/* XXX: this is missing some actual on-disk truncation.. */
if (ia_valid & ATTR_SIZE)
- error = simple_setsize(inode, attr->ia_size);
-
- if (error)
- goto out;
+ truncate_setsize(inode, attr->ia_size);
if (ia_valid & ATTR_MTIME) {
inode->i_mtime = attr->ia_mtime;
#include <linux/fcntl.h>
#include <linux/security.h>
-/* Taken over from the old code... */
-
-/* POSIX UID/GID verification for setting inode attributes. */
+/**
+ * inode_change_ok - check if attribute changes to an inode are allowed
+ * @inode: inode to check
+ * @attr: attributes to change
+ *
+ * Check if we are allowed to change the attributes contained in @attr
+ * in the given inode. This includes the normal unix access permission
+ * checks, as well as checks for rlimits and others.
+ *
+ * Should be called as the first thing in ->setattr implementations,
+ * possibly after taking additional locks.
+ */
int inode_change_ok(const struct inode *inode, struct iattr *attr)
{
- int retval = -EPERM;
unsigned int ia_valid = attr->ia_valid;
+ /*
+ * First check size constraints. These can't be overriden using
+ * ATTR_FORCE.
+ */
+ if (ia_valid & ATTR_SIZE) {
+ int error = inode_newsize_ok(inode, attr->ia_size);
+ if (error)
+ return error;
+ }
+
/* If force is set do it anyway. */
if (ia_valid & ATTR_FORCE)
- goto fine;
+ return 0;
/* Make sure a caller can chown. */
if ((ia_valid & ATTR_UID) &&
(current_fsuid() != inode->i_uid ||
attr->ia_uid != inode->i_uid) && !capable(CAP_CHOWN))
- goto error;
+ return -EPERM;
/* Make sure caller can chgrp. */
if ((ia_valid & ATTR_GID) &&
(current_fsuid() != inode->i_uid ||
(!in_group_p(attr->ia_gid) && attr->ia_gid != inode->i_gid)) &&
!capable(CAP_CHOWN))
- goto error;
+ return -EPERM;
/* Make sure a caller can chmod. */
if (ia_valid & ATTR_MODE) {
if (!is_owner_or_cap(inode))
- goto error;
+ return -EPERM;
/* Also check the setgid bit! */
if (!in_group_p((ia_valid & ATTR_GID) ? attr->ia_gid :
inode->i_gid) && !capable(CAP_FSETID))
/* Check for setting the inode time. */
if (ia_valid & (ATTR_MTIME_SET | ATTR_ATIME_SET | ATTR_TIMES_SET)) {
if (!is_owner_or_cap(inode))
- goto error;
+ return -EPERM;
}
-fine:
- retval = 0;
-error:
- return retval;
+
+ return 0;
}
EXPORT_SYMBOL(inode_change_ok);
*
* setattr_copy updates the inode's metadata with that specified
* in attr. Noticably missing is inode size update, which is more complex
- * as it requires pagecache updates. See simple_setsize.
+ * as it requires pagecache updates.
*
* The inode is not marked as dirty after this operation. The rationale is
* that for "simple" filesystems, the struct inode is the inode storage.
size_t num_zeros = (PAGE_CACHE_SIZE
- (ia->ia_size & ~PAGE_CACHE_MASK));
+
+ /*
+ * XXX(truncate) this should really happen at the begginning
+ * of ->setattr. But the code is too messy to that as part
+ * of a larger patch. ecryptfs is also totally missing out
+ * on the inode_change_ok check at the beginning of
+ * ->setattr while would include this.
+ */
+ rc = inode_newsize_ok(inode, ia->ia_size);
+ if (rc)
+ goto out;
+
if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) {
- rc = simple_setsize(inode, ia->ia_size);
- if (rc)
- goto out;
+ truncate_setsize(inode, ia->ia_size);
lower_ia->ia_size = ia->ia_size;
lower_ia->ia_valid |= ATTR_SIZE;
goto out;
goto out;
}
}
- simple_setsize(inode, ia->ia_size);
+ truncate_setsize(inode, ia->ia_size);
rc = ecryptfs_write_inode_size_to_metadata(inode);
if (rc) {
printk(KERN_ERR "Problem with "
__ext2_truncate_blocks(inode, offset);
}
-int ext2_setsize(struct inode *inode, loff_t newsize)
+static int ext2_setsize(struct inode *inode, loff_t newsize)
{
- loff_t oldsize;
int error;
- error = inode_newsize_ok(inode, newsize);
- if (error)
- return error;
-
if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
S_ISLNK(inode->i_mode)))
return -EINVAL;
if (error)
return error;
- oldsize = inode->i_size;
- i_size_write(inode, newsize);
- truncate_pagecache(inode, oldsize, newsize);
-
+ truncate_setsize(inode, newsize);
__ext2_truncate_blocks(inode, newsize);
inode->i_mtime = inode->i_ctime = CURRENT_TIME_SEC;
extern const struct file_operations fat_file_operations;
extern const struct inode_operations fat_file_inode_operations;
extern int fat_setattr(struct dentry * dentry, struct iattr * attr);
-extern int fat_setsize(struct inode *inode, loff_t offset);
extern void fat_truncate_blocks(struct inode *inode, loff_t offset);
extern int fat_getattr(struct vfsmount *mnt, struct dentry *dentry,
struct kstat *stat);
return 0;
}
-int fat_setsize(struct inode *inode, loff_t offset)
-{
- int error;
-
- error = simple_setsize(inode, offset);
- if (error)
- return error;
- fat_truncate_blocks(inode, offset);
-
- return error;
-}
-
#define TIMES_SET_FLAGS (ATTR_MTIME_SET | ATTR_ATIME_SET | ATTR_TIMES_SET)
/* valid file mode bits */
#define FAT_VALID_MODE (S_IFREG | S_IFDIR | S_IRWXUGO)
}
if (attr->ia_valid & ATTR_SIZE) {
- error = fat_setsize(inode, attr->ia_size);
- if (error)
- goto out;
+ truncate_setsize(inode, attr->ia_size);
+ fat_truncate_blocks(inode, attr->ia_size);
}
setattr_copy(inode, attr);
if ((attr->ia_valid & ATTR_OPEN) && fc->atomic_o_trunc)
return 0;
- if (attr->ia_valid & ATTR_SIZE) {
- err = inode_newsize_ok(inode, attr->ia_size);
- if (err)
- return err;
+ if (attr->ia_valid & ATTR_SIZE)
is_truncate = true;
- }
req = fuse_get_req(fc);
if (IS_ERR(req))
page_cache_release(page);
/*
- * XXX(hch): the call below should probably be replaced with
+ * XXX(truncate): the call below should probably be replaced with
* a call to the gfs2-specific truncate blocks helper to actually
* release disk blocks..
*/
if (pos + len > ip->i_inode.i_size)
- simple_setsize(&ip->i_inode, ip->i_inode.i_size);
+ truncate_setsize(&ip->i_inode, ip->i_inode.i_size);
out_endtrans:
gfs2_trans_end(sdp);
out_trans_fail:
}
/*
- * XXX: should be changed to have proper ordering by opencoding simple_setsize
+ * XXX(truncate): the truncate_setsize calls should be moved to the end.
*/
static int setattr_size(struct inode *inode, struct iattr *attr)
{
error = gfs2_trans_begin(sdp, 0, sdp->sd_jdesc->jd_blocks);
if (error)
return error;
- error = simple_setsize(inode, attr->ia_size);
+ truncate_setsize(inode, attr->ia_size);
gfs2_trans_end(sdp);
- if (error)
- return error;
}
error = gfs2_truncatei(ip, attr->ia_size);
mutex_unlock(&f->sem);
jffs2_complete_reservation(c);
- /* We have to do the simple_setsize() without f->sem held, since
+ /* We have to do the truncate_setsize() without f->sem held, since
some pages may be locked and waiting for it in readpage().
We are protected from a simultaneous write() extending i_size
back past iattr->ia_size, because do_truncate() holds the
generic inode semaphore. */
if (ivalid & ATTR_SIZE && inode->i_size > iattr->ia_size) {
- simple_setsize(inode, iattr->ia_size);
+ truncate_setsize(inode, iattr->ia_size);
inode->i_blocks = (inode->i_size + 511) >> 9;
}
return 0;
}
-/**
- * simple_setsize - handle core mm and vfs requirements for file size change
- * @inode: inode
- * @newsize: new file size
- *
- * Returns 0 on success, -error on failure.
- *
- * simple_setsize must be called with inode_mutex held.
- *
- * simple_setsize will check that the requested new size is OK (see
- * inode_newsize_ok), and then will perform the necessary i_size update
- * and pagecache truncation (if necessary). It will be typically be called
- * from the filesystem's setattr function when ATTR_SIZE is passed in.
- *
- * The inode itself must have correct permissions and attributes to allow
- * i_size to be changed, this function then just checks that the new size
- * requested is valid.
- *
- * In the case of simple in-memory filesystems with inodes stored solely
- * in the inode cache, and file data in the pagecache, nothing more needs
- * to be done to satisfy a truncate request. Filesystems with on-disk
- * blocks for example will need to free them in the case of truncate, in
- * that case it may be easier not to use simple_setsize (but each of its
- * components will likely be required at some point to update pagecache
- * and inode etc).
- */
-int simple_setsize(struct inode *inode, loff_t newsize)
-{
- loff_t oldsize;
- int error;
-
- error = inode_newsize_ok(inode, newsize);
- if (error)
- return error;
-
- oldsize = inode->i_size;
- i_size_write(inode, newsize);
- truncate_pagecache(inode, oldsize, newsize);
-
- return error;
-}
-EXPORT_SYMBOL(simple_setsize);
-
/**
* simple_setattr - setattr for simple filesystem
* @dentry: dentry
if (error)
return error;
- if (iattr->ia_valid & ATTR_SIZE) {
- error = simple_setsize(inode, iattr->ia_size);
- if (error)
- return error;
- }
-
+ if (iattr->ia_valid & ATTR_SIZE)
+ truncate_setsize(inode, iattr->ia_size);
setattr_copy(inode, iattr);
mark_inode_dirty(inode);
return 0;
}
/*
- * This will intentionally not wind up calling simple_setsize(),
+ * This will intentionally not wind up calling truncate_setsize(),
* since all the work for a size change has been done above.
* Otherwise, we could get into problems with truncate as
* ip_alloc_sem is used there to protect against i_size
* blocks outside i_size. Trim these off again.
* Don't need i_size_read because we hold i_mutex.
*
- * XXX(hch): this looks buggy because ocfs2 did not
+ * XXX(truncate): this looks buggy because ocfs2 did not
* actually implement ->truncate. Take a look at
* the new truncate sequence and update this accordingly
*/
if (*ppos + count > inode->i_size)
- simple_setsize(inode, inode->i_size);
+ truncate_setsize(inode, inode->i_size);
ret = written;
goto out_dio;
}
return ret;
}
- ret = simple_setsize(inode, newsize);
-
- return ret;
+ truncate_setsize(inode, newsize);
+ return 0;
}
/*****************************************************************************/
error = server->ops->truncate(inode, attr->ia_size);
if (error)
goto out;
- error = simple_setsize(inode, attr->ia_size);
- if (error)
- goto out;
+ truncate_setsize(inode, attr->ia_size);
refresh = 1;
}
* the page locked, and it locks @ui_mutex. However, write-back does take inode
* @i_mutex, which means other VFS operations may be run on this inode at the
* same time. And the problematic one is truncation to smaller size, from where
- * we have to call 'simple_setsize()', which first changes @inode->i_size, then
+ * we have to call 'truncate_setsize()', which first changes @inode->i_size, then
* drops the truncated pages. And while dropping the pages, it takes the page
- * lock. This means that 'do_truncation()' cannot call 'simple_setsize()' with
+ * lock. This means that 'do_truncation()' cannot call 'truncate_setsize()' with
* @ui_mutex locked, because it would deadlock with 'ubifs_writepage()'. This
* means that @inode->i_size is changed while @ui_mutex is unlocked.
*
- * XXX: with the new truncate the above is not true anymore, the simple_setsize
- * calls can be replaced with the individual components.
+ * XXX(truncate): with the new truncate sequence this is not true anymore,
+ * and the calls to truncate_setsize can be move around freely. They should
+ * be moved to the very end of the truncate sequence.
*
* But in 'ubifs_writepage()' we have to guarantee that we do not write beyond
* inode size. How do we do this if @inode->i_size may became smaller while we
budgeted = 0;
}
- err = simple_setsize(inode, new_size);
- if (err)
- goto out_budg;
+ truncate_setsize(inode, new_size);
if (offset) {
pgoff_t index = new_size >> PAGE_CACHE_SHIFT;
if (attr->ia_valid & ATTR_SIZE) {
dbg_gen("size %lld -> %lld", inode->i_size, new_size);
- err = simple_setsize(inode, new_size);
- if (err)
- goto out;
+ truncate_setsize(inode, new_size);
}
mutex_lock(&ui->ui_mutex);
if (attr->ia_valid & ATTR_SIZE) {
/* Truncation changes inode [mc]time */
inode->i_mtime = inode->i_ctime = ubifs_current_time(inode);
- /* 'simple_setsize()' changed @i_size, update @ui_size */
+ /* 'truncate_setsize()' changed @i_size, update @ui_size */
ui->ui_size = inode->i_size;
}
if (IS_SYNC(inode))
err = inode->i_sb->s_op->write_inode(inode, NULL);
return err;
-
-out:
- ubifs_release_budget(c, &req);
- return err;
}
int ubifs_setattr(struct dentry *dentry, struct iattr *attr)
* The @ui_size is a "shadow" variable for @inode->i_size and UBIFS uses
* @ui_size instead of @inode->i_size. The reason for this is that UBIFS cannot
* make sure @inode->i_size is always changed under @ui_mutex, because it
- * cannot call 'simple_setsize()' with @ui_mutex locked, because it would deadlock
+ * cannot call 'truncate_setsize()' with @ui_mutex locked, because it would deadlock
* with 'ubifs_writepage()' (see file.c). All the other inode fields are
* changed under @ui_mutex, so they do not need "shadow" fields. Note, one
* could consider to rework locking and base it on "shadow" fields.
return err;
}
-/*
- * TODO:
- * - truncate case should use proper ordering instead of using
- * simple_setsize
- */
int ufs_setattr(struct dentry *dentry, struct iattr *attr)
{
struct inode *inode = dentry->d_inode;
if (ia_valid & ATTR_SIZE && attr->ia_size != inode->i_size) {
loff_t old_i_size = inode->i_size;
- error = simple_setsize(inode, attr->ia_size);
- if (error)
- return error;
+ /* XXX(truncate): truncate_setsize should be called last */
+ truncate_setsize(inode, attr->ia_size);
+
error = ufs_truncate(inode, old_i_size);
if (error)
return error;
extern int simple_unlink(struct inode *, struct dentry *);
extern int simple_rmdir(struct inode *, struct dentry *);
extern int simple_rename(struct inode *, struct dentry *, struct inode *, struct dentry *);
-extern int simple_setsize(struct inode *, loff_t);
extern int noop_fsync(struct file *, int);
extern int simple_empty(struct dentry *);
extern int simple_readpage(struct file *file, struct page *page);
}
extern void truncate_pagecache(struct inode *inode, loff_t old, loff_t new);
+extern void truncate_setsize(struct inode *inode, loff_t newsize);
extern int vmtruncate(struct inode *inode, loff_t offset);
extern int vmtruncate_range(struct inode *inode, loff_t offset, loff_t end);
}
}
- error = simple_setsize(inode, newsize);
+ /* XXX(truncate): truncate_setsize should be called last */
+ truncate_setsize(inode, newsize);
if (page)
page_cache_release(page);
- if (error)
- return error;
shmem_truncate_range(inode, newsize, (loff_t)-1);
}
}
EXPORT_SYMBOL(truncate_pagecache);
+/**
+ * truncate_setsize - update inode and pagecache for a new file size
+ * @inode: inode
+ * @newsize: new file size
+ *
+ * truncate_setsize updastes i_size update and performs pagecache
+ * truncation (if necessary) for a file size updates. It will be
+ * typically be called from the filesystem's setattr function when
+ * ATTR_SIZE is passed in.
+ *
+ * Must be called with inode_mutex held and after all filesystem
+ * specific block truncation has been performed.
+ */
+void truncate_setsize(struct inode *inode, loff_t newsize)
+{
+ loff_t oldsize;
+
+ oldsize = inode->i_size;
+ i_size_write(inode, newsize);
+
+ truncate_pagecache(inode, oldsize, newsize);
+}
+EXPORT_SYMBOL(truncate_setsize);
+
/**
* vmtruncate - unmap mappings "freed" by truncate() syscall
* @inode: inode of the file used
* @offset: file offset to start truncating
*
- * NOTE! We have to be ready to update the memory sharing
- * between the file and the memory map for a potential last
- * incomplete page. Ugly, but necessary.
- *
- * This function is deprecated and simple_setsize or truncate_pagecache
- * should be used instead.
+ * This function is deprecated and truncate_setsize or truncate_pagecache
+ * should be used instead, together with filesystem specific block truncation.
*/
int vmtruncate(struct inode *inode, loff_t offset)
{
int error;
- error = simple_setsize(inode, offset);
+ error = inode_newsize_ok(inode, offset);
if (error)
return error;
+ truncate_setsize(inode, offset);
if (inode->i_op->truncate)
inode->i_op->truncate(inode);
-
- return error;
+ return 0;
}
EXPORT_SYMBOL(vmtruncate);
git.samba.org / sfrench / cifs-2.6.git / commitdiff