git.samba.org / sfrench / cifs-2.6.git / commitdiff
? search:
summary | shortlog | log | commit | commitdiff | tree
raw | patch | inline | side by side (parent: 66ffbe4)
[POWERPC] mpc5200: make dts files conform to generic names recommended practice
authorGrant Likely <grant.likely@secretlab.ca>
Fri, 25 Jan 2008 05:25:31 +0000 (22:25 -0700)
committerGrant Likely <grant.likely@secretlab.ca>
Sat, 26 Jan 2008 22:32:11 +0000 (15:32 -0700)
Modify mpc5200 dts files to match Open Firmware's Generic Names recommended
practice.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
arch/powerpc/boot/dts/cm5200.dts patch | blob | history
arch/powerpc/boot/dts/lite5200.dts patch | blob | history
arch/powerpc/boot/dts/lite5200b.dts patch | blob | history
arch/powerpc/boot/dts/motionpro.dts patch | blob | history
arch/powerpc/boot/dts/tqm5200.dts patch | blob | history
arch/powerpc/boot/serial.c patch | blob | history

diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts
index 2b88a58791ac0e8ae70518dd01eaacdeffd88acc..30737eafe68e2922563e5e9c6e3a02f59213ca1f 100644 (file)
--- a/arch/powerpc/boot/dts/cm5200.dts
+++ b/arch/powerpc/boot/dts/cm5200.dts
@@ -47,17 +47,14 @@
        soc5200@f0000000 {
                #address-cells = <1>;
                #size-cells = <1>;
-               model = "fsl,mpc5200b";
-               compatible = "fsl,mpc5200b";
-               revision = "";                  // from bootloader
-               device_type = "soc";
+               compatible = "fsl,mpc5200b-immr";
                ranges = <0 f0000000 0000c000>;
                reg = <f0000000 00000100>;
                bus-frequency = <0>;            // from bootloader
                system-frequency = <0>;         // from bootloader
 
                cdm@200 {
-                       compatible = "mpc5200b-cdm","mpc5200-cdm";
+                       compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
                        reg = <200 38>;
                };
 
@@ -65,11 +62,11 @@
                        // 5200 interrupts are encoded into two levels;
                        interrupt-controller;
                        #interrupt-cells = <3>;
-                       compatible = "mpc5200b-pic","mpc5200-pic";
+                       compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
                        reg = <500 80>;
                };
 
-               gpt@600 {       // General Purpose Timer
+               timer@600 {     // General Purpose Timer
                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
                        reg = <600 10>;
                        interrupts = <1 9 0>;
@@ -77,49 +74,49 @@
                        fsl,has-wdt;
                };
 
-               gpt@610 {       // General Purpose Timer
+               timer@610 {     // General Purpose Timer
                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
                        reg = <610 10>;
                        interrupts = <1 a 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
-               gpt@620 {       // General Purpose Timer
+               timer@620 {     // General Purpose Timer
                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
                        reg = <620 10>;
                        interrupts = <1 b 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
-               gpt@630 {       // General Purpose Timer
+               timer@630 {     // General Purpose Timer
                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
                        reg = <630 10>;
                        interrupts = <1 c 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
-               gpt@640 {       // General Purpose Timer
+               timer@640 {     // General Purpose Timer
                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
                        reg = <640 10>;
                        interrupts = <1 d 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
-               gpt@650 {       // General Purpose Timer
+               timer@650 {     // General Purpose Timer
                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
                        reg = <650 10>;
                        interrupts = <1 e 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
-               gpt@660 {       // General Purpose Timer
+               timer@660 {     // General Purpose Timer
                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
                        reg = <660 10>;
                        interrupts = <1 f 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
-               gpt@670 {       // General Purpose Timer
+               timer@670 {     // General Purpose Timer
                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
                        reg = <670 10>;
                        interrupts = <1 10 0>;
@@ -127,43 +124,42 @@
                };
 
                rtc@800 {       // Real time clock
-                       compatible = "mpc5200b-rtc","mpc5200-rtc";
+                       compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
                        reg = <800 100>;
                        interrupts = <1 5 0 1 6 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
                gpio@b00 {
-                       compatible = "mpc5200b-gpio","mpc5200-gpio";
+                       compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
                        reg = <b00 40>;
                        interrupts = <1 7 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
-               gpio-wkup@c00 {
-                       compatible = "mpc5200b-gpio-wkup","mpc5200-gpio-wkup";
+               gpio@c00 {
+                       compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
                        reg = <c00 40>;
                        interrupts = <1 8 0 0 3 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
                spi@f00 {
-                       compatible = "mpc5200b-spi","mpc5200-spi";
+                       compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
                        reg = <f00 20>;
                        interrupts = <2 d 0 2 e 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
                usb@1000 {
-                       device_type = "usb-ohci-be";
-                       compatible = "mpc5200b-ohci","mpc5200-ohci","ohci-be";
+                       compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
                        reg = <1000 ff>;
                        interrupts = <2 6 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
                dma-controller@1200 {
-                       compatible = "mpc5200b-bestcomm","mpc5200-bestcomm";
+                       compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
                        reg = <1200 80>;
                        interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
                                      3 4 0  3 5 0  3 6 0  3 7 0
@@ -173,13 +169,13 @@
                };
 
                xlb@1f00 {
-                       compatible = "mpc5200b-xlb","mpc5200-xlb";
+                       compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
                        reg = <1f00 100>;
                };
 
                serial@2000 {           // PSC1
                        device_type = "serial";
-                       compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";
+                       compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
                        port-number = <0>;  // Logical port assignment
                        reg = <2000 100>;
                        interrupts = <2 1 0>;
@@ -188,7 +184,7 @@
 
                serial@2200 {           // PSC2
                        device_type = "serial";
-                       compatible = "mpc5200-psc-uart";
+                       compatible = "fsl,mpc5200-psc-uart";
                        port-number = <1>;  // Logical port assignment
                        reg = <2200 100>;
                        interrupts = <2 2 0>;
@@ -197,7 +193,7 @@
 
                serial@2400 {           // PSC3
                        device_type = "serial";
-                       compatible = "mpc5200-psc-uart";
+                       compatible = "fsl,mpc5200-psc-uart";
                        port-number = <2>;  // Logical port assignment
                        reg = <2400 100>;
                        interrupts = <2 3 0>;
@@ -206,7 +202,7 @@
 
                serial@2c00 {           // PSC6
                        device_type = "serial";
-                       compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";
+                       compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
                        port-number = <5>;  // Logical port assignment
                        reg = <2c00 100>;
                        interrupts = <2 4 0>;
@@ -215,15 +211,15 @@
 
                ethernet@3000 {
                        device_type = "network";
-                       compatible = "mpc5200b-fec","mpc5200-fec";
+                       compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
                        reg = <3000 800>;
-                       local-mac-address = [ 00 00 00 00 00 00 ]; /* Filled in by U-Boot */
+                       local-mac-address = [ 00 00 00 00 00 00 ];
                        interrupts = <2 5 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
                i2c@3d40 {
-                       compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c";
+                       compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
                        reg = <3d40 40>;
                        interrupts = <2 10 0>;
                        interrupt-parent = <&mpc5200_pic>;
@@ -231,7 +227,7 @@
                };
 
                sram@8000 {
-                       compatible = "mpc5200b-sram","mpc5200-sram";
+                       compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
                        reg = <8000 4000>;
                };
        };
diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index 7de3d2133d7caa4875722c9a7c496ee7a8e6d344..0d701c1bf539e518035825a173e436da223d824d 100644 (file)
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -10,15 +10,8 @@
  * option) any later version.
  */
 
-/*
- * WARNING: Do not depend on this tree layout remaining static just yet.
- * The MPC5200 device tree conventions are still in flux
- * Keep an eye on the linuxppc-dev mailing list for more details
- */
-
 / {
        model = "fsl,lite5200";
-       // revision = "1.0";
        compatible = "fsl,lite5200";
        #address-cells = <1>;
        #size-cells = <1>;
@@ -48,30 +41,27 @@
        soc5200@f0000000 {
                #address-cells = <1>;
                #size-cells = <1>;
-               model = "fsl,mpc5200";
-               compatible = "mpc5200";
-               revision = "";                  // from bootloader
-               device_type = "soc";
+               compatible = "fsl,mpc5200-immr";
                ranges = <0 f0000000 0000c000>;
                reg = <f0000000 00000100>;
                bus-frequency = <0>;            // from bootloader
                system-frequency = <0>;         // from bootloader
 
                cdm@200 {
-                       compatible = "mpc5200-cdm";
+                       compatible = "fsl,mpc5200-cdm";
                        reg = <200 38>;
                };
 
-               mpc5200_pic: pic@500 {
+               mpc5200_pic: interrupt-controller@500 {
                        // 5200 interrupts are encoded into two levels;
                        interrupt-controller;
                        #interrupt-cells = <3>;
                        device_type = "interrupt-controller";
-                       compatible = "mpc5200-pic";
+                       compatible = "fsl,mpc5200-pic";
                        reg = <500 80>;
                };
 
-               gpt@600 {       // General Purpose Timer
+               timer@600 {     // General Purpose Timer
                        compatible = "fsl,mpc5200-gpt";
                        cell-index = <0>;
                        reg = <600 10>;
@@ -80,7 +70,7 @@
                        fsl,has-wdt;
                };
 
-               gpt@610 {       // General Purpose Timer
+               timer@610 {     // General Purpose Timer
                        compatible = "fsl,mpc5200-gpt";
                        cell-index = <1>;
                        reg = <610 10>;
@@ -88,7 +78,7 @@
                        interrupt-parent = <&mpc5200_pic>;
                };
 
-               gpt@620 {       // General Purpose Timer
+               timer@620 {     // General Purpose Timer
                        compatible = "fsl,mpc5200-gpt";
                        cell-index = <2>;
                        reg = <620 10>;
@@ -96,7 +86,7 @@
                        interrupt-parent = <&mpc5200_pic>;
                };
 
-               gpt@630 {       // General Purpose Timer
+               timer@630 {     // General Purpose Timer
                        compatible = "fsl,mpc5200-gpt";
                        cell-index = <3>;
                        reg = <630 10>;
@@ -104,7 +94,7 @@
                        interrupt-parent = <&mpc5200_pic>;
                };
 
-               gpt@640 {       // General Purpose Timer
+               timer@640 {     // General Purpose Timer
                        compatible = "fsl,mpc5200-gpt";
                        cell-index = <4>;
                        reg = <640 10>;
@@ -112,7 +102,7 @@
                        interrupt-parent = <&mpc5200_pic>;
                };
 
-               gpt@650 {       // General Purpose Timer
+               timer@650 {     // General Purpose Timer
                        compatible = "fsl,mpc5200-gpt";
                        cell-index = <5>;
                        reg = <650 10>;
@@ -120,7 +110,7 @@
                        interrupt-parent = <&mpc5200_pic>;
                };
 
-               gpt@660 {       // General Purpose Timer
+               timer@660 {     // General Purpose Timer
                        compatible = "fsl,mpc5200-gpt";
                        cell-index = <6>;
                        reg = <660 10>;
@@ -128,7 +118,7 @@
                        interrupt-parent = <&mpc5200_pic>;
                };
 
-               gpt@670 {       // General Purpose Timer
+               timer@670 {     // General Purpose Timer
                        compatible = "fsl,mpc5200-gpt";
                        cell-index = <7>;
                        reg = <670 10>;
@@ -137,25 +127,23 @@
                };
 
                rtc@800 {       // Real time clock
-                       compatible = "mpc5200-rtc";
+                       compatible = "fsl,mpc5200-rtc";
                        device_type = "rtc";
                        reg = <800 100>;
                        interrupts = <1 5 0 1 6 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
-               mscan@900 {
-                       device_type = "mscan";
-                       compatible = "mpc5200-mscan";
+               can@900 {
+                       compatible = "fsl,mpc5200-mscan";
                        cell-index = <0>;
                        interrupts = <2 11 0>;
                        interrupt-parent = <&mpc5200_pic>;
                        reg = <900 80>;
                };
 
-               mscan@980 {
-                       device_type = "mscan";
-                       compatible = "mpc5200-mscan";
+               can@980 {
+                       compatible = "fsl,mpc5200-mscan";
                        cell-index = <1>;
                        interrupts = <2 12 0>;
                        interrupt-parent = <&mpc5200_pic>;
@@ -163,38 +151,36 @@
                };
 
                gpio@b00 {
-                       compatible = "mpc5200-gpio";
+                       compatible = "fsl,mpc5200-gpio";
                        reg = <b00 40>;
                        interrupts = <1 7 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
-               gpio-wkup@c00 {
-                       compatible = "mpc5200-gpio-wkup";
+               gpio@c00 {
+                       compatible = "fsl,mpc5200-gpio-wkup";
                        reg = <c00 40>;
                        interrupts = <1 8 0 0 3 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
                spi@f00 {
-                       device_type = "spi";
-                       compatible = "mpc5200-spi";
+                       compatible = "fsl,mpc5200-spi";
                        reg = <f00 20>;
                        interrupts = <2 d 0 2 e 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
                usb@1000 {
-                       device_type = "usb-ohci-be";
-                       compatible = "mpc5200-ohci","ohci-be";
+                       compatible = "fsl,mpc5200-ohci","ohci-be";
                        reg = <1000 ff>;
                        interrupts = <2 6 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
-               bestcomm@1200 {
+               dma-controller@1200 {
                        device_type = "dma-controller";
-                       compatible = "mpc5200-bestcomm";
+                       compatible = "fsl,mpc5200-bestcomm";
                        reg = <1200 80>;
                        interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
                                      3 4 0  3 5 0  3 6 0  3 7 0
@@ -204,13 +190,13 @@
                };
 
                xlb@1f00 {
-                       compatible = "mpc5200-xlb";
+                       compatible = "fsl,mpc5200-xlb";
                        reg = <1f00 100>;
                };
 
                serial@2000 {           // PSC1
                        device_type = "serial";
-                       compatible = "mpc5200-psc-uart";
+                       compatible = "fsl,mpc5200-psc-uart";
                        port-number = <0>;  // Logical port assignment
                        cell-index = <0>;
                        reg = <2000 100>;
@@ -220,8 +206,7 @@
 
                // PSC2 in ac97 mode example
                //ac97@2200 {           // PSC2
-               //      device_type = "sound";
-               //      compatible = "mpc5200-psc-ac97";
+               //      compatible = "fsl,mpc5200-psc-ac97";
                //      cell-index = <1>;
                //      reg = <2200 100>;
                //      interrupts = <2 2 0>;
@@ -230,8 +215,7 @@
 
                // PSC3 in CODEC mode example
                //i2s@2400 {            // PSC3
-               //      device_type = "sound";
-               //      compatible = "mpc5200-psc-i2s";
+               //      compatible = "fsl,mpc5200-psc-i2s";
                //      cell-index = <2>;
                //      reg = <2400 100>;
                //      interrupts = <2 3 0>;
@@ -241,7 +225,7 @@
                // PSC4 in uart mode example
                //serial@2600 {         // PSC4
                //      device_type = "serial";
-               //      compatible = "mpc5200-psc-uart";
+               //      compatible = "fsl,mpc5200-psc-uart";
                //      cell-index = <3>;
                //      reg = <2600 100>;
                //      interrupts = <2 b 0>;
@@ -251,7 +235,7 @@
                // PSC5 in uart mode example
                //serial@2800 {         // PSC5
                //      device_type = "serial";
-               //      compatible = "mpc5200-psc-uart";
+               //      compatible = "fsl,mpc5200-psc-uart";
                //      cell-index = <4>;
                //      reg = <2800 100>;
                //      interrupts = <2 c 0>;
@@ -260,8 +244,7 @@
 
                // PSC6 in spi mode example
                //spi@2c00 {            // PSC6
-               //      device_type = "spi";
-               //      compatible = "mpc5200-psc-spi";
+               //      compatible = "fsl,mpc5200-psc-spi";
                //      cell-index = <5>;
                //      reg = <2c00 100>;
                //      interrupts = <2 4 0>;
@@ -270,16 +253,16 @@
 
                ethernet@3000 {
                        device_type = "network";
-                       compatible = "mpc5200-fec";
+                       compatible = "fsl,mpc5200-fec";
                        reg = <3000 800>;
-                       mac-address = [ 02 03 04 05 06 07 ]; // Bad!
+                       local-mac-address = [ 00 00 00 00 00 00 ];
                        interrupts = <2 5 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
                ata@3a00 {
                        device_type = "ata";
-                       compatible = "mpc5200-ata";
+                       compatible = "fsl,mpc5200-ata";
                        reg = <3a00 100>;
                        interrupts = <2 7 0>;
                        interrupt-parent = <&mpc5200_pic>;
@@ -288,7 +271,7 @@
                i2c@3d00 {
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       compatible = "mpc5200-i2c","fsl-i2c";
+                       compatible = "fsl,mpc5200-i2c","fsl-i2c";
                        cell-index = <0>;
                        reg = <3d00 40>;
                        interrupts = <2 f 0>;
@@ -299,7 +282,7 @@
                i2c@3d40 {
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       compatible = "mpc5200-i2c","fsl-i2c";
+                       compatible = "fsl,mpc5200-i2c","fsl-i2c";
                        cell-index = <1>;
                        reg = <3d40 40>;
                        interrupts = <2 10 0>;
@@ -307,8 +290,7 @@
                        fsl5200-clocking;
                };
                sram@8000 {
-                       device_type = "sram";
-                       compatible = "mpc5200-sram","sram";
+                       compatible = "fsl,mpc5200-sram","sram";
                        reg = <8000 4000>;
                };
        };
@@ -318,7 +300,7 @@
                #size-cells = <2>;
                #address-cells = <3>;
                device_type = "pci";
-               compatible = "mpc5200-pci";
+               compatible = "fsl,mpc5200-pci";
                reg = <f0000d00 100>;
                interrupt-map-mask = <f800 0 0 7>;
                interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index dd2c4fd3d09884b237ae0381c02cbeff27735fd2..571ba02accacdea16863412dd967c9c3eb7746d6 100644 (file)
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -18,7 +18,6 @@
 
 / {
        model = "fsl,lite5200b";
-       // revision = "1.0";
        compatible = "fsl,lite5200b";
        #address-cells = <1>;
        #size-cells = <1>;
@@ -48,30 +47,27 @@
        soc5200@f0000000 {
                #address-cells = <1>;
                #size-cells = <1>;
-               model = "fsl,mpc5200b";
-               compatible = "mpc5200";
-               revision = "";                  // from bootloader
-               device_type = "soc";
+               compatible = "fsl,mpc5200b-immr";
                ranges = <0 f0000000 0000c000>;
                reg = <f0000000 00000100>;
                bus-frequency = <0>;            // from bootloader
                system-frequency = <0>;         // from bootloader
 
                cdm@200 {
-                       compatible = "mpc5200b-cdm","mpc5200-cdm";
+                       compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
                        reg = <200 38>;
                };
 
-               mpc5200_pic: pic@500 {
+               mpc5200_pic: interrupt-controller@500 {
                        // 5200 interrupts are encoded into two levels;
                        interrupt-controller;
                        #interrupt-cells = <3>;
                        device_type = "interrupt-controller";
-                       compatible = "mpc5200b-pic","mpc5200-pic";
+                       compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
                        reg = <500 80>;
                };
 
-               gpt@600 {       // General Purpose Timer
+               timer@600 {     // General Purpose Timer
                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
                        cell-index = <0>;
                        reg = <600 10>;
@@ -80,7 +76,7 @@
                        fsl,has-wdt;
                };
 
-               gpt@610 {       // General Purpose Timer
+               timer@610 {     // General Purpose Timer
                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
                        cell-index = <1>;
                        reg = <610 10>;
@@ -88,7 +84,7 @@
                        interrupt-parent = <&mpc5200_pic>;
                };
 
-               gpt@620 {       // General Purpose Timer
+               timer@620 {     // General Purpose Timer
                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
                        cell-index = <2>;
                        reg = <620 10>;
@@ -96,7 +92,7 @@
                        interrupt-parent = <&mpc5200_pic>;
                };
 
-               gpt@630 {       // General Purpose Timer
+               timer@630 {     // General Purpose Timer
                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
                        cell-index = <3>;
                        reg = <630 10>;
@@ -104,7 +100,7 @@
                        interrupt-parent = <&mpc5200_pic>;
                };
 
-               gpt@640 {       // General Purpose Timer
+               timer@640 {     // General Purpose Timer
                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
                        cell-index = <4>;
                        reg = <640 10>;
@@ -112,7 +108,7 @@
                        interrupt-parent = <&mpc5200_pic>;
                };
 
-               gpt@650 {       // General Purpose Timer
+               timer@650 {     // General Purpose Timer
                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
                        cell-index = <5>;
                        reg = <650 10>;
@@ -120,7 +116,7 @@
                        interrupt-parent = <&mpc5200_pic>;
                };
 
-               gpt@660 {       // General Purpose Timer
+               timer@660 {     // General Purpose Timer
                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
                        cell-index = <6>;
                        reg = <660 10>;
@@ -128,7 +124,7 @@
                        interrupt-parent = <&mpc5200_pic>;
                };
 
-               gpt@670 {       // General Purpose Timer
+               timer@670 {     // General Purpose Timer
                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
                        cell-index = <7>;
                        reg = <670 10>;
@@ -137,25 +133,23 @@
                };
 
                rtc@800 {       // Real time clock
-                       compatible = "mpc5200b-rtc","mpc5200-rtc";
+                       compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
                        device_type = "rtc";
                        reg = <800 100>;
                        interrupts = <1 5 0 1 6 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
-               mscan@900 {
-                       device_type = "mscan";
-                       compatible = "mpc5200b-mscan","mpc5200-mscan";
+               can@900 {
+                       compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
                        cell-index = <0>;
                        interrupts = <2 11 0>;
                        interrupt-parent = <&mpc5200_pic>;
                        reg = <900 80>;
                };
 
-               mscan@980 {
-                       device_type = "mscan";
-                       compatible = "mpc5200b-mscan","mpc5200-mscan";
+               can@980 {
+                       compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
                        cell-index = <1>;
                        interrupts = <2 12 0>;
                        interrupt-parent = <&mpc5200_pic>;
@@ -163,38 +157,36 @@
                };
 
                gpio@b00 {
-                       compatible = "mpc5200b-gpio","mpc5200-gpio";
+                       compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
                        reg = <b00 40>;
                        interrupts = <1 7 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
-               gpio-wkup@c00 {
-                       compatible = "mpc5200b-gpio-wkup","mpc5200-gpio-wkup";
+               gpio@c00 {
+                       compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
                        reg = <c00 40>;
                        interrupts = <1 8 0 0 3 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
                spi@f00 {
-                       device_type = "spi";
-                       compatible = "mpc5200b-spi","mpc5200-spi";
+                       compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
                        reg = <f00 20>;
                        interrupts = <2 d 0 2 e 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
                usb@1000 {
-                       device_type = "usb-ohci-be";
-                       compatible = "mpc5200b-ohci","mpc5200-ohci","ohci-be";
+                       compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
                        reg = <1000 ff>;
                        interrupts = <2 6 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
-               bestcomm@1200 {
+               dma-controller@1200 {
                        device_type = "dma-controller";
-                       compatible = "mpc5200b-bestcomm","mpc5200-bestcomm";
+                       compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
                        reg = <1200 80>;
                        interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
                                      3 4 0  3 5 0  3 6 0  3 7 0
@@ -204,13 +196,13 @@
                };
 
                xlb@1f00 {
-                       compatible = "mpc5200b-xlb","mpc5200-xlb";
+                       compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
                        reg = <1f00 100>;
                };
 
                serial@2000 {           // PSC1
                        device_type = "serial";
-                       compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";
+                       compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
                        port-number = <0>;  // Logical port assignment
                        cell-index = <0>;
                        reg = <2000 100>;
@@ -220,8 +212,7 @@
 
                // PSC2 in ac97 mode example
                //ac97@2200 {           // PSC2
-               //      device_type = "sound";
-               //      compatible = "mpc5200b-psc-ac97","mpc5200-psc-ac97";
+               //      compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
                //      cell-index = <1>;
                //      reg = <2200 100>;
                //      interrupts = <2 2 0>;
@@ -230,8 +221,7 @@
 
                // PSC3 in CODEC mode example
                //i2s@2400 {            // PSC3
-               //      device_type = "sound";
-               //      compatible = "mpc5200b-psc-i2s"; //not 5200 compatible
+               //      compatible = "fsl,mpc5200b-psc-i2s"; //not 5200 compatible
                //      cell-index = <2>;
                //      reg = <2400 100>;
                //      interrupts = <2 3 0>;
@@ -241,7 +231,7 @@
                // PSC4 in uart mode example
                //serial@2600 {         // PSC4
                //      device_type = "serial";
-               //      compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";
+               //      compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
                //      cell-index = <3>;
                //      reg = <2600 100>;
                //      interrupts = <2 b 0>;
@@ -251,7 +241,7 @@
                // PSC5 in uart mode example
                //serial@2800 {         // PSC5
                //      device_type = "serial";
-               //      compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";
+               //      compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
                //      cell-index = <4>;
                //      reg = <2800 100>;
                //      interrupts = <2 c 0>;
@@ -260,8 +250,7 @@
 
                // PSC6 in spi mode example
                //spi@2c00 {            // PSC6
-               //      device_type = "spi";
-               //      compatible = "mpc5200b-psc-spi","mpc5200-psc-spi";
+               //      compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
                //      cell-index = <5>;
                //      reg = <2c00 100>;
                //      interrupts = <2 4 0>;
@@ -270,9 +259,9 @@
 
                ethernet@3000 {
                        device_type = "network";
-                       compatible = "mpc5200b-fec","mpc5200-fec";
+                       compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
                        reg = <3000 400>;
-                       mac-address = [ 02 03 04 05 06 07 ]; // Bad!
+                       local-mac-address = [ 00 00 00 00 00 00 ];
                        interrupts = <2 5 0>;
                        interrupt-parent = <&mpc5200_pic>;
                        phy-handle = <&phy0>;
@@ -281,8 +270,7 @@
                mdio@3000 {
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       device_type = "mdio";
-                       compatible = "mpc5200b-fec-phy";
+                       compatible = "fsl,mpc5200b-mdio";
                        reg = <3000 400>;       // fec range, since we need to setup fec interrupts
                        interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
                        interrupt-parent = <&mpc5200_pic>;
@@ -295,7 +283,7 @@
 
                ata@3a00 {
                        device_type = "ata";
-                       compatible = "mpc5200b-ata","mpc5200-ata";
+                       compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
                        reg = <3a00 100>;
                        interrupts = <2 7 0>;
                        interrupt-parent = <&mpc5200_pic>;
@@ -304,7 +292,7 @@
                i2c@3d00 {
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c";
+                       compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
                        cell-index = <0>;
                        reg = <3d00 40>;
                        interrupts = <2 f 0>;
@@ -315,7 +303,7 @@
                i2c@3d40 {
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c";
+                       compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
                        cell-index = <1>;
                        reg = <3d40 40>;
                        interrupts = <2 10 0>;
@@ -323,8 +311,7 @@
                        fsl5200-clocking;
                };
                sram@8000 {
-                       device_type = "sram";
-                       compatible = "mpc5200b-sram","mpc5200-sram","sram";
+                       compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram","sram";
                        reg = <8000 4000>;
                };
        };
@@ -334,7 +321,7 @@
                #size-cells = <2>;
                #address-cells = <3>;
                device_type = "pci";
-               compatible = "mpc5200b-pci","mpc5200-pci";
+               compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
                reg = <f0000d00 100>;
                interrupt-map-mask = <f800 0 0 7>;
                interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts
index ee30805e35cd4fda801ca8fa129d6d6aaf4df843..76951ab038ee59ff3fc77cfe3e176be3ce72b11e 100644 (file)
--- a/arch/powerpc/boot/dts/motionpro.dts
+++ b/arch/powerpc/boot/dts/motionpro.dts
@@ -10,12 +10,6 @@
  * option) any later version.
  */
 
-/*
- * WARNING: Do not depend on this tree layout remaining static just yet.
- * The MPC5200 device tree conventions are still in flux
- * Keep an eye on the linuxppc-dev mailing list for more details
- */
-
 / {
        model = "promess,motionpro";
        compatible = "promess,motionpro";
@@ -47,29 +41,26 @@
        soc5200@f0000000 {
                #address-cells = <1>;
                #size-cells = <1>;
-               model = "fsl,mpc5200b";
-               compatible = "fsl,mpc5200b";
-               revision = "";                  // from bootloader
-               device_type = "soc";
+               compatible = "fsl,mpc5200b-immr";
                ranges = <0 f0000000 0000c000>;
                reg = <f0000000 00000100>;
                bus-frequency = <0>;            // from bootloader
                system-frequency = <0>;         // from bootloader
 
                cdm@200 {
-                       compatible = "mpc5200b-cdm","mpc5200-cdm";
+                       compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
                        reg = <200 38>;
                };
 
-               mpc5200_pic: pic@500 {
+               mpc5200_pic: interrupt-controller@500 {
                        // 5200 interrupts are encoded into two levels;
                        interrupt-controller;
                        #interrupt-cells = <3>;
-                       compatible = "mpc5200b-pic","mpc5200-pic";
+                       compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
                        reg = <500 80>;
                };
 
-               gpt@600 {       // General Purpose Timer
+               timer@600 {     // General Purpose Timer
                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
                        reg = <600 10>;
                        interrupts = <1 9 0>;
@@ -77,35 +68,35 @@
                        fsl,has-wdt;
                };
 
-               gpt@610 {       // General Purpose Timer
+               timer@610 {     // General Purpose Timer
                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
                        reg = <610 10>;
                        interrupts = <1 a 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
-               gpt@620 {       // General Purpose Timer
+               timer@620 {     // General Purpose Timer
                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
                        reg = <620 10>;
                        interrupts = <1 b 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
-               gpt@630 {       // General Purpose Timer
+               timer@630 {     // General Purpose Timer
                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
                        reg = <630 10>;
                        interrupts = <1 c 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
-               gpt@640 {       // General Purpose Timer
+               timer@640 {     // General Purpose Timer
                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
                        reg = <640 10>;
                        interrupts = <1 d 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
-               gpt@650 {       // General Purpose Timer
+               timer@650 {     // General Purpose Timer
                        compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
                        reg = <650 10>;
                        interrupts = <1 e 0>;
@@ -130,28 +121,28 @@
                };
 
                rtc@800 {       // Real time clock
-                       compatible = "mpc5200b-rtc","mpc5200-rtc";
+                       compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
                        reg = <800 100>;
                        interrupts = <1 5 0 1 6 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
                mscan@980 {
-                       compatible = "mpc5200b-mscan","mpc5200-mscan";
+                       compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
                        interrupts = <2 12 0>;
                        interrupt-parent = <&mpc5200_pic>;
                        reg = <980 80>;
                };
 
                gpio@b00 {
-                       compatible = "mpc5200b-gpio","mpc5200-gpio";
+                       compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
                        reg = <b00 40>;
                        interrupts = <1 7 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
-               gpio-wkup@c00 {
-                       compatible = "mpc5200b-gpio-wkup","mpc5200-gpio-wkup";
+               gpio@c00 {
+                       compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
                        reg = <c00 40>;
                        interrupts = <1 8 0 0 3 0>;
                        interrupt-parent = <&mpc5200_pic>;
@@ -159,21 +150,21 @@
 
 
                spi@f00 {
-                       compatible = "mpc5200b-spi","mpc5200-spi";
+                       compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
                        reg = <f00 20>;
                        interrupts = <2 d 0 2 e 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
                usb@1000 {
-                       compatible = "mpc5200b-ohci","mpc5200-ohci","ohci-be";
+                       compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
                        reg = <1000 ff>;
                        interrupts = <2 6 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
                dma-controller@1200 {
-                       compatible = "mpc5200b-bestcomm","mpc5200-bestcomm";
+                       compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
                        reg = <1200 80>;
                        interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
                                      3 4 0  3 5 0  3 6 0  3 7 0
@@ -183,13 +174,13 @@
                };
 
                xlb@1f00 {
-                       compatible = "mpc5200b-xlb","mpc5200-xlb";
+                       compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
                        reg = <1f00 100>;
                };
 
                serial@2000 {           // PSC1
                        device_type = "serial";
-                       compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";
+                       compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
                        port-number = <0>;  // Logical port assignment
                        reg = <2000 100>;
                        interrupts = <2 1 0>;
@@ -198,7 +189,7 @@
 
                // PSC2 in spi master mode 
                spi@2200 {              // PSC2
-                       compatible = "mpc5200b-psc-spi","mpc5200-psc-spi";
+                       compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
                        cell-index = <1>;
                        reg = <2200 100>;
                        interrupts = <2 2 0>;
@@ -208,7 +199,7 @@
                // PSC5 in uart mode
                serial@2800 {           // PSC5
                        device_type = "serial";
-                       compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";
+                       compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
                        port-number = <4>;  // Logical port assignment
                        reg = <2800 100>;
                        interrupts = <2 c 0>;
@@ -217,22 +208,22 @@
 
                ethernet@3000 {
                        device_type = "network";
-                       compatible = "mpc5200b-fec","mpc5200-fec";
+                       compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
                        reg = <3000 800>;
-                       local-mac-address = [ 00 00 00 00 00 00 ]; /* Filled in by U-Boot */
+                       local-mac-address = [ 00 00 00 00 00 00 ];
                        interrupts = <2 5 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
                ata@3a00 {
-                       compatible = "mpc5200b-ata","mpc5200-ata";
+                       compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
                        reg = <3a00 100>;
                        interrupts = <2 7 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
                i2c@3d40 {
-                       compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c";
+                       compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
                        reg = <3d40 40>;
                        interrupts = <2 10 0>;
                        interrupt-parent = <&mpc5200_pic>;
@@ -240,13 +231,12 @@
                };
 
                sram@8000 {
-                       compatible = "mpc5200b-sram","mpc5200-sram";
+                       compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
                        reg = <8000 4000>;
                };
        };
 
        lpb {
-               model = "fsl,lpb";
                compatible = "fsl,lpb";
                #address-cells = <2>;
                #size-cells = <1>;
@@ -288,7 +278,7 @@
                #size-cells = <2>;
                #address-cells = <3>;
                device_type = "pci";
-               compatible = "mpc5200b-pci","mpc5200-pci";
+               compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
                reg = <f0000d00 100>;
                interrupt-map-mask = <f800 0 0 7>;
                interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts
index 58c9799caf16c1432e33693b88ceed62ebe5ab95..c86464f007da357df9e4ed648fe05aa74a8ae991 100644 (file)
--- a/arch/powerpc/boot/dts/tqm5200.dts
+++ b/arch/powerpc/boot/dts/tqm5200.dts
@@ -10,12 +10,6 @@
  * option) any later version.
  */
 
-/*
- * WARNING: Do not depend on this tree layout remaining static just yet.
- * The MPC5200 device tree conventions are still in flux
- * Keep an eye on the linuxppc-dev mailing list for more details
- */
-
 / {
        model = "tqc,tqm5200";
        compatible = "tqc,tqm5200";
@@ -47,29 +41,26 @@
        soc5200@f0000000 {
                #address-cells = <1>;
                #size-cells = <1>;
-               model = "fsl,mpc5200";
-               compatible = "fsl,mpc5200";
-               revision = "";                  // from bootloader
-               device_type = "soc";
+               compatible = "fsl,mpc5200-immr";
                ranges = <0 f0000000 0000c000>;
                reg = <f0000000 00000100>;
                bus-frequency = <0>;            // from bootloader
                system-frequency = <0>;         // from bootloader
 
                cdm@200 {
-                       compatible = "mpc5200-cdm";
+                       compatible = "fsl,mpc5200-cdm";
                        reg = <200 38>;
                };
 
-               mpc5200_pic: pic@500 {
+               mpc5200_pic: interrupt-controller@500 {
                        // 5200 interrupts are encoded into two levels;
                        interrupt-controller;
                        #interrupt-cells = <3>;
-                       compatible = "mpc5200-pic";
+                       compatible = "fsl,mpc5200-pic";
                        reg = <500 80>;
                };
 
-               gpt@600 {       // General Purpose Timer
+               timer@600 {     // General Purpose Timer
                        compatible = "fsl,mpc5200-gpt";
                        reg = <600 10>;
                        interrupts = <1 9 0>;
@@ -78,21 +69,21 @@
                };
 
                gpio@b00 {
-                       compatible = "mpc5200-gpio";
+                       compatible = "fsl,mpc5200-gpio";
                        reg = <b00 40>;
                        interrupts = <1 7 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
                usb@1000 {
-                       compatible = "mpc5200-ohci","ohci-be";
+                       compatible = "fsl,mpc5200-ohci","ohci-be";
                        reg = <1000 ff>;
                        interrupts = <2 6 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
                dma-controller@1200 {
-                       compatible = "mpc5200-bestcomm";
+                       compatible = "fsl,mpc5200-bestcomm";
                        reg = <1200 80>;
                        interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
                                      3 4 0  3 5 0  3 6 0  3 7 0
@@ -102,13 +93,13 @@
                };
 
                xlb@1f00 {
-                       compatible = "mpc5200-xlb";
+                       compatible = "fsl,mpc5200-xlb";
                        reg = <1f00 100>;
                };
 
                serial@2000 {           // PSC1
                        device_type = "serial";
-                       compatible = "mpc5200-psc-uart";
+                       compatible = "fsl,mpc5200-psc-uart";
                        port-number = <0>;  // Logical port assignment
                        reg = <2000 100>;
                        interrupts = <2 1 0>;
@@ -117,7 +108,7 @@
 
                serial@2200 {           // PSC2
                        device_type = "serial";
-                       compatible = "mpc5200-psc-uart";
+                       compatible = "fsl,mpc5200-psc-uart";
                        port-number = <1>;  // Logical port assignment
                        reg = <2200 100>;
                        interrupts = <2 2 0>;
@@ -126,7 +117,7 @@
 
                serial@2400 {           // PSC3
                        device_type = "serial";
-                       compatible = "mpc5200-psc-uart";
+                       compatible = "fsl,mpc5200-psc-uart";
                        port-number = <2>;  // Logical port assignment
                        reg = <2400 100>;
                        interrupts = <2 3 0>;
@@ -135,22 +126,22 @@
 
                ethernet@3000 {
                        device_type = "network";
-                       compatible = "mpc5200-fec";
+                       compatible = "fsl,mpc5200-fec";
                        reg = <3000 800>;
-                       local-mac-address = [ 00 00 00 00 00 00 ]; /* Filled in by U-Boot */
+                       local-mac-address = [ 00 00 00 00 00 00 ];
                        interrupts = <2 5 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
                ata@3a00 {
-                       compatible = "mpc5200-ata";
+                       compatible = "fsl,mpc5200-ata";
                        reg = <3a00 100>;
                        interrupts = <2 7 0>;
                        interrupt-parent = <&mpc5200_pic>;
                };
 
                i2c@3d40 {
-                       compatible = "mpc5200-i2c","fsl-i2c";
+                       compatible = "fsl,mpc5200-i2c","fsl-i2c";
                        reg = <3d40 40>;
                        interrupts = <2 10 0>;
                        interrupt-parent = <&mpc5200_pic>;
@@ -158,7 +149,7 @@
                };
 
                sram@8000 {
-                       compatible = "mpc5200-sram";
+                       compatible = "fsl,mpc5200-sram";
                        reg = <8000 4000>;
                };
        };
diff --git a/arch/powerpc/boot/serial.c b/arch/powerpc/boot/serial.c
index b6c68ef46809527cc095ca1b559f4a5f7bc77261..9960421eb6b9e08b418105b4577846fd49b4adac 100644 (file)
--- a/arch/powerpc/boot/serial.c
+++ b/arch/powerpc/boot/serial.c
@@ -126,7 +126,7 @@ int serial_console_init(void)
                 dt_is_compatible(devp, "fsl,cpm2-scc-uart") ||
                 dt_is_compatible(devp, "fsl,cpm2-smc-uart"))
                rc = cpm_console_init(devp, &serial_cd);
-       else if (dt_is_compatible(devp, "mpc5200-psc-uart"))
+       else if (dt_is_compatible(devp, "fsl,mpc5200-psc-uart"))
                rc = mpc5200_psc_console_init(devp, &serial_cd);
        else if (dt_is_compatible(devp, "xlnx,opb-uartlite-1.00.b") ||
                 dt_is_compatible(devp, "xlnx,xps-uartlite-1.00.a"))
Unnamed repository; edit this file 'description' to name the repository.