Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/aoe-2.6
authorLinus Torvalds <torvalds@g5.osdl.org>
Sat, 25 Mar 2006 17:20:39 +0000 (09:20 -0800)
committerLinus Torvalds <torvalds@g5.osdl.org>
Sat, 25 Mar 2006 17:20:39 +0000 (09:20 -0800)
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/aoe-2.6:
  [PATCH] aoe [3/3]: update version to 22
  [PATCH] aoe [2/3]: don't request ATA device ID on ATA error
  [PATCH] aoe [1/3]: support multiple AoE listeners
  [PATCH] aoe: do not stop retransmit timer when device goes down
  [PATCH] aoe [8/8]: update driver version number
  [PATCH] aoe [7/8]: update driver compatibility string
  [PATCH] aoe [6/8]: update device information on last close
  [PATCH] aoe [5/8]: allow network interface migration on packet retransmit
  [PATCH] aoe [4/8]: use less confusing driver name
  [PATCH] aoe [3/8]: increase allowed outstanding packets
  [PATCH] aoe [2/8]: support dynamic resizing of AoE devices
  [PATCH] aoe [1/8]: zero packet data after skb allocation

1124 files changed:
CREDITS
Documentation/DocBook/Makefile
Documentation/DocBook/deviceiobook.tmpl
Documentation/RCU/whatisRCU.txt
Documentation/arm/Booting
Documentation/arm/README
Documentation/arm/Setup
Documentation/cpusets.txt
Documentation/feature-removal-schedule.txt
Documentation/filesystems/9p.txt [moved from Documentation/filesystems/v9fs.txt with 82% similarity]
Documentation/filesystems/proc.txt
Documentation/filesystems/udf.txt
Documentation/filesystems/vfs.txt
Documentation/firmware_class/firmware_sample_driver.c
Documentation/firmware_class/firmware_sample_firmware_class.c
Documentation/kbuild/makefiles.txt
Documentation/kbuild/modules.txt
Documentation/kernel-parameters.txt
Documentation/networking/packet_mmap.txt
Documentation/networking/ray_cs.txt
Documentation/nfsroot.txt
Documentation/s390/driver-model.txt
Documentation/serial-console.txt
Documentation/smart-config.txt
Documentation/sound/oss/Introduction
Documentation/sound/oss/cs46xx
Documentation/video4linux/CQcam.txt
Documentation/video4linux/README.cpia
Documentation/video4linux/Zoran
Documentation/video4linux/bttv/ICs
Documentation/video4linux/bttv/PROBLEMS
Documentation/video4linux/bttv/README.quirks
Documentation/video4linux/bttv/THANKS
Documentation/video4linux/radiotrack.txt
Documentation/video4linux/w9966.txt
Documentation/video4linux/zr36120.txt
Documentation/w1/masters/ds2482 [new file with mode: 0644]
MAINTAINERS
Makefile
arch/arm/Makefile
arch/arm/boot/Makefile
arch/arm/boot/bootp/Makefile
arch/arm/mach-pxa/leds-mainstone.c
arch/arm/mach-s3c2410/cpu.c
arch/arm/mach-sa1100/collie.c
arch/arm26/Makefile
arch/arm26/boot/Makefile
arch/cris/arch-v32/drivers/cryptocop.c
arch/cris/kernel/process.c
arch/frv/kernel/gdb-stub.c
arch/h8300/kernel/process.c
arch/i386/Kconfig
arch/i386/Kconfig.debug
arch/i386/Makefile
arch/i386/Makefile.cpu
arch/i386/boot/edd.S
arch/i386/kernel/apm.c
arch/i386/kernel/cpu/cpufreq/Kconfig
arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c
arch/i386/kernel/cpu/cpufreq/elanfreq.c
arch/i386/kernel/cpu/cpufreq/gx-suspmod.c
arch/i386/kernel/cpu/cpufreq/longhaul.h
arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
arch/i386/kernel/cpu/cpufreq/powernow-k6.c
arch/i386/kernel/cpu/cpufreq/powernow-k7.c
arch/i386/kernel/cpu/cpufreq/powernow-k8.c
arch/i386/kernel/cpu/cpufreq/powernow-k8.h
arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
arch/i386/kernel/cpu/cpufreq/speedstep-lib.c
arch/i386/kernel/cpu/cpufreq/speedstep-lib.h
arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
arch/i386/kernel/cpu/proc.c
arch/i386/kernel/dmi_scan.c
arch/i386/kernel/microcode.c
arch/i386/kernel/smpboot.c
arch/i386/kernel/vmlinux.lds.S
arch/i386/mach-visws/reboot.c
arch/ia64/Kconfig
arch/ia64/Makefile
arch/ia64/configs/gensparse_defconfig
arch/ia64/configs/sn2_defconfig
arch/ia64/defconfig
arch/ia64/dig/setup.c
arch/ia64/ia32/sys_ia32.c
arch/ia64/kernel/acpi.c
arch/ia64/kernel/ivt.S
arch/ia64/kernel/machvec.c
arch/ia64/kernel/mca.c
arch/ia64/kernel/mca_drv.c
arch/ia64/kernel/mca_drv.h
arch/ia64/kernel/mca_drv_asm.S
arch/ia64/kernel/numa.c
arch/ia64/kernel/patch.c
arch/ia64/kernel/setup.c
arch/ia64/kernel/smpboot.c
arch/ia64/kernel/vmlinux.lds.S
arch/ia64/mm/contig.c
arch/ia64/mm/discontig.c
arch/ia64/mm/hugetlbpage.c
arch/ia64/mm/init.c
arch/ia64/sn/kernel/bte.c
arch/ia64/sn/kernel/io_init.c
arch/ia64/sn/kernel/irq.c
arch/ia64/sn/kernel/tiocx.c
arch/ia64/sn/pci/pcibr/pcibr_provider.c
arch/ia64/sn/pci/tioca_provider.c
arch/m32r/Kconfig.debug
arch/m32r/Makefile
arch/m68k/kernel/process.c
arch/m68knommu/kernel/process.c
arch/mips/kernel/sysirix.c
arch/mips/mm/dma-ip32.c
arch/parisc/kernel/process.c
arch/powerpc/Makefile
arch/ppc/8xx_io/cs4218_tdm.c
arch/ppc/Makefile
arch/ppc/boot/Makefile
arch/ppc/boot/openfirmware/Makefile
arch/ppc/syslib/ppc85xx_setup.c
arch/s390/Kconfig
arch/s390/appldata/appldata_base.c
arch/s390/kernel/debug.c
arch/s390/kernel/process.c
arch/s390/kernel/setup.c
arch/s390/kernel/smp.c
arch/s390/mm/cmm.c
arch/sh/Makefile
arch/sh/kernel/process.c
arch/sparc/Kconfig
arch/sparc/kernel/irq.c
arch/sparc/kernel/smp.c
arch/sparc/kernel/sparc_ksyms.c
arch/sparc/kernel/sun4d_irq.c
arch/sparc/kernel/sun4d_smp.c
arch/sparc/kernel/sun4m_smp.c
arch/sparc/mm/srmmu.c
arch/sparc64/Kconfig.debug
arch/sparc64/kernel/irq.c
arch/um/Makefile
arch/v850/kernel/process.c
arch/x86_64/Kconfig
arch/x86_64/Makefile
arch/x86_64/defconfig
arch/x86_64/ia32/ia32_binfmt.c
arch/x86_64/ia32/sys_ia32.c
arch/x86_64/kernel/aperture.c
arch/x86_64/kernel/apic.c
arch/x86_64/kernel/early_printk.c
arch/x86_64/kernel/entry.S
arch/x86_64/kernel/functionlist [new file with mode: 0644]
arch/x86_64/kernel/head.S
arch/x86_64/kernel/io_apic.c
arch/x86_64/kernel/mce.c
arch/x86_64/kernel/mpparse.c
arch/x86_64/kernel/nmi.c
arch/x86_64/kernel/pci-dma.c
arch/x86_64/kernel/pci-gart.c
arch/x86_64/kernel/pmtimer.c
arch/x86_64/kernel/process.c
arch/x86_64/kernel/ptrace.c
arch/x86_64/kernel/setup.c
arch/x86_64/kernel/setup64.c
arch/x86_64/kernel/smp.c
arch/x86_64/kernel/time.c
arch/x86_64/kernel/traps.c
arch/x86_64/kernel/vmlinux.lds.S
arch/x86_64/kernel/x8664_ksyms.c
arch/x86_64/lib/thunk.S
arch/x86_64/mm/fault.c
arch/x86_64/mm/init.c
arch/x86_64/mm/k8topology.c
arch/x86_64/mm/numa.c
arch/x86_64/mm/srat.c
arch/x86_64/pci/mmconfig.c
block/elevator.c
drivers/acpi/Kconfig
drivers/acpi/blacklist.c
drivers/acpi/processor_idle.c
drivers/atm/.gitignore [new file with mode: 0644]
drivers/base/cpu.c
drivers/block/DAC960.c
drivers/block/Kconfig
drivers/block/Makefile
drivers/block/ataflop.c
drivers/block/cciss.c
drivers/block/cciss_scsi.c
drivers/block/cpqarray.c
drivers/block/floppy.c
drivers/block/nbd.c
drivers/block/paride/comm.c
drivers/block/paride/on26.c
drivers/block/rd.c
drivers/cdrom/cm206.c
drivers/cdrom/sbpcd.c
drivers/char/Kconfig
drivers/char/Makefile
drivers/char/agp/Kconfig
drivers/char/agp/agp.h
drivers/char/agp/ali-agp.c
drivers/char/agp/alpha-agp.c
drivers/char/agp/amd64-agp.c
drivers/char/agp/ati-agp.c
drivers/char/agp/backend.c
drivers/char/agp/efficeon-agp.c
drivers/char/agp/frontend.c
drivers/char/agp/generic.c
drivers/char/agp/hp-agp.c
drivers/char/agp/i460-agp.c
drivers/char/agp/intel-agp.c
drivers/char/agp/isoch.c
drivers/char/agp/nvidia-agp.c
drivers/char/agp/sgi-agp.c
drivers/char/agp/sis-agp.c
drivers/char/agp/sworks-agp.c
drivers/char/agp/uninorth-agp.c
drivers/char/ipmi/ipmi_msghandler.c
drivers/char/ipmi/ipmi_poweroff.c
drivers/char/istallion.c
drivers/char/mem.c
drivers/char/mxser.c
drivers/char/pcmcia/synclink_cs.c
drivers/char/ppdev.c
drivers/char/rio/Makefile
drivers/char/rio/board.h
drivers/char/rio/bootpkt.h [deleted file]
drivers/char/rio/cirrus.h
drivers/char/rio/cmdblk.h
drivers/char/rio/cmdpkt.h
drivers/char/rio/control.h [deleted file]
drivers/char/rio/daemon.h
drivers/char/rio/defaults.h [deleted file]
drivers/char/rio/error.h [deleted file]
drivers/char/rio/func.h
drivers/char/rio/host.h
drivers/char/rio/link.h
drivers/char/rio/linux_compat.h
drivers/char/rio/list.h [deleted file]
drivers/char/rio/map.h
drivers/char/rio/param.h
drivers/char/rio/parmmap.h
drivers/char/rio/phb.h
drivers/char/rio/pkt.h
drivers/char/rio/port.h
drivers/char/rio/qbuf.h [deleted file]
drivers/char/rio/rio.h
drivers/char/rio/rio_linux.c
drivers/char/rio/rioboot.c
drivers/char/rio/riocmd.c
drivers/char/rio/rioctrl.c
drivers/char/rio/riodrvr.h
drivers/char/rio/rioinit.c
drivers/char/rio/riointr.c
drivers/char/rio/rioparam.c
drivers/char/rio/riopcicopy.c [deleted file]
drivers/char/rio/rioroute.c
drivers/char/rio/riotable.c
drivers/char/rio/riotty.c
drivers/char/rio/riotypes.h [deleted file]
drivers/char/rio/rom.h [deleted file]
drivers/char/rio/rup.h
drivers/char/rio/sam.h [deleted file]
drivers/char/rio/space.h [deleted file]
drivers/char/rio/top.h [deleted file]
drivers/char/rio/typdef.h [deleted file]
drivers/char/rio/unixrup.h
drivers/char/riscom8.c
drivers/char/synclink.c
drivers/char/synclink_gt.c
drivers/char/synclinkmp.c
drivers/char/sysrq.c
drivers/char/toshiba.c
drivers/char/tpm/tpm.h
drivers/char/tty_io.c
drivers/char/watchdog/Kconfig
drivers/char/watchdog/Makefile
drivers/char/watchdog/ep93xx_wdt.c [new file with mode: 0644]
drivers/cpufreq/cpufreq.c
drivers/cpufreq/cpufreq_ondemand.c
drivers/cpufreq/cpufreq_performance.c
drivers/cpufreq/cpufreq_powersave.c
drivers/cpufreq/cpufreq_stats.c
drivers/cpufreq/cpufreq_userspace.c
drivers/cpufreq/freq_table.c
drivers/dio/dio-driver.c
drivers/eisa/.gitignore [new file with mode: 0644]
drivers/eisa/eisa-bus.c
drivers/hwmon/gl520sm.c
drivers/i2c/chips/rtc8564.c
drivers/ide/ide-disk.c
drivers/ide/ide-dma.c
drivers/ide/ide-probe.c
drivers/ide/ide.c
drivers/ieee1394/raw1394.c
drivers/infiniband/hw/mthca/mthca_qp.c
drivers/infiniband/hw/mthca/mthca_srq.c
drivers/infiniband/ulp/ipoib/ipoib.h
drivers/infiniband/ulp/ipoib/ipoib_ib.c
drivers/infiniband/ulp/ipoib/ipoib_main.c
drivers/infiniband/ulp/ipoib/ipoib_verbs.c
drivers/infiniband/ulp/srp/ib_srp.c
drivers/infiniband/ulp/srp/ib_srp.h
drivers/input/serio/hil_mlc.c
drivers/input/touchscreen/ads7846.c
drivers/isdn/hardware/avm/b1dma.c
drivers/isdn/hardware/avm/b1isa.c
drivers/isdn/hardware/avm/c4.c
drivers/isdn/hardware/avm/t1isa.c
drivers/isdn/hysdn/boardergo.c
drivers/isdn/hysdn/boardergo.h
drivers/isdn/hysdn/hycapi.c
drivers/isdn/hysdn/hysdn_boot.c
drivers/isdn/hysdn/hysdn_defs.h
drivers/isdn/hysdn/hysdn_init.c
drivers/isdn/hysdn/hysdn_net.c
drivers/isdn/hysdn/hysdn_pof.h
drivers/isdn/hysdn/hysdn_procconf.c
drivers/isdn/hysdn/hysdn_proclog.c
drivers/isdn/hysdn/hysdn_sched.c
drivers/isdn/hysdn/ince1pc.h
drivers/isdn/i4l/isdn_ppp.c
drivers/isdn/i4l/isdn_tty.c
drivers/isdn/i4l/isdn_x25iface.c
drivers/isdn/isdnloop/isdnloop.c
drivers/md/bitmap.c
drivers/md/dm-hw-handler.c
drivers/media/Kconfig
drivers/media/common/saa7146_fops.c
drivers/media/common/saa7146_vbi.c
drivers/media/common/saa7146_video.c
drivers/media/dvb/b2c2/flexcop-usb.c
drivers/media/dvb/bt8xx/Makefile
drivers/media/dvb/dvb-usb/cxusb.c
drivers/media/dvb/dvb-usb/cxusb.h
drivers/media/dvb/ttpci/av7110_v4l.c
drivers/media/video/Kconfig
drivers/media/video/Makefile
drivers/media/video/adv7170.c
drivers/media/video/adv7175.c
drivers/media/video/arv.c
drivers/media/video/bt819.c
drivers/media/video/bt856.c
drivers/media/video/bt8xx/Kconfig [new file with mode: 0644]
drivers/media/video/bt8xx/Makefile [new file with mode: 0644]
drivers/media/video/bt8xx/bt832.c [moved from drivers/media/video/bt832.c with 98% similarity]
drivers/media/video/bt8xx/bt832.h [moved from drivers/media/video/bt832.h with 100% similarity]
drivers/media/video/bt8xx/bt848.h [moved from drivers/media/video/bt848.h with 100% similarity]
drivers/media/video/bt8xx/bttv-cards.c [moved from drivers/media/video/bttv-cards.c with 95% similarity]
drivers/media/video/bt8xx/bttv-driver.c [moved from drivers/media/video/bttv-driver.c with 97% similarity]
drivers/media/video/bt8xx/bttv-gpio.c [moved from drivers/media/video/bttv-gpio.c with 100% similarity]
drivers/media/video/bt8xx/bttv-i2c.c [moved from drivers/media/video/bttv-i2c.c with 98% similarity]
drivers/media/video/bt8xx/bttv-if.c [moved from drivers/media/video/bttv-if.c with 100% similarity]
drivers/media/video/bt8xx/bttv-input.c [moved from drivers/media/video/bttv-input.c with 100% similarity]
drivers/media/video/bt8xx/bttv-risc.c [moved from drivers/media/video/bttv-risc.c with 99% similarity]
drivers/media/video/bt8xx/bttv-vbi.c [moved from drivers/media/video/bttv-vbi.c with 98% similarity]
drivers/media/video/bt8xx/bttv.h [moved from drivers/media/video/bttv.h with 95% similarity]
drivers/media/video/bt8xx/bttvp.h [moved from drivers/media/video/bttvp.h with 98% similarity]
drivers/media/video/bw-qcam.c
drivers/media/video/c-qcam.c
drivers/media/video/cpia.c
drivers/media/video/cpia.h
drivers/media/video/cpia2/cpia2.h
drivers/media/video/cpia2/cpia2_core.c
drivers/media/video/cpia2/cpia2_v4l.c
drivers/media/video/cpia_pp.c
drivers/media/video/cpia_usb.c
drivers/media/video/cs53l32a.c
drivers/media/video/cs8420.h
drivers/media/video/cx25840/cx25840-audio.c
drivers/media/video/cx25840/cx25840-core.c
drivers/media/video/cx88/Kconfig
drivers/media/video/cx88/cx88-alsa.c
drivers/media/video/cx88/cx88-blackbird.c
drivers/media/video/cx88/cx88-core.c
drivers/media/video/cx88/cx88-dvb.c
drivers/media/video/cx88/cx88-mpeg.c
drivers/media/video/cx88/cx88-tvaudio.c
drivers/media/video/cx88/cx88-vbi.c
drivers/media/video/cx88/cx88-video.c
drivers/media/video/cx88/cx88.h
drivers/media/video/dabfirmware.h [moved from drivers/usb/media/dabfirmware.h with 100% similarity]
drivers/media/video/dabusb.c [moved from drivers/usb/media/dabusb.c with 99% similarity]
drivers/media/video/dabusb.h [moved from drivers/usb/media/dabusb.h with 96% similarity]
drivers/media/video/dsbr100.c [moved from drivers/usb/media/dsbr100.c with 92% similarity]
drivers/media/video/em28xx/em28xx-cards.c
drivers/media/video/em28xx/em28xx-video.c
drivers/media/video/et61x251/Makefile [new file with mode: 0644]
drivers/media/video/et61x251/et61x251.h [moved from drivers/usb/media/et61x251.h with 97% similarity]
drivers/media/video/et61x251/et61x251_core.c [moved from drivers/usb/media/et61x251_core.c with 91% similarity]
drivers/media/video/et61x251/et61x251_sensor.h [moved from drivers/usb/media/et61x251_sensor.h with 87% similarity]
drivers/media/video/et61x251/et61x251_tas5130d1b.c [moved from drivers/usb/media/et61x251_tas5130d1b.c with 93% similarity]
drivers/media/video/font.h [new file with mode: 0644]
drivers/media/video/msp3400-driver.c
drivers/media/video/msp3400-driver.h [moved from drivers/media/video/msp3400.h with 86% similarity]
drivers/media/video/msp3400-kthreads.c
drivers/media/video/mxb.c
drivers/media/video/ov511.c [moved from drivers/usb/media/ov511.c with 99% similarity]
drivers/media/video/ov511.h [moved from drivers/usb/media/ov511.h with 99% similarity]
drivers/media/video/ovcamchip/Makefile
drivers/media/video/ovcamchip/ovcamchip_core.c
drivers/media/video/ovcamchip/ovcamchip_priv.h
drivers/media/video/planb.c
drivers/media/video/planb.h
drivers/media/video/pms.c
drivers/media/video/pwc/Makefile [moved from drivers/usb/media/pwc/Makefile with 84% similarity]
drivers/media/video/pwc/philips.txt [moved from drivers/usb/media/pwc/philips.txt with 90% similarity]
drivers/media/video/pwc/pwc-ctrl.c [moved from drivers/usb/media/pwc/pwc-ctrl.c with 92% similarity]
drivers/media/video/pwc/pwc-if.c [moved from drivers/usb/media/pwc/pwc-if.c with 93% similarity]
drivers/media/video/pwc/pwc-ioctl.h [moved from drivers/usb/media/pwc/pwc-ioctl.h with 94% similarity]
drivers/media/video/pwc/pwc-kiara.c [new file with mode: 0644]
drivers/media/video/pwc/pwc-kiara.h [moved from drivers/usb/media/pwc/pwc-kiara.h with 100% similarity]
drivers/media/video/pwc/pwc-misc.c [moved from drivers/usb/media/pwc/pwc-misc.c with 87% similarity]
drivers/media/video/pwc/pwc-nala.h [moved from drivers/usb/media/pwc/pwc-nala.h with 99% similarity]
drivers/media/video/pwc/pwc-timon.c [new file with mode: 0644]
drivers/media/video/pwc/pwc-timon.h [moved from drivers/usb/media/pwc/pwc-timon.h with 100% similarity]
drivers/media/video/pwc/pwc-uncompress.c [moved from drivers/usb/media/pwc/pwc-uncompress.c with 96% similarity]
drivers/media/video/pwc/pwc-uncompress.h [moved from drivers/usb/media/pwc/pwc-uncompress.h with 96% similarity]
drivers/media/video/pwc/pwc.h [moved from drivers/usb/media/pwc/pwc.h with 99% similarity]
drivers/media/video/saa5249.c
drivers/media/video/saa6588.c
drivers/media/video/saa7110.c
drivers/media/video/saa7111.c
drivers/media/video/saa7114.c
drivers/media/video/saa7115.c
drivers/media/video/saa7121.h
drivers/media/video/saa7134/saa7134-alsa.c
drivers/media/video/saa7134/saa7134-core.c
drivers/media/video/saa7134/saa7134-oss.c
drivers/media/video/saa7134/saa7134-ts.c
drivers/media/video/saa7134/saa7134-tvaudio.c
drivers/media/video/saa7134/saa7134-vbi.c
drivers/media/video/saa7134/saa7134-video.c
drivers/media/video/saa7134/saa7134.h
drivers/media/video/saa7146.h
drivers/media/video/saa7146reg.h
drivers/media/video/saa7185.c
drivers/media/video/saa7196.h
drivers/media/video/se401.c [moved from drivers/usb/media/se401.c with 89% similarity]
drivers/media/video/se401.h [moved from drivers/usb/media/se401.h with 99% similarity]
drivers/media/video/sn9c102/Makefile [new file with mode: 0644]
drivers/media/video/sn9c102/sn9c102.h [moved from drivers/usb/media/sn9c102.h with 96% similarity]
drivers/media/video/sn9c102/sn9c102_core.c [moved from drivers/usb/media/sn9c102_core.c with 90% similarity]
drivers/media/video/sn9c102/sn9c102_hv7131d.c [moved from drivers/usb/media/sn9c102_hv7131d.c with 93% similarity]
drivers/media/video/sn9c102/sn9c102_mi0343.c [moved from drivers/usb/media/sn9c102_mi0343.c with 73% similarity]
drivers/media/video/sn9c102/sn9c102_ov7630.c [moved from drivers/usb/media/sn9c102_ov7630.c with 95% similarity]
drivers/media/video/sn9c102/sn9c102_pas106b.c [moved from drivers/usb/media/sn9c102_pas106b.c with 94% similarity]
drivers/media/video/sn9c102/sn9c102_pas202bca.c [moved from drivers/usb/media/sn9c102_pas202bca.c with 97% similarity]
drivers/media/video/sn9c102/sn9c102_pas202bcb.c [moved from drivers/usb/media/sn9c102_pas202bcb.c with 93% similarity]
drivers/media/video/sn9c102/sn9c102_sensor.h [moved from drivers/usb/media/sn9c102_sensor.h with 91% similarity]
drivers/media/video/sn9c102/sn9c102_tas5110c1b.c [moved from drivers/usb/media/sn9c102_tas5110c1b.c with 93% similarity]
drivers/media/video/sn9c102/sn9c102_tas5130d1b.c [moved from drivers/usb/media/sn9c102_tas5130d1b.c with 93% similarity]
drivers/media/video/stradis.c
drivers/media/video/stv680.c [moved from drivers/usb/media/stv680.c with 98% similarity]
drivers/media/video/stv680.h [moved from drivers/usb/media/stv680.h with 54% similarity]
drivers/media/video/tda7432.c
drivers/media/video/tda9840.c
drivers/media/video/tda9840.h
drivers/media/video/tda9875.c
drivers/media/video/tea6415c.c
drivers/media/video/tea6420.c
drivers/media/video/tea6420.h
drivers/media/video/tuner-3036.c
drivers/media/video/tuner-core.c
drivers/media/video/tvaudio.c
drivers/media/video/tvaudio.h [deleted file]
drivers/media/video/tveeprom.c
drivers/media/video/usbvideo/Makefile [new file with mode: 0644]
drivers/media/video/usbvideo/ibmcam.c [moved from drivers/usb/media/ibmcam.c with 99% similarity]
drivers/media/video/usbvideo/konicawc.c [moved from drivers/usb/media/konicawc.c with 97% similarity]
drivers/media/video/usbvideo/ultracam.c [moved from drivers/usb/media/ultracam.c with 99% similarity]
drivers/media/video/usbvideo/usbvideo.c [moved from drivers/usb/media/usbvideo.c with 99% similarity]
drivers/media/video/usbvideo/usbvideo.h [moved from drivers/usb/media/usbvideo.h with 97% similarity]
drivers/media/video/usbvideo/vicam.c [moved from drivers/usb/media/vicam.c with 99% similarity]
drivers/media/video/v4l2-common.c
drivers/media/video/video-buf.c
drivers/media/video/videocodec.h
drivers/media/video/vino.c
drivers/media/video/vivi.c [new file with mode: 0644]
drivers/media/video/vpx3220.c
drivers/media/video/w9966.c
drivers/media/video/w9968cf.c [moved from drivers/usb/media/w9968cf.c with 80% similarity]
drivers/media/video/w9968cf.h [moved from drivers/usb/media/w9968cf.h with 97% similarity]
drivers/media/video/w9968cf_decoder.h [moved from drivers/usb/media/w9968cf_decoder.h with 94% similarity]
drivers/media/video/w9968cf_vpp.h [moved from drivers/usb/media/w9968cf_vpp.h with 98% similarity]
drivers/media/video/wm8775.c
drivers/media/video/zc0301/Makefile [new file with mode: 0644]
drivers/media/video/zc0301/zc0301.h [moved from drivers/usb/media/zc0301.h with 97% similarity]
drivers/media/video/zc0301/zc0301_core.c [moved from drivers/usb/media/zc0301_core.c with 92% similarity]
drivers/media/video/zc0301/zc0301_pas202bcb.c [moved from drivers/usb/media/zc0301_pas202bcb.c with 96% similarity]
drivers/media/video/zc0301/zc0301_sensor.h [moved from drivers/usb/media/zc0301_sensor.h with 97% similarity]
drivers/media/video/zoran.h
drivers/media/video/zoran_card.c
drivers/media/video/zoran_card.h
drivers/media/video/zoran_device.c
drivers/media/video/zoran_device.h
drivers/media/video/zoran_driver.c
drivers/media/video/zoran_procfs.c
drivers/media/video/zoran_procfs.h
drivers/media/video/zr36016.c
drivers/media/video/zr36050.c
drivers/media/video/zr36057.h
drivers/media/video/zr36060.c
drivers/media/video/zr36120.c
drivers/media/video/zr36120.h
drivers/message/i2o/debug.c
drivers/mfd/Kconfig
drivers/mmc/Kconfig
drivers/mmc/Makefile
drivers/mmc/au1xmmc.c
drivers/mmc/sdhci.c [new file with mode: 0644]
drivers/mmc/sdhci.h [new file with mode: 0644]
drivers/mtd/maps/pcmciamtd.c
drivers/net/3c59x.c
drivers/net/8139too.c
drivers/net/a2065.c
drivers/net/ariadne.c
drivers/net/arm/Kconfig
drivers/net/arm/Makefile
drivers/net/arm/at91_ether.c [new file with mode: 0644]
drivers/net/arm/at91_ether.h [new file with mode: 0644]
drivers/net/atari_bionet.c
drivers/net/atari_pamsnet.c
drivers/net/atarilance.c
drivers/net/cassini.c
drivers/net/chelsio/cxgb2.c
drivers/net/dgrs.c
drivers/net/fec_8xx/fec_main.c
drivers/net/fs_enet/fs_enet-main.c
drivers/net/gt96100eth.c
drivers/net/hamradio/dmascc.c
drivers/net/hamradio/mkiss.c
drivers/net/hp-plus.c
drivers/net/hplance.c
drivers/net/hydra.c
drivers/net/irda/irport.c
drivers/net/lance.c
drivers/net/lasi_82596.c
drivers/net/mac89x0.c
drivers/net/mace.c
drivers/net/meth.c
drivers/net/ne-h8300.c
drivers/net/ne2k-pci.c
drivers/net/ni5010.c
drivers/net/sk98lin/skge.c
drivers/net/sky2.h
drivers/net/sun3lance.c
drivers/net/wireless/Kconfig
drivers/net/wireless/prism54/oid_mgt.c
drivers/net/wireless/spectrum_cs.c
drivers/net/zorro8390.c
drivers/parisc/sba_iommu.c
drivers/parisc/superio.c
drivers/pnp/isapnp/core.c
drivers/s390/Kconfig
drivers/s390/block/Kconfig
drivers/s390/block/Makefile
drivers/s390/block/dasd.c
drivers/s390/block/dasd_3990_erp.c
drivers/s390/block/dasd_cmb.c [deleted file]
drivers/s390/block/dasd_devmap.c
drivers/s390/block/dasd_eckd.c
drivers/s390/block/dasd_eckd.h
drivers/s390/block/dasd_eer.c [new file with mode: 0644]
drivers/s390/block/dasd_int.h
drivers/s390/block/dasd_ioctl.c
drivers/s390/block/dcssblk.c
drivers/s390/char/Makefile
drivers/s390/char/fs3270.c
drivers/s390/char/keyboard.c
drivers/s390/char/monreader.c
drivers/s390/char/raw3270.c
drivers/s390/char/tape.h
drivers/s390/char/tape_34xx.c
drivers/s390/char/tape_3590.c [new file with mode: 0644]
drivers/s390/char/tape_3590.h [new file with mode: 0644]
drivers/s390/char/tape_class.c
drivers/s390/char/tape_core.c
drivers/s390/char/tape_std.c
drivers/s390/char/tape_std.h
drivers/s390/char/tty3270.c
drivers/s390/char/vmlogrdr.c
drivers/s390/cio/ccwgroup.c
drivers/s390/cio/chsc.c
drivers/s390/cio/chsc.h
drivers/s390/cio/css.c
drivers/s390/cio/css.h
drivers/s390/cio/device.c
drivers/s390/cio/device_fsm.c
drivers/s390/cio/device_ops.c
drivers/s390/cio/qdio.c
drivers/s390/crypto/z90hardware.c
drivers/s390/crypto/z90main.c
drivers/s390/net/claw.c
drivers/s390/net/fsm.c
drivers/s390/net/iucv.c
drivers/s390/net/lcs.c
drivers/s390/net/netiucv.c
drivers/s390/net/qeth_eddp.c
drivers/s390/net/qeth_main.c
drivers/s390/net/qeth_sys.c
drivers/s390/s390_rdev.c
drivers/scsi/arm/cumana_2.c
drivers/scsi/arm/eesox.c
drivers/scsi/arm/powertec.c
drivers/scsi/ata_piix.c
drivers/scsi/atari_scsi.c
drivers/scsi/g_NCR5380.c
drivers/scsi/g_NCR5380.h
drivers/scsi/in2000.c
drivers/scsi/libata-bmdma.c
drivers/scsi/libata-core.c
drivers/scsi/libata-scsi.c
drivers/scsi/megaraid/megaraid_mbox.c
drivers/scsi/sata_nv.c
drivers/scsi/sata_sil.c
drivers/scsi/sata_sil24.c
drivers/scsi/sata_uli.c
drivers/scsi/sata_vsc.c
drivers/scsi/scsi_sysfs.c
drivers/scsi/sd.c
drivers/serial/8250_hp300.c
drivers/serial/ioc4_serial.c
drivers/serial/mpc52xx_uart.c
drivers/serial/mpsc.c
drivers/serial/mpsc.h [deleted file]
drivers/usb/Kconfig
drivers/usb/Makefile
drivers/usb/image/microtek.c
drivers/usb/input/hid-core.c
drivers/usb/media/Kconfig [deleted file]
drivers/usb/media/Makefile [deleted file]
drivers/usb/media/pwc/pwc-kiara.c [deleted file]
drivers/usb/media/pwc/pwc-timon.c [deleted file]
drivers/usb/serial/option.c
drivers/video/aty/radeon_pm.c
drivers/video/backlight/locomolcd.c
drivers/video/bw2.c
drivers/video/cirrusfb.c
drivers/video/ffb.c
drivers/video/hpfb.c
drivers/video/matrox/matroxfb_DAC1064.c
drivers/video/matrox/matroxfb_DAC1064.h
drivers/video/matrox/matroxfb_Ti3026.c
drivers/video/matrox/matroxfb_Ti3026.h
drivers/video/matrox/matroxfb_base.c
drivers/video/matrox/matroxfb_misc.c
drivers/video/pm3fb.c
drivers/video/sstfb.c
drivers/w1/Kconfig
drivers/w1/Makefile
drivers/w1/masters/Kconfig [new file with mode: 0644]
drivers/w1/masters/Makefile [new file with mode: 0644]
drivers/w1/masters/ds2482.c [new file with mode: 0644]
drivers/w1/masters/ds_w1_bridge.c [moved from drivers/w1/ds_w1_bridge.c with 75% similarity]
drivers/w1/masters/dscore.c [moved from drivers/w1/dscore.c with 99% similarity]
drivers/w1/masters/dscore.h [moved from drivers/w1/dscore.h with 100% similarity]
drivers/w1/masters/matrox_w1.c [moved from drivers/w1/matrox_w1.c with 91% similarity]
drivers/w1/slaves/Kconfig [new file with mode: 0644]
drivers/w1/slaves/Makefile [new file with mode: 0644]
drivers/w1/slaves/w1_ds2433.c [moved from drivers/w1/w1_ds2433.c with 98% similarity]
drivers/w1/slaves/w1_smem.c [moved from drivers/w1/w1_smem.c with 94% similarity]
drivers/w1/slaves/w1_therm.c [moved from drivers/w1/w1_therm.c with 98% similarity]
drivers/w1/w1.c
drivers/w1/w1.h
drivers/w1/w1_family.c
drivers/w1/w1_int.c
drivers/w1/w1_io.c
drivers/zorro/zorro-driver.c
fs/9p/9p.h
fs/9p/Makefile
fs/9p/conv.c
fs/9p/conv.h
fs/9p/debug.h
fs/9p/error.c
fs/9p/error.h
fs/9p/fcall.c [moved from fs/9p/9p.c with 96% similarity]
fs/9p/fcprint.c [new file with mode: 0644]
fs/9p/fid.c
fs/9p/fid.h
fs/9p/mux.c
fs/9p/mux.h
fs/9p/trans_fd.c
fs/9p/trans_sock.c [deleted file]
fs/9p/transport.h
fs/9p/v9fs.c
fs/9p/v9fs.h
fs/9p/v9fs_vfs.h
fs/9p/vfs_addr.c
fs/9p/vfs_dentry.c
fs/9p/vfs_dir.c
fs/9p/vfs_file.c
fs/9p/vfs_inode.c
fs/9p/vfs_super.c
fs/Kconfig
fs/adfs/super.c
fs/affs/super.c
fs/afs/cmservice.c
fs/afs/super.c
fs/aio.c
fs/befs/datastream.c
fs/befs/linuxvfs.c
fs/bfs/inode.c
fs/binfmt_elf.c
fs/binfmt_elf_fdpic.c
fs/binfmt_flat.c
fs/bio.c
fs/block_dev.c
fs/buffer.c
fs/char_dev.c
fs/cifs/cifsfs.c
fs/cifs/cifssmb.c
fs/coda/cache.c
fs/coda/cnode.c
fs/coda/coda_int.h [new file with mode: 0644]
fs/coda/dir.c
fs/coda/file.c
fs/coda/inode.c
fs/coda/psdev.c
fs/compat.c
fs/compat_ioctl.c
fs/dcache.c
fs/direct-io.c
fs/dquot.c
fs/efs/super.c
fs/eventpoll.c
fs/exec.c
fs/ext2/ext2.h
fs/ext2/super.c
fs/ext3/balloc.c
fs/ext3/bitmap.c
fs/ext3/super.c
fs/fat/cache.c
fs/fat/inode.c
fs/freevxfs/vxfs_super.c
fs/fs-writeback.c
fs/hpfs/super.c
fs/inode.c
fs/inotify.c
fs/isofs/inode.c
fs/isofs/isofs.h
fs/jbd/journal.c
fs/jbd/transaction.c
fs/jffs/inode-v23.c
fs/jffs2/super.c
fs/jfs/jfs_debug.c
fs/jfs/super.c
fs/lockd/clntlock.c
fs/lockd/clntproc.c
fs/lockd/host.c
fs/lockd/mon.c
fs/lockd/svc.c
fs/lockd/svc4proc.c
fs/lockd/svclock.c
fs/lockd/svcproc.c
fs/lockd/svcshare.c
fs/lockd/svcsubs.c
fs/lockd/xdr.c
fs/lockd/xdr4.c
fs/locks.c
fs/mbcache.c
fs/minix/bitmap.c
fs/minix/inode.c
fs/minix/itree_v1.c
fs/minix/itree_v2.c
fs/namei.c
fs/namespace.c
fs/ncpfs/inode.c
fs/nfs/callback.c
fs/nfs/callback_xdr.c
fs/nfs/delegation.c
fs/nfs/delegation.h
fs/nfs/dir.c
fs/nfs/direct.c
fs/nfs/file.c
fs/nfs/idmap.c
fs/nfs/inode.c
fs/nfs/iostat.h [new file with mode: 0644]
fs/nfs/mount_clnt.c
fs/nfs/nfs2xdr.c
fs/nfs/nfs3acl.c
fs/nfs/nfs3proc.c
fs/nfs/nfs3xdr.c
fs/nfs/nfs4proc.c
fs/nfs/nfs4state.c
fs/nfs/nfs4xdr.c
fs/nfs/pagelist.c
fs/nfs/proc.c
fs/nfs/read.c
fs/nfs/unlink.c
fs/nfs/write.c
fs/nfsctl.c
fs/nfsd/nfs4acl.c
fs/nfsd/nfs4callback.c
fs/nfsd/nfs4state.c
fs/nfsd/nfs4xdr.c
fs/nfsd/nfsctl.c
fs/nfsd/nfssvc.c
fs/nls/nls_euc-jp.c
fs/ntfs/super.c
fs/ocfs2/alloc.c
fs/ocfs2/aops.c
fs/ocfs2/buffer_head_io.c
fs/ocfs2/cluster/heartbeat.c
fs/ocfs2/cluster/masklog.h
fs/ocfs2/dcache.c
fs/ocfs2/dir.c
fs/ocfs2/dlm/dlmast.c
fs/ocfs2/dlm/dlmcommon.h
fs/ocfs2/dlm/dlmconvert.c
fs/ocfs2/dlm/dlmdebug.c
fs/ocfs2/dlm/dlmfs.c
fs/ocfs2/dlm/dlmlock.c
fs/ocfs2/dlm/dlmmaster.c
fs/ocfs2/dlm/dlmrecovery.c
fs/ocfs2/dlm/dlmunlock.c
fs/ocfs2/dlmglue.c
fs/ocfs2/export.c
fs/ocfs2/extent_map.c
fs/ocfs2/file.c
fs/ocfs2/inode.c
fs/ocfs2/journal.c
fs/ocfs2/localalloc.c
fs/ocfs2/namei.c
fs/ocfs2/ocfs2.h
fs/ocfs2/suballoc.c
fs/ocfs2/super.c
fs/ocfs2/super.h
fs/ocfs2/uptodate.c
fs/ocfs2/vote.c
fs/open.c
fs/partitions/ibm.c
fs/pipe.c
fs/pnode.c
fs/proc/base.c
fs/proc/inode.c
fs/proc/proc_misc.c
fs/qnx4/inode.c
fs/read_write.c
fs/reiserfs/file.c
fs/reiserfs/fix_node.c
fs/reiserfs/item_ops.c
fs/reiserfs/journal.c
fs/reiserfs/prints.c
fs/reiserfs/stree.c
fs/reiserfs/super.c
fs/reiserfs/xattr_acl.c
fs/romfs/inode.c
fs/smbfs/inode.c
fs/super.c
fs/sysv/inode.c
fs/sysv/super.c
fs/udf/inode.c
fs/udf/super.c
fs/ufs/super.c
fs/xfs/linux-2.6/kmem.h
fs/xfs/linux-2.6/xfs_stats.c
fs/xfs/xfs_vnodeops.c
include/acpi/acpi_bus.h
include/asm-alpha/io.h
include/asm-alpha/poll.h
include/asm-arm/arch-at91rm9200/at91rm9200_emac.h [new file with mode: 0644]
include/asm-arm/io.h
include/asm-arm/poll.h
include/asm-arm26/poll.h
include/asm-cris/poll.h
include/asm-cris/system.h
include/asm-frv/poll.h
include/asm-h8300/poll.h
include/asm-i386/dmi.h [new file with mode: 0644]
include/asm-i386/io.h
include/asm-i386/poll.h
include/asm-i386/system.h
include/asm-ia64/acpi.h
include/asm-ia64/asmmacro.h
include/asm-ia64/linkage.h
include/asm-ia64/machvec_dig.h
include/asm-ia64/numa.h
include/asm-ia64/numnodes.h
include/asm-ia64/page.h
include/asm-ia64/pal.h
include/asm-ia64/poll.h
include/asm-ia64/processor.h
include/asm-ia64/sn/l1.h
include/asm-ia64/sn/pcibr_provider.h
include/asm-ia64/sn/pcidev.h
include/asm-ia64/sn/sn_feature_sets.h
include/asm-ia64/sn/sn_sal.h
include/asm-ia64/system.h
include/asm-m32r/poll.h
include/asm-m68k/poll.h
include/asm-mips/io.h
include/asm-mips/linkage.h
include/asm-mips/poll.h
include/asm-parisc/io.h
include/asm-parisc/poll.h
include/asm-powerpc/poll.h
include/asm-s390/bug.h
include/asm-s390/poll.h
include/asm-sh/io.h
include/asm-sh/poll.h
include/asm-sh64/poll.h
include/asm-sparc/cpudata.h
include/asm-sparc/poll.h
include/asm-sparc/smp.h
include/asm-sparc/spinlock.h
include/asm-sparc64/poll.h
include/asm-v850/linkage.h
include/asm-v850/poll.h
include/asm-x86_64/apicdef.h
include/asm-x86_64/dmi.h [new file with mode: 0644]
include/asm-x86_64/elf.h
include/asm-x86_64/floppy.h
include/asm-x86_64/io.h
include/asm-x86_64/local.h
include/asm-x86_64/mmu_context.h
include/asm-x86_64/mmzone.h
include/asm-x86_64/numa.h
include/asm-x86_64/pda.h
include/asm-x86_64/pgalloc.h
include/asm-x86_64/pgtable.h
include/asm-x86_64/poll.h
include/asm-x86_64/proto.h
include/asm-x86_64/string.h
include/asm-x86_64/suspend.h
include/asm-x86_64/system.h
include/asm-xtensa/poll.h
include/linux/bitmap.h
include/linux/bitops.h
include/linux/bootmem.h
include/linux/capability.h
include/linux/cpu.h
include/linux/cpumask.h
include/linux/cpuset.h
include/linux/dcache.h
include/linux/dio.h
include/linux/dmi.h
include/linux/fadvise.h
include/linux/fs.h
include/linux/fsnotify.h
include/linux/i2c-id.h
include/linux/ide.h
include/linux/init.h
include/linux/inotify.h
include/linux/irq.h
include/linux/jbd.h
include/linux/kernel.h
include/linux/libata.h
include/linux/linkage.h
include/linux/lockd/lockd.h
include/linux/lockd/share.h
include/linux/lockd/xdr.h
include/linux/major.h
include/linux/mempolicy.h
include/linux/module.h
include/linux/moduleparam.h
include/linux/nfs_fs.h
include/linux/nfs_fs_i.h
include/linux/nfs_fs_sb.h
include/linux/nfs_xdr.h
include/linux/pagemap.h
include/linux/pci_ids.h
include/linux/platform.h [deleted file]
include/linux/ppdev.h
include/linux/quota.h
include/linux/radix-tree.h
include/linux/reiserfs_fs.h
include/linux/reiserfs_xattr.h
include/linux/sched.h
include/linux/security.h
include/linux/slab.h
include/linux/string.h
include/linux/sunrpc/clnt.h
include/linux/sunrpc/gss_krb5.h
include/linux/sunrpc/metrics.h [new file with mode: 0644]
include/linux/sunrpc/rpc_pipe_fs.h
include/linux/sunrpc/sched.h
include/linux/sunrpc/xprt.h
include/linux/syscalls.h
include/linux/time.h
include/linux/timer.h
include/linux/timex.h
include/linux/tty_flip.h
include/linux/udf_fs_i.h
include/linux/videodev2.h
include/linux/writeback.h
include/linux/zorro.h
include/media/audiochip.h
include/media/cs53l32a.h [new file with mode: 0644]
include/media/i2c-addr.h [new file with mode: 0644]
include/media/msp3400.h [new file with mode: 0644]
include/media/rds.h [moved from drivers/media/video/rds.h with 99% similarity]
include/media/saa7146_vv.h
include/media/tvaudio.h [new file with mode: 0644]
include/media/v4l2-common.h
include/media/video-buf.h
include/media/wm8775.h [new file with mode: 0644]
include/net/route.h
include/net/sock.h
include/scsi/scsi_host.h
include/sound/opl3.h
include/video/pm3fb.h
init/Kconfig
init/do_mounts.c
init/initramfs.c
init/main.c
ipc/msg.c
ipc/shm.c
kernel/capability.c
kernel/cpu.c
kernel/cpuset.c
kernel/exec_domain.c
kernel/fork.c
kernel/irq/Makefile
kernel/irq/manage.c
kernel/irq/migration.c [new file with mode: 0644]
kernel/itimer.c
kernel/ksysfs.c
kernel/kthread.c
kernel/module.c
kernel/params.c
kernel/power/smp.c
kernel/printk.c
kernel/rcupdate.c
kernel/rcutorture.c
kernel/softlockup.c
kernel/sys.c
kernel/sysctl.c
kernel/time.c
kernel/timer.c
kernel/user.c
lib/Kconfig.debug
lib/Makefile
lib/bitmap.c
lib/cpumask.c [new file with mode: 0644]
lib/radix-tree.c
lib/swiotlb.c
mm/Kconfig
mm/bootmem.c
mm/fadvise.c
mm/filemap.c
mm/memory.c
mm/mempolicy.c
mm/mmap.c
mm/msync.c
mm/page-writeback.c
mm/page_alloc.c
mm/slab.c
mm/slob.c
mm/util.c
mm/vmscan.c
net/bluetooth/af_bluetooth.c
net/bridge/br_stp_bpdu.c
net/core/datagram.c
net/core/dev.c
net/core/skbuff.c
net/core/sock.c
net/dccp/proto.c
net/ipv4/icmp.c
net/ipv4/inet_hashtables.c
net/ipv4/netfilter/ip_nat_standalone.c
net/ipv4/route.c
net/ipv4/tcp.c
net/netfilter/x_tables.c
net/rxrpc/main.c
net/sctp/input.c
net/sctp/socket.c
net/socket.c
net/sunrpc/auth.c
net/sunrpc/auth_gss/auth_gss.c
net/sunrpc/auth_gss/gss_krb5_seal.c
net/sunrpc/auth_gss/gss_krb5_unseal.c
net/sunrpc/auth_gss/gss_krb5_wrap.c
net/sunrpc/auth_gss/gss_spkm3_mech.c
net/sunrpc/auth_gss/gss_spkm3_seal.c
net/sunrpc/auth_gss/gss_spkm3_unseal.c
net/sunrpc/clnt.c
net/sunrpc/pmap_clnt.c
net/sunrpc/rpc_pipe.c
net/sunrpc/sched.c
net/sunrpc/stats.c
net/sunrpc/xprt.c
net/sunrpc/xprtsock.c
net/tipc/link.c
net/unix/af_unix.c
scripts/Kbuild.include
scripts/Makefile.build
scripts/Makefile.clean
scripts/Makefile.modinst
scripts/Makefile.modpost
scripts/basic/fixdep.c
scripts/checkconfig.pl [deleted file]
scripts/extract-ikconfig
scripts/genksyms/genksyms.c
scripts/genksyms/genksyms.h
scripts/kallsyms.c
scripts/kconfig/Makefile
scripts/kconfig/confdata.c
scripts/kconfig/lxdialog/Makefile
scripts/mkmakefile
scripts/mod/file2alias.c
scripts/mod/mk_elfconfig.c
scripts/mod/modpost.c
scripts/mod/modpost.h
scripts/mod/sumversion.c
scripts/namespace.pl
scripts/package/Makefile
scripts/profile2linkerlist.pl [new file with mode: 0644]
scripts/reference_discarded.pl [deleted file]
scripts/reference_init.pl [deleted file]
security/commoncap.c
security/keys/key.c
security/keys/keyctl.c
security/security.c
sound/oss/.gitignore [new file with mode: 0644]
sound/oss/au1000.c
sound/oss/au1550_ac97.c
sound/oss/awe_wave.c
sound/oss/dmasound/dmasound_core.c
sound/oss/ite8172.c
sound/oss/sb_mixer.c
sound/oss/sequencer.c
sound/oss/swarm_cs4297a.c
sound/oss/waveartist.c
sound/ppc/toonie.c
sound/sparc/cs4231.c

diff --git a/CREDITS b/CREDITS
index af70678a0afdf95ef720e7b35202eda1323a68c9..c6d69bf10e1513cf366ffe7e576ddb519433f869 100644 (file)
--- a/CREDITS
+++ b/CREDITS
@@ -2007,13 +2007,14 @@ S: University of Stuttgart, Germany and
 S: Ecole Nationale Superieure des Telecommunications, Paris
 
 N: Jamie Lokier
-E: jamie@imbolc.ucc.ie
+E: jamie@shareable.org
+W: http://www.shareable.org/
 D: Reboot-through-BIOS for broken 486 motherboards
-D: Some parport fixes
-S: 11 Goodson Walk
-S: Marston
+D: Parport fixes, futex improvements
+D: First instruction of x86 sysenter path :)
+S: 51 Sunningwell Road
 S: Oxford
-S: OX3 0HX
+S: OX1 4SZ
 S: United Kingdom
 
 N: Mark Lord
index 2975291e296a01b2ad8afd70e99f2e66326780ba..7d87dd73cbe40552d67450059c45934faff45529 100644 (file)
@@ -28,7 +28,7 @@ PS_METHOD     = $(prefer-db2x)
 
 ###
 # The targets that may be used.
-.PHONY:        xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs
+PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs
 
 BOOKS := $(addprefix $(obj)/,$(DOCBOOKS))
 xmldocs: $(BOOKS)
@@ -211,3 +211,9 @@ clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS))
 
 #man put files in man subdir - traverse down
 subdir- := man/
+
+
+# Declare the contents of the .PHONY variable as phony.  We keep that
+# information in a variable se we can use it in if_changed and friends.
+
+.PHONY: $(PHONY)
index 6f41f2f5c6f6bb656c4f91f6ffcf6a06dcde49b7..90ed23df1f68f6f14c0077d7a196c36c0db08c11 100644 (file)
@@ -270,25 +270,6 @@ CPU B:  spin_unlock_irqrestore(&amp;dev_lock, flags)
       </para>
     </sect1>
 
-    <sect1>
-      <title>ISA legacy functions</title>
-      <para>
-       On older kernels (2.2 and earlier) the ISA bus could be read or
-       written with these functions and without ioremap being used. This is
-       no longer true in Linux 2.4. A set of equivalent functions exist for
-       easy legacy driver porting. The functions available are prefixed
-       with 'isa_' and are <function>isa_readb</function>,
-       <function>isa_writeb</function>, <function>isa_readw</function>, 
-       <function>isa_writew</function>, <function>isa_readl</function>,
-       <function>isa_writel</function>, <function>isa_memcpy_fromio</function>
-       and <function>isa_memcpy_toio</function>
-      </para>
-      <para>
-       These functions should not be used in new drivers, and will
-       eventually be going away.
-      </para>
-    </sect1>
-
   </chapter>
 
   <chapter>
index 5ed85af88789afc46c0f1065ca701552d96cfebc..b4ea51ad3610f7c2a99f18c3ee2dc776ebfe0731 100644 (file)
@@ -360,7 +360,7 @@ uses of RCU may be found in listRCU.txt, arrayRCU.txt, and NMI-RCU.txt.
                struct foo *new_fp;
                struct foo *old_fp;
 
-               new_fp = kmalloc(sizeof(*fp), GFP_KERNEL);
+               new_fp = kmalloc(sizeof(*new_fp), GFP_KERNEL);
                spin_lock(&foo_mutex);
                old_fp = gbl_foo;
                *new_fp = *old_fp;
@@ -461,7 +461,7 @@ The foo_update_a() function might then be written as follows:
                struct foo *new_fp;
                struct foo *old_fp;
 
-               new_fp = kmalloc(sizeof(*fp), GFP_KERNEL);
+               new_fp = kmalloc(sizeof(*new_fp), GFP_KERNEL);
                spin_lock(&foo_mutex);
                old_fp = gbl_foo;
                *new_fp = *old_fp;
index fad566bb02fc8fdc509aa0b27c122fafe55d655e..76850295af8f93b0627f8a220f90ee8c6a677e92 100644 (file)
@@ -118,7 +118,7 @@ to store page tables.  The recommended placement is 32KiB into RAM.
 
 In either case, the following conditions must be met:
 
-- Quiesce all DMA capable devicess so that memory does not get
+- Quiesce all DMA capable devices so that memory does not get
   corrupted by bogus network packets or disk data. This will save
   you many hours of debug.
 
index 5ed6f3530b869fea639028a576fb33d364873a66..9b9c8226fdc428665fb2e792ce142b77abf2d80d 100644 (file)
@@ -89,7 +89,7 @@ Modules
   Although modularisation is supported (and required for the FP emulator),
   each module on an ARM2/ARM250/ARM3 machine when is loaded will take
   memory up to the next 32k boundary due to the size of the pages.
-  Therefore, modularisation on these machines really worth it?
+  Therefore, is modularisation on these machines really worth it?
 
   However, ARM6 and up machines allow modules to take multiples of 4k, and
   as such Acorn RiscPCs and other architectures using these processors can
index 0abd0720d7ed0d59d5b8b88b7589e2266646811d..0cb1e64bde80129a3d5e36935b082e516afc8a6c 100644 (file)
@@ -58,7 +58,7 @@ below:
  video_y
 
    This describes the character position of cursor on VGA console, and
-   is otherwise unused. (should not used for other console types, and
+   is otherwise unused. (should not be used for other console types, and
    should not be used for other purposes).
 
  memc_control_reg
index 30c41459953c3ca04e6dd93ddf8702ced7cb89c4..159e2a0c3e80fa229fd2ff95f0e2015caf017ab7 100644 (file)
@@ -18,7 +18,8 @@ CONTENTS:
   1.4 What are exclusive cpusets ?
   1.5 What does notify_on_release do ?
   1.6 What is memory_pressure ?
-  1.7 How do I use cpusets ?
+  1.7 What is memory spread ?
+  1.8 How do I use cpusets ?
 2. Usage Examples and Syntax
   2.1 Basic Usage
   2.2 Adding/removing cpus
@@ -317,7 +318,78 @@ the tasks in the cpuset, in units of reclaims attempted per second,
 times 1000.
 
 
-1.7 How do I use cpusets ?
+1.7 What is memory spread ?
+---------------------------
+There are two boolean flag files per cpuset that control where the
+kernel allocates pages for the file system buffers and related in
+kernel data structures.  They are called 'memory_spread_page' and
+'memory_spread_slab'.
+
+If the per-cpuset boolean flag file 'memory_spread_page' is set, then
+the kernel will spread the file system buffers (page cache) evenly
+over all the nodes that the faulting task is allowed to use, instead
+of preferring to put those pages on the node where the task is running.
+
+If the per-cpuset boolean flag file 'memory_spread_slab' is set,
+then the kernel will spread some file system related slab caches,
+such as for inodes and dentries evenly over all the nodes that the
+faulting task is allowed to use, instead of preferring to put those
+pages on the node where the task is running.
+
+The setting of these flags does not affect anonymous data segment or
+stack segment pages of a task.
+
+By default, both kinds of memory spreading are off, and memory
+pages are allocated on the node local to where the task is running,
+except perhaps as modified by the tasks NUMA mempolicy or cpuset
+configuration, so long as sufficient free memory pages are available.
+
+When new cpusets are created, they inherit the memory spread settings
+of their parent.
+
+Setting memory spreading causes allocations for the affected page
+or slab caches to ignore the tasks NUMA mempolicy and be spread
+instead.    Tasks using mbind() or set_mempolicy() calls to set NUMA
+mempolicies will not notice any change in these calls as a result of
+their containing tasks memory spread settings.  If memory spreading
+is turned off, then the currently specified NUMA mempolicy once again
+applies to memory page allocations.
+
+Both 'memory_spread_page' and 'memory_spread_slab' are boolean flag
+files.  By default they contain "0", meaning that the feature is off
+for that cpuset.  If a "1" is written to that file, then that turns
+the named feature on.
+
+The implementation is simple.
+
+Setting the flag 'memory_spread_page' turns on a per-process flag
+PF_SPREAD_PAGE for each task that is in that cpuset or subsequently
+joins that cpuset.  The page allocation calls for the page cache
+is modified to perform an inline check for this PF_SPREAD_PAGE task
+flag, and if set, a call to a new routine cpuset_mem_spread_node()
+returns the node to prefer for the allocation.
+
+Similarly, setting 'memory_spread_cache' turns on the flag
+PF_SPREAD_SLAB, and appropriately marked slab caches will allocate
+pages from the node returned by cpuset_mem_spread_node().
+
+The cpuset_mem_spread_node() routine is also simple.  It uses the
+value of a per-task rotor cpuset_mem_spread_rotor to select the next
+node in the current tasks mems_allowed to prefer for the allocation.
+
+This memory placement policy is also known (in other contexts) as
+round-robin or interleave.
+
+This policy can provide substantial improvements for jobs that need
+to place thread local data on the corresponding node, but that need
+to access large file system data sets that need to be spread across
+the several nodes in the jobs cpuset in order to fit.  Without this
+policy, especially for jobs that might have one thread reading in the
+data set, the memory allocation across the nodes in the jobs cpuset
+can become very uneven.
+
+
+1.8 How do I use cpusets ?
 --------------------------
 
 In order to minimize the impact of cpusets on critical kernel
index c7a4d0faab228ab63d3700ee9f2cc2ae730009f3..495858b236b615a08a2824922c546fc1e2b13c9b 100644 (file)
@@ -116,6 +116,17 @@ Who:       Harald Welte <laforge@netfilter.org>
 
 ---------------------------
 
+What:  remove EXPORT_SYMBOL(kernel_thread)
+When:  August 2006
+Files: arch/*/kernel/*_ksyms.c
+Why:   kernel_thread is a low-level implementation detail.  Drivers should
+        use the <linux/kthread.h> API instead which shields them from
+       implementation details and provides a higherlevel interface that
+       prevents bugs and code duplication
+Who:   Christoph Hellwig <hch@lst.de>
+
+---------------------------
+
 What:  EXPORT_SYMBOL(lookup_hash)
 When:  January 2006
 Why:   Too low-level interface.  Use lookup_one_len or lookup_create instead.
@@ -165,6 +176,18 @@ Who:       Richard Knutsson <ricknu-0@student.ltu.se> and Greg Kroah-Hartman <gregkh@s
 
 ---------------------------
 
+What:  Usage of invalid timevals in setitimer
+When:  March 2007
+Why:   POSIX requires to validate timevals in the setitimer call. This
+       was never done by Linux. The invalid (e.g. negative timevals) were
+       silently converted to more or less random timeouts and intervals.
+       Until the removal a per boot limited number of warnings is printed
+       and the timevals are sanitized.
+
+Who:   Thomas Gleixner <tglx@linutronix.de>
+
+---------------------------
+
 What:  I2C interface of the it87 driver
 When:  January 2007
 Why:   The ISA interface is faster and should be always available. The I2C
@@ -174,6 +197,17 @@ Who:       Jean Delvare <khali@linux-fr.org>
 
 ---------------------------
 
+What:  remove EXPORT_SYMBOL(tasklist_lock)
+When:  August 2006
+Files: kernel/fork.c
+Why:   tasklist_lock protects the kernel internal task list.  Modules have
+       no business looking at it, and all instances in drivers have been due
+       to use of too-lowlevel APIs.  Having this symbol exported prevents
+       moving to more scalable locking schemes for the task list.
+Who:   Christoph Hellwig <hch@lst.de>
+
+---------------------------
+
 What:  mount/umount uevents
 When:  February 2007
 Why:   These events are not correct, and do not properly let userspace know
similarity index 82%
rename from Documentation/filesystems/v9fs.txt
rename to Documentation/filesystems/9p.txt
index 24c7a9c41f0d0c820216722dfbba5eceb6fd96b4..43b89c214d2015a1026ceae21b266c3dbd82a58b 100644 (file)
@@ -1,5 +1,5 @@
-                       V9FS: 9P2000 for Linux
-                       ======================
+                   v9fs: Plan 9 Resource Sharing for Linux
+                   =======================================
 
 ABOUT
 =====
@@ -9,18 +9,19 @@ v9fs is a Unix implementation of the Plan 9 9p remote filesystem protocol.
 This software was originally developed by Ron Minnich <rminnich@lanl.gov>
 and Maya Gokhale <maya@lanl.gov>.  Additional development by Greg Watson
 <gwatson@lanl.gov> and most recently Eric Van Hensbergen
-<ericvh@gmail.com> and Latchesar Ionkov <lucho@ionkov.net>.
+<ericvh@gmail.com>, Latchesar Ionkov <lucho@ionkov.net> and Russ Cox
+<rsc@swtch.com>.
 
 USAGE
 =====
 
 For remote file server:
 
-       mount -t 9P 10.10.1.2 /mnt/9
+       mount -t 9p 10.10.1.2 /mnt/9
 
 For Plan 9 From User Space applications (http://swtch.com/plan9)
 
-       mount -t 9P `namespace`/acme /mnt/9 -o proto=unix,name=$USER
+       mount -t 9p `namespace`/acme /mnt/9 -o proto=unix,uname=$USER
 
 OPTIONS
 =======
@@ -32,7 +33,7 @@ OPTIONS
                        fd   - used passed file descriptors for connection
                                 (see rfdno and wfdno)
 
-  name=name    user name to attempt mount as on the remote server.  The
+  uname=name   user name to attempt mount as on the remote server.  The
                server may override or ignore this value.  Certain user
                names may require authentication.
 
@@ -42,7 +43,7 @@ OPTIONS
   debug=n      specifies debug level.  The debug level is a bitmask.
                        0x01 = display verbose error messages
                        0x02 = developer debug (DEBUG_CURRENT)
-                       0x04 = display 9P trace
+                       0x04 = display 9p trace
                        0x08 = display VFS trace
                        0x10 = display Marshalling debug
                        0x20 = display RPC debug
@@ -53,11 +54,11 @@ OPTIONS
 
   wfdno=n      the file descriptor for writing with proto=fd
 
-  maxdata=n    the number of bytes to use for 9P packet payload (msize)
+  maxdata=n    the number of bytes to use for 9p packet payload (msize)
 
   port=n       port to connect to on the remote server
 
-  noextend     force legacy mode (no 9P2000.u semantics)
+  noextend     force legacy mode (no 9p2000.u semantics)
 
   uid          attempt to mount as a particular uid
 
@@ -72,7 +73,7 @@ OPTIONS
 RESOURCES
 =========
 
-The Linux version of the 9P server is now maintained under the npfs project
+The Linux version of the 9p server is now maintained under the npfs project
 on sourceforge (http://sourceforge.net/projects/npfs).
 
 There are user and developer mailing lists available through the v9fs project
index 944cf109a6f5a36ad51cf6d8fd47819ab220986e..99902ae6804e6edb0550fac53ce34b9070842895 100644 (file)
@@ -121,7 +121,7 @@ Table 1-1: Process specific entries in /proc
 ..............................................................................
  File    Content                                        
  cmdline Command line arguments                         
- cpu    Current and last cpu in wich it was executed           (2.4)(smp)
+ cpu    Current and last cpu in which it was executed          (2.4)(smp)
  cwd    Link to the current working directory
  environ Values of environment variables      
  exe    Link to the executable of this process
@@ -309,13 +309,13 @@ is the same by default:
   > cat /proc/irq/0/smp_affinity 
   ffffffff
 
-It's a bitmask, in wich you can specify wich CPUs can handle the IRQ, you can
+It's a bitmask, in which you can specify which CPUs can handle the IRQ, you can
 set it by doing:
 
   > echo 1 > /proc/irq/prof_cpu_mask
 
 This means that only the first CPU will handle the IRQ, but you can also echo 5
-wich means that only the first and fourth CPU can handle the IRQ.
+which means that only the first and fourth CPU can handle the IRQ.
 
 The way IRQs are routed is handled by the IO-APIC, and it's Round Robin
 between all the CPUs which are allowed to handle it. As usual the kernel has
index e5213bc301f721a1c3236a4469194982c9653865..511b4230c0536add9d0650cbc1f702becc2e54e2 100644 (file)
@@ -26,6 +26,20 @@ The following mount options are supported:
        nostrict        Unset strict conformance
        iocharset=      Set the NLS character set
 
+The uid= and gid= options need a bit more explaining.  They will accept a
+decimal numeric value which will be used as the default ID for that mount.
+They will also accept the string "ignore" and "forget".  For files on the disk
+that are owned by nobody ( -1 ), they will instead look as if they are owned
+by the default ID.  The ignore option causes the default ID to override all
+IDs on the disk, not just -1.  The forget option causes all IDs to be written
+to disk as -1, so when the media is later remounted, they will appear to be
+owned by whatever default ID it is mounted with at that time.
+
+For typical desktop use of removable media, you should set the ID to that
+of the interactively logged on user, and also specify both the forget and
+ignore options.  This way the interactive user will always see the files
+on the disk as belonging to him.
+
 The remaining are for debugging and disaster recovery:
 
        novrs           Skip volume sequence recognition 
index e56e842847d3ee3e48c79b4099bc0d6040d730a1..adaa899e5c903763a4f0938efedd1bd3bbdce4a0 100644 (file)
@@ -230,10 +230,15 @@ only called from a process context (i.e. not from an interrupt handler
 or bottom half).
 
   alloc_inode: this method is called by inode_alloc() to allocate memory
-       for struct inode and initialize it.
+       for struct inode and initialize it.  If this function is not
+       defined, a simple 'struct inode' is allocated.  Normally
+       alloc_inode will be used to allocate a larger structure which
+       contains a 'struct inode' embedded within it.
 
   destroy_inode: this method is called by destroy_inode() to release
-       resources allocated for struct inode.
+       resources allocated for struct inode.  It is only required if
+       ->alloc_inode was defined and simply undoes anything done by
+       ->alloc_inode.
 
   read_inode: this method is called to read a specific inode from the
         mounted filesystem.  The i_ino member in the struct inode is
@@ -443,14 +448,81 @@ otherwise noted.
 The Address Space Object
 ========================
 
-The address space object is used to identify pages in the page cache.
-
+The address space object is used to group and manage pages in the page
+cache.  It can be used to keep track of the pages in a file (or
+anything else) and also track the mapping of sections of the file into
+process address spaces.
+
+There are a number of distinct yet related services that an
+address-space can provide.  These include communicating memory
+pressure, page lookup by address, and keeping track of pages tagged as
+Dirty or Writeback.
+
+The first can be used independently to the others.  The VM can try to
+either write dirty pages in order to clean them, or release clean
+pages in order to reuse them.  To do this it can call the ->writepage
+method on dirty pages, and ->releasepage on clean pages with
+PagePrivate set. Clean pages without PagePrivate and with no external
+references will be released without notice being given to the
+address_space.
+
+To achieve this functionality, pages need to be placed on an LRU with
+lru_cache_add and mark_page_active needs to be called whenever the
+page is used.
+
+Pages are normally kept in a radix tree index by ->index. This tree
+maintains information about the PG_Dirty and PG_Writeback status of
+each page, so that pages with either of these flags can be found
+quickly.
+
+The Dirty tag is primarily used by mpage_writepages - the default
+->writepages method.  It uses the tag to find dirty pages to call
+->writepage on.  If mpage_writepages is not used (i.e. the address
+provides its own ->writepages) , the PAGECACHE_TAG_DIRTY tag is
+almost unused.  write_inode_now and sync_inode do use it (through
+__sync_single_inode) to check if ->writepages has been successful in
+writing out the whole address_space.
+
+The Writeback tag is used by filemap*wait* and sync_page* functions,
+via wait_on_page_writeback_range, to wait for all writeback to
+complete.  While waiting ->sync_page (if defined) will be called on
+each page that is found to require writeback.
+
+An address_space handler may attach extra information to a page,
+typically using the 'private' field in the 'struct page'.  If such
+information is attached, the PG_Private flag should be set.  This will
+cause various VM routines to make extra calls into the address_space
+handler to deal with that data.
+
+An address space acts as an intermediate between storage and
+application.  Data is read into the address space a whole page at a
+time, and provided to the application either by copying of the page,
+or by memory-mapping the page.
+Data is written into the address space by the application, and then
+written-back to storage typically in whole pages, however the
+address_space has finer control of write sizes.
+
+The read process essentially only requires 'readpage'.  The write
+process is more complicated and uses prepare_write/commit_write or
+set_page_dirty to write data into the address_space, and writepage,
+sync_page, and writepages to writeback data to storage.
+
+Adding and removing pages to/from an address_space is protected by the
+inode's i_mutex.
+
+When data is written to a page, the PG_Dirty flag should be set.  It
+typically remains set until writepage asks for it to be written.  This
+should clear PG_Dirty and set PG_Writeback.  It can be actually
+written at any point after PG_Dirty is clear.  Once it is known to be
+safe, PG_Writeback is cleared.
+
+Writeback makes use of a writeback_control structure...
 
 struct address_space_operations
 -------------------------------
 
 This describes how the VFS can manipulate mapping of a file to page cache in
-your filesystem. As of kernel 2.6.13, the following members are defined:
+your filesystem. As of kernel 2.6.16, the following members are defined:
 
 struct address_space_operations {
        int (*writepage)(struct page *page, struct writeback_control *wbc);
@@ -469,47 +541,148 @@ struct address_space_operations {
                        loff_t offset, unsigned long nr_segs);
        struct page* (*get_xip_page)(struct address_space *, sector_t,
                        int);
+       /* migrate the contents of a page to the specified target */
+       int (*migratepage) (struct page *, struct page *);
 };
 
-  writepage: called by the VM write a dirty page to backing store.
+  writepage: called by the VM to write a dirty page to backing store.
+      This may happen for data integrity reasons (i.e. 'sync'), or
+      to free up memory (flush).  The difference can be seen in
+      wbc->sync_mode.
+      The PG_Dirty flag has been cleared and PageLocked is true.
+      writepage should start writeout, should set PG_Writeback,
+      and should make sure the page is unlocked, either synchronously
+      or asynchronously when the write operation completes.
+
+      If wbc->sync_mode is WB_SYNC_NONE, ->writepage doesn't have to
+      try too hard if there are problems, and may choose to write out
+      other pages from the mapping if that is easier (e.g. due to
+      internal dependencies).  If it chooses not to start writeout, it
+      should return AOP_WRITEPAGE_ACTIVATE so that the VM will not keep
+      calling ->writepage on that page.
+
+      See the file "Locking" for more details.
 
   readpage: called by the VM to read a page from backing store.
+       The page will be Locked when readpage is called, and should be
+       unlocked and marked uptodate once the read completes.
+       If ->readpage discovers that it needs to unlock the page for
+       some reason, it can do so, and then return AOP_TRUNCATED_PAGE.
+       In this case, the page will be relocated, relocked and if
+       that all succeeds, ->readpage will be called again.
 
   sync_page: called by the VM to notify the backing store to perform all
        queued I/O operations for a page. I/O operations for other pages
        associated with this address_space object may also be performed.
 
+       This function is optional and is called only for pages with
+       PG_Writeback set while waiting for the writeback to complete.
+
   writepages: called by the VM to write out pages associated with the
-       address_space object.
+       address_space object.  If wbc->sync_mode is WBC_SYNC_ALL, then
+       the writeback_control will specify a range of pages that must be
+       written out.  If it is WBC_SYNC_NONE, then a nr_to_write is given
+       and that many pages should be written if possible.
+       If no ->writepages is given, then mpage_writepages is used
+       instead.  This will choose pages from the address space that are
+       tagged as DIRTY and will pass them to ->writepage.
 
   set_page_dirty: called by the VM to set a page dirty.
+        This is particularly needed if an address space attaches
+        private data to a page, and that data needs to be updated when
+        a page is dirtied.  This is called, for example, when a memory
+       mapped page gets modified.
+       If defined, it should set the PageDirty flag, and the
+        PAGECACHE_TAG_DIRTY tag in the radix tree.
 
   readpages: called by the VM to read pages associated with the address_space
-       object.
+       object. This is essentially just a vector version of
+       readpage.  Instead of just one page, several pages are
+       requested.
+       readpages is only used for read-ahead, so read errors are
+       ignored.  If anything goes wrong, feel free to give up.
 
   prepare_write: called by the generic write path in VM to set up a write
-       request for a page.
-
-  commit_write: called by the generic write path in VM to write page to
-       its backing store.
+       request for a page.  This indicates to the address space that
+       the given range of bytes is about to be written.  The
+       address_space should check that the write will be able to
+       complete, by allocating space if necessary and doing any other
+       internal housekeeping.  If the write will update parts of
+       any basic-blocks on storage, then those blocks should be
+       pre-read (if they haven't been read already) so that the
+       updated blocks can be written out properly.
+       The page will be locked.  If prepare_write wants to unlock the
+       page it, like readpage, may do so and return
+       AOP_TRUNCATED_PAGE.
+       In this case the prepare_write will be retried one the lock is
+       regained.
+
+  commit_write: If prepare_write succeeds, new data will be copied
+        into the page and then commit_write will be called.  It will
+        typically update the size of the file (if appropriate) and
+        mark the inode as dirty, and do any other related housekeeping
+        operations.  It should avoid returning an error if possible -
+        errors should have been handled by prepare_write.
 
   bmap: called by the VFS to map a logical block offset within object to
-       physical block number. This method is use by for the legacy FIBMAP
-       ioctl. Other uses are discouraged.
-
-  invalidatepage: called by the VM on truncate to disassociate a page from its
-       address_space mapping.
-
-  releasepage: called by the VFS to release filesystem specific metadata from
-       a page.
-
-  direct_IO: called by the VM for direct I/O writes and reads.
+       physical block number. This method is used by the FIBMAP
+       ioctl and for working with swap-files.  To be able to swap to
+       a file, the file must have a stable mapping to a block
+       device.  The swap system does not go through the filesystem
+       but instead uses bmap to find out where the blocks in the file
+       are and uses those addresses directly.
+
+
+  invalidatepage: If a page has PagePrivate set, then invalidatepage
+        will be called when part or all of the page is to be removed
+       from the address space.  This generally corresponds to either a
+       truncation or a complete invalidation of the address space
+       (in the latter case 'offset' will always be 0).
+       Any private data associated with the page should be updated
+       to reflect this truncation.  If offset is 0, then
+       the private data should be released, because the page
+       must be able to be completely discarded.  This may be done by
+        calling the ->releasepage function, but in this case the
+        release MUST succeed.
+
+  releasepage: releasepage is called on PagePrivate pages to indicate
+        that the page should be freed if possible.  ->releasepage
+        should remove any private data from the page and clear the
+        PagePrivate flag.  It may also remove the page from the
+        address_space.  If this fails for some reason, it may indicate
+        failure with a 0 return value.
+       This is used in two distinct though related cases.  The first
+        is when the VM finds a clean page with no active users and
+        wants to make it a free page.  If ->releasepage succeeds, the
+        page will be removed from the address_space and become free.
+
+       The second case if when a request has been made to invalidate
+        some or all pages in an address_space.  This can happen
+        through the fadvice(POSIX_FADV_DONTNEED) system call or by the
+        filesystem explicitly requesting it as nfs and 9fs do (when
+        they believe the cache may be out of date with storage) by
+        calling invalidate_inode_pages2().
+       If the filesystem makes such a call, and needs to be certain
+        that all pages are invalidated, then its releasepage will
+        need to ensure this.  Possibly it can clear the PageUptodate
+        bit if it cannot free private data yet.
+
+  direct_IO: called by the generic read/write routines to perform
+        direct_IO - that is IO requests which bypass the page cache
+        and transfer data directly between the storage and the
+        application's address space.
 
   get_xip_page: called by the VM to translate a block number to a page.
        The page is valid until the corresponding filesystem is unmounted.
        Filesystems that want to use execute-in-place (XIP) need to implement
        it.  An example implementation can be found in fs/ext2/xip.c.
 
+  migrate_page:  This is used to compact the physical memory usage.
+        If the VM wants to relocate a page (maybe off a memory card
+        that is signalling imminent failure) it will pass a new page
+       and an old page to this function.  migrate_page should
+       transfer any private data across and update any references
+        that it has to the page.
 
 The File Object
 ===============
index d3ad2c24490aa4361ad83d841aca57607f83e5db..ad3edaba4533cf33d5452e5b4bb877455000c05b 100644 (file)
@@ -23,7 +23,6 @@ char __init inkernel_firmware[] = "let's say that this is firmware\n";
 #endif
 
 static struct device ghost_device = {
-       .name      = "Ghost Device",
        .bus_id    = "ghost0",
 };
 
@@ -92,7 +91,7 @@ static void sample_probe_async(void)
 {
        /* Let's say that I can't sleep */
        int error;
-       error = request_firmware_nowait (THIS_MODULE,
+       error = request_firmware_nowait (THIS_MODULE, FW_ACTION_NOHOTPLUG,
                                         "sample_driver_fw", &ghost_device,
                                         "my device pointer",
                                         sample_probe_async_cont);
index 57b956aecbc52c0d4c7402611edc83304870dad0..9e1b0e4051cd0546985b9985fd308d301d537c41 100644 (file)
@@ -172,7 +172,6 @@ static void fw_remove_class_device(struct class_device *class_dev)
 static struct class_device *class_dev;
 
 static struct device my_device = {
-       .name      = "Sample Device",
        .bus_id    = "my_dev0",
 };
 
index 443230b43e092804b7573a16619e4b668803d864..a9c00facdf401103a2ef7cb1301694c34a49432d 100644 (file)
@@ -17,6 +17,7 @@ This document describes the Linux kernel Makefiles.
           --- 3.8 Command line dependency
           --- 3.9 Dependency tracking
           --- 3.10 Special Rules
+          --- 3.11 $(CC) support functions
 
        === 4 Host Program support
           --- 4.1 Simple Host Program
@@ -38,7 +39,6 @@ This document describes the Linux kernel Makefiles.
           --- 6.6 Commands useful for building a boot image
           --- 6.7 Custom kbuild commands
           --- 6.8 Preprocessing linker scripts
-          --- 6.9 $(CC) support functions
 
        === 7 Kbuild Variables
        === 8 Makefile language
@@ -106,9 +106,9 @@ This document is aimed towards normal developers and arch developers.
 Most Makefiles within the kernel are kbuild Makefiles that use the
 kbuild infrastructure. This chapter introduce the syntax used in the
 kbuild makefiles.
-The preferred name for the kbuild files is 'Kbuild' but 'Makefile' will
-continue to be supported. All new developmen is expected to use the
-Kbuild filename.
+The preferred name for the kbuild files are 'Makefile' but 'Kbuild' can
+be used and if both a 'Makefile' and a 'Kbuild' file exists then the 'Kbuild'
+file will be used.
 
 Section 3.1 "Goal definitions" is a quick intro, further chapters provide
 more details, with real examples.
@@ -385,6 +385,102 @@ more details, with real examples.
        to prerequisites are referenced with $(src) (because they are not
        generated files).
 
+--- 3.11 $(CC) support functions
+
+       The kernel may be build with several different versions of
+       $(CC), each supporting a unique set of features and options.
+       kbuild provide basic support to check for valid options for $(CC).
+       $(CC) is useally the gcc compiler, but other alternatives are
+       available.
+
+    as-option
+       as-option is used to check if $(CC) when used to compile
+       assembler (*.S) files supports the given option. An optional
+       second option may be specified if first option are not supported.
+
+       Example:
+               #arch/sh/Makefile
+               cflags-y += $(call as-option,-Wa$(comma)-isa=$(isa-y),)
+
+       In the above example cflags-y will be assinged the the option
+       -Wa$(comma)-isa=$(isa-y) if it is supported by $(CC).
+       The second argument is optional, and if supplied will be used
+       if first argument is not supported.
+
+    cc-option
+       cc-option is used to check if $(CC) support a given option, and not
+       supported to use an optional second option.
+
+       Example:
+               #arch/i386/Makefile
+               cflags-y += $(call cc-option,-march=pentium-mmx,-march=i586)
+
+       In the above example cflags-y will be assigned the option
+       -march=pentium-mmx if supported by $(CC), otherwise -march-i586.
+       The second argument to cc-option is optional, and if omitted
+       cflags-y will be assigned no value if first option is not supported.
+
+   cc-option-yn
+       cc-option-yn is used to check if gcc supports a given option
+       and return 'y' if supported, otherwise 'n'.
+
+       Example:
+               #arch/ppc/Makefile
+               biarch := $(call cc-option-yn, -m32)
+               aflags-$(biarch) += -a32
+               cflags-$(biarch) += -m32
+       
+       In the above example $(biarch) is set to y if $(CC) supports the -m32
+       option. When $(biarch) equals to y the expanded variables $(aflags-y)
+       and $(cflags-y) will be assigned the values -a32 and -m32.
+
+    cc-option-align
+       gcc version >= 3.0 shifted type of options used to speify
+       alignment of functions, loops etc. $(cc-option-align) whrn used
+       as prefix to the align options will select the right prefix:
+       gcc < 3.00
+               cc-option-align = -malign
+       gcc >= 3.00
+               cc-option-align = -falign
+       
+       Example:
+               CFLAGS += $(cc-option-align)-functions=4
+
+       In the above example the option -falign-functions=4 is used for
+       gcc >= 3.00. For gcc < 3.00 -malign-functions=4 is used.
+       
+    cc-version
+       cc-version return a numerical version of the $(CC) compiler version.
+       The format is <major><minor> where both are two digits. So for example
+       gcc 3.41 would return 0341.
+       cc-version is useful when a specific $(CC) version is faulty in one
+       area, for example the -mregparm=3 were broken in some gcc version
+       even though the option was accepted by gcc.
+
+       Example:
+               #arch/i386/Makefile
+               cflags-y += $(shell \
+               if [ $(call cc-version) -ge 0300 ] ; then \
+                       echo "-mregparm=3"; fi ;)
+
+       In the above example -mregparm=3 is only used for gcc version greater
+       than or equal to gcc 3.0.
+
+    cc-ifversion
+       cc-ifversion test the version of $(CC) and equals last argument if
+       version expression is true.
+
+       Example:
+               #fs/reiserfs/Makefile
+               EXTRA_CFLAGS := $(call cc-ifversion, -lt, 0402, -O1)
+
+       In this example EXTRA_CFLAGS will be assigned the value -O1 if the
+       $(CC) version is less than 4.2.
+       cc-ifversion takes all the shell operators: 
+       -eq, -ne, -lt, -le, -gt, and -ge
+       The third parameter may be a text as in this example, but it may also
+       be an expanded variable or a macro.
+
 
 === 4 Host Program support
 
@@ -973,74 +1069,6 @@ When kbuild executes the following steps are followed (roughly):
        architecture specific files.
 
 
---- 6.9 $(CC) support functions
-
-       The kernel may be build with several different versions of
-       $(CC), each supporting a unique set of features and options.
-       kbuild provide basic support to check for valid options for $(CC).
-       $(CC) is useally the gcc compiler, but other alternatives are
-       available.
-
-    cc-option
-       cc-option is used to check if $(CC) support a given option, and not
-       supported to use an optional second option.
-
-       Example:
-               #arch/i386/Makefile
-               cflags-y += $(call cc-option,-march=pentium-mmx,-march=i586)
-
-       In the above example cflags-y will be assigned the option
-       -march=pentium-mmx if supported by $(CC), otherwise -march-i586.
-       The second argument to cc-option is optional, and if omitted
-       cflags-y will be assigned no value if first option is not supported.
-
-   cc-option-yn
-       cc-option-yn is used to check if gcc supports a given option
-       and return 'y' if supported, otherwise 'n'.
-
-       Example:
-               #arch/ppc/Makefile
-               biarch := $(call cc-option-yn, -m32)
-               aflags-$(biarch) += -a32
-               cflags-$(biarch) += -m32
-       
-       In the above example $(biarch) is set to y if $(CC) supports the -m32
-       option. When $(biarch) equals to y the expanded variables $(aflags-y)
-       and $(cflags-y) will be assigned the values -a32 and -m32.
-
-    cc-option-align
-       gcc version >= 3.0 shifted type of options used to speify
-       alignment of functions, loops etc. $(cc-option-align) whrn used
-       as prefix to the align options will select the right prefix:
-       gcc < 3.00
-               cc-option-align = -malign
-       gcc >= 3.00
-               cc-option-align = -falign
-       
-       Example:
-               CFLAGS += $(cc-option-align)-functions=4
-
-       In the above example the option -falign-functions=4 is used for
-       gcc >= 3.00. For gcc < 3.00 -malign-functions=4 is used.
-       
-    cc-version
-       cc-version return a numerical version of the $(CC) compiler version.
-       The format is <major><minor> where both are two digits. So for example
-       gcc 3.41 would return 0341.
-       cc-version is useful when a specific $(CC) version is faulty in one
-       area, for example the -mregparm=3 were broken in some gcc version
-       even though the option was accepted by gcc.
-
-       Example:
-               #arch/i386/Makefile
-               cflags-y += $(shell \
-               if [ $(call cc-version) -ge 0300 ] ; then \
-                       echo "-mregparm=3"; fi ;)
-
-       In the above example -mregparm=3 is only used for gcc version greater
-       than or equal to gcc 3.0.
-       
-
 === 7 Kbuild Variables
 
 The top Makefile exports the following variables:
index 7e77f93634ea507569e3554434fe7978767d7fba..fcccf2432f98ff48d8d87b040c92e9ab5a8ef01a 100644 (file)
@@ -13,6 +13,7 @@ In this document you will find information about:
           --- 2.2 Available targets
           --- 2.3 Available options
           --- 2.4 Preparing the kernel tree for module build
+          --- 2.5 Building separate files for a module
        === 3. Example commands
        === 4. Creating a kbuild file for an external module
        === 5. Include files
@@ -22,7 +23,10 @@ In this document you will find information about:
        === 6. Module installation
           --- 6.1 INSTALL_MOD_PATH
           --- 6.2 INSTALL_MOD_DIR
-       === 7. Module versioning
+       === 7. Module versioning & Module.symvers
+          --- 7.1 Symbols fron the kernel (vmlinux + modules)
+          --- 7.2 Symbols and external modules
+          --- 7.3 Symbols from another external module
        === 8. Tips & Tricks
           --- 8.1 Testing for CONFIG_FOO_BAR
 
@@ -88,7 +92,8 @@ when building an external module.
        make -C $KDIR M=$PWD modules_install
                Install the external module(s).
                Installation default is in /lib/modules/<kernel-version>/extra,
-               but may be prefixed with INSTALL_MOD_PATH - see separate chapter.
+               but may be prefixed with INSTALL_MOD_PATH - see separate
+               chapter.
 
        make -C $KDIR M=$PWD clean
                Remove all generated files for the module - the kernel
@@ -131,6 +136,16 @@ when building an external module.
              Therefore a full kernel build needs to be executed to make
              module versioning work.
 
+--- 2.5 Building separate files for a module
+       It is possible to build single files which is part of a module.
+       This works equal for the kernel, a module and even for external
+       modules.
+       Examples (module foo.ko, consist of bar.o, baz.o):
+               make -C $KDIR M=`pwd` bar.lst
+               make -C $KDIR M=`pwd` bar.o
+               make -C $KDIR M=`pwd` foo.ko
+               make -C $KDIR M=`pwd` /
+       
 
 === 3. Example commands
 
@@ -422,7 +437,7 @@ External modules are installed in the directory:
                => Install dir: /lib/modules/$(KERNELRELEASE)/gandalf
 
 
-=== 7. Module versioning
+=== 7. Module versioning & Module.symvers
 
 Module versioning is enabled by the CONFIG_MODVERSIONS tag.
 
@@ -432,11 +447,80 @@ when a module is loaded/used then the CRC values contained in the kernel are
 compared with similar values in the module. If they are not equal then the
 kernel refuses to load the module.
 
-During a kernel build a file named Module.symvers will be generated. This
-file includes the symbol version of all symbols within the kernel. If the 
-Module.symvers file is saved from the last full kernel compile one does not
-have to do a full kernel compile to build a module version's compatible module.
+Module.symvers contains a list of all exported symbols from a kernel build.
+
+--- 7.1 Symbols fron the kernel (vmlinux + modules)
+
+       During a kernel build a file named Module.symvers will be generated.
+       Module.symvers contains all exported symbols from the kernel and
+       compiled modules. For each symbols the corresponding CRC value
+       is stored too.
+
+       The syntax of the Module.symvers file is:
+               <CRC>       <Symbol>           <module>
+       Sample:
+               0x2d036834  scsi_remove_host   drivers/scsi/scsi_mod
 
+       For a kernel build without CONFIG_MODVERSIONING enabled the crc
+       would read: 0x00000000
+
+       Module.symvers serve two purposes.
+       1) It list all exported symbols both from vmlinux and all modules
+       2) It list CRC if CONFIG_MODVERSION is enabled
+
+--- 7.2 Symbols and external modules
+
+       When building an external module the build system needs access to
+       the symbols from the kernel to check if all external symbols are
+       defined. This is done in the MODPOST step and to obtain all
+       symbols modpost reads Module.symvers from the kernel.
+       If a Module.symvers file is present in the directory where
+       the external module is being build this file will be read too.
+       During the MODPOST step a new Module.symvers file will be written
+       containing all exported symbols that was not defined in the kernel.
+       
+--- 7.3 Symbols from another external module
+
+       Sometimes one external module uses exported symbols from another
+       external module. Kbuild needs to have full knowledge on all symbols
+       to avoid spitting out warnings about undefined symbols.
+       Two solutions exist to let kbuild know all symbols of more than
+       one external module.
+       The method with a top-level kbuild file is recommended but may be
+       impractical in certain situations.
+
+       Use a top-level Kbuild file
+               If you have two modules: 'foo', 'bar' and 'foo' needs symbols
+               from 'bar' then one can use a common top-level kbuild file so
+               both modules are compiled in same build.
+
+               Consider following directory layout:
+               ./foo/ <= contains the foo module
+               ./bar/ <= contains the bar module
+               The top-level Kbuild file would then look like:
+               
+               #./Kbuild: (this file may also be named Makefile)
+                       obj-y := foo/ bar/
+
+               Executing:
+                       make -C $KDIR M=`pwd`
+
+               will then do the expected and compile both modules with full
+               knowledge on symbols from both modules.
+
+       Use an extra Module.symvers file
+               When an external module is build a Module.symvers file is
+               generated containing all exported symbols which are not
+               defined in the kernel.
+               To get access to symbols from module 'bar' one can copy the
+               Module.symvers file from the compilation of the 'bar' module
+               to the directory where the 'foo' module is build.
+               During the module build kbuild will read the Module.symvers
+               file in the directory of the external module and when the
+               build is finished a new Module.symvers file is created
+               containing the sum of all symbols defined and not part of the
+               kernel.
+               
 === 8. Tips & Tricks
 
 --- 8.1 Testing for CONFIG_FOO_BAR
index 44a25f3f51d11cf5977c0542c1db71d4b501b75d..f8cb55c30b0fb4d3c8a9931d15c0eedb13684b46 100644 (file)
@@ -367,12 +367,17 @@ running once the system is up.
                tty<n>  Use the virtual console device <n>.
 
                ttyS<n>[,options]
+               ttyUSB0[,options]
                        Use the specified serial port.  The options are of
-                       the form "bbbbpn", where "bbbb" is the baud rate,
-