ * components. Offset specifies the position of the least significant bit
+ * of the pallette index in a pixel value. Length indicates the number
+ * of available palette entries (i.e. # of entries = 1 << length).
*/
struct fb_bitfield {
__u32 offset; /* beginning of bitfield */
#ifndef _LINUX_FIEMAP_H
#define _LINUX_FIEMAP_H
+#include <linux/types.h>
+
struct fiemap_extent {
__u64 fe_logical; /* logical offset in bytes for the start of
* the extent from the beginning of the file */
extern struct files_struct init_files;
extern struct fs_struct init_fs;
-#define INIT_KIOCTX(name, which_mm) \
-{ \
- .users = ATOMIC_INIT(1), \
- .dead = 0, \
- .mm = &which_mm, \
- .user_id = 0, \
- .next = NULL, \
- .wait = __WAIT_QUEUE_HEAD_INITIALIZER(name.wait), \
- .ctx_lock = __SPIN_LOCK_UNLOCKED(name.ctx_lock), \
- .reqs_active = 0U, \
- .max_reqs = ~0U, \
-}
-
#define INIT_MM(name) \
{ \
.mm_rb = RB_ROOT, \
#define PCI_DEVICE_ID_INTEL_IOAT_TBG3 0x3433
#define PCI_DEVICE_ID_INTEL_82830_HB 0x3575
#define PCI_DEVICE_ID_INTEL_82830_CGC 0x3577
+#define PCI_DEVICE_ID_INTEL_82854_HB 0x358c
+#define PCI_DEVICE_ID_INTEL_82854_IG 0x358e
#define PCI_DEVICE_ID_INTEL_82855GM_HB 0x3580
#define PCI_DEVICE_ID_INTEL_82855GM_IG 0x3582
#define PCI_DEVICE_ID_INTEL_E7520_MCH 0x3590
--- /dev/null
+/*
+ * sht15.h - support for the SHT15 Temperature and Humidity Sensor
+ *
+ * Copyright (c) 2009 Jonathan Cameron
+ *
+ * Copyright (c) 2007 Wouter Horre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/**
+ * struct sht15_platform_data - sht15 connectivity info
+ * @gpio_data: no. of gpio to which bidirectional data line is connected
+ * @gpio_sck: no. of gpio to which the data clock is connected.
+ * @supply_mv: supply voltage in mv. Overridden by regulator if available.
+ **/
+struct sht15_platform_data {
+ int gpio_data;
+ int gpio_sck;
+ int supply_mv;
+};
+
/**
* usb_serial_port: structure for the specific ports of a device.
* @serial: pointer back to the struct usb_serial owner of this port.
- * @tty: pointer to the corresponding tty for this port.
+ * @port: pointer to the corresponding tty_port for this port.
* @lock: spinlock to grab when updating portions of this structure.
* @mutex: mutex used to synchronize serial_open() and serial_close()
* access for this port.
* @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe
* for this port.
* @bulk_in_buffer: pointer to the bulk in buffer for this port.
+ * @bulk_in_size: the size of the bulk_in_buffer, in bytes.
* @read_urb: pointer to the bulk in struct urb for this port.
* @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this
* port.
* @bulk_out_buffer: pointer to the bulk out buffer for this port.
* @bulk_out_size: the size of the bulk_out_buffer, in bytes.
* @write_urb: pointer to the bulk out struct urb for this port.
+ * @write_urb_busy: port`s writing status
* @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this
* port.
* @write_wait: a wait_queue_head_t used by the port.
* @work: work queue entry for the line discipline waking up.
- * @open_count: number of times this port has been opened.
* @throttled: nonzero if the read urb is inactive to throttle the device
* @throttle_req: nonzero if the tty wants to throttle us
+ * @console: attached usb serial console
+ * @dev: pointer to the serial device
*
* This structure is used by the usb-serial core and drivers for the specific
* ports of a device.
+++ /dev/null
-
-#ifndef CYBLAFB_DEBUG
-#define CYBLAFB_DEBUG 0
-#endif
-
-#if CYBLAFB_DEBUG
-#define debug(f,a...) printk("%s:" f, __func__ , ## a);
-#else
-#define debug(f,a...)
-#endif
-
-#define output(f, a...) printk("cyblafb: " f, ## a)
-
-#define Kb (1024)
-#define Mb (Kb*Kb)
-
-/* PCI IDS of supported cards temporarily here */
-
-#define CYBERBLADEi1 0x8500
-
-/* these defines are for 'lcd' variable */
-#define LCD_STRETCH 0
-#define LCD_CENTER 1
-#define LCD_BIOS 2
-
-/* display types */
-#define DISPLAY_CRT 0
-#define DISPLAY_FP 1
-
-#define ROP_S 0xCC
-
-#define point(x,y) ((y)<<16|(x))
-
-//
-// Attribute Regs, ARxx, 3c0/3c1
-//
-#define AR00 0x00
-#define AR01 0x01
-#define AR02 0x02
-#define AR03 0x03
-#define AR04 0x04
-#define AR05 0x05
-#define AR06 0x06
-#define AR07 0x07
-#define AR08 0x08
-#define AR09 0x09
-#define AR0A 0x0A
-#define AR0B 0x0B
-#define AR0C 0x0C
-#define AR0D 0x0D
-#define AR0E 0x0E
-#define AR0F 0x0F
-#define AR10 0x10
-#define AR12 0x12
-#define AR13 0x13
-
-//
-// Sequencer Regs, SRxx, 3c4/3c5
-//
-#define SR00 0x00
-#define SR01 0x01
-#define SR02 0x02
-#define SR03 0x03
-#define SR04 0x04
-#define SR0D 0x0D
-#define SR0E 0x0E
-#define SR11 0x11
-#define SR18 0x18
-#define SR19 0x19
-
-//
-//
-//
-#define CR00 0x00
-#define CR01 0x01
-#define CR02 0x02
-#define CR03 0x03
-#define CR04 0x04
-#define CR05 0x05
-#define CR06 0x06
-#define CR07 0x07
-#define CR08 0x08
-#define CR09 0x09
-#define CR0A 0x0A
-#define CR0B 0x0B
-#define CR0C 0x0C
-#define CR0D 0x0D
-#define CR0E 0x0E
-#define CR0F 0x0F
-#define CR10 0x10
-#define CR11 0x11
-#define CR12 0x12
-#define CR13 0x13
-#define CR14 0x14
-#define CR15 0x15
-#define CR16 0x16
-#define CR17 0x17
-#define CR18 0x18
-#define CR19 0x19
-#define CR1A 0x1A
-#define CR1B 0x1B
-#define CR1C 0x1C
-#define CR1D 0x1D
-#define CR1E 0x1E
-#define CR1F 0x1F
-#define CR20 0x20
-#define CR21 0x21
-#define CR27 0x27
-#define CR29 0x29
-#define CR2A 0x2A
-#define CR2B 0x2B
-#define CR2D 0x2D
-#define CR2F 0x2F
-#define CR36 0x36
-#define CR38 0x38
-#define CR39 0x39
-#define CR3A 0x3A
-#define CR55 0x55
-#define CR56 0x56
-#define CR57 0x57
-#define CR58 0x58
-
-//
-//
-//
-
-#define GR00 0x01
-#define GR01 0x01
-#define GR02 0x02
-#define GR03 0x03
-#define GR04 0x04
-#define GR05 0x05
-#define GR06 0x06
-#define GR07 0x07
-#define GR08 0x08
-#define GR0F 0x0F
-#define GR20 0x20
-#define GR23 0x23
-#define GR2F 0x2F
-#define GR30 0x30
-#define GR31 0x31
-#define GR33 0x33
-#define GR52 0x52
-#define GR53 0x53
-#define GR5D 0x5d
-
-
-//
-// Graphics Engine
-//
-#define GEBase 0x2100 // could be mapped elsewhere if we like it
-#define GE00 (GEBase+0x00) // source 1, p 111
-#define GE04 (GEBase+0x04) // source 2, p 111
-#define GE08 (GEBase+0x08) // destination 1, p 111
-#define GE0C (GEBase+0x0C) // destination 2, p 112
-#define GE10 (GEBase+0x10) // right view base & enable, p 112
-#define GE13 (GEBase+0x13) // left view base & enable, p 112
-#define GE18 (GEBase+0x18) // block write start address, p 112
-#define GE1C (GEBase+0x1C) // block write end address, p 112
-#define GE20 (GEBase+0x20) // engine status, p 113
-#define GE24 (GEBase+0x24) // reset all GE pointers
-#define GE44 (GEBase+0x44) // command register, p 126
-#define GE48 (GEBase+0x48) // raster operation, p 127
-#define GE60 (GEBase+0x60) // foreground color, p 128
-#define GE64 (GEBase+0x64) // background color, p 128
-#define GE6C (GEBase+0x6C) // Pattern and Style, p 129, ok
-#define GE9C (GEBase+0x9C) // pixel engine data port, p 125
-#define GEB8 (GEBase+0xB8) // Destination Stride / Buffer Base 0, p 133
-#define GEBC (GEBase+0xBC) // Destination Stride / Buffer Base 1, p 133
-#define GEC0 (GEBase+0xC0) // Destination Stride / Buffer Base 2, p 133
-#define GEC4 (GEBase+0xC4) // Destination Stride / Buffer Base 3, p 133
-#define GEC8 (GEBase+0xC8) // Source Stride / Buffer Base 0, p 133
-#define GECC (GEBase+0xCC) // Source Stride / Buffer Base 1, p 133
-#define GED0 (GEBase+0xD0) // Source Stride / Buffer Base 2, p 133
-#define GED4 (GEBase+0xD4) // Source Stride / Buffer Base 3, p 133
if (wfd >= 0) {
sys_fchown(wfd, uid, gid);
sys_fchmod(wfd, mode);
- sys_ftruncate(wfd, body_len);
+ if (body_len)
+ sys_ftruncate(wfd, body_len);
vcollected = kstrdup(collected, GFP_KERNEL);
state = CopyFile;
}
initrd_end = 0;
}
+#ifdef CONFIG_BLK_DEV_RAM
#define BUF_SIZE 1024
static void __init clean_rootfs(void)
{
sys_close(fd);
kfree(buf);
}
+#endif
static int __init populate_rootfs(void)
{
#define MIN_MSGSIZEMAX 128 /* min value for msgsize_max */
#define MAX_MSGSIZEMAX (8192*128) /* max value for msgsize_max */
+#ifdef CONFIG_PROC_SYSCTL
static void *get_mq(ctl_table *table)
{
char *which = table->data;
return which;
}
-#ifdef CONFIG_PROC_SYSCTL
static int proc_mq_dointvec(ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
ret = security_ptrace_traceme(current->parent);
/*
- * Set the ptrace bit in the process ptrace flags.
- * Then link us on our parent's ptraced list.
+ * Check PF_EXITING to ensure ->real_parent has not passed
+ * exit_ptrace(). Otherwise we don't report the error but
+ * pretend ->real_parent untraces us right after return.
*/
- if (!ret) {
+ if (!ret && !(current->real_parent->flags & PF_EXITING)) {
current->ptrace |= PT_PTRACED;
__ptrace_link(current, current->real_parent);
}
void __user *, arg)
{
char buffer[256];
+ int ret = 0;
/* We only trust the superuser with rebooting the system. */
if (!capable(CAP_SYS_BOOT))
kernel_halt();
unlock_kernel();
do_exit(0);
- break;
+ panic("cannot halt");
case LINUX_REBOOT_CMD_POWER_OFF:
kernel_power_off();
#ifdef CONFIG_KEXEC
case LINUX_REBOOT_CMD_KEXEC:
- {
- int ret;
- ret = kernel_kexec();
- unlock_kernel();
- return ret;
- }
+ ret = kernel_kexec();
+ break;
#endif
#ifdef CONFIG_HIBERNATION
case LINUX_REBOOT_CMD_SW_SUSPEND:
- {
- int ret = hibernate();
- unlock_kernel();
- return ret;
- }
+ ret = hibernate();
+ break;
#endif
default:
- unlock_kernel();
- return -EINVAL;
+ ret = -EINVAL;
+ break;
}
unlock_kernel();
- return 0;
+ return ret;
}
static void deferred_cad(struct work_struct *dummy)
.proc_handler = &proc_dointvec,
},
#endif
-#ifdef CONFIG_UNEVICTABLE_LRU
- {
- .ctl_name = CTL_UNNUMBERED,
- .procname = "scan_unevictable_pages",
- .data = &scan_unevictable_pages,
- .maxlen = sizeof(scan_unevictable_pages),
- .mode = 0644,
- .proc_handler = &scan_unevictable_handler,
- },
-#endif
#ifdef CONFIG_SLOW_WORK
{
.ctl_name = CTL_UNNUMBERED,
.extra2 = &one,
},
#endif
+#ifdef CONFIG_UNEVICTABLE_LRU
+ {
+ .ctl_name = CTL_UNNUMBERED,
+ .procname = "scan_unevictable_pages",
+ .data = &scan_unevictable_pages,
+ .maxlen = sizeof(scan_unevictable_pages),
+ .mode = 0644,
+ .proc_handler = &scan_unevictable_handler,
+ },
+#endif
/*
* NOTE: do not add new entries to this table unless you have read
* Documentation/sysctl/ctl_unnumbered.txt
will use one page flag and increase the code size a little,
say Y unless you know what you are doing.
+ See Documentation/vm/unevictable-lru.txt for more information.
+
config HAVE_MLOCK
bool
default y if MMU=y
/**
* add_page_wait_queue - Add an arbitrary waiter to a page's wait queue
- * @page - Page defining the wait queue of interest
- * @waiter - Waiter to add to the queue
+ * @page: Page defining the wait queue of interest
+ * @waiter: Waiter to add to the queue
*
* Add an arbitrary @waiter to the wait queue for the nominated @page.
*/
if (unlikely(!mem))
return 0;
- VM_BUG_ON(mem_cgroup_is_obsolete(mem));
+ VM_BUG_ON(!mem || mem_cgroup_is_obsolete(mem));
while (1) {
int ret;
#include <linux/init.h>
#include <linux/vfs.h>
#include <linux/mount.h>
+#include <linux/pagemap.h>
#include <linux/file.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/exportfs.h>
#include <linux/generic_acl.h>
#include <linux/mman.h>
-#include <linux/pagemap.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/backing-dev.h>
#include <asm/div64.h>
#include <asm/pgtable.h>
+/*
+ * The maximum size of a shmem/tmpfs file is limited by the maximum size of
+ * its triple-indirect swap vector - see illustration at shmem_swp_entry().
+ *
+ * With 4kB page size, maximum file size is just over 2TB on a 32-bit kernel,
+ * but one eighth of that on a 64-bit kernel. With 8kB page size, maximum
+ * file size is just over 4TB on a 64-bit kernel, but 16TB on a 32-bit kernel,
+ * MAX_LFS_FILESIZE being then more restrictive than swap vector layout.
+ *
+ * We use / and * instead of shifts in the definitions below, so that the swap
+ * vector can be tested with small even values (e.g. 20) for ENTRIES_PER_PAGE.
+ */
#define ENTRIES_PER_PAGE (PAGE_CACHE_SIZE/sizeof(unsigned long))
-#define ENTRIES_PER_PAGEPAGE (ENTRIES_PER_PAGE*ENTRIES_PER_PAGE)
-#define BLOCKS_PER_PAGE (PAGE_CACHE_SIZE/512)
+#define ENTRIES_PER_PAGEPAGE ((unsigned long long)ENTRIES_PER_PAGE*ENTRIES_PER_PAGE)
-#define SHMEM_MAX_INDEX (SHMEM_NR_DIRECT + (ENTRIES_PER_PAGEPAGE/2) * (ENTRIES_PER_PAGE+1))
-#define SHMEM_MAX_BYTES ((unsigned long long)SHMEM_MAX_INDEX << PAGE_CACHE_SHIFT)
+#define SHMSWP_MAX_INDEX (SHMEM_NR_DIRECT + (ENTRIES_PER_PAGEPAGE/2) * (ENTRIES_PER_PAGE+1))
+#define SHMSWP_MAX_BYTES (SHMSWP_MAX_INDEX << PAGE_CACHE_SHIFT)
+#define SHMEM_MAX_BYTES min_t(unsigned long long, SHMSWP_MAX_BYTES, MAX_LFS_FILESIZE)
+#define SHMEM_MAX_INDEX ((unsigned long)((SHMEM_MAX_BYTES+1) >> PAGE_CACHE_SHIFT))
+
+#define BLOCKS_PER_PAGE (PAGE_CACHE_SIZE/512)
#define VM_ACCT(size) (PAGE_CACHE_ALIGN(size) >> PAGE_SHIFT)
/* info->flags needs VM_flags to handle pagein/truncate races efficiently */
#define shmem_get_inode(sb, mode, dev, flags) ramfs_get_inode(sb, mode, dev)
#define shmem_acct_size(flags, size) 0
#define shmem_unacct_size(flags, size) do {} while (0)
-#define SHMEM_MAX_BYTES LLONG_MAX
+#define SHMEM_MAX_BYTES MAX_LFS_FILESIZE
#endif /* CONFIG_SHMEM */
}
#endif
+/**
+ * get_user_pages_fast() - pin user pages in memory
+ * @start: starting user address
+ * @nr_pages: number of pages from start to pin
+ * @write: whether pages will be written to
+ * @pages: array that receives pointers to the pages pinned.
+ * Should be at least nr_pages long.
+ *
+ * Attempt to pin user pages in memory without taking mm->mmap_sem.
+ * If not successful, it will fall back to taking the lock and
+ * calling get_user_pages().
+ *
+ * Returns number of pages pinned. This may be fewer than the number
+ * requested. If nr_pages is 0 or negative, returns 0. If no pages
+ * were pinned, returns -errno.
+ */
int __attribute__((weak)) get_user_pages_fast(unsigned long start,
int nr_pages, int write, struct page **pages)
{
*
* Copyright (C) 2005-2009 NTT DATA CORPORATION
*
- * Version: 2.2.0-pre 2009/02/01
+ * Version: 2.2.0 2009/04/01
*
*/
envp[2] = NULL;
call_usermodehelper(argv[0], argv, envp, 1);
- printk(KERN_INFO "TOMOYO: 2.2.0-pre 2009/02/01\n");
+ printk(KERN_INFO "TOMOYO: 2.2.0 2009/04/01\n");
printk(KERN_INFO "Mandatory Access Control activated.\n");
tomoyo_policy_loaded = true;
{ /* Check all profiles currently assigned to domains are defined. */
static int tomoyo_read_version(struct tomoyo_io_buffer *head)
{
if (!head->read_eof) {
- tomoyo_io_printf(head, "2.2.0-pre");
+ tomoyo_io_printf(head, "2.2.0");
head->read_eof = true;
}
return 0;
*
* Copyright (C) 2005-2009 NTT DATA CORPORATION
*
- * Version: 2.2.0-pre 2009/02/01
+ * Version: 2.2.0 2009/04/01
*
*/
*
* Copyright (C) 2005-2009 NTT DATA CORPORATION
*
- * Version: 2.2.0-pre 2009/02/01
+ * Version: 2.2.0 2009/04/01
*
*/
*
* Copyright (C) 2005-2009 NTT DATA CORPORATION
*
- * Version: 2.2.0-pre 2009/02/01
+ * Version: 2.2.0 2009/04/01
*
*/
*
* Copyright (C) 2005-2009 NTT DATA CORPORATION
*
- * Version: 2.2.0-pre 2009/02/01
+ * Version: 2.2.0 2009/04/01
*
*/
*
* Copyright (C) 2005-2009 NTT DATA CORPORATION
*
- * Version: 2.2.0-pre 2009/02/01
+ * Version: 2.2.0 2009/04/01
*
*/
*
* Copyright (C) 2005-2009 NTT DATA CORPORATION
*
- * Version: 2.2.0-pre 2009/02/01
+ * Version: 2.2.0 2009/04/01
*
*/
*
* Copyright (C) 2005-2009 NTT DATA CORPORATION
*
- * Version: 2.2.0-pre 2009/02/01
+ * Version: 2.2.0 2009/04/01
*
*/
gcap &= ~0x01;
/* allow 64bit DMA address if supported by H/W */
- if ((gcap & 0x01) && !pci_set_dma_mask(pci, DMA_64BIT_MASK))
- pci_set_consistent_dma_mask(pci, DMA_64BIT_MASK);
+ if ((gcap & 0x01) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64)))
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(64));
else {
- pci_set_dma_mask(pci, DMA_32BIT_MASK);
- pci_set_consistent_dma_mask(pci, DMA_32BIT_MASK);
+ pci_set_dma_mask(pci, DMA_BIT_MASK(32));
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(32));
}
/* read number of streams from GCAP register instead of using
git.samba.org / sfrench / cifs-2.6.git / commitdiff