/ {
compatible = "snps,nsimosci";
- clock-frequency = <80000000>; /* 80 MHZ */
+ clock-frequency = <20000000>; /* 20 MHZ */
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&intc>;
chosen {
- bootargs = "console=tty0 consoleblank=0";
+ /* this is for console on PGU */
+ /* bootargs = "console=tty0 consoleblank=0"; */
+ /* this is for console on serial */
+ bootargs = "earlycon=uart8250,mmio32,0xc0000000,115200n8 console=ttyS0,115200n8 consoleblank=0 debug";
};
aliases {
};
uart0: serial@c0000000 {
- compatible = "snps,dw-apb-uart";
+ compatible = "ns8250";
reg = <0xc0000000 0x2000>;
interrupts = <11>;
- #clock-frequency = <80000000>;
clock-frequency = <3686400>;
baud = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
- status = "okay";
+ no-loopback-test = <1>;
};
pgu0: pgu@c9000000 {
+++ /dev/null
-/*
- * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-/include/ "skeleton.dtsi"
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
# CONFIG_HW_RANDOM is not set
#define ASM_NL ` /* use '`' to mark new line in macro */
-/* Can't use the ENTRY macro in linux/linkage.h
- * gas considers ';' as comment vs. newline
- */
-.macro ARC_ENTRY name
- .global \name
- .align 4
- \name:
-.endm
-
-.macro ARC_EXIT name
-#define ASM_PREV_SYM_ADDR(name) .-##name
- .size \ name, ASM_PREV_SYM_ADDR(\name)
-.endm
-
/* annotation for data we want in DCCM - if enabled in .config */
.macro ARCFP_DATA nm
#ifdef CONFIG_ARC_HAS_DCCM
ld.ab blink, [sp, 4]
j [blink]
-ARC_EXIT __switch_to
+END(__switch_to)
VECTOR reserved ; Reserved Exceptions
.endr
-#include <linux/linkage.h> /* ARC_{EXTRY,EXIT} */
+#include <linux/linkage.h> /* {EXTRY,EXIT} */
#include <asm/entry.h> /* SAVE_ALL_{INT1,INT2,SYS...} */
#include <asm/errno.h>
#include <asm/arcregs.h>
; ---------------------------------------------
; Level 2 ISR: Can interrupt a Level 1 ISR
; ---------------------------------------------
-ARC_ENTRY handle_interrupt_level2
+ENTRY(handle_interrupt_level2)
; TODO-vineetg for SMP this wont work
; free up r9 as scratchpad
b ret_from_exception
-ARC_EXIT handle_interrupt_level2
+END(handle_interrupt_level2)
#endif
; ---------------------------------------------
; Level 1 ISR
; ---------------------------------------------
-ARC_ENTRY handle_interrupt_level1
+ENTRY(handle_interrupt_level1)
/* free up r9 as scratchpad */
#ifdef CONFIG_SMP
sr r8, [AUX_IRQ_LV12] ; clear bit in Sticky Status Reg
b ret_from_exception
-ARC_EXIT handle_interrupt_level1
+END(handle_interrupt_level1)
;################### Non TLB Exception Handling #############################
; Instruction Error Exception Handler
; ---------------------------------------------
-ARC_ENTRY instr_service
+ENTRY(instr_service)
EXCEPTION_PROLOGUE
bl do_insterror_or_kprobe
b ret_from_exception
-ARC_EXIT instr_service
+END(instr_service)
; ---------------------------------------------
; Memory Error Exception Handler
; ---------------------------------------------
-ARC_ENTRY mem_service
+ENTRY(mem_service)
EXCEPTION_PROLOGUE
bl do_memory_error
b ret_from_exception
-ARC_EXIT mem_service
+END(mem_service)
; ---------------------------------------------
; Machine Check Exception Handler
; ---------------------------------------------
-ARC_ENTRY EV_MachineCheck
+ENTRY(EV_MachineCheck)
EXCEPTION_PROLOGUE
j do_machine_check_fault
-ARC_EXIT EV_MachineCheck
+END(EV_MachineCheck)
; ---------------------------------------------
; Protection Violation Exception Handler
; ---------------------------------------------
-ARC_ENTRY EV_TLBProtV
+ENTRY(EV_TLBProtV)
EXCEPTION_PROLOGUE
b ret_from_exception
-ARC_EXIT EV_TLBProtV
+END(EV_TLBProtV)
; ---------------------------------------------
; Privilege Violation Exception Handler
; ---------------------------------------------
-ARC_ENTRY EV_PrivilegeV
+ENTRY(EV_PrivilegeV)
EXCEPTION_PROLOGUE
bl do_privilege_fault
b ret_from_exception
-ARC_EXIT EV_PrivilegeV
+END(EV_PrivilegeV)
; ---------------------------------------------
; Extension Instruction Exception Handler
; ---------------------------------------------
-ARC_ENTRY EV_Extension
+ENTRY(EV_Extension)
EXCEPTION_PROLOGUE
bl do_extension_fault
b ret_from_exception
-ARC_EXIT EV_Extension
+END(EV_Extension)
;######################### System Call Tracing #########################
; (2) Break Points
;------------------------------------------------------------------
-ARC_ENTRY EV_Trap
+ENTRY(EV_Trap)
EXCEPTION_PROLOGUE
jl [r9] ; Entry into Sys Call Handler
; fall through to ret_from_system_call
-ARC_EXIT EV_Trap
+END(EV_Trap)
-ARC_ENTRY ret_from_system_call
+ENTRY(ret_from_system_call)
st r0, [sp, PT_r0] ; sys call return value in pt_regs
;
; If ret to user mode do we need to handle signals, schedule() et al.
-ARC_ENTRY ret_from_exception
+ENTRY(ret_from_exception)
; Pre-{IRQ,Trap,Exception} K/U mode from pt_regs->status32
ld r8, [sp, PT_status32] ; returning to User/Kernel Mode
debug_marker_syscall:
rtie
-ARC_EXIT ret_from_exception
+END(ret_from_exception)
-ARC_ENTRY ret_from_fork
+ENTRY(ret_from_fork)
; when the forked child comes here from the __switch_to function
; r0 has the last task pointer.
; put last task in scheduler queue
; special case of kernel_thread entry point returning back due to
; kernel_execve() - pretend return from syscall to ret to userland
b ret_from_exception
-ARC_EXIT ret_from_fork
+END(ret_from_fork)
;################### Special Sys Call Wrappers ##########################
-ARC_ENTRY sys_clone_wrapper
+ENTRY(sys_clone_wrapper)
SAVE_CALLEE_SAVED_USER
bl @sys_clone
DISCARD_CALLEE_SAVED_USER
bnz tracesys_exit
b ret_from_system_call
-ARC_EXIT sys_clone_wrapper
+END(sys_clone_wrapper)
#ifdef CONFIG_ARC_DW2_UNWIND
; Workaround for bug 94179 (STAR ):
.globl stext
stext:
;-------------------------------------------------------------------
- ; Don't clobber r0-r4 yet. It might have bootloader provided info
+ ; Don't clobber r0-r2 yet. It might have bootloader provided info
;-------------------------------------------------------------------
sr @_int_vec_base_lds, [AUX_INTR_VEC_BASE]
#ifdef CONFIG_SMP
- ; Only Boot (Master) proceeds. Others wait in platform dependent way
+ ; Ensure Boot (Master) proceeds. Others wait in platform dependent way
; IDENTITY Reg [ 3 2 1 0 ]
; (cpu-id) ^^^ => Zero for UP ARC700
; => #Core-ID if SMP (Master 0)
; need to make sure only boot cpu takes this path.
GET_CPU_ID r5
cmp r5, 0
- jnz arc_platform_smp_wait_to_boot
+ mov.ne r0, r5
+ jne arc_platform_smp_wait_to_boot
#endif
; Clear BSS before updating any globals
; XXX: use ZOL here
write_aux_reg(ARC_REG_TIMER0_CTRL, TIMER_CTRL_IE | TIMER_CTRL_NH);
}
-/*
- * Acknowledge the interrupt (oneshot) and optionally re-arm it (periodic)
- * -Any write to CTRL Reg will ack the intr (NH bit: Count when not halted)
- * -Rearming is done by setting the IE bit
- *
- * Small optimisation: Normal code would have been
- * if (irq_reenable)
- * CTRL_REG = (IE | NH);
- * else
- * CTRL_REG = NH;
- * However since IE is BIT0 we can fold the branch
- */
-static void arc_timer_event_ack(unsigned int irq_reenable)
-{
- write_aux_reg(ARC_REG_TIMER0_CTRL, irq_reenable | TIMER_CTRL_NH);
-}
static int arc_clkevent_set_next_event(unsigned long delta,
struct clock_event_device *dev)
static irqreturn_t timer_irq_handler(int irq, void *dev_id)
{
- struct clock_event_device *clk = this_cpu_ptr(&arc_clockevent_device);
+ /*
+ * Note that generic IRQ core could have passed @evt for @dev_id if
+ * irq_set_chip_and_handler() asked for handle_percpu_devid_irq()
+ */
+ struct clock_event_device *evt = this_cpu_ptr(&arc_clockevent_device);
+ int irq_reenable = evt->mode == CLOCK_EVT_MODE_PERIODIC;
+
+ /*
+ * Any write to CTRL reg ACks the interrupt, we rewrite the
+ * Count when [N]ot [H]alted bit.
+ * And re-arm it if perioid by [I]nterrupt [E]nable bit
+ */
+ write_aux_reg(ARC_REG_TIMER0_CTRL, irq_reenable | TIMER_CTRL_NH);
+
+ evt->event_handler(evt);
- arc_timer_event_ack(clk->mode == CLOCK_EVT_MODE_PERIODIC);
- clk->event_handler(clk);
return IRQ_HANDLED;
}
/*
* Setup the local event timer for @cpu
- * N.B. weak so that some exotic ARC SoCs can completely override it
*/
-void __weak arc_local_timer_setup(unsigned int cpu)
+void arc_local_timer_setup(unsigned int cpu)
{
struct clock_event_device *clk = &per_cpu(arc_clockevent_device, cpu);
* published by the Free Software Foundation.
*/
-#include <asm/linkage.h>
+#include <linux/linkage.h>
#ifdef __LITTLE_ENDIAN__
#define WORD2 r2
#define SHIFT r2
#endif
-ARC_ENTRY memcmp
+ENTRY(memcmp)
or r12,r0,r1
asl_s r12,r12,30
sub r3,r2,1
.Lnil:
j_s.d [blink]
mov r0,0
-ARC_EXIT memcmp
+END(memcmp)
* published by the Free Software Foundation.
*/
-#include <asm/linkage.h>
+#include <linux/linkage.h>
-ARC_ENTRY memcpy
+ENTRY(memcpy)
or r3,r0,r1
asl_s r3,r3,30
mov_s r5,r0
.Lendbloop:
j_s.d [blink]
stb r12,[r5,0]
-ARC_EXIT memcpy
+END(memcpy)
* published by the Free Software Foundation.
*/
-#include <asm/linkage.h>
+#include <linux/linkage.h>
#define SMALL 7 /* Must be at least 6 to deal with alignment/loop issues. */
-ARC_ENTRY memset
+ENTRY(memset)
mov_s r4,r0
or r12,r0,r2
bmsk.f r12,r12,1
stb.ab r1,[r4,1]
.Ltiny_end:
j_s [blink]
-ARC_EXIT memset
+END(memset)
; memzero: @r0 = mem, @r1 = size_t
; memset: @r0 = mem, @r1 = char, @r2 = size_t
-ARC_ENTRY memzero
+ENTRY(memzero)
; adjust bzero args to memset args
mov r2, r1
mov r1, 0
b memset ;tail call so need to tinker with blink
-ARC_EXIT memzero
+END(memzero)
presence of the norm instruction makes it easier to operate on whole
words branch-free. */
-#include <asm/linkage.h>
+#include <linux/linkage.h>
-ARC_ENTRY strchr
+ENTRY(strchr)
extb_s r1,r1
asl r5,r1,8
bmsk r2,r0,1
j_s.d [blink]
mov.mi r0,0
#endif /* ENDIAN */
-ARC_EXIT strchr
+END(strchr)
source 1; however, that would increase the overhead for loop setup / finish,
and strcmp might often terminate early. */
-#include <asm/linkage.h>
+#include <linux/linkage.h>
-ARC_ENTRY strcmp
+ENTRY(strcmp)
or r2,r0,r1
bmsk_s r2,r2,1
brne r2,0,.Lcharloop
.Lcmpend:
j_s.d [blink]
sub r0,r2,r3
-ARC_EXIT strcmp
+END(strcmp)
there, but the it is not likely to be taken often, and it
would also be likey to cost an unaligned mispredict at the next call. */
-#include <asm/linkage.h>
+#include <linux/linkage.h>
-ARC_ENTRY strcpy
+ENTRY(strcpy)
or r2,r0,r1
bmsk_s r2,r2,1
brne.d r2,0,charloop
brne.d r3,0,charloop
stb.ab r3,[r10,1]
j [blink]
-ARC_EXIT strcpy
+END(strcpy)
* published by the Free Software Foundation.
*/
-#include <asm/linkage.h>
+#include <linux/linkage.h>
-ARC_ENTRY strlen
+ENTRY(strlen)
or r3,r0,7
ld r2,[r3,-7]
ld.a r6,[r3,-3]
.Learly_end:
b.d .Lend
sub_s.ne r1,r1,r1
-ARC_EXIT strlen
+END(strlen)
#define DC_CTRL_INV_MODE_FLUSH 0x40
#define DC_CTRL_FLUSH_STATUS 0x100
-char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len)
+char *arc_cache_mumbojumbo(int c, char *buf, int len)
{
int n = 0;
- unsigned int c = smp_processor_id();
#define PR_CACHE(p, enb, str) \
{ \
#include <linux/mm.h>
#include <linux/bootmem.h>
#include <linux/memblock.h>
+#ifdef CONFIG_BLK_DEV_INITRD
+#include <linux/initrd.h>
+#endif
#include <linux/swap.h>
#include <linux/module.h>
#include <asm/page.h>
pr_info("Memory size set via devicetree %ldM\n", TO_MB(arc_mem_sz));
}
+#ifdef CONFIG_BLK_DEV_INITRD
+static int __init early_initrd(char *p)
+{
+ unsigned long start, size;
+ char *endp;
+
+ start = memparse(p, &endp);
+ if (*endp == ',') {
+ size = memparse(endp + 1, NULL);
+
+ initrd_start = (unsigned long)__va(start);
+ initrd_end = (unsigned long)__va(start + size);
+ }
+ return 0;
+}
+early_param("initrd", early_initrd);
+#endif
+
/*
* First memory setup routine called from setup_arch()
* 1. setup swapper's mm @init_mm
memblock_reserve(CONFIG_LINUX_LINK_BASE,
__pa(_end) - CONFIG_LINUX_LINK_BASE);
+#ifdef CONFIG_BLK_DEV_INITRD
+ /*------------- reserve initrd image -----------------------*/
+ if (initrd_start)
+ memblock_reserve(__pa(initrd_start), initrd_end - initrd_start);
+#endif
+
memblock_dump_all();
/*-------------- node setup --------------------------------*/
; I-TLB Miss Exception Handler
;-----------------------------------------------------------------------------
-ARC_ENTRY EV_TLBMissI
+ENTRY(EV_TLBMissI)
TLBMISS_FREEUP_REGS
TLBMISS_RESTORE_REGS
rtie
-ARC_EXIT EV_TLBMissI
+END(EV_TLBMissI)
;-----------------------------------------------------------------------------
; D-TLB Miss Exception Handler
;-----------------------------------------------------------------------------
-ARC_ENTRY EV_TLBMissD
+ENTRY(EV_TLBMissD)
TLBMISS_FREEUP_REGS
bl do_page_fault
b ret_from_exception
-ARC_EXIT EV_TLBMissD
-
-ARC_ENTRY EV_TLBMissB ; Bogus entry to measure sz of DTLBMiss hdlr
+END(EV_TLBMissD)
bool "ARC SMP Extensions (ISS Models only)"
default n
depends on SMP
- select ARC_HAS_COH_RTSC
help
SMP Extensions to ARC700, in a "simulation only" Model, supported in
ARC ISS (Instruction Set Simulator).
* callback set, by matching the DT compatible name.
*/
-static const char *aa4_compat[] __initdata = {
+static const char *aa4_compat[] __initconst = {
"snps,arc-angel4",
NULL,
};
#endif
MACHINE_END
-static const char *ml509_compat[] __initdata = {
+static const char *ml509_compat[] __initconst = {
"snps,arc-ml509",
NULL,
};
#endif
MACHINE_END
-static const char *nsimosci_compat[] __initdata = {
+static const char *nsimosci_compat[] __initconst = {
"snps,nsimosci",
NULL,
};
git.samba.org / sfrench / cifs-2.6.git / commitdiff