Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
authorLinus Torvalds <torvalds@linux-foundation.org>
Sat, 14 Mar 2009 19:01:37 +0000 (12:01 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Sat, 14 Mar 2009 19:01:37 +0000 (12:01 -0700)
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (31 commits)
  [SCSI] qla2xxx: Update version number to 8.03.00-k4.
  [SCSI] qla2xxx: Correct overwrite of pre-assigned init-control-block structure size.
  [SCSI] qla2xxx: Correct truncation in return-code status checking.
  [SCSI] qla2xxx: Correct vport delete bug.
  [SCSI] qla2xxx: Use correct value for max vport in LOOP topology.
  [SCSI] qla2xxx: Correct address range checking for option-rom updates.
  [SCSI] fcoe: Change fcoe receive thread nice value from 19 (lowest priority) to -20
  [SCSI] fcoe: fix handling of pending queue, prevent out of order frames (v3)
  [SCSI] fcoe: Out of order tx frames was causing several check condition SCSI status
  [SCSI] fcoe: fix kfree(skb)
  [SCSI] fcoe: ETH_P_8021Q is already in if_ether and fcoe is not using it anyway
  [SCSI] libfc: do not change the fh_rx_id of a recevied frame
  [SCSI] fcoe: Correct fcoe_transports initialization vs. registration
  [SCSI] fcoe: Use setup_timer() and mod_timer()
  [SCSI] libfc, fcoe: Remove unnecessary cast by removing inline wrapper
  [SCSI] libfc, fcoe: Cleanup function formatting and minor typos
  [SCSI] libfc, fcoe: Fix kerneldoc comments
  [SCSI] libfc: Cleanup libfc_function_template comments
  [SCSI] libfc: check for err when recv and state is incorrect
  [SCSI] libfc: rename rp to rdata in fc_disc_new_target()
  ...

347 files changed:
Documentation/RCU/checklist.txt
Documentation/feature-removal-schedule.txt
Documentation/filesystems/ext2.txt
Documentation/filesystems/ext3.txt
Documentation/filesystems/squashfs.txt
Documentation/hwmon/lm90
Documentation/networking/ipv6.txt [new file with mode: 0644]
MAINTAINERS
Makefile
arch/arm/mach-at91/at91sam9263_devices.c
arch/arm/mach-at91/include/mach/board.h
arch/arm/mach-omap2/board-ldp.c
arch/blackfin/Kconfig
arch/blackfin/Kconfig.debug
arch/blackfin/configs/BF518F-EZBRD_defconfig
arch/blackfin/configs/BF527-EZKIT_defconfig
arch/blackfin/configs/BF533-EZKIT_defconfig
arch/blackfin/configs/BF533-STAMP_defconfig
arch/blackfin/configs/BF537-STAMP_defconfig
arch/blackfin/configs/BF538-EZKIT_defconfig
arch/blackfin/configs/BF548-EZKIT_defconfig
arch/blackfin/configs/BF561-EZKIT_defconfig
arch/blackfin/configs/BlackStamp_defconfig
arch/blackfin/configs/CM-BF527_defconfig
arch/blackfin/configs/CM-BF548_defconfig
arch/blackfin/configs/IP0X_defconfig
arch/blackfin/configs/SRV1_defconfig
arch/blackfin/include/asm/Kbuild
arch/blackfin/include/asm/bfin_sport.h
arch/blackfin/include/asm/ipipe.h
arch/blackfin/include/asm/ipipe_base.h
arch/blackfin/include/asm/irq.h
arch/blackfin/include/asm/thread_info.h
arch/blackfin/kernel/Makefile
arch/blackfin/kernel/cplb-nompu/cplbinit.c
arch/blackfin/kernel/ipipe.c
arch/blackfin/kernel/irqchip.c
arch/blackfin/kernel/kgdb_test.c
arch/blackfin/kernel/ptrace.c
arch/blackfin/kernel/setup.c
arch/blackfin/kernel/time.c
arch/blackfin/mach-bf518/boards/ezbrd.c
arch/blackfin/mach-bf518/include/mach/anomaly.h
arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
arch/blackfin/mach-bf527/boards/cm_bf527.c
arch/blackfin/mach-bf527/boards/ezbrd.c
arch/blackfin/mach-bf527/include/mach/anomaly.h
arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
arch/blackfin/mach-bf533/boards/Kconfig
arch/blackfin/mach-bf533/boards/Makefile
arch/blackfin/mach-bf533/boards/blackstamp.c
arch/blackfin/mach-bf533/boards/cm_bf533.c
arch/blackfin/mach-bf533/boards/generic_board.c [deleted file]
arch/blackfin/mach-bf533/boards/ip0x.c
arch/blackfin/mach-bf533/include/mach/anomaly.h
arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
arch/blackfin/mach-bf537/boards/Kconfig
arch/blackfin/mach-bf537/boards/Makefile
arch/blackfin/mach-bf537/boards/cm_bf537.c
arch/blackfin/mach-bf537/boards/generic_board.c [deleted file]
arch/blackfin/mach-bf537/boards/minotaur.c
arch/blackfin/mach-bf537/boards/pnav10.c
arch/blackfin/mach-bf537/boards/tcm_bf537.c
arch/blackfin/mach-bf537/include/mach/anomaly.h
arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
arch/blackfin/mach-bf538/include/mach/anomaly.h
arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
arch/blackfin/mach-bf548/include/mach/anomaly.h
arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
arch/blackfin/mach-bf548/include/mach/irq.h
arch/blackfin/mach-bf561/boards/Kconfig
arch/blackfin/mach-bf561/boards/Makefile
arch/blackfin/mach-bf561/boards/cm_bf561.c
arch/blackfin/mach-bf561/boards/generic_board.c [deleted file]
arch/blackfin/mach-bf561/include/mach/anomaly.h
arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
arch/blackfin/mach-common/arch_checks.c
arch/blackfin/mach-common/cache.S
arch/blackfin/mach-common/clocks-init.c
arch/blackfin/mach-common/dpmc_modes.S
arch/blackfin/mach-common/entry.S
arch/blackfin/mach-common/interrupt.S
arch/blackfin/mach-common/ints-priority.c
arch/blackfin/mach-common/smp.c
arch/blackfin/mm/init.c
arch/ia64/sn/pci/pcibr/pcibr_dma.c
arch/m68knommu/platform/5206e/config.c
arch/m68knommu/platform/528x/config.c
arch/mips/configs/ip27_defconfig
arch/mips/configs/jmr3927_defconfig
arch/mips/configs/rbtx49xx_defconfig
arch/mips/include/asm/compat.h
arch/mips/include/asm/hazards.h
arch/mips/include/asm/prefetch.h
arch/mips/kernel/cpu-probe.c
arch/mips/kernel/linux32.c
arch/mips/mm/page.c
arch/mips/mm/tlbex.c
arch/parisc/configs/712_defconfig
arch/parisc/configs/a500_defconfig
arch/parisc/configs/b180_defconfig
arch/parisc/configs/c3000_defconfig
arch/parisc/configs/default_defconfig
arch/parisc/hpux/fs.c
arch/parisc/include/asm/assembly.h
arch/parisc/include/asm/io.h
arch/parisc/include/asm/irq.h
arch/parisc/include/asm/uaccess.h
arch/parisc/kernel/cache.c
arch/parisc/kernel/entry.S
arch/parisc/kernel/firmware.c
arch/parisc/kernel/irq.c
arch/parisc/kernel/pci-dma.c
arch/parisc/mm/init.c
arch/powerpc/configs/40x/virtex_defconfig
arch/powerpc/configs/44x/virtex5_defconfig
arch/powerpc/configs/linkstation_defconfig
arch/powerpc/configs/storcenter_defconfig
arch/powerpc/platforms/embedded6xx/linkstation.c
arch/powerpc/platforms/embedded6xx/storcenter.c
arch/sh/boards/board-ap325rxa.c
arch/sparc/kernel/irq_64.c
arch/um/kernel/ptrace.c
arch/um/os-Linux/user_syms.c
arch/x86/include/asm/efi.h
arch/x86/include/asm/fixmap_64.h
arch/x86/include/asm/i387.h
arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
arch/x86/kernel/ds.c
arch/x86/kernel/efi.c
arch/x86/kernel/efi_64.c
arch/x86/kernel/i387.c
arch/x86/kernel/reboot.c
arch/x86/kernel/setup.c
arch/x86/lguest/boot.c
arch/x86/math-emu/fpu_aux.c
arch/x86/mm/kmmio.c
arch/x86/mm/pageattr.c
arch/xtensa/Kconfig
arch/xtensa/kernel/setup.c
arch/xtensa/kernel/traps.c
arch/xtensa/mm/fault.c
arch/xtensa/platforms/iss/console.c
block/blk-merge.c
drivers/ata/ahci.c
drivers/ata/ata_piix.c
drivers/ata/libata-core.c
drivers/ata/libata-eh.c
drivers/ata/libata-sff.c
drivers/ata/sata_mv.c
drivers/ata/sata_nv.c
drivers/base/node.c
drivers/block/aoe/aoedev.c
drivers/block/cciss.c
drivers/block/loop.c
drivers/block/xen-blkfront.c
drivers/char/agp/amd64-agp.c
drivers/char/agp/intel-agp.c
drivers/char/agp/parisc-agp.c
drivers/char/hvcs.c
drivers/char/hvsi.c
drivers/cpufreq/cpufreq.c
drivers/dca/dca-core.c
drivers/dma/dmatest.c
drivers/dma/fsldma.c
drivers/dma/ioat.c
drivers/dma/ioat_dca.c
drivers/dma/ioat_dma.c
drivers/dma/ioatdma.h
drivers/dma/ioatdma_hw.h
drivers/dma/ioatdma_registers.h
drivers/dma/iop-adma.c
drivers/dma/ipu/ipu_idmac.c
drivers/dma/mv_xor.c
drivers/gpu/drm/i915/i915_dma.c
drivers/gpu/drm/i915/i915_drv.h
drivers/gpu/drm/i915/i915_gem.c
drivers/gpu/drm/i915/i915_reg.h
drivers/gpu/drm/i915/i915_suspend.c
drivers/hwmon/Kconfig
drivers/hwmon/abituguru3.c
drivers/hwmon/f75375s.c
drivers/hwmon/it87.c
drivers/hwmon/lm85.c
drivers/hwmon/lm90.c
drivers/ide/Kconfig
drivers/ide/Makefile
drivers/ide/at91_ide.c [new file with mode: 0644]
drivers/ide/ide-atapi.c
drivers/ide/ide-disk_proc.c
drivers/ide/ide-dma.c
drivers/ide/ide-floppy.c
drivers/ide/ide-floppy_proc.c
drivers/ide/ide-io.c
drivers/ide/ide-iops.c
drivers/ide/ide-probe.c
drivers/ide/ide-proc.c
drivers/ide/ide-tape.c
drivers/infiniband/hw/nes/nes_cm.c
drivers/infiniband/hw/nes/nes_verbs.c
drivers/infiniband/hw/nes/nes_verbs.h
drivers/lguest/lguest_device.c
drivers/md/md.c
drivers/media/dvb/bt8xx/dst.c
drivers/media/dvb/dvb-core/dvb_frontend.c
drivers/media/dvb/frontends/stb0899_algo.c
drivers/media/dvb/frontends/stb0899_drv.c
drivers/media/dvb/frontends/stb0899_priv.h
drivers/media/dvb/frontends/stb6100.c
drivers/media/dvb/frontends/zl10353.c
drivers/media/dvb/frontends/zl10353.h
drivers/media/video/gspca/m5602/m5602_s5k4aa.c
drivers/media/video/saa7134/saa7134-dvb.c
drivers/media/video/tvaudio.c
drivers/media/video/zoran/Kconfig
drivers/mfd/wm8350-core.c
drivers/mmc/core/mmc_ops.c
drivers/mmc/host/s3cmci.c
drivers/mtd/devices/mtd_dataflash.c
drivers/mtd/maps/physmap.c
drivers/net/arm/ks8695net.c
drivers/net/bonding/bond_main.c
drivers/net/jme.c
drivers/net/pcmcia/3c574_cs.c
drivers/net/pcmcia/3c589_cs.c
drivers/net/smc911x.h
drivers/net/sungem.c
drivers/net/sunhme.c
drivers/net/tg3.c
drivers/net/tokenring/tmspci.c
drivers/net/ucc_geth_mii.c
drivers/net/usb/dm9601.c
drivers/net/wireless/iwlwifi/iwl-agn.c
drivers/net/wireless/iwlwifi/iwl3945-base.c
drivers/net/wireless/p54/p54common.c
drivers/net/wireless/rt2x00/rt2500usb.c
drivers/net/wireless/rt2x00/rt73usb.c
drivers/parisc/dino.c
drivers/parisc/gsc.c
drivers/parisc/iosapic.c
drivers/parisc/lba_pci.c
drivers/parisc/sba_iommu.c
drivers/pci/hotplug/Kconfig
drivers/pci/pcie/aer/aerdrv_core.c
drivers/pci/pcie/portdrv_pci.c
drivers/pci/quirks.c
drivers/platform/x86/acer-wmi.c
drivers/power/ds2760_battery.c
drivers/sbus/char/bbc_i2c.c
drivers/sbus/char/jsflash.c
drivers/scsi/lasi700.c
drivers/scsi/zalon.c
drivers/video/aty/aty128fb.c
drivers/video/aty/radeon_pm.c
drivers/video/i810/i810_main.c
drivers/video/sh_mobile_lcdcfb.c
drivers/w1/masters/w1-gpio.c
drivers/watchdog/gef_wdt.c
drivers/watchdog/ks8695_wdt.c
drivers/watchdog/orion5x_wdt.c
drivers/watchdog/rc32434_wdt.c
fs/btrfs/ctree.c
fs/btrfs/disk-io.c
fs/btrfs/extent-tree.c
fs/btrfs/locking.c
fs/btrfs/locking.h
fs/devpts/inode.c
fs/ecryptfs/crypto.c
fs/ecryptfs/ecryptfs_kernel.h
fs/ecryptfs/keystore.c
fs/ecryptfs/main.c
fs/ext4/ialloc.c
fs/fat/inode.c
fs/fs-writeback.c
fs/inode.c
fs/lockd/clntlock.c
fs/nfs/client.c
fs/nfs/dir.c
fs/nfs/nfs3acl.c
fs/nfs/nfs3xdr.c
fs/nfs/nfs4namespace.c
fs/ocfs2/alloc.c
fs/ocfs2/aops.c
fs/ocfs2/namei.c
fs/ocfs2/ocfs2_fs.h
fs/ocfs2/xattr.c
fs/pipe.c
fs/proc/page.c
fs/ramfs/file-nommu.c
fs/squashfs/block.c
fs/squashfs/cache.c
fs/squashfs/inode.c
fs/squashfs/squashfs.h
fs/squashfs/super.c
fs/super.c
fs/xfs/linux-2.6/xfs_buf.c
fs/xfs/linux-2.6/xfs_buf.h
fs/xfs/linux-2.6/xfs_super.c
fs/xfs/xfs_iget.c
fs/xfs/xfs_log_recover.c
include/drm/drm_edid.h
include/linux/ata.h
include/linux/cpufreq.h
include/linux/dmaengine.h
include/linux/hdreg.h
include/linux/ide.h
include/linux/libata.h
include/linux/lockd/lockd.h
include/linux/mm_types.h
include/linux/netdevice.h
include/linux/nfs_xdr.h
include/linux/nfsacl.h
include/linux/sched.h
include/linux/serio.h
include/net/net_namespace.h
init/Kconfig
kernel/fork.c
kernel/softirq.c
kernel/tsacct.c
kernel/user.c
lib/bitmap.c
lib/idr.c
mm/vmscan.c
net/802/tr.c
net/8021q/vlan_dev.c
net/core/dev.c
net/core/net-sysfs.c
net/core/net_namespace.c
net/ipv4/icmp.c
net/ipv4/tcp_ipv4.c
net/ipv6/addrconf.c
net/ipv6/af_inet6.c
net/netlink/af_netlink.c
net/sched/act_police.c
net/sctp/protocol.c
net/sctp/sm_sideeffect.c
net/sctp/sm_statefuns.c
net/sunrpc/sched.c
net/sunrpc/xprt.c
net/sunrpc/xprtsock.c
net/wireless/reg.c
scripts/package/Makefile
scripts/package/mkspec
scripts/unifdef.c
security/smack/smack_lsm.c
security/smack/smackfs.c
sound/pci/hda/patch_sigmatel.c

index 6e253407b3dc1f83d85076dae39d405a29ec6716..accfe2f5247d34cea4c659fd499746f08751a6eb 100644 (file)
@@ -298,3 +298,15 @@ over a rather long period of time, but improvements are always welcome!
 
        Note that, rcu_assign_pointer() and rcu_dereference() relate to
        SRCU just as they do to other forms of RCU.
+
+15.    The whole point of call_rcu(), synchronize_rcu(), and friends
+       is to wait until all pre-existing readers have finished before
+       carrying out some otherwise-destructive operation.  It is
+       therefore critically important to -first- remove any path
+       that readers can follow that could be affected by the
+       destructive operation, and -only- -then- invoke call_rcu(),
+       synchronize_rcu(), or friends.
+
+       Because these primitives only wait for pre-existing readers,
+       it is the caller's responsibility to guarantee safety to
+       any subsequent readers.
index 5ddbe350487acad3a92bc70b057da477901cdc1c..20d3b94703a463931907c8365d93156c2ebf7279 100644 (file)
@@ -335,3 +335,12 @@ Why:       In 2.6.18 the Secmark concept was introduced to replace the "compat_net"
        Secmark, it is time to deprecate the older mechanism and start the
        process of removing the old code.
 Who:   Paul Moore <paul.moore@hp.com>
+---------------------------
+
+What:  sysfs ui for changing p4-clockmod parameters
+When:  September 2009
+Why:   See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and
+       e088e4c9cdb618675874becb91b2fd581ee707e6.
+       Removal is subject to fixing any remaining bugs in ACPI which may
+       cause the thermal throttling not to happen at the right time.
+Who:   Dave Jones <davej@redhat.com>, Matthew Garrett <mjg@redhat.com>
index 4333e836c4951459d9145213938bbca78644d63d..23448551cabed2765eedc123dda88883e7cbc862 100644 (file)
@@ -373,10 +373,10 @@ Filesystem Resizing       http://ext2resize.sourceforge.net/
 Compression (*)                http://e2compr.sourceforge.net/
 
 Implementations for:
-Windows 95/98/NT/2000  http://uranus.it.swin.edu.au/~jn/linux/Explore2fs.htm
-Windows 95 (*)         http://www.yipton.demon.co.uk/content.html#FSDEXT2
+Windows 95/98/NT/2000  http://www.chrysocome.net/explore2fs
+Windows 95 (*)         http://www.yipton.net/content.html#FSDEXT2
 DOS client (*)         ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/
-OS/2                   http://perso.wanadoo.fr/matthieu.willm/ext2-os2/
-RISC OS client         ftp://ftp.barnet.ac.uk/pub/acorn/armlinux/iscafs/
+OS/2 (*)               ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/
+RISC OS client         http://www.esw-heim.tu-clausthal.de/~marco/smorbrod/IscaFS/
 
-(*) no longer actively developed/supported (as of Apr 2001)
+(*) no longer actively developed/supported (as of Mar 2009)
index 9dd2a3bb2acc87b85d473a2080284910f04f8585..e5f3833a6ef8f53c3b22adf48d57b84e2a24ba0c 100644 (file)
@@ -198,5 +198,5 @@ kernel source:      <file:fs/ext3/>
 programs:      http://e2fsprogs.sourceforge.net/
                http://ext2resize.sourceforge.net
 
-useful links:  http://www-106.ibm.com/developerworks/linux/library/l-fs7/
-               http://www-106.ibm.com/developerworks/linux/library/l-fs8/
+useful links:  http://www.ibm.com/developerworks/library/l-fs7.html
+               http://www.ibm.com/developerworks/library/l-fs8.html
index 3e79e4a7a3920ac659ad2b3b76ed339aaf04e9f3..b324c033035ad097fda59b86897ae0720df9f09b 100644 (file)
@@ -22,7 +22,7 @@ Squashfs filesystem features versus Cramfs:
 
                                Squashfs                Cramfs
 
-Max filesystem size:           2^64                    16 MiB
+Max filesystem size:           2^64                    256 MiB
 Max file size:                 ~ 2 TiB                 16 MiB
 Max files:                     unlimited               unlimited
 Max directories:               unlimited               unlimited
index 0e8411710238ff3c0a58c1f373031f3f7447ce5c..93d8e3d5515018e490629da68423c03ac9565e02 100644 (file)
@@ -42,6 +42,11 @@ Supported chips:
     Addresses scanned: I2C 0x4e
     Datasheet: Publicly available at the Maxim website
                http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497
+  * Maxim MAX6648
+    Prefix: 'max6646'
+    Addresses scanned: I2C 0x4c
+    Datasheet: Publicly available at the Maxim website
+               http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
   * Maxim MAX6649
     Prefix: 'max6646'
     Addresses scanned: I2C 0x4c
@@ -74,6 +79,11 @@ Supported chips:
                            0x4c, 0x4d and 0x4e
     Datasheet: Publicly available at the Maxim website
                http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3370
+  * Maxim MAX6692
+    Prefix: 'max6646'
+    Addresses scanned: I2C 0x4c
+    Datasheet: Publicly available at the Maxim website
+               http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
 
 
 Author: Jean Delvare <khali@linux-fr.org>
diff --git a/Documentation/networking/ipv6.txt b/Documentation/networking/ipv6.txt
new file mode 100644 (file)
index 0000000..268e5c1
--- /dev/null
@@ -0,0 +1,35 @@
+
+Options for the ipv6 module are supplied as parameters at load time.
+
+Module options may be given as command line arguments to the insmod
+or modprobe command, but are usually specified in either the
+/etc/modules.conf or /etc/modprobe.conf configuration file, or in a
+distro-specific configuration file.
+
+The available ipv6 module parameters are listed below.  If a parameter
+is not specified the default value is used.
+
+The parameters are as follows:
+
+disable
+
+       Specifies whether to load the IPv6 module, but disable all
+       its functionality.  This might be used when another module
+       has a dependency on the IPv6 module being loaded, but no
+       IPv6 addresses or operations are desired.
+
+       The possible values and their effects are:
+
+       0
+               IPv6 is enabled.
+
+               This is the default value.
+
+       1
+               IPv6 is disabled.
+
+               No IPv6 addresses will be added to interfaces, and
+               it will not be possible to open an IPv6 socket.
+
+               A reboot is required to enable IPv6.
+
index 1c2ca1dc66f2006765dba54bb05edf8a5b57d258..4a1cfca49685c8d230302aa2c20d794ffac75239 100644 (file)
@@ -1469,8 +1469,6 @@ L:        linux-acpi@vger.kernel.org
 S:     Supported
 
 DOCUMENTATION (/Documentation directory)
-P:     Michael Kerrisk
-M:     mtk.manpages@gmail.com
 P:     Randy Dunlap
 M:     rdunlap@xenotime.net
 L:     linux-doc@vger.kernel.org
@@ -2879,7 +2877,7 @@ P:        Michael Kerrisk
 M:     mtk.manpages@gmail.com
 W:     http://www.kernel.org/doc/man-pages
 L:     linux-man@vger.kernel.org
-S:     Supported
+S:     Maintained
 
 MARVELL LIBERTAS WIRELESS DRIVER
 P:     Dan Williams
@@ -3352,10 +3350,8 @@ S:       Maintained
 PARISC ARCHITECTURE
 P:     Kyle McMartin
 M:     kyle@mcmartin.ca
-P:     Matthew Wilcox
-M:     matthew@wil.cx
-P:     Grant Grundler
-M:     grundler@parisc-linux.org
+P:     Helge Deller
+M:     deller@gmx.de
 L:     linux-parisc@vger.kernel.org
 W:     http://www.parisc-linux.org/
 T:     git kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6.git
index d04ee0ad1dccce7ea2503637ffbe6d8753074ffe..2e2f4a4324af777e66ffd333f7b3e44c8d5e243b 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 29
-EXTRAVERSION = -rc7
+EXTRAVERSION = -rc8
 NAME = Erotic Pickled Herring
 
 # *DOCUMENTATION*
@@ -904,12 +904,18 @@ localver = $(subst $(space),, $(string) \
 # and if the SCM is know a tag from the SCM is appended.
 # The appended tag is determined by the SCM used.
 #
-# Currently, only git is supported.
-# Other SCMs can edit scripts/setlocalversion and add the appropriate
-# checks as needed.
+# .scmversion is used when generating rpm packages so we do not loose
+# the version information from the SCM when we do the build of the kernel
+# from the copied source
 ifdef CONFIG_LOCALVERSION_AUTO
-       _localver-auto = $(shell $(CONFIG_SHELL) \
-                         $(srctree)/scripts/setlocalversion $(srctree))
+
+ifeq ($(wildcard .scmversion),)
+        _localver-auto = $(shell $(CONFIG_SHELL) \
+                         $(srctree)/scripts/setlocalversion $(srctree))
+else
+        _localver-auto = $(shell cat .scmversion 2> /dev/null)
+endif
+
        localver-auto  = $(LOCALVERSION)$(_localver-auto)
 endif
 
@@ -1537,7 +1543,7 @@ quiet_cmd_depmod = DEPMOD  $(KERNELRELEASE)
       cmd_depmod = \
        if [ -r System.map -a -x $(DEPMOD) ]; then                              \
                $(DEPMOD) -ae -F System.map                                     \
-               $(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) -r)   \
+               $(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) )     \
                $(KERNELRELEASE);                                               \
        fi
 
index 134af97ff3403f1c309b4b6c962665c860fa796d..b7f23324231560635b0d053ac7fac703a249e19f 100644 (file)
@@ -347,6 +347,111 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 #endif
 
+/* --------------------------------------------------------------------
+ *  Compact Flash (PCMCIA or IDE)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \
+    defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
+
+static struct at91_cf_data cf0_data;
+
+static struct resource cf0_resources[] = {
+       [0] = {
+               .start  = AT91_CHIPSELECT_4,
+               .end    = AT91_CHIPSELECT_4 + SZ_256M - 1,
+               .flags  = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
+       }
+};
+
+static struct platform_device cf0_device = {
+       .id             = 0,
+       .dev            = {
+                               .platform_data  = &cf0_data,
+       },
+       .resource       = cf0_resources,
+       .num_resources  = ARRAY_SIZE(cf0_resources),
+};
+
+static struct at91_cf_data cf1_data;
+
+static struct resource cf1_resources[] = {
+       [0] = {
+               .start  = AT91_CHIPSELECT_5,
+               .end    = AT91_CHIPSELECT_5 + SZ_256M - 1,
+               .flags  = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
+       }
+};
+
+static struct platform_device cf1_device = {
+       .id             = 1,
+       .dev            = {
+                               .platform_data  = &cf1_data,
+       },
+       .resource       = cf1_resources,
+       .num_resources  = ARRAY_SIZE(cf1_resources),
+};
+
+void __init at91_add_device_cf(struct at91_cf_data *data)
+{
+       unsigned long ebi0_csa;
+       struct platform_device *pdev;
+
+       if (!data)
+               return;
+
+       /*
+        * assign CS4 or CS5 to SMC with Compact Flash logic support,
+        * we assume SMC timings are configured by board code,
+        * except True IDE where timings are controlled by driver
+        */
+       ebi0_csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
+       switch (data->chipselect) {
+       case 4:
+               at91_set_A_periph(AT91_PIN_PD6, 0);  /* EBI0_NCS4/CFCS0 */
+               ebi0_csa |= AT91_MATRIX_EBI0_CS4A_SMC_CF1;
+               cf0_data = *data;
+               pdev = &cf0_device;
+               break;
+       case 5:
+               at91_set_A_periph(AT91_PIN_PD7, 0);  /* EBI0_NCS5/CFCS1 */
+               ebi0_csa |= AT91_MATRIX_EBI0_CS5A_SMC_CF2;
+               cf1_data = *data;
+               pdev = &cf1_device;
+               break;
+       default:
+               printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
+                      data->chipselect);
+               return;
+       }
+       at91_sys_write(AT91_MATRIX_EBI0CSA, ebi0_csa);
+
+       if (data->det_pin) {
+               at91_set_gpio_input(data->det_pin, 1);
+               at91_set_deglitch(data->det_pin, 1);
+       }
+
+       if (data->irq_pin) {
+               at91_set_gpio_input(data->irq_pin, 1);
+               at91_set_deglitch(data->irq_pin, 1);
+       }
+
+       if (data->vcc_pin)
+               /* initially off */
+               at91_set_gpio_output(data->vcc_pin, 0);
+
+       /* enable EBI controlled pins */
+       at91_set_A_periph(AT91_PIN_PD5, 1);  /* NWAIT */
+       at91_set_A_periph(AT91_PIN_PD8, 0);  /* CFCE1 */
+       at91_set_A_periph(AT91_PIN_PD9, 0);  /* CFCE2 */
+       at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */
+
+       pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf";
+       platform_device_register(pdev);
+}
+#else
+void __init at91_add_device_cf(struct at91_cf_data *data) {}
+#endif
 
 /* --------------------------------------------------------------------
  *  NAND / SmartMedia
index 0b3ae21b4565abb471fbedd59c15c96a3e4450f5..793fe7b25f367653292110e5936c1c8b4bcdc3d8 100644 (file)
@@ -56,6 +56,9 @@ struct at91_cf_data {
        u8      vcc_pin;                /* power switching */
        u8      rst_pin;                /* card reset */
        u8      chipselect;             /* EBI Chip Select number */
+       u8      flags;
+#define AT91_CF_TRUE_IDE       0x01
+#define AT91_IDE_SWAP_A0_A2    0x02
 };
 extern void __init at91_add_device_cf(struct at91_cf_data *data);
 
index f6a13451d1fdd10ef9845e6dec4587c9660047b7..6031e179926bf66a5a45b8e560df5f63cb0d884c 100644 (file)
@@ -81,7 +81,7 @@ static inline void __init ldp_init_smc911x(void)
        }
 
        ldp_smc911x_resources[0].start = cs_mem_base + 0x0;
-       ldp_smc911x_resources[0].end   = cs_mem_base + 0xf;
+       ldp_smc911x_resources[0].end   = cs_mem_base + 0xff;
        udelay(100);
 
        eth_gpio = LDP_SMC911X_GPIO;
index 8f1f97d56e1ecfec191b185350e7f374cd0df00b..0c1f86e3e44a0bfa99700609e69dfe82551e3f3e 100644 (file)
@@ -1129,6 +1129,7 @@ endchoice
 
 config PM_WAKEUP_BY_GPIO
        bool "Allow Wakeup from Standby by GPIO"
+       depends on PM && !BF54x
 
 config PM_WAKEUP_GPIO_NUMBER
        int "GPIO number"
@@ -1168,6 +1169,12 @@ config PM_BFIN_WAKE_GP
        default n
        help
          Enable General-Purpose Wake-Up (Voltage Regulator Power-Up)
+         (all processors, except ADSP-BF549). This option sets
+         the general-purpose wake-up enable (GPWE) control bit to enable
+         wake-up upon detection of an active low signal on the /GPW (PH7) pin.
+         On ADSP-BF549 this option enables the the same functionality on the
+         /MRXON pin also PH7.
+
 endmenu
 
 menu "CPU Frequency scaling"
index 5f981d9ca625c4540ef6090e68d25d137ec29793..79e7e63ab70985ddea291a2656052dcd6f8a2c5c 100644 (file)
@@ -21,12 +21,6 @@ config DEBUG_STACK_USAGE
 config HAVE_ARCH_KGDB
        def_bool y
 
-config KGDB_TESTCASE
-       tristate "KGDB: for test case in expect"
-       default n
-       help
-         This is a kgdb test case for automated testing.
-
 config DEBUG_VERBOSE
        bool "Verbose fault messages"
        default y
index 4fdb9e04759f779abdcfaa6d6ee2e932a7e41ca7..281f4b60e603fe52cb8327d9069c081a183f824a 100644 (file)
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Fri Jan  9 17:58:41 2009
+# Linux kernel version: 2.6.28
+# Fri Feb 20 10:01:44 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -133,10 +133,15 @@ CONFIG_BF518=y
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
 # CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
 # CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
 # CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
 # CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
 # CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=0
 CONFIG_BF_REV_MAX=2
@@ -426,7 +431,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
+CONFIG_NET_DSA=y
+# CONFIG_NET_DSA_TAG_DSA is not set
+# CONFIG_NET_DSA_TAG_EDSA is not set
+# CONFIG_NET_DSA_TAG_TRAILER is not set
+CONFIG_NET_DSA_TAG_STPID=y
+# CONFIG_NET_DSA_MV88E6XXX is not set
+# CONFIG_NET_DSA_MV88E6060 is not set
+# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
+# CONFIG_NET_DSA_MV88E6131 is not set
+# CONFIG_NET_DSA_MV88E6123_61_65 is not set
+CONFIG_NET_DSA_KSZ8893M=y
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -529,6 +544,8 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -561,7 +578,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -607,6 +626,7 @@ CONFIG_BFIN_RX_DESC_NUM=20
 # CONFIG_SMC91X is not set
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -764,7 +784,23 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -788,8 +824,10 @@ CONFIG_BFIN_WDT=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -861,10 +899,18 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
@@ -1062,12 +1108,20 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_KGDB_TESTCASE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
 # CONFIG_DEBUG_HWERR is not set
@@ -1100,6 +1154,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
index 833128b3972496931aaa2028751bfaab52d8ba2b..a50050f17706efdf17de663ef30289b6c605a224 100644 (file)
@@ -327,8 +327,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
index 334c94b51c402fb11af7e25be76d9b27f40f1c99..0a2a00d638872361d6d2f6fec0a6ccf22d34e16a 100644 (file)
@@ -290,8 +290,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
index 9d733436e3009ed0e8fbdb0eeb53a1a051156bd2..eb027587a355d4095e939c769c3ab5ec7c014bc9 100644 (file)
@@ -290,8 +290,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
index 4fb4108d310322fbc9b82dc0e02d51a5fc461d67..9e62b9f40eb1ce8eec06ae8b1115214b538100f9 100644 (file)
@@ -298,8 +298,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
@@ -568,15 +568,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_BFIN is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-CONFIG_MTD_NAND_PLATFORM=m
+# CONFIG_MTD_NAND is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
index cb32f5624a1b5b859bfbd23ed0f352fa99030a71..dd6ad6be1c872d4f271d58b80ae624cf908d31d0 100644 (file)
@@ -306,8 +306,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
index 0f8697618aa5605f29e52774e7db0d3bde4fb37a..6bc2fb1b2a70bb5e03ea25f2ad6b66e6ded1105d 100644 (file)
@@ -361,8 +361,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_BFIN_L2_CACHEABLE is not set
 # CONFIG_MPU is not set
 
@@ -680,7 +680,7 @@ CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
 
 #
 # SCSI support type (disk, tape, CD-ROM)
index 042c7adfccfa994e42baba76eed0a56c081be836..69714fb3e608eb933b9f08ffdb70f27c61a50c26 100644 (file)
@@ -329,8 +329,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_BFIN_L2_CACHEABLE is not set
 # CONFIG_MPU is not set
 
index 3a20e281d23c7d26a79c18ce6e97d3c2d48c77dd..017c6ea071b5f1b42dffbebd478a8ed380a609ec 100644 (file)
@@ -288,8 +288,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
index 865ed85a5760e4ce27ac4d848c074fe8865dca6a..d880ef786770e3c4ab367a061e3d6e8379b428b1 100644 (file)
@@ -332,8 +332,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
index efe9741b1f146dd51e670a8c674741500bba5ac2..f410430b4e3d79a71e5ee2feaf0db29b1e3e5dc0 100644 (file)
@@ -336,8 +336,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 CONFIG_L1_MAX_PIECE=16
 # CONFIG_MPU is not set
 
@@ -595,7 +595,7 @@ CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
 
 #
 # SCSI support type (disk, tape, CD-ROM)
index eae83b5de92f1ceca0360c9f2d4f130840c79713..7db93874c9875cfada3c72cb4138927f9840e9f0 100644 (file)
@@ -612,7 +612,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_SCSI=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
 
 #
 # SCSI support type (disk, tape, CD-ROM)
index fa580affc9d6eaa26779e5182946ae2ff481e5e5..a46529c6ade337d406f7037e2e2d8b6ebdd919fe 100644 (file)
@@ -282,8 +282,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 CONFIG_L1_MAX_PIECE=16
 
 #
index 606ecfdcc962e19dc68a8af35d730b2623603ebf..09c31418cc08dda85cb646998995bff825d00dbe 100644 (file)
@@ -1,3 +1,4 @@
 include include/asm-generic/Kbuild.asm
 
+unifdef-y += bfin_sport.h
 unifdef-y += fixed_code.h
index fe88a2c19213285ca49ceb17a38c756ae95b9682..65a651db5b072bf72d22b544ac9d3f1b7a809056 100644 (file)
@@ -1,30 +1,9 @@
 /*
- * File:         include/asm-blackfin/bfin_sport.h
- * Based on:
- * Author:       Roy Huang (roy.huang@analog.com)
+ * bfin_sport.h - userspace header for bfin sport driver
  *
- * Created:      Thu Aug. 24 2006
- * Description:
+ * Copyright 2004-2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __BFIN_SPORT_H__
 #define NORM_FORMAT    0x0
 #define ALAW_FORMAT    0x2
 #define ULAW_FORMAT    0x3
-struct sport_register;
 
 /* Function driver which use sport must initialize the structure */
 struct sport_config {
-       /*TDM (multichannels), I2S or other mode */
+       /* TDM (multichannels), I2S or other mode */
        unsigned int mode:3;
 
        /* if TDM mode is selected, channels must be set */
@@ -72,12 +50,18 @@ struct sport_config {
        int serial_clk;
        int fsync_clk;
 
-       unsigned int data_format:2;     /*Normal, u-law or a-law */
+       unsigned int data_format:2;     /* Normal, u-law or a-law */
 
        int word_len;           /* How length of the word in bits, 3-32 bits */
        int dma_enabled;
 };
 
+/* Userspace interface */
+#define SPORT_IOC_MAGIC                'P'
+#define SPORT_IOC_CONFIG       _IOWR('P', 0x01, struct sport_config)
+
+#ifdef __KERNEL__
+
 struct sport_register {
        unsigned short tcr1;
        unsigned short reserved0;
@@ -117,9 +101,6 @@ struct sport_register {
        unsigned long mrcs3;
 };
 
-#define SPORT_IOC_MAGIC                'P'
-#define SPORT_IOC_CONFIG       _IOWR('P', 0x01, struct sport_config)
-
 struct sport_dev {
        struct cdev cdev;       /* Char device structure */
 
@@ -149,6 +130,8 @@ struct sport_dev {
        struct sport_config config;
 };
 
+#endif
+
 #define SPORT_TCR1     0
 #define        SPORT_TCR2      1
 #define        SPORT_TCLKDIV   2
@@ -169,4 +152,4 @@ struct sport_dev {
 #define SPORT_MRCS2    22
 #define SPORT_MRCS3    23
 
-#endif                         /*__BFIN_SPORT_H__*/
+#endif
index 76f53d8b9a0d2e25650d34bc48c9b46cef536721..343b56361ec98db86252f75a3e0f01f07bbea7c1 100644 (file)
@@ -35,9 +35,9 @@
 #include <asm/atomic.h>
 #include <asm/traps.h>
 
-#define IPIPE_ARCH_STRING     "1.8-00"
+#define IPIPE_ARCH_STRING     "1.9-00"
 #define IPIPE_MAJOR_NUMBER    1
-#define IPIPE_MINOR_NUMBER    8
+#define IPIPE_MINOR_NUMBER    9
 #define IPIPE_PATCH_NUMBER    0
 
 #ifdef CONFIG_SMP
@@ -83,9 +83,9 @@ struct ipipe_sysinfo {
                                "%2 = CYCLES2\n"                \
                                "CC = %2 == %0\n"               \
                                "if ! CC jump 1b\n"             \
-                               : "=r" (((unsigned long *)&t)[1]),      \
-                                 "=r" (((unsigned long *)&t)[0]),      \
-                                 "=r" (__cy2)                          \
+                               : "=d,a" (((unsigned long *)&t)[1]),    \
+                                 "=d,a" (((unsigned long *)&t)[0]),    \
+                                 "=d,a" (__cy2)                                \
                                : /*no input*/ : "CC");                 \
        t;                                                              \
        })
@@ -118,35 +118,40 @@ void __ipipe_disable_irqdesc(struct ipipe_domain *ipd,
 
 #define __ipipe_disable_irq(irq)       (irq_desc[irq].chip->mask(irq))
 
-#define __ipipe_lock_root()                                    \
-       set_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)
+static inline int __ipipe_check_tickdev(const char *devname)
+{
+       return 1;
+}
 
-#define __ipipe_unlock_root()                                  \
-       clear_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)
+static inline void __ipipe_lock_root(void)
+{
+       set_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status));
+}
+
+static inline void __ipipe_unlock_root(void)
+{
+       clear_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status));
+}
 
 void __ipipe_enable_pipeline(void);
 
 #define __ipipe_hook_critical_ipi(ipd) do { } while (0)
 
-#define __ipipe_sync_pipeline(syncmask)                                        \
-       do {                                                            \
-               struct ipipe_domain *ipd = ipipe_current_domain;        \
-               if (likely(ipd != ipipe_root_domain || !test_bit(IPIPE_ROOTLOCK_FLAG, &ipd->flags))) \
-                       __ipipe_sync_stage(syncmask);                   \
-       } while (0)
+#define __ipipe_sync_pipeline  ___ipipe_sync_pipeline
+void ___ipipe_sync_pipeline(unsigned long syncmask);
 
 void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs);
 
 int __ipipe_get_irq_priority(unsigned irq);
 
-int __ipipe_get_irqthread_priority(unsigned irq);
-
 void __ipipe_stall_root_raw(void);
 
 void __ipipe_unstall_root_raw(void);
 
 void __ipipe_serial_debug(const char *fmt, ...);
 
+asmlinkage void __ipipe_call_irqtail(unsigned long addr);
+
 DECLARE_PER_CPU(struct pt_regs, __ipipe_tick_regs);
 
 extern unsigned long __ipipe_core_clock;
@@ -162,42 +167,25 @@ static inline unsigned long __ipipe_ffnz(unsigned long ul)
 
 #define __ipipe_run_irqtail()  /* Must be a macro */                   \
        do {                                                            \
-               asmlinkage void __ipipe_call_irqtail(void);             \
                unsigned long __pending;                                \
-               CSYNC();                                        \
+               CSYNC();                                                \
                __pending = bfin_read_IPEND();                          \
                if (__pending & 0x8000) {                               \
                        __pending &= ~0x8010;                           \
                        if (__pending && (__pending & (__pending - 1)) == 0) \
-                               __ipipe_call_irqtail();                 \
+                               __ipipe_call_irqtail(__ipipe_irq_tail_hook); \
                }                                                       \
        } while (0)
 
 #define __ipipe_run_isr(ipd, irq)                                      \
        do {                                                            \
                if (ipd == ipipe_root_domain) {                         \
-                       /*                                              \
-                        * Note: the I-pipe implements a threaded interrupt model on \
-                        * this arch for Linux external IRQs. The interrupt handler we \
-                        * call here only wakes up the associated IRQ thread. \
-                        */                                             \
-                       if (ipipe_virtual_irq_p(irq)) {                 \
-                               /* No irqtail here; virtual interrupts have no effect \
-                                  on IPEND so there is no need for processing \
-                                  deferral. */                         \
-                               local_irq_enable_nohead(ipd);           \
+                       local_irq_enable_hw();                          \
+                       if (ipipe_virtual_irq_p(irq))                   \
                                ipd->irqs[irq].handler(irq, ipd->irqs[irq].cookie); \
-                               local_irq_disable_nohead(ipd);          \
-                       } else                                          \
-                               /*                                      \
-                                * No need to run the irqtail here either; \
-                                * we can't be preempted by hw IRQs, so \
-                                * non-Linux IRQs cannot stack over the short \
-                                * thread wakeup code. Which in turn means \
-                                * that no irqtail condition could be pending \
-                                * for domains above Linux in the pipeline. \
-                                */                                     \
+                       else                                            \
                                ipd->irqs[irq].handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs)); \
+                       local_irq_disable_hw();                         \
                } else {                                                \
                        __clear_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \
                        local_irq_enable_nohead(ipd);                   \
@@ -217,42 +205,24 @@ void ipipe_init_irq_threads(void);
 
 int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc);
 
-#define IS_SYSIRQ(irq)         ((irq) > IRQ_CORETMR && (irq) <= SYS_IRQS)
-#define IS_GPIOIRQ(irq)                ((irq) >= GPIO_IRQ_BASE && (irq) < NR_IRQS)
-
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+#define IRQ_SYSTMR             IRQ_CORETMR
+#define IRQ_PRIOTMR            IRQ_CORETMR
+#else
 #define IRQ_SYSTMR             IRQ_TIMER0
 #define IRQ_PRIOTMR            CONFIG_IRQ_TIMER0
+#endif
 
-#if defined(CONFIG_BF531) || defined(CONFIG_BF532) || defined(CONFIG_BF533)
-#define PRIO_GPIODEMUX(irq)    CONFIG_PFA
-#elif defined(CONFIG_BF534) || defined(CONFIG_BF536) || defined(CONFIG_BF537)
-#define PRIO_GPIODEMUX(irq)    CONFIG_IRQ_PROG_INTA
-#elif defined(CONFIG_BF52x)
-#define PRIO_GPIODEMUX(irq)    ((irq) == IRQ_PORTF_INTA ? CONFIG_IRQ_PORTF_INTA : \
-                                (irq) == IRQ_PORTG_INTA ? CONFIG_IRQ_PORTG_INTA : \
-                                (irq) == IRQ_PORTH_INTA ? CONFIG_IRQ_PORTH_INTA : \
-                                -1)
-#elif defined(CONFIG_BF561)
-#define PRIO_GPIODEMUX(irq)    ((irq) == IRQ_PROG0_INTA ? CONFIG_IRQ_PROG0_INTA : \
-                                (irq) == IRQ_PROG1_INTA ? CONFIG_IRQ_PROG1_INTA : \
-                                (irq) == IRQ_PROG2_INTA ? CONFIG_IRQ_PROG2_INTA : \
-                                -1)
+#ifdef CONFIG_BF561
 #define bfin_write_TIMER_DISABLE(val)  bfin_write_TMRS8_DISABLE(val)
 #define bfin_write_TIMER_ENABLE(val)   bfin_write_TMRS8_ENABLE(val)
 #define bfin_write_TIMER_STATUS(val)   bfin_write_TMRS8_STATUS(val)
 #define bfin_read_TIMER_STATUS()       bfin_read_TMRS8_STATUS()
 #elif defined(CONFIG_BF54x)
-#define PRIO_GPIODEMUX(irq)    ((irq) == IRQ_PINT0 ? CONFIG_IRQ_PINT0 : \
-                                (irq) == IRQ_PINT1 ? CONFIG_IRQ_PINT1 : \
-                                (irq) == IRQ_PINT2 ? CONFIG_IRQ_PINT2 : \
-                                (irq) == IRQ_PINT3 ? CONFIG_IRQ_PINT3 : \
-                                -1)
 #define bfin_write_TIMER_DISABLE(val)  bfin_write_TIMER_DISABLE0(val)
 #define bfin_write_TIMER_ENABLE(val)   bfin_write_TIMER_ENABLE0(val)
 #define bfin_write_TIMER_STATUS(val)   bfin_write_TIMER_STATUS0(val)
 #define bfin_read_TIMER_STATUS(val)    bfin_read_TIMER_STATUS0(val)
-#else
-# error "no PRIO_GPIODEMUX() for this part"
 #endif
 
 #define __ipipe_root_tick_p(regs)      ((regs->ipend & 0x10) != 0)
@@ -275,4 +245,6 @@ int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc);
 
 #endif /* !CONFIG_IPIPE */
 
+#define ipipe_update_tick_evtdev(evtdev)       do { } while (0)
+
 #endif /* !__ASM_BLACKFIN_IPIPE_H */
index cb1025aeabcfc1c6ff89f74bf1ae2fa3cc37ba63..3e8acbd1a3bee6843e348a942e7cc476bfd51918 100644 (file)
@@ -1,5 +1,5 @@
 /*   -*- linux-c -*-
- *   include/asm-blackfin/_baseipipe.h
+ *   include/asm-blackfin/ipipe_base.h
  *
  *   Copyright (C) 2007 Philippe Gerum.
  *
@@ -27,8 +27,9 @@
 #define IPIPE_NR_XIRQS         NR_IRQS
 #define IPIPE_IRQ_ISHIFT       5       /* 2^5 for 32bits arch. */
 
-/* Blackfin-specific, global domain flags */
-#define IPIPE_ROOTLOCK_FLAG    1       /* Lock pipeline for root */
+/* Blackfin-specific, per-cpu pipeline status */
+#define IPIPE_SYNCDEFER_FLAG   15
+#define IPIPE_SYNCDEFER_MASK   (1L << IPIPE_SYNCDEFER_MASK)
 
  /* Blackfin traps -- i.e. exception vector numbers */
 #define IPIPE_NR_FAULTS                52 /* We leave a gap after VEC_ILL_RES. */
 
 #ifndef __ASSEMBLY__
 
-#include <linux/bitops.h>
-
-extern int test_bit(int nr, const void *addr);
-
-
 extern unsigned long __ipipe_root_status; /* Alias to ipipe_root_cpudom_var(status) */
 
 static inline void __ipipe_stall_root(void)
index 3d977909ce7da0a41179af244608d85eb0ab2c1b..7645e85a5f6f70319c2a20158c0f5d39fbe84ce7 100644 (file)
@@ -61,20 +61,38 @@ void __ipipe_restore_root(unsigned long flags);
 #define raw_irqs_disabled_flags(flags) (!irqs_enabled_from_flags_hw(flags))
 #define local_test_iflag_hw(x)         irqs_enabled_from_flags_hw(x)
 
-#define local_save_flags(x)                                            \
-       do {                                                            \
-               (x) = __ipipe_test_root() ? \
+#define local_save_flags(x)                                     \
+       do {                                                     \
+               (x) = __ipipe_test_root() ?                      \
                        __all_masked_irq_flags : bfin_irq_flags; \
+               barrier();                                       \
        } while (0)
 
-#define local_irq_save(x)                              \
-       do {                                            \
-               (x) = __ipipe_test_and_stall_root();    \
+#define local_irq_save(x)                                       \
+       do {                                                     \
+               (x) = __ipipe_test_and_stall_root() ?            \
+                       __all_masked_irq_flags : bfin_irq_flags; \
+               barrier();                                       \
+       } while (0)
+
+static inline void local_irq_restore(unsigned long x)
+{
+       barrier();
+       __ipipe_restore_root(x == __all_masked_irq_flags);
+}
+
+#define local_irq_disable()                    \
+       do {                                    \
+               __ipipe_stall_root();           \
+               barrier();                      \
        } while (0)
 
-#define local_irq_restore(x)   __ipipe_restore_root(x)
-#define local_irq_disable()    __ipipe_stall_root()
-#define local_irq_enable()     __ipipe_unstall_root()
+static inline void local_irq_enable(void)
+{
+       barrier();
+       __ipipe_unstall_root();
+}
+
 #define irqs_disabled()                __ipipe_test_root()
 
 #define local_save_flags_hw(x) \
index e721ce55956c6a96782e3093c76aa88b11914eb6..2920087516f2a08175b54ed3086844434db937c9 100644 (file)
@@ -122,6 +122,7 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_MEMDIE              4
 #define TIF_RESTORE_SIGMASK    5       /* restore signal mask in do_signal() */
 #define TIF_FREEZE              6       /* is freezing for suspend */
+#define TIF_IRQ_SYNC            7       /* sync pipeline stage */
 
 /* as above, but as bit values */
 #define _TIF_SYSCALL_TRACE     (1<<TIF_SYSCALL_TRACE)
@@ -130,6 +131,7 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_POLLING_NRFLAG    (1<<TIF_POLLING_NRFLAG)
 #define _TIF_RESTORE_SIGMASK   (1<<TIF_RESTORE_SIGMASK)
 #define _TIF_FREEZE             (1<<TIF_FREEZE)
+#define _TIF_IRQ_SYNC           (1<<TIF_IRQ_SYNC)
 
 #define _TIF_WORK_MASK         0x0000FFFE      /* work to do on interrupt/exception return */
 
index 4a92a86824b7bd1d6164eae8d8dcb2ca08bbfd80..fd4d4328a0f2aa94fb5ef97afcc01f0018e89edf 100644 (file)
@@ -15,13 +15,15 @@ else
     obj-y += time.o
 endif
 
-CFLAGS_kgdb_test.o := -mlong-calls -O0
-
 obj-$(CONFIG_IPIPE)                  += ipipe.o
 obj-$(CONFIG_IPIPE_TRACE_MCOUNT)     += mcount.o
 obj-$(CONFIG_BFIN_GPTIMERS)          += gptimers.o
 obj-$(CONFIG_CPLB_INFO)              += cplbinfo.o
 obj-$(CONFIG_MODULES)                += module.o
 obj-$(CONFIG_KGDB)                   += kgdb.o
-obj-$(CONFIG_KGDB_TESTCASE)          += kgdb_test.o
+obj-$(CONFIG_KGDB_TESTS)             += kgdb_test.o
 obj-$(CONFIG_EARLY_PRINTK)           += early_printk.o
+
+# the kgdb test puts code into L2 and without linker
+# relaxation, we need to force long calls to/from it
+CFLAGS_kgdb_test.o := -mlong-calls -O0
index 0e28f75957330d92406b08adbc13024b9e5017c8..d6c067782e638987ba406164f6df65adeb0b15db 100644 (file)
@@ -53,9 +53,13 @@ void __init generate_cplb_tables_cpu(unsigned int cpu)
 
        i_d = i_i = 0;
 
+#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
        /* Set up the zero page.  */
        d_tbl[i_d].addr = 0;
        d_tbl[i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
+       i_tbl[i_i].addr = 0;
+       i_tbl[i_i++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
+#endif
 
        /* Cover kernel memory with 4M pages.  */
        addr = 0;
index 339be5a3ae6a64f3f6bcc7bf9f9514a86b167ed8..a5de8d45424cda8b29f21d338e6224c94892cb1b 100644 (file)
 #include <asm/atomic.h>
 #include <asm/io.h>
 
-static int create_irq_threads;
-
 DEFINE_PER_CPU(struct pt_regs, __ipipe_tick_regs);
 
-static DEFINE_PER_CPU(unsigned long, pending_irqthread_mask);
-
-static DEFINE_PER_CPU(int [IVG13 + 1], pending_irq_count);
-
 asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs);
 
 static void __ipipe_no_irqtail(void);
@@ -93,6 +87,7 @@ void __ipipe_enable_pipeline(void)
  */
 void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
 {
+       struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
        struct ipipe_domain *this_domain, *next_domain;
        struct list_head *head, *pos;
        int m_ack, s = -1;
@@ -104,7 +99,6 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
         * interrupt.
         */
        m_ack = (regs == NULL || irq == IRQ_SYSTMR || irq == IRQ_CORETMR);
-
        this_domain = ipipe_current_domain;
 
        if (unlikely(test_bit(IPIPE_STICKY_FLAG, &this_domain->irqs[irq].control)))
@@ -114,49 +108,28 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
                next_domain = list_entry(head, struct ipipe_domain, p_link);
                if (likely(test_bit(IPIPE_WIRED_FLAG, &next_domain->irqs[irq].control))) {
                        if (!m_ack && next_domain->irqs[irq].acknowledge != NULL)
-                               next_domain->irqs[irq].acknowledge(irq, irq_desc + irq);
-                       if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags))
-                               s = __test_and_set_bit(IPIPE_STALL_FLAG,
-                                                      &ipipe_root_cpudom_var(status));
+                               next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq));
+                       if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
+                               s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status);
                        __ipipe_dispatch_wired(next_domain, irq);
-                               goto finalize;
-                       return;
+                       goto out;
                }
        }
 
        /* Ack the interrupt. */
 
        pos = head;
-
        while (pos != &__ipipe_pipeline) {
                next_domain = list_entry(pos, struct ipipe_domain, p_link);
-               /*
-                * For each domain handling the incoming IRQ, mark it
-                * as pending in its log.
-                */
                if (test_bit(IPIPE_HANDLE_FLAG, &next_domain->irqs[irq].control)) {
-                       /*
-                        * Domains that handle this IRQ are polled for
-                        * acknowledging it by decreasing priority
-                        * order. The interrupt must be made pending
-                        * _first_ in the domain's status flags before
-                        * the PIC is unlocked.
-                        */
                        __ipipe_set_irq_pending(next_domain, irq);
-
                        if (!m_ack && next_domain->irqs[irq].acknowledge != NULL) {
-                               next_domain->irqs[irq].acknowledge(irq, irq_desc + irq);
+                               next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq));
                                m_ack = 1;
                        }
                }
-
-               /*
-                * If the domain does not want the IRQ to be passed
-                * down the interrupt pipe, exit the loop now.
-                */
                if (!test_bit(IPIPE_PASS_FLAG, &next_domain->irqs[irq].control))
                        break;
-
                pos = next_domain->p_link.next;
        }
 
@@ -166,18 +139,24 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
         * immediately to the current domain if the interrupt has been
         * marked as 'sticky'. This search does not go beyond the
         * current domain in the pipeline. We also enforce the
-        * additional root stage lock (blackfin-specific). */
+        * additional root stage lock (blackfin-specific).
+        */
+       if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
+               s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status);
 
-       if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags))
-               s = __test_and_set_bit(IPIPE_STALL_FLAG,
-                                      &ipipe_root_cpudom_var(status));
-finalize:
+       /*
+        * If the interrupt preempted the head domain, then do not
+        * even try to walk the pipeline, unless an interrupt is
+        * pending for it.
+        */
+       if (test_bit(IPIPE_AHEAD_FLAG, &this_domain->flags) &&
+           ipipe_head_cpudom_var(irqpend_himask) == 0)
+               goto out;
 
        __ipipe_walk_pipeline(head);
-
+out:
        if (!s)
-               __clear_bit(IPIPE_STALL_FLAG,
-                           &ipipe_root_cpudom_var(status));
+               __clear_bit(IPIPE_STALL_FLAG, &p->status);
 }
 
 int __ipipe_check_root(void)
@@ -187,7 +166,7 @@ int __ipipe_check_root(void)
 
 void __ipipe_enable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
 {
-       struct irq_desc *desc = irq_desc + irq;
+       struct irq_desc *desc = irq_to_desc(irq);
        int prio = desc->ic_prio;
 
        desc->depth = 0;
@@ -199,7 +178,7 @@ EXPORT_SYMBOL(__ipipe_enable_irqdesc);
 
 void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
 {
-       struct irq_desc *desc = irq_desc + irq;
+       struct irq_desc *desc = irq_to_desc(irq);
        int prio = desc->ic_prio;
 
        if (ipd != &ipipe_root &&
@@ -236,15 +215,18 @@ int __ipipe_syscall_root(struct pt_regs *regs)
 {
        unsigned long flags;
 
-       /* We need to run the IRQ tail hook whenever we don't
+       /*
+        * We need to run the IRQ tail hook whenever we don't
         * propagate a syscall to higher domains, because we know that
         * important operations might be pending there (e.g. Xenomai
-        * deferred rescheduling). */
+        * deferred rescheduling).
+        */
 
-       if (!__ipipe_syscall_watched_p(current, regs->orig_p0)) {
+       if (regs->orig_p0 < NR_syscalls) {
                void (*hook)(void) = (void (*)(void))__ipipe_irq_tail_hook;
                hook();
-               return 0;
+               if ((current->flags & PF_EVNOTIFY) == 0)
+                       return 0;
        }
 
        /*
@@ -312,112 +294,46 @@ int ipipe_trigger_irq(unsigned irq)
 {
        unsigned long flags;
 
+#ifdef CONFIG_IPIPE_DEBUG
        if (irq >= IPIPE_NR_IRQS ||
            (ipipe_virtual_irq_p(irq)
             && !test_bit(irq - IPIPE_VIRQ_BASE, &__ipipe_virtual_irq_map)))
                return -EINVAL;
+#endif
 
        local_irq_save_hw(flags);
-
        __ipipe_handle_irq(irq, NULL);
-
        local_irq_restore_hw(flags);
 
        return 1;
 }
 
-/* Move Linux IRQ to threads. */
-
-static int do_irqd(void *__desc)
+asmlinkage void __ipipe_sync_root(void)
 {
-       struct irq_desc *desc = __desc;
-       unsigned irq = desc - irq_desc;
-       int thrprio = desc->thr_prio;
-       int thrmask = 1 << thrprio;
-       int cpu = smp_processor_id();
-       cpumask_t cpumask;
-
-       sigfillset(&current->blocked);
-       current->flags |= PF_NOFREEZE;
-       cpumask = cpumask_of_cpu(cpu);
-       set_cpus_allowed(current, cpumask);
-       ipipe_setscheduler_root(current, SCHED_FIFO, 50 + thrprio);
-
-       while (!kthread_should_stop()) {
-               local_irq_disable();
-               if (!(desc->status & IRQ_SCHEDULED)) {
-                       set_current_state(TASK_INTERRUPTIBLE);
-resched:
-                       local_irq_enable();
-                       schedule();
-                       local_irq_disable();
-               }
-               __set_current_state(TASK_RUNNING);
-               /*
-                * If higher priority interrupt servers are ready to
-                * run, reschedule immediately. We need this for the
-                * GPIO demux IRQ handler to unmask the interrupt line
-                * _last_, after all GPIO IRQs have run.
-                */
-               if (per_cpu(pending_irqthread_mask, cpu) & ~(thrmask|(thrmask-1)))
-                       goto resched;
-               if (--per_cpu(pending_irq_count[thrprio], cpu) == 0)
-                       per_cpu(pending_irqthread_mask, cpu) &= ~thrmask;
-               desc->status &= ~IRQ_SCHEDULED;
-               desc->thr_handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs));
-               local_irq_enable();
-       }
-       __set_current_state(TASK_RUNNING);
-       return 0;
-}
+       unsigned long flags;
 
-static void kick_irqd(unsigned irq, void *cookie)
-{
-       struct irq_desc *desc = irq_desc + irq;
-       int thrprio = desc->thr_prio;
-       int thrmask = 1 << thrprio;
-       int cpu = smp_processor_id();
-
-       if (!(desc->status & IRQ_SCHEDULED)) {
-               desc->status |= IRQ_SCHEDULED;
-               per_cpu(pending_irqthread_mask, cpu) |= thrmask;
-               ++per_cpu(pending_irq_count[thrprio], cpu);
-               wake_up_process(desc->thread);
-       }
-}
+       BUG_ON(irqs_disabled());
 
-int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc)
-{
-       if (desc->thread || !create_irq_threads)
-               return 0;
-
-       desc->thread = kthread_create(do_irqd, desc, "IRQ %d", irq);
-       if (desc->thread == NULL) {
-               printk(KERN_ERR "irqd: could not create IRQ thread %d!\n", irq);
-               return -ENOMEM;
-       }
+       local_irq_save_hw(flags);
 
-       wake_up_process(desc->thread);
+       clear_thread_flag(TIF_IRQ_SYNC);
 
-       desc->thr_handler = ipipe_root_domain->irqs[irq].handler;
-       ipipe_root_domain->irqs[irq].handler = &kick_irqd;
+       if (ipipe_root_cpudom_var(irqpend_himask) != 0)
+               __ipipe_sync_pipeline(IPIPE_IRQMASK_ANY);
 
-       return 0;
+       local_irq_restore_hw(flags);
 }
 
-void __init ipipe_init_irq_threads(void)
+void ___ipipe_sync_pipeline(unsigned long syncmask)
 {
-       unsigned irq;
-       struct irq_desc *desc;
-
-       create_irq_threads = 1;
+       struct ipipe_domain *ipd = ipipe_current_domain;
 
-       for (irq = 0; irq < NR_IRQS; irq++) {
-               desc = irq_desc + irq;
-               if (desc->action != NULL ||
-                       (desc->status & IRQ_NOREQUEST) != 0)
-                       ipipe_start_irq_thread(irq, desc);
+       if (ipd == ipipe_root_domain) {
+               if (test_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)))
+                       return;
        }
+
+       __ipipe_sync_stage(syncmask);
 }
 
 EXPORT_SYMBOL(show_stack);
index 75724eee6494c65c87545e14682f8cfe213877dd..7fd12656484666ee4c29784a1d2d1e0e4e5fee04 100644 (file)
@@ -144,11 +144,15 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
 #endif
        generic_handle_irq(irq);
 
-#ifndef CONFIG_IPIPE   /* Useless and bugous over the I-pipe: IRQs are threaded. */
-       /* If we're the only interrupt running (ignoring IRQ15 which is for
-          syscalls), lower our priority to IRQ14 so that softirqs run at
-          that level.  If there's another, lower-level interrupt, irq_exit
-          will defer softirqs to that.  */
+#ifndef CONFIG_IPIPE
+       /*
+        * If we're the only interrupt running (ignoring IRQ15 which
+        * is for syscalls), lower our priority to IRQ14 so that
+        * softirqs run at that level.  If there's another,
+        * lower-level interrupt, irq_exit will defer softirqs to
+        * that. If the interrupt pipeline is enabled, we are already
+        * running at IRQ14 priority, so we don't need this code.
+        */
        CSYNC();
        pending = bfin_read_IPEND() & ~0x8000;
        other_ints = pending & (pending - 1);
index 3dba9c17304a86006a7a3ad2709ea0cf361c3998..dbcf3e45cb0baefef5136967e33744fef40b64fb 100644 (file)
@@ -20,6 +20,7 @@
 static char cmdline[256];
 static unsigned long len;
 
+#ifndef CONFIG_SMP
 static int num1 __attribute__((l1_data));
 
 void kgdb_l1_test(void) __attribute__((l1_text));
@@ -32,6 +33,8 @@ void kgdb_l1_test(void)
        printk(KERN_ALERT "L1(after change) : data variable addr = 0x%p, data value is %d\n", &num1, num1);
        return ;
 }
+#endif
+
 #if L2_LENGTH
 
 static int num2 __attribute__((l2));
@@ -59,10 +62,12 @@ int kgdb_test(char *name, int len, int count, int z)
 static int test_proc_output(char *buf)
 {
        kgdb_test("hello world!", 12, 0x55, 0x10);
+#ifndef CONFIG_SMP
        kgdb_l1_test();
-       #if L2_LENGTH
+#endif
+#if L2_LENGTH
        kgdb_l2_test();
-       #endif
+#endif
 
        return 0;
 }
index 594e325b40e4fa078ce1c7aee07041a20a0ac4d0..d76618db50df8c4e3f4c06cb44d09906e5b41147 100644 (file)
@@ -45,6 +45,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/dma.h>
 #include <asm/fixed_code.h>
+#include <asm/cacheflush.h>
 #include <asm/mem_map.h>
 
 #define TEXT_OFFSET 0
@@ -240,7 +241,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 
                        } else if (addr >= FIXED_CODE_START
                            && addr + sizeof(tmp) <= FIXED_CODE_END) {
-                               memcpy(&tmp, (const void *)(addr), sizeof(tmp));
+                               copy_from_user_page(0, 0, 0, &tmp, (const void *)(addr), sizeof(tmp));
                                copied = sizeof(tmp);
 
                        } else
@@ -320,7 +321,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 
                        } else if (addr >= FIXED_CODE_START
                            && addr + sizeof(data) <= FIXED_CODE_END) {
-                               memcpy((void *)(addr), &data, sizeof(data));
+                               copy_to_user_page(0, 0, 0, (void *)(addr), &data, sizeof(data));
                                copied = sizeof(data);
 
                        } else
index e5c11623080015fec2cf4a2f671639448f745277..a58687bdee6a6580031d6903526774c3f35e1625 100644 (file)
@@ -889,6 +889,10 @@ void __init setup_arch(char **cmdline_p)
                               CPU, bfin_revid());
        }
 
+       /* We can't run on BF548-0.1 due to ANOMALY 05000448 */
+       if (bfin_cpuid() == 0x27de && bfin_revid() == 1)
+               panic("You can't run on this processor due to 05000448\n");
+
        printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
 
        printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
@@ -1141,12 +1145,12 @@ static int show_cpuinfo(struct seq_file *m, void *v)
                icache_size = 0;
 
        seq_printf(m, "cache size\t: %d KB(L1 icache) "
-               "%d KB(L1 dcache-%s) %d KB(L2 cache)\n",
+               "%d KB(L1 dcache%s) %d KB(L2 cache)\n",
                icache_size, dcache_size,
 #if defined CONFIG_BFIN_WB
-               "wb"
+               "-wb"
 #elif defined CONFIG_BFIN_WT
-               "wt"
+               "-wt"
 #endif
                "", 0);
 
index 172b4c588467ff2a51fbcc5993a4507d39e83d91..1bbacfbd4c5d7c6198496fa939a7920dc36319d4 100644 (file)
@@ -134,7 +134,10 @@ irqreturn_t timer_interrupt(int irq, void *dummy)
 
        write_seqlock(&xtime_lock);
 #if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE)
-/* FIXME: Here TIMIL0 is not set when IPIPE enabled, why? */
+       /*
+        * TIMIL0 is latched in __ipipe_grab_irq() when the I-Pipe is
+        * enabled.
+        */
        if (get_gptimer_status(0) & TIMER_STATUS_TIMIL0) {
 #endif
                do_timer(1);
index 0e175342112e45340d72fbe558234d97840027a2..41f2eacfef207339d53d7dbf1de90b78e7d3a8f2 100644 (file)
@@ -113,7 +113,6 @@ static struct platform_device bfin_mac_device = {
        .name = "bfin_mac",
        .dev.platform_data = &bfin_mii_bus,
 };
-#endif
 
 #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
 static struct dsa_platform_data ksz8893m_switch_data = {
@@ -132,6 +131,7 @@ static struct platform_device ksz8893m_switch_device = {
        .dev.platform_data = &ksz8893m_switch_data,
 };
 #endif
+#endif
 
 #if defined(CONFIG_MTD_M25P80) \
        || defined(CONFIG_MTD_M25P80_MODULE)
@@ -171,6 +171,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 #if defined(CONFIG_NET_DSA_KSZ8893M) \
        || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
 /* SPI SWITCH CHIP */
@@ -179,10 +180,11 @@ static struct bfin5xx_spi_chip spi_switch_info = {
        .bits_per_word = 8,
 };
 #endif
+#endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-       .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+       .enable_dma = 0,
        .bits_per_word = 8,
 };
 #endif
@@ -259,6 +261,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        },
 #endif
 
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 #if defined(CONFIG_NET_DSA_KSZ8893M) \
        || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
        {
@@ -271,24 +274,15 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                .mode = SPI_MODE_3,
        },
 #endif
+#endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
        {
-               .modalias = "spi_mmc_dummy",
+               .modalias = "mmc_spi",
                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
                .bus_num = 0,
-               .chip_select = 0,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
-               .mode = SPI_MODE_3,
-       },
-       {
-               .modalias = "spi_mmc",
-               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
+               .chip_select = 5,
+               .controller_data = &mmc_spi_chip_info,
                .mode = SPI_MODE_3,
        },
 #endif
@@ -630,11 +624,10 @@ static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
        &bfin_mii_bus,
        &bfin_mac_device,
-#endif
-
 #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
        &ksz8893m_switch_device,
 #endif
+#endif
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
        &bfin_spi0_device,
index e5b4bef0edaea0c9966297e608946cd9a87ee959..c847bb101076399cbb3bc510adf5946e42ddecff 100644 (file)
@@ -2,12 +2,12 @@
  * File: include/asm-blackfin/mach-bf518/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
 /* This file shoule be up to date with:
- *  - ????
+ *  - Revision B, 02/03/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -19,6 +19,8 @@
 #define ANOMALY_05000122 (1)
 /* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
+#define ANOMALY_05000254 (1)
 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
 #define ANOMALY_05000265 (1)
 /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
 #define ANOMALY_05000443 (1)
 /* Incorrect L1 Instruction Bank B Memory Map Location */
 #define ANOMALY_05000444 (1)
+/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
+#define ANOMALY_05000452 (1)
+/* PWM_TRIPB Signal Not Available on PG10 */
+#define ANOMALY_05000453 (1)
+/* PPI_FS3 is Driven One Half Cycle Later Than PPI Data */
+#define ANOMALY_05000455 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000125 (0)
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000278 (0)
 #define ANOMALY_05000285 (0)
+#define ANOMALY_05000305 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000312 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (0)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (0)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
index b50a63b975a2cbade4a24069db52d7b564183d24..e21c1c3e4ec7e8129b87989c81e49f9f4001a6a0 100644 (file)
@@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
         CH_UART0_TX,
         CH_UART0_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
         CONFIG_UART0_CTS_PIN,
         CONFIG_UART0_RTS_PIN,
 #endif
@@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
         CH_UART1_TX,
         CH_UART1_RX,
 #endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
         CONFIG_UART1_CTS_PIN,
         CONFIG_UART1_RTS_PIN,
 #endif
index 856c097b5317eda49cc70cf8456f8dfee1bfbc6c..48e69eecdba42b4e690b146b71866f1127c6d6e8 100644 (file)
@@ -487,9 +487,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-       .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+       .enable_dma = 0,
        .bits_per_word = 8,
 };
 #endif
@@ -585,23 +585,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                .controller_data = &ad9960_spi_chip_info,
        },
 #endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
        {
-               .modalias = "spi_mmc_dummy",
-               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = 0,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
-               .mode = SPI_MODE_3,
-       },
-       {
-               .modalias = "spi_mmc",
-               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+               .modalias = "mmc_spi",
+               .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
                .bus_num = 0,
-               .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
+               .chip_select = 5,
+               .controller_data = &mmc_spi_chip_info,
                .mode = SPI_MODE_3,
        },
 #endif
index 83606fcdde2757ea8a6d7361864c27c7d2240b9c..7fe480e4ebe83c1022e275373cc1d77550091c20 100644 (file)
@@ -256,9 +256,9 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-       .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+       .enable_dma = 0,
        .bits_per_word = 8,
 };
 #endif
@@ -366,23 +366,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        },
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
        {
-               .modalias = "spi_mmc_dummy",
+               .modalias = "mmc_spi",
                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
                .bus_num = 0,
-               .chip_select = 0,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
-               .mode = SPI_MODE_3,
-       },
-       {
-               .modalias = "spi_mmc",
-               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
+               .chip_select = 5,
+               .controller_data = &mmc_spi_chip_info,
                .mode = SPI_MODE_3,
        },
 #endif
index 035e8d83505870a246be7f05a0d81611c3a2cc37..df6808d8a6efce3f5317cfc849c9bbb969e7dcda 100644 (file)
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf527/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000278 (0)
 #define ANOMALY_05000285 (0)
+#define ANOMALY_05000305 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000312 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000363 (0)
 #define ANOMALY_05000412 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
index 75722d6008b0cade6651e72911d7bfdb3543cbf6..e8c41fd842b5d818d70e83cc4ce78fda0288f01b 100644 (file)
@@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
         CH_UART0_TX,
         CH_UART0_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
         CONFIG_UART0_CTS_PIN,
         CONFIG_UART0_RTS_PIN,
 #endif
@@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
         CH_UART1_TX,
         CH_UART1_RX,
 #endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
         CONFIG_UART1_CTS_PIN,
         CONFIG_UART1_RTS_PIN,
 #endif
index 308c98dc5aba6a2bf2bdecf0aef4239bbe86a8b0..8d8b3e7321e628fb52d1aecb9c34bc0ee9f00772 100644 (file)
@@ -38,9 +38,4 @@ config BFIN532_IP0X
        help
          Core support for IP04/IP04 open hardware IP-PBX.
 
-config GENERIC_BF533_BOARD
-       bool "Generic"
-       help
-         Generic or Custom board support.
-
 endchoice
index 9afbe72b484f7159a0a1ab5068ee5e54db9baf78..ff1e832f80d2ea912e1317cc96de3c1ccb1d1abe 100644 (file)
@@ -2,7 +2,6 @@
 # arch/blackfin/mach-bf533/boards/Makefile
 #
 
-obj-$(CONFIG_GENERIC_BF533_BOARD)      += generic_board.o
 obj-$(CONFIG_BFIN533_STAMP)            += stamp.o
 obj-$(CONFIG_BFIN532_IP0X)             += ip0x.o
 obj-$(CONFIG_BFIN533_EZKIT)            += ezkit.o
index 015c18f85e7faf2d272c2fc5dffb6cdc89547a44..0765872a8ada70a9114bfc98266ad7798e384ca9 100644 (file)
@@ -101,9 +101,9 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-       .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+       .enable_dma = 0,
        .bits_per_word = 8,
 };
 #endif
@@ -129,23 +129,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        },
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-       {
-               .modalias = "spi_mmc_dummy",
-               .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = 0,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
-               .mode = SPI_MODE_3,
-       },
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
        {
-               .modalias = "spi_mmc",
+               .modalias = "mmc_spi",
                .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
                .bus_num = 0,
-               .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
+               .chip_select = 5,
+               .controller_data = &mmc_spi_chip_info,
                .mode = SPI_MODE_3,
        },
 #endif
index e7061c7e8c42e5c0aa84acd06034dd64e41792f9..e8974878d8c2807dc34bb2baa4b5822959558a5c 100644 (file)
@@ -96,9 +96,9 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-       .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+       .enable_dma = 0,
        .bits_per_word = 8,
 };
 #endif
@@ -138,23 +138,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        },
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-       {
-               .modalias = "spi_mmc_dummy",
-               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = 0,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
-               .mode = SPI_MODE_3,
-       },
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
        {
-               .modalias = "spi_mmc",
+               .modalias = "mmc_spi",
                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
                .bus_num = 0,
-               .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
+               .chip_select = 5,
+               .controller_data = &mmc_spi_chip_info,
                .mode = SPI_MODE_3,
        },
 #endif
diff --git a/arch/blackfin/mach-bf533/boards/generic_board.c b/arch/blackfin/mach-bf533/boards/generic_board.c
deleted file mode 100644 (file)
index 986eeec..0000000
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * File:         arch/blackfin/mach-bf533/generic_board.c
- * Based on:     arch/blackfin/mach-bf533/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
- *
- * Created:      2005
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-const char bfin_board_name[] = "UNKNOWN BOARD";
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-static struct platform_device rtc_device = {
-       .name = "rtc-bfin",
-       .id   = -1,
-};
-#endif
-
-/*
- *  Driver needs to know address, irq and flag pin.
- */
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-static struct resource smc91x_resources[] = {
-       {
-               .start = 0x20300300,
-               .end = 0x20300300 + 16,
-               .flags = IORESOURCE_MEM,
-       }, {
-               .start = IRQ_PROG_INTB,
-               .end = IRQ_PROG_INTB,
-               .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-       }, {
-               .start = IRQ_PF7,
-               .end = IRQ_PF7,
-               .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-       },
-};
-
-static struct platform_device smc91x_device = {
-       .name = "smc91x",
-       .id = 0,
-       .num_resources = ARRAY_SIZE(smc91x_resources),
-       .resource = smc91x_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
-       {
-               .start = 0xFFC00400,
-               .end = 0xFFC004FF,
-               .flags = IORESOURCE_MEM,
-       },
-       {
-               .start = IRQ_UART0_RX,
-               .end = IRQ_UART0_RX+1,
-               .flags = IORESOURCE_IRQ,
-       },
-       {
-               .start = CH_UART0_RX,
-               .end = CH_UART0_RX+1,
-               .flags = IORESOURCE_DMA,
-       },
-};
-
-static struct platform_device bfin_sir0_device = {
-       .name = "bfin_sir",
-       .id = 0,
-       .num_resources = ARRAY_SIZE(bfin_sir0_resources),
-       .resource = bfin_sir0_resources,
-};
-#endif
-#endif
-
-static struct platform_device *generic_board_devices[] __initdata = {
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-       &rtc_device,
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-       &smc91x_device,
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-       &bfin_sir0_device,
-#endif
-#endif
-};
-
-static int __init generic_board_init(void)
-{
-       printk(KERN_INFO "%s(): registering device resources\n", __func__);
-       return platform_add_devices(generic_board_devices, ARRAY_SIZE(generic_board_devices));
-}
-
-arch_initcall(generic_board_init);
index e30b1b7d144265803e37f1d5dab9826a3a72c026..f19b63378b1299ec086b0358bbb3261cc7c9e113 100644 (file)
@@ -127,8 +127,8 @@ static struct platform_device dm9000_device2 = {
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* all SPI peripherals info goes here */
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 /*
  * CPOL (Clock Polarity)
  *  0 - Active high SCK
@@ -152,14 +152,13 @@ static struct bfin5xx_spi_chip spi_mmc_chip_info = {
 /* Notice: for blackfin, the speed_hz is the value of register
  * SPI_BAUD, not the real baudrate */
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
        {
-               .modalias = "spi_mmc",
+               .modalias = "mmc_spi",
                .max_speed_hz = 2,
                .bus_num = 1,
-               .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
+               .chip_select = 5,
+               .controller_data = &mmc_spi_chip_info,
        },
 #endif
 };
index 0d3a03429fb984174f75d03a1c904c920bf22aca..1cf893e2e55baffa27cf4aa8aa2d2757505f76f1 100644 (file)
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf533/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
 #define ANOMALY_05000301 (__SILICON_REVISION__ < 6)
 /* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
 #define ANOMALY_05000302 (__SILICON_REVISION__ < 5)
-/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
 #define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
 /* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */
 #define ANOMALY_05000306 (__SILICON_REVISION__ < 5)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
index f3d9e495230c04439357b1499874c918092a817e..5f517f53b0fd8d17fb8f9ab104269ffa51290f09 100644 (file)
@@ -134,7 +134,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
        CH_UART_TX,
        CH_UART_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
        CONFIG_UART0_CTS_PIN,
        CONFIG_UART0_RTS_PIN,
 #endif
index 42a57b0acb292d4046b674afffe720f2d6f94cda..77c59da87e85d93f2d62478fff1f6a9cef4c19df 100644 (file)
@@ -33,9 +33,4 @@ config CAMSIG_MINOTAUR
        help
          Board supply package for CSP Minotaur
 
-config GENERIC_BF537_BOARD
-       bool "Generic"
-       help
-         Generic or Custom board support.
-
 endchoice
index 7168cc14afd82a7011821649fdd48283d24266b2..68b98a7af6a618dc642b9413ec0b7c613798bf84 100644 (file)
@@ -2,7 +2,6 @@
 # arch/blackfin/mach-bf537/boards/Makefile
 #
 
-obj-$(CONFIG_GENERIC_BF537_BOARD)      += generic_board.o
 obj-$(CONFIG_BFIN537_STAMP)            += stamp.o
 obj-$(CONFIG_BFIN537_BLUETECHNIX_CM)   += cm_bf537.o
 obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM)  += tcm_bf537.o
index 9cd8fb2a30d32ba3d81ef2409e9078df884b55f0..41c75b9bfac03dde78f1269738fd750193efe4a2 100644 (file)
@@ -108,9 +108,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-       .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+       .enable_dma = 0,
        .bits_per_word = 8,
 };
 #endif
@@ -160,23 +160,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        },
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-       {
-               .modalias = "spi_mmc_dummy",
-               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = 7,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
-               .mode = SPI_MODE_3,
-       },
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
        {
-               .modalias = "spi_mmc",
-               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+               .modalias = "mmc_spi",
+               .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
                .bus_num = 0,
-               .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
+               .chip_select = 1,
+               .controller_data = &mmc_spi_chip_info,
                .mode = SPI_MODE_3,
        },
 #endif
diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c
deleted file mode 100644 (file)
index da710fd..0000000
+++ /dev/null
@@ -1,745 +0,0 @@
-/*
- * File:         arch/blackfin/mach-bf537/boards/generic_board.c
- * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
- *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/device.h>
-#include <linux/etherdevice.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-#include <linux/usb/isp1362.h>
-#endif
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/usb/sl811.h>
-#include <asm/dma.h>
-#include <asm/bfin5xx_spi.h>
-#include <asm/reboot.h>
-#include <asm/portmux.h>
-#include <linux/spi/ad7877.h>
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-const char bfin_board_name[] = "UNKNOWN BOARD";
-
-/*
- *  Driver needs to know address, irq and flag pin.
- */
-
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
-#include <linux/usb/isp1760.h>
-static struct resource bfin_isp1760_resources[] = {
-       [0] = {
-               .start  = 0x203C0000,
-               .end    = 0x203C0000 + 0x000fffff,
-               .flags  = IORESOURCE_MEM,
-       },
-       [1] = {
-               .start  = IRQ_PF7,
-               .end    = IRQ_PF7,
-               .flags  = IORESOURCE_IRQ,
-       },
-};
-
-static struct isp1760_platform_data isp1760_priv = {
-       .is_isp1761 = 0,
-       .port1_disable = 0,
-       .bus_width_16 = 1,
-       .port1_otg = 0,
-       .analog_oc = 0,
-       .dack_polarity_high = 0,
-       .dreq_polarity_high = 0,
-};
-
-static struct platform_device bfin_isp1760_device = {
-       .name           = "isp1760-hcd",
-       .id             = 0,
-       .dev = {
-               .platform_data = &isp1760_priv,
-       },
-       .num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
-       .resource       = bfin_isp1760_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
-static struct resource bfin_pcmcia_cf_resources[] = {
-       {
-               .start = 0x20310000, /* IO PORT */
-               .end = 0x20312000,
-               .flags = IORESOURCE_MEM,
-       }, {
-               .start = 0x20311000, /* Attribute Memory */
-               .end = 0x20311FFF,
-               .flags = IORESOURCE_MEM,
-       }, {
-               .start = IRQ_PF4,
-               .end = IRQ_PF4,
-               .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-       }, {
-               .start = 6, /* Card Detect PF6 */
-               .end = 6,
-               .flags = IORESOURCE_IRQ,
-       },
-};
-
-static struct platform_device bfin_pcmcia_cf_device = {
-       .name = "bfin_cf_pcmcia",
-       .id = -1,
-       .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
-       .resource = bfin_pcmcia_cf_resources,
-};
-#endif
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-static struct platform_device rtc_device = {
-       .name = "rtc-bfin",
-       .id   = -1,
-};
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-static struct resource smc91x_resources[] = {
-       {
-               .name = "smc91x-regs",
-               .start = 0x20300300,
-               .end = 0x20300300 + 16,
-               .flags = IORESOURCE_MEM,
-       }, {
-
-               .start = IRQ_PF7,
-               .end = IRQ_PF7,
-               .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-       },
-};
-static struct platform_device smc91x_device = {
-       .name = "smc91x",
-       .id = 0,
-       .num_resources = ARRAY_SIZE(smc91x_resources),
-       .resource = smc91x_resources,
-};
-#endif
-
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-static struct resource dm9000_resources[] = {
-       [0] = {
-               .start  = 0x203FB800,
-               .end    = 0x203FB800 + 1,
-               .flags  = IORESOURCE_MEM,
-       },
-       [1] = {
-               .start  = 0x203FB800 + 4,
-               .end    = 0x203FB800 + 5,
-               .flags  = IORESOURCE_MEM,
-       },
-       [2] = {
-               .start  = IRQ_PF9,
-               .end    = IRQ_PF9,
-               .flags  = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
-       },
-};
-
-static struct platform_device dm9000_device = {
-       .name           = "dm9000",
-       .id             = -1,
-       .num_resources  = ARRAY_SIZE(dm9000_resources),
-       .resource       = dm9000_resources,
-};
-#endif
-
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-static struct resource sl811_hcd_resources[] = {
-       {
-               .start = 0x20340000,
-               .end = 0x20340000,
-               .flags = IORESOURCE_MEM,
-       }, {
-               .start = 0x20340004,
-               .end = 0x20340004,
-               .flags = IORESOURCE_MEM,
-       }, {
-               .start = CONFIG_USB_SL811_BFIN_IRQ,
-               .end = CONFIG_USB_SL811_BFIN_IRQ,
-               .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-       },
-};
-
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-void sl811_port_power(struct device *dev, int is_on)
-{
-       gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
-       gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
-
-}
-#endif
-
-static struct sl811_platform_data sl811_priv = {
-       .potpg = 10,
-       .power = 250,       /* == 500mA */
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-       .port_power = &sl811_port_power,
-#endif
-};
-
-static struct platform_device sl811_hcd_device = {
-       .name = "sl811-hcd",
-       .id = 0,
-       .dev = {
-               .platform_data = &sl811_priv,
-       },
-       .num_resources = ARRAY_SIZE(sl811_hcd_resources),
-       .resource = sl811_hcd_resources,
-};
-#endif
-
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-static struct resource isp1362_hcd_resources[] = {
-       {
-               .start = 0x20360000,
-               .end = 0x20360000,
-               .flags = IORESOURCE_MEM,
-       }, {
-               .start = 0x20360004,
-               .end = 0x20360004,
-               .flags = IORESOURCE_MEM,
-       }, {
-               .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
-               .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
-               .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-       },
-};
-
-static struct isp1362_platform_data isp1362_priv = {
-       .sel15Kres = 1,
-       .clknotstop = 0,
-       .oc_enable = 0,
-       .int_act_high = 0,
-       .int_edge_triggered = 0,
-       .remote_wakeup_connected = 0,
-       .no_power_switching = 1,
-       .power_switching_mode = 0,
-};
-
-static struct platform_device isp1362_hcd_device = {
-       .name = "isp1362-hcd",
-       .id = 0,
-       .dev = {
-               .platform_data = &isp1362_priv,
-       },
-       .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
-       .resource = isp1362_hcd_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
-static struct platform_device bfin_mii_bus = {
-       .name = "bfin_mii_bus",
-};
-
-static struct platform_device bfin_mac_device = {
-       .name = "bfin_mac",
-       .dev.platform_data = &bfin_mii_bus,
-};
-#endif
-
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
-static struct resource net2272_bfin_resources[] = {
-       {
-               .start = 0x20300000,
-               .end = 0x20300000 + 0x100,
-               .flags = IORESOURCE_MEM,
-       }, {
-               .start = IRQ_PF7,
-               .end = IRQ_PF7,
-               .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-       },
-};
-
-static struct platform_device net2272_bfin_device = {
-       .name = "net2272",
-       .id = -1,
-       .num_resources = ARRAY_SIZE(net2272_bfin_resources),
-       .resource = net2272_bfin_resources,
-};
-#endif
-
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
-#if defined(CONFIG_MTD_M25P80) \
-       || defined(CONFIG_MTD_M25P80_MODULE)
-static struct mtd_partition bfin_spi_flash_partitions[] = {
-       {
-               .name = "bootloader(spi)",
-               .size = 0x00020000,
-               .offset = 0,
-               .mask_flags = MTD_CAP_ROM
-       }, {
-               .name = "linux kernel(spi)",
-               .size = 0xe0000,
-               .offset = 0x20000
-       }, {
-               .name = "file system(spi)",
-               .size = 0x700000,
-               .offset = 0x00100000,
-       }
-};
-
-static struct flash_platform_data bfin_spi_flash_data = {
-       .name = "m25p80",
-       .parts = bfin_spi_flash_partitions,
-       .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
-       .type = "m25p64",
-};
-
-/* SPI flash chip (m25p64) */
-static struct bfin5xx_spi_chip spi_flash_chip_info = {
-       .enable_dma = 0,         /* use dma transfer with this chip*/
-       .bits_per_word = 8,
-};
-#endif
-
-#if defined(CONFIG_SPI_ADC_BF533) \
-       || defined(CONFIG_SPI_ADC_BF533_MODULE)
-/* SPI ADC chip */
-static struct bfin5xx_spi_chip spi_adc_chip_info = {
-       .enable_dma = 1,         /* use dma transfer with this chip*/
-       .bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-       || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
-static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
-       .enable_dma = 0,
-       .bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
-       .enable_dma = 0,
-       .bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-       .enable_dma = 1,
-       .bits_per_word = 8,
-};
-#endif
-
-#if defined(CONFIG_PBX)
-static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
-       .ctl_reg        = 0x4, /* send zero */
-       .enable_dma     = 0,
-       .bits_per_word  = 8,
-       .cs_change_per_word = 1,
-};
-#endif
-
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
-static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
-       .enable_dma = 0,
-       .bits_per_word = 16,
-};
-
-static const struct ad7877_platform_data bfin_ad7877_ts_info = {
-       .model                  = 7877,
-       .vref_delay_usecs       = 50,   /* internal, no capacitor */
-       .x_plate_ohms           = 419,
-       .y_plate_ohms           = 486,
-       .pressure_max           = 1000,
-       .pressure_min           = 0,
-       .stopacq_polarity       = 1,
-       .first_conversion_delay = 3,
-       .acquisition_time       = 1,
-       .averaging              = 1,
-       .pen_down_acc_interval  = 1,
-};
-#endif
-
-static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
-       || defined(CONFIG_MTD_M25P80_MODULE)
-       {
-               /* the modalias must be the same as spi device driver name */
-               .modalias = "m25p80", /* Name of spi_driver for this device */
-               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0, /* Framework bus number */
-               .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
-               .platform_data = &bfin_spi_flash_data,
-               .controller_data = &spi_flash_chip_info,
-               .mode = SPI_MODE_3,
-       },
-#endif
-
-#if defined(CONFIG_SPI_ADC_BF533) \
-       || defined(CONFIG_SPI_ADC_BF533_MODULE)
-       {
-               .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
-               .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0, /* Framework bus number */
-               .chip_select = 1, /* Framework chip select. */
-               .platform_data = NULL, /* No spi_driver specific config */
-               .controller_data = &spi_adc_chip_info,
-       },
-#endif
-
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-       || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
-       {
-               .modalias = "ad1836-spi",
-               .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
-               .controller_data = &ad1836_spi_chip_info,
-       },
-#endif
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-       {
-               .modalias = "ad9960-spi",
-               .max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = 1,
-               .controller_data = &ad9960_spi_chip_info,
-       },
-#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-       {
-               .modalias = "spi_mmc_dummy",
-               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = 0,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
-               .mode = SPI_MODE_3,
-       },
-       {
-               .modalias = "spi_mmc",
-               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
-               .mode = SPI_MODE_3,
-       },
-#endif
-#if defined(CONFIG_PBX)
-       {
-               .modalias = "fxs-spi",
-               .max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = 8 - CONFIG_J11_JUMPER,
-               .controller_data = &spi_si3xxx_chip_info,
-               .mode = SPI_MODE_3,
-       },
-       {
-               .modalias = "fxo-spi",
-               .max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = 8 - CONFIG_J19_JUMPER,
-               .controller_data = &spi_si3xxx_chip_info,
-               .mode = SPI_MODE_3,
-       },
-#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
-       {
-               .modalias               = "ad7877",
-               .platform_data          = &bfin_ad7877_ts_info,
-               .irq                    = IRQ_PF6,
-               .max_speed_hz   = 12500000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num        = 0,
-               .chip_select  = 1,
-               .controller_data = &spi_ad7877_chip_info,
-       },
-#endif
-};
-
-/* SPI controller data */
-static struct bfin5xx_spi_master bfin_spi0_info = {
-       .num_chipselect = 8,
-       .enable_dma = 1,  /* master has the ability to do dma transfer */
-       .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
-};
-
-/* SPI (0) */
-static struct resource bfin_spi0_resource[] = {
-       [0] = {
-               .start = SPI0_REGBASE,
-               .end   = SPI0_REGBASE + 0xFF,
-               .flags = IORESOURCE_MEM,
-               },
-       [1] = {
-               .start = CH_SPI,
-               .end   = CH_SPI,
-               .flags = IORESOURCE_IRQ,
-       },
-};
-
-static struct platform_device bfin_spi0_device = {
-       .name = "bfin-spi",
-       .id = 0, /* Bus number */
-       .num_resources = ARRAY_SIZE(bfin_spi0_resource),
-       .resource = bfin_spi0_resource,
-       .dev = {
-               .platform_data = &bfin_spi0_info, /* Passed to driver */
-       },
-};
-#endif  /* spi master and devices */
-
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
-static struct platform_device bfin_fb_device = {
-       .name = "bf537-lq035",
-};
-#endif
-
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-static struct platform_device bfin_fb_adv7393_device = {
-       .name = "bfin-adv7393",
-};
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
-       {
-               .start = 0xFFC00400,
-               .end = 0xFFC004FF,
-               .flags = IORESOURCE_MEM,
-       }, {
-               .start = 0xFFC02000,
-               .end = 0xFFC020FF,
-               .flags = IORESOURCE_MEM,
-       },
-};
-
-static struct platform_device bfin_uart_device = {
-       .name = "bfin-uart",
-       .id = 1,
-       .num_resources = ARRAY_SIZE(bfin_uart_resources),
-       .resource = bfin_uart_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
-       {
-               .start = 0xFFC00400,
-               .end = 0xFFC004FF,
-               .flags = IORESOURCE_MEM,
-       },
-       {
-               .start = IRQ_UART0_RX,
-               .end = IRQ_UART0_RX+1,
-               .flags = IORESOURCE_IRQ,
-       },
-       {
-               .start = CH_UART0_RX,
-               .end = CH_UART0_RX+1,
-               .flags = IORESOURCE_DMA,
-       },
-};
-
-static struct platform_device bfin_sir0_device = {
-       .name = "bfin_sir",
-       .id = 0,
-       .num_resources = ARRAY_SIZE(bfin_sir0_resources),
-       .resource = bfin_sir0_resources,
-};
-#endif
-#ifdef CONFIG_BFIN_SIR1
-static struct resource bfin_sir1_resources[] = {
-       {
-               .start = 0xFFC02000,
-               .end = 0xFFC020FF,
-               .flags = IORESOURCE_MEM,
-       },
-       {
-               .start = IRQ_UART1_RX,
-               .end = IRQ_UART1_RX+1,
-               .flags = IORESOURCE_IRQ,
-       },
-       {
-               .start = CH_UART1_RX,
-               .end = CH_UART1_RX+1,
-               .flags = IORESOURCE_DMA,
-       },
-};
-
-static struct platform_device bfin_sir1_device = {
-       .name = "bfin_sir",
-       .id = 1,
-       .num_resources = ARRAY_SIZE(bfin_sir1_resources),
-       .resource = bfin_sir1_resources,
-};
-#endif
-#endif
-
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
-static struct resource bfin_twi0_resource[] = {
-       [0] = {
-               .start = TWI0_REGBASE,
-               .end   = TWI0_REGBASE + 0xFF,
-               .flags = IORESOURCE_MEM,
-       },
-       [1] = {
-               .start = IRQ_TWI,
-               .end   = IRQ_TWI,
-               .flags = IORESOURCE_IRQ,
-       },
-};
-
-static struct platform_device i2c_bfin_twi_device = {
-       .name = "i2c-bfin-twi",
-       .id = 0,
-       .num_resources = ARRAY_SIZE(bfin_twi0_resource),
-       .resource = bfin_twi0_resource,
-};
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
-static struct platform_device bfin_sport0_uart_device = {
-       .name = "bfin-sport-uart",
-       .id = 0,
-};
-
-static struct platform_device bfin_sport1_uart_device = {
-       .name = "bfin-sport-uart",
-       .id = 1,
-};
-#endif
-
-static struct platform_device *stamp_devices[] __initdata = {
-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
-       &bfin_pcmcia_cf_device,
-#endif
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-       &rtc_device,
-#endif
-
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-       &sl811_hcd_device,
-#endif
-
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-       &isp1362_hcd_device,
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-       &smc91x_device,
-#endif
-
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-       &dm9000_device,
-#endif
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
-       &bfin_mii_bus,
-       &bfin_mac_device,
-#endif
-
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
-       &net2272_bfin_device,
-#endif
-
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
-       &bfin_isp1760_device,
-#endif
-
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-       &bfin_spi0_device,
-#endif
-
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
-       &bfin_fb_device,
-#endif
-
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-       &bfin_fb_adv7393_device,
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-       &bfin_uart_device,
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-       &bfin_sir0_device,
-#endif
-#ifdef CONFIG_BFIN_SIR1
-       &bfin_sir1_device,
-#endif
-#endif
-
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
-       &i2c_bfin_twi_device,
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
-       &bfin_sport0_uart_device,
-       &bfin_sport1_uart_device,
-#endif
-};
-
-static int __init generic_init(void)
-{
-       printk(KERN_INFO "%s(): registering device resources\n", __func__);
-       platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-       spi_register_board_info(bfin_spi_board_info,
-                               ARRAY_SIZE(bfin_spi_board_info));
-#endif
-
-       return 0;
-}
-
-arch_initcall(generic_init);
-
-void native_machine_restart(char *cmd)
-{
-       /* workaround reboot hang when booting from SPI */
-       if ((bfin_read_SYSCR() & 0x7) == 0x3)
-               bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
-}
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
-void bfin_get_ether_addr(char *addr)
-{
-       random_ether_addr(addr);
-       printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
-}
-EXPORT_SYMBOL(bfin_get_ether_addr);
-#endif
index db7d3a385e4bda4ade36365ca439080a3c4787aa..3c159819e5550ee178d93cf33a2a4efbbeacd6c2 100644 (file)
@@ -134,9 +134,9 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-       .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+       .enable_dma = 0,
        .bits_per_word = 8,
 };
 #endif
@@ -156,23 +156,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        },
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
        {
-               .modalias = "spi_mmc_dummy",
+               .modalias = "mmc_spi",
                .max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
                .bus_num = 0,
-               .chip_select = 0,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
-               .mode = SPI_MODE_3,
-       },
-       {
-               .modalias = "spi_mmc",
-               .max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
+               .chip_select = 5,
+               .controller_data = &mmc_spi_chip_info,
                .mode = SPI_MODE_3,
        },
 #endif
index 590eb3a139b7a7542a070aa4b885a561997c188a..4e1de1e53f89f396a38ff5faf71fa04300434381 100644 (file)
@@ -289,9 +289,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-       .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+       .enable_dma = 0,
        .bits_per_word = 8,
 };
 #endif
@@ -364,23 +364,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                .controller_data = &ad9960_spi_chip_info,
        },
 #endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-       {
-               .modalias = "spi_mmc_dummy",
-               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = 7,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
-               .mode = SPI_MODE_3,
-       },
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
        {
-               .modalias = "spi_mmc",
+               .modalias = "mmc_spi",
                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
                .bus_num = 0,
-               .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
+               .chip_select = 5,
+               .controller_data = &mmc_spi_chip_info,
                .mode = SPI_MODE_3,
        },
 #endif
index 3f4f203a06ec9b0c0ffb570d7e00b8e1b611db60..53ad10f3cd76fb5a7fe945f032e80a172dc0f7fd 100644 (file)
@@ -108,9 +108,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-       .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+       .enable_dma = 0,
        .bits_per_word = 8,
 };
 #endif
@@ -160,23 +160,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        },
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-       {
-               .modalias = "spi_mmc_dummy",
-               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = 7,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
-               .mode = SPI_MODE_3,
-       },
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
        {
-               .modalias = "spi_mmc",
+               .modalias = "mmc_spi",
                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
                .bus_num = 0,
-               .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
+               .chip_select = 5,
+               .controller_data = &mmc_spi_chip_info,
                .mode = SPI_MODE_3,
        },
 #endif
index 9cb39121d1cba7a359e8a14a053f8435a8d04a42..1bfd80c26c90c35fe0921585a177d4e215eb3bdd 100644 (file)
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf537/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
 #define ANOMALY_05000301 (1)
 /* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
 #define ANOMALY_05000304 (__SILICON_REVISION__ < 3)
-/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
 #define ANOMALY_05000305 (__SILICON_REVISION__ < 3)
 /* SCKELOW Bit Does Not Maintain State Through Hibernate */
 #define ANOMALY_05000307 (__SILICON_REVISION__ < 3)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
index b3f87e1d16a2f5ffa18156b35e76edc01c451870..9e34700844a294278921a36fe7ca411fd9c3a61f 100644 (file)
@@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
        CH_UART0_TX,
        CH_UART0_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
        CONFIG_UART0_CTS_PIN,
        CONFIG_UART0_RTS_PIN,
 #endif
@@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
        CH_UART1_TX,
        CH_UART1_RX,
 #endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
        CONFIG_UART1_CTS_PIN,
        CONFIG_UART1_RTS_PIN,
 #endif
index e130b4f8a05dd9b1d044ce08088f47bea4a71f28..3a5699827363b9e68c547c2c7628a5852660ab48 100644 (file)
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf538/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000230 (0)
 #define ANOMALY_05000263 (0)
+#define ANOMALY_05000305 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
index 40503b6b89a392152e436e3d28d6747bd7272545..3c2811ebecddd520fec44339c7bba04460ae52ca 100644 (file)
@@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
        CH_UART0_TX,
        CH_UART0_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
        CONFIG_UART0_CTS_PIN,
        CONFIG_UART0_RTS_PIN,
 #endif
@@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
        CH_UART1_TX,
        CH_UART1_RX,
 #endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
        CONFIG_UART1_CTS_PIN,
        CONFIG_UART1_RTS_PIN,
 #endif
index 23d03c52f4b46df8d8a7e5aa7c638a8d5e0d7889..882e40ccf0d16f752563bdffffc46f98f2ed6f99 100644 (file)
@@ -2,12 +2,12 @@
  * File: include/asm-blackfin/mach-bf548/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
 /* This file shoule be up to date with:
- *  - Revision G, 08/07/2008; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
+ *  - Revision H, 01/16/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -91,8 +91,6 @@
 #define ANOMALY_05000371 (__SILICON_REVISION__ < 2)
 /* USB DP/DM Data Pins May Lose State When Entering Hibernate */
 #define ANOMALY_05000372 (__SILICON_REVISION__ < 1)
-/* Mobile DDR Operation Not Functional */
-#define ANOMALY_05000377 (1)
 /* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */
 #define ANOMALY_05000378 (__SILICON_REVISION__ < 2)
 /* 16-Bit NAND FLASH Boot Mode Is Not Functional */
 #define ANOMALY_05000429 (__SILICON_REVISION__ < 2)
 /* Software System Reset Corrupts PLL_LOCKCNT Register */
 #define ANOMALY_05000430 (__SILICON_REVISION__ >= 2)
+/* Incorrect Use of Stack in Lockbox Firmware During Authentication */
+#define ANOMALY_05000431 (__SILICON_REVISION__ < 3)
+/* OTP Write Accesses Not Supported */
+#define ANOMALY_05000442 (__SILICON_REVISION__ < 1)
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
 #define ANOMALY_05000443 (1)
+/* CDMAPRIO and L2DMAPRIO Bits in the SYSCR Register Are Not Functional */
+#define ANOMALY_05000446 (1)
+/* UART IrDA Receiver Fails on Extended Bit Pulses */
+#define ANOMALY_05000447 (1)
+/* DDR Clock Duty Cycle Spec Violation (tCH, tCL) */
+#define ANOMALY_05000448 (__SILICON_REVISION__ == 1)
+/* Reduced Timing Margins on DDR Output Setup and Hold (tDS and tDH) */
+#define ANOMALY_05000449 (__SILICON_REVISION__ == 1)
+/* USB DMA Mode 1 Short Packet Data Corruption */
+#define ANOMALY_05000450 (1
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000125 (0)
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000278 (0)
+#define ANOMALY_05000305 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
index e4cf35e7ab9fd6c8a4adf80d10090e821a266ba3..c05e79cba257b0870629ed815bca9efe752bc809 100644 (file)
@@ -63,7 +63,7 @@
 #define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v)
 #define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF)
 
-#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
+#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART2_CTSRTS)
 # define CONFIG_SERIAL_BFIN_CTSRTS
 
 # ifndef CONFIG_UART0_CTS_PIN
 #  define CONFIG_UART0_RTS_PIN -1
 # endif
 
-# ifndef CONFIG_UART1_CTS_PIN
-#  define CONFIG_UART1_CTS_PIN -1
+# ifndef CONFIG_UART2_CTS_PIN
+#  define CONFIG_UART2_CTS_PIN -1
 # endif
 
-# ifndef CONFIG_UART1_RTS_PIN
-#  define CONFIG_UART1_RTS_PIN -1
+# ifndef CONFIG_UART2_RTS_PIN
+#  define CONFIG_UART2_RTS_PIN -1
 # endif
 #endif
 
@@ -130,7 +130,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
        CH_UART0_TX,
        CH_UART0_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
        CONFIG_UART0_CTS_PIN,
        CONFIG_UART0_RTS_PIN,
 #endif
@@ -143,6 +143,10 @@ struct bfin_serial_res bfin_serial_resource[] = {
 #ifdef CONFIG_SERIAL_BFIN_DMA
        CH_UART1_TX,
        CH_UART1_RX,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+       0,
+       0,
 #endif
        },
 #endif
@@ -154,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
        CH_UART2_TX,
        CH_UART2_RX,
 #endif
-#ifdef CONFIG_BFIN_UART2_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
        CONFIG_UART2_CTS_PIN,
        CONFIG_UART2_RTS_PIN,
 #endif
@@ -167,6 +171,10 @@ struct bfin_serial_res bfin_serial_resource[] = {
 #ifdef CONFIG_SERIAL_BFIN_DMA
        CH_UART3_TX,
        CH_UART3_RX,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+       0,
+       0,
 #endif
        },
 #endif
index 60299a71e0905fe3b97566afce8efef8265e1ab5..f194625f68216375bdf720f743826d31e28d7581 100644 (file)
@@ -123,8 +123,8 @@ Events         (highest priority)  EMU         0
 #define IRQ_MXVR_ERROR         BFIN_IRQ(51)    /* MXVR Status (Error) Interrupt */
 #define IRQ_MXVR_MSG           BFIN_IRQ(52)    /* MXVR Message Interrupt */
 #define IRQ_MXVR_PKT           BFIN_IRQ(53)    /* MXVR Packet Interrupt */
-#define IRQ_EPP1_ERROR         BFIN_IRQ(54)    /* EPPI1 Error Interrupt */
-#define IRQ_EPP2_ERROR         BFIN_IRQ(55)    /* EPPI2 Error Interrupt */
+#define IRQ_EPPI1_ERROR                BFIN_IRQ(54)    /* EPPI1 Error Interrupt */
+#define IRQ_EPPI2_ERROR                BFIN_IRQ(55)    /* EPPI2 Error Interrupt */
 #define IRQ_UART3_ERROR                BFIN_IRQ(56)    /* UART3 Status (Error) Interrupt */
 #define IRQ_HOST_ERROR         BFIN_IRQ(57)    /* HOST Status (Error) Interrupt */
 #define IRQ_PIXC_ERROR         BFIN_IRQ(59)    /* PIXC Status (Error) Interrupt */
@@ -361,8 +361,8 @@ Events         (highest priority)  EMU         0
 #define IRQ_UART2_ERR          IRQ_UART2_ERROR
 #define IRQ_CAN0_ERR           IRQ_CAN0_ERROR
 #define IRQ_MXVR_ERR           IRQ_MXVR_ERROR
-#define IRQ_EPP1_ERR           IRQ_EPP1_ERROR
-#define IRQ_EPP2_ERR           IRQ_EPP2_ERROR
+#define IRQ_EPPI1_ERR                  IRQ_EPPI1_ERROR
+#define IRQ_EPPI2_ERR                  IRQ_EPPI2_ERROR
 #define IRQ_UART3_ERR          IRQ_UART3_ERROR
 #define IRQ_HOST_ERR           IRQ_HOST_ERROR
 #define IRQ_PIXC_ERR           IRQ_PIXC_ERROR
index e41a67b1fb53e53933a0d41aa5f86cb309bf9b72..e4bc6d7c5a6a1e83ba33a287cc7feb6aabcc7d7a 100644 (file)
@@ -19,9 +19,4 @@ config BFIN561_BLUETECHNIX_CM
        help
          CM-BF561 support for EVAL- and DEV-Board.
 
-config GENERIC_BF561_BOARD
-       bool "Generic"
-       help
-         Generic or Custom board support.
-
 endchoice
index 04add010b568459da6d324afd87bf4ae46d40b55..3a152559e957d1ab98cac121399256be9a72bc4a 100644 (file)
@@ -2,7 +2,6 @@
 # arch/blackfin/mach-bf561/boards/Makefile
 #
 
-obj-$(CONFIG_GENERIC_BF561_BOARD)      += generic_board.o
 obj-$(CONFIG_BFIN561_BLUETECHNIX_CM)   += cm_bf561.o
 obj-$(CONFIG_BFIN561_EZKIT)            += ezkit.o
 obj-$(CONFIG_BFIN561_TEPLA)            += tepla.o
index 6880d1ebfe60f087b1ec19297b8d0d164f851bc5..f623c6b0719fbc2711f1942e19e4a7143f359c4a 100644 (file)
@@ -105,9 +105,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-       .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+       .enable_dma = 0,
        .bits_per_word = 8,
 };
 #endif
@@ -155,14 +155,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                .controller_data = &ad9960_spi_chip_info,
        },
 #endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
        {
-               .modalias = "spi_mmc",
+               .modalias = "mmc_spi",
                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
                .bus_num = 0,
-               .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
+               .chip_select = 5,
+               .controller_data = &mmc_spi_chip_info,
                .mode = SPI_MODE_3,
        },
 #endif
diff --git a/arch/blackfin/mach-bf561/boards/generic_board.c b/arch/blackfin/mach-bf561/boards/generic_board.c
deleted file mode 100644 (file)
index 0ba366a..0000000
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * File:         arch/blackfin/mach-bf561/generic_board.c
- * Based on:     arch/blackfin/mach-bf533/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
- *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-
-const char bfin_board_name[] = "UNKNOWN BOARD";
-
-/*
- *  Driver needs to know address, irq and flag pin.
- */
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-static struct resource smc91x_resources[] = {
-       {
-               .start = 0x2C010300,
-               .end = 0x2C010300 + 16,
-               .flags = IORESOURCE_MEM,
-       }, {
-               .start = IRQ_PROG_INTB,
-               .end = IRQ_PROG_INTB,
-               .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-       }, {
-               .start = IRQ_PF9,
-               .end = IRQ_PF9,
-               .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-       },
-};
-
-static struct platform_device smc91x_device = {
-       .name = "smc91x",
-       .id = 0,
-       .num_resources = ARRAY_SIZE(smc91x_resources),
-       .resource = smc91x_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
-       {
-               .start = 0xFFC00400,
-               .end = 0xFFC004FF,
-               .flags = IORESOURCE_MEM,
-       },
-       {
-               .start = IRQ_UART0_RX,
-               .end = IRQ_UART0_RX+1,
-               .flags = IORESOURCE_IRQ,
-       },
-       {
-               .start = CH_UART0_RX,
-               .end = CH_UART0_RX+1,
-               .flags = IORESOURCE_DMA,
-       },
-};
-
-static struct platform_device bfin_sir0_device = {
-       .name = "bfin_sir",
-       .id = 0,
-       .num_resources = ARRAY_SIZE(bfin_sir0_resources),
-       .resource = bfin_sir0_resources,
-};
-#endif
-#endif
-
-static struct platform_device *generic_board_devices[] __initdata = {
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-       &smc91x_device,
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-       &bfin_sir0_device,
-#endif
-#endif
-};
-
-static int __init generic_board_init(void)
-{
-       printk(KERN_INFO "%s(): registering device resources\n", __func__);
-       return platform_add_devices(generic_board_devices,
-                                   ARRAY_SIZE(generic_board_devices));
-}
-
-arch_initcall(generic_board_init);
index 1a9e17562821cd754ba1815aa449a2d8d4f5223e..d0b0b3506440fee5373c850b19cf703a94941681 100644 (file)
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf561/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
 #define ANOMALY_05000301 (1)
 /* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
 #define ANOMALY_05000302 (1)
-/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
 #define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
 /* SCKELOW Bit Does Not Maintain State Through Hibernate */
 #define ANOMALY_05000307 (__SILICON_REVISION__ < 5)
 #define ANOMALY_05000273 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000353 (1)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
index 043bfcf26c52a2250c4399a484904e0e0906e9af..ca8c5f6452093c7c8d9247906e35a8b1baf4fb9b 100644 (file)
@@ -134,7 +134,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
        CH_UART_TX,
        CH_UART_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
        CONFIG_UART0_CTS_PIN,
        CONFIG_UART0_RTS_PIN,
 #endif
index 98133b968f7b9eabab64d7f1e76d903fb3af2745..80d39b2f9db295d2709574664528a9c71b6ac1db 100644 (file)
 #if (CONFIG_BOOT_LOAD & 0x3)
 # error "The kernel load address must be 4 byte aligned"
 #endif
+
+/* The entire kernel must be able to make a 24bit pcrel call to start of L1 */
+#if ((0xffffffff - L1_CODE_START + 1) + CONFIG_BOOT_LOAD) > 0x1000000
+# error "The kernel load address is too high; keep it below 10meg for safety"
+#endif
+
+#if ANOMALY_05000448
+# error You are using a part with anomaly 05000448, this issue causes random memory read/write failures - that means random crashes.
+#endif
index 3c98dacbf2892960ec4053f3c3bfde85bbc01fd9..aa0648c6a9feb19111d2b8e60e96dfef12bc9340 100644 (file)
 
 /* Invalidate all instruction cache lines assocoiated with this memory area */
 ENTRY(_blackfin_icache_flush_range)
+/*
+ * Walkaround to avoid loading wrong instruction after invalidating icache
+ * and following sequence is met.
+ *
+ * 1) One instruction address is cached in the instruction cache.
+ * 2) This instruction in SDRAM is changed.
+ * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range().
+ * 4) This instruction is executed again, but the old one is loaded.
+ */
+       P0 = R0;
+       IFLUSH[P0];
        do_flush IFLUSH, , nop
 ENDPROC(_blackfin_icache_flush_range)
 
 /* Flush all cache lines assocoiated with this area of memory. */
 ENTRY(_blackfin_icache_dcache_flush_range)
+/*
+ * Walkaround to avoid loading wrong instruction after invalidating icache
+ * and following sequence is met.
+ *
+ * 1) One instruction address is cached in the instruction cache.
+ * 2) This instruction in SDRAM is changed.
+ * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range().
+ * 4) This instruction is executed again, but the old one is loaded.
+ */
+       P0 = R0;
+       IFLUSH[P0];
        do_flush FLUSH, IFLUSH
 ENDPROC(_blackfin_icache_dcache_flush_range)
 
index 9dddb6f8cc855296c5e98213bc45b8d76d123276..35393651359bfc004d996154fb7d8d2497e45b5b 100644 (file)
@@ -17,7 +17,7 @@
 #define SDGCTL_WIDTH (1 << 31) /* SDRAM external data path width */
 #define PLL_CTL_VAL \
        (((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \
-        (PLL_BYPASS << 8) | (ANOMALY_05000265 ? 0x8000 : 0))
+        (PLL_BYPASS << 8) | (ANOMALY_05000305 ? 0 : 0x8000))
 
 __attribute__((l1_text))
 static void do_sync(void)
index 4da50bcd9300de6fb96952bd0bdc0991b15bc183..8009a512fb1186214af8998e3400b73bb40d4f67 100644 (file)
@@ -376,10 +376,22 @@ ENTRY(_do_hibernate)
 #endif
 
 #ifdef PINT0_ASSIGN
+       PM_SYS_PUSH(PINT0_MASK_SET)
+       PM_SYS_PUSH(PINT1_MASK_SET)
+       PM_SYS_PUSH(PINT2_MASK_SET)
+       PM_SYS_PUSH(PINT3_MASK_SET)
        PM_SYS_PUSH(PINT0_ASSIGN)
        PM_SYS_PUSH(PINT1_ASSIGN)
        PM_SYS_PUSH(PINT2_ASSIGN)
        PM_SYS_PUSH(PINT3_ASSIGN)
+       PM_SYS_PUSH(PINT0_INVERT_SET)
+       PM_SYS_PUSH(PINT1_INVERT_SET)
+       PM_SYS_PUSH(PINT2_INVERT_SET)
+       PM_SYS_PUSH(PINT3_INVERT_SET)
+       PM_SYS_PUSH(PINT0_EDGE_SET)
+       PM_SYS_PUSH(PINT1_EDGE_SET)
+       PM_SYS_PUSH(PINT2_EDGE_SET)
+       PM_SYS_PUSH(PINT3_EDGE_SET)
 #endif
 
        PM_SYS_PUSH(EBIU_AMBCTL0)
@@ -714,10 +726,22 @@ ENTRY(_do_hibernate)
        PM_SYS_POP(EBIU_AMBCTL0)
 
 #ifdef PINT0_ASSIGN
+       PM_SYS_POP(PINT3_EDGE_SET)
+       PM_SYS_POP(PINT2_EDGE_SET)
+       PM_SYS_POP(PINT1_EDGE_SET)
+       PM_SYS_POP(PINT0_EDGE_SET)
+       PM_SYS_POP(PINT3_INVERT_SET)
+       PM_SYS_POP(PINT2_INVERT_SET)
+       PM_SYS_POP(PINT1_INVERT_SET)
+       PM_SYS_POP(PINT0_INVERT_SET)
        PM_SYS_POP(PINT3_ASSIGN)
        PM_SYS_POP(PINT2_ASSIGN)
        PM_SYS_POP(PINT1_ASSIGN)
        PM_SYS_POP(PINT0_ASSIGN)
+       PM_SYS_POP(PINT3_MASK_SET)
+       PM_SYS_POP(PINT2_MASK_SET)
+       PM_SYS_POP(PINT1_MASK_SET)
+       PM_SYS_POP(PINT0_MASK_SET)
 #endif
 
 #ifdef SICA_IWR1
index 88de053bbe8ed58dcdb6e7b4bad80657a3e011db..21e65a339a22aacb857d1a76cdbe93863743298b 100644 (file)
@@ -600,6 +600,19 @@ ENTRY(_system_call)
        p2 = [p2];
 
        [p2+(TASK_THREAD+THREAD_KSP)] = sp;
+#ifdef CONFIG_IPIPE
+       r0 = sp;
+       SP += -12;
+       call ___ipipe_syscall_root;
+       SP += 12;
+       cc = r0 == 1;
+       if cc jump .Lsyscall_really_exit;
+       cc = r0 == -1;
+       if cc jump .Lresume_userspace;
+       r3 = [sp + PT_R3];
+       r4 = [sp + PT_R4];
+       p0 = [sp + PT_ORIG_P0];
+#endif /* CONFIG_IPIPE */
 
        /* Check the System Call */
        r7 = __NR_syscall;
@@ -654,6 +667,17 @@ ENTRY(_system_call)
        r7 =  r7 & r4;
 
 .Lsyscall_resched:
+#ifdef CONFIG_IPIPE
+       cc = BITTST(r7, TIF_IRQ_SYNC);
+       if !cc jump .Lsyscall_no_irqsync;
+       [--sp] = reti;
+       r0 = [sp++];
+       SP += -12;
+       call ___ipipe_sync_root;
+       SP += 12;
+       jump .Lresume_userspace_1;
+.Lsyscall_no_irqsync:
+#endif
        cc = BITTST(r7, TIF_NEED_RESCHED);
        if !cc jump .Lsyscall_sigpending;
 
@@ -685,6 +709,10 @@ ENTRY(_system_call)
 .Lsyscall_really_exit:
        r5 = [sp + PT_RESERVED];
        rets = r5;
+#ifdef CONFIG_IPIPE
+       [--sp] = reti;
+       r5 = [sp++];
+#endif /* CONFIG_IPIPE */
        rts;
 ENDPROC(_system_call)
 
@@ -771,6 +799,15 @@ _new_old_task:
 ENDPROC(_resume)
 
 ENTRY(_ret_from_exception)
+#ifdef CONFIG_IPIPE
+       [--sp] = rets;
+       SP += -12;
+       call ___ipipe_check_root
+       SP += 12
+       rets = [sp++];
+       cc = r0 == 0;
+       if cc jump 4f;                /* not on behalf of Linux, get out */
+#endif /* CONFIG_IPIPE */
        p2.l = lo(IPEND);
        p2.h = hi(IPEND);
 
@@ -827,6 +864,28 @@ ENTRY(_ret_from_exception)
        rts;
 ENDPROC(_ret_from_exception)
 
+#ifdef CONFIG_IPIPE
+
+_sync_root_irqs:
+       [--sp] = reti;          /* Reenable interrupts */
+       r0 = [sp++];
+       jump.l ___ipipe_sync_root
+
+_resume_kernel_from_int:
+       r0.l = _sync_root_irqs
+       r0.h = _sync_root_irqs
+       [--sp] = rets;
+       [--sp] = ( r7:4, p5:3 );
+       SP += -12;
+       call ___ipipe_call_irqtail
+       SP += 12;
+       ( r7:4, p5:3 ) = [sp++];
+       rets = [sp++];
+       rts
+#else
+#define _resume_kernel_from_int         2f
+#endif
+
 ENTRY(_return_from_int)
        /* If someone else already raised IRQ 15, do nothing.  */
        csync;
@@ -848,7 +907,7 @@ ENTRY(_return_from_int)
        r1 = r0 - r1;
        r2 = r0 & r1;
        cc = r2 == 0;
-       if !cc jump 2f;
+       if !cc jump _resume_kernel_from_int;
 
        /* Lower the interrupt level to 15.  */
        p0.l = lo(EVT15);
index 43c4eb9acb65e11b0ce1c0fdc480cb1849005a4d..0069c2dd462520db2a1abb7ad4c54108efcc5203 100644 (file)
@@ -235,6 +235,7 @@ ENDPROC(_evt_system_call)
 
 #ifdef CONFIG_IPIPE
 ENTRY(___ipipe_call_irqtail)
+       p0 = r0;
        r0.l = 1f;
        r0.h = 1f;
        reti = r0;
@@ -242,9 +243,6 @@ ENTRY(___ipipe_call_irqtail)
 1:
        [--sp] = rets;
        [--sp] = ( r7:4, p5:3 );
-       p0.l = ___ipipe_irq_tail_hook;
-       p0.h = ___ipipe_irq_tail_hook;
-       p0 = [p0];
        sp += -12;
        call (p0);
        sp += 12;
@@ -259,7 +257,7 @@ ENTRY(___ipipe_call_irqtail)
        p0.h = hi(EVT14);
        [p0] = r0;
        csync;
-       r0 = 0x401f;
+       r0 = 0x401f (z);
        sti r0;
        raise 14;
        [--sp] = reti;          /* IRQs on. */
@@ -277,11 +275,7 @@ ENTRY(___ipipe_call_irqtail)
        p0.h = _bfin_irq_flags;
        r0 = [p0];
        sti r0;
-#if 0 /* FIXME: this actually raises scheduling latencies */
-       /* Reenable interrupts */
-       [--sp] = reti;
-       r0 = [sp++];
-#endif
        rts;
 ENDPROC(___ipipe_call_irqtail)
+
 #endif /* CONFIG_IPIPE */
index 202494568c6c0303b76cafb279b1b06f97fc9963..a7d7b2dd4059a7f5685cec710bb9409174c31589 100644 (file)
@@ -161,11 +161,15 @@ static void bfin_core_unmask_irq(unsigned int irq)
 
 static void bfin_internal_mask_irq(unsigned int irq)
 {
+       unsigned long flags;
+
 #ifdef CONFIG_BF53x
+       local_irq_save_hw(flags);
        bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
                             ~(1 << SIC_SYSIRQ(irq)));
 #else
        unsigned mask_bank, mask_bit;
+       local_irq_save_hw(flags);
        mask_bank = SIC_SYSIRQ(irq) / 32;
        mask_bit = SIC_SYSIRQ(irq) % 32;
        bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) &
@@ -175,15 +179,20 @@ static void bfin_internal_mask_irq(unsigned int irq)
                             ~(1 << mask_bit));
 #endif
 #endif
+       local_irq_restore_hw(flags);
 }
 
 static void bfin_internal_unmask_irq(unsigned int irq)
 {
+       unsigned long flags;
+
 #ifdef CONFIG_BF53x
+       local_irq_save_hw(flags);
        bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() |
                             (1 << SIC_SYSIRQ(irq)));
 #else
        unsigned mask_bank, mask_bit;
+       local_irq_save_hw(flags);
        mask_bank = SIC_SYSIRQ(irq) / 32;
        mask_bit = SIC_SYSIRQ(irq) % 32;
        bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) |
@@ -193,6 +202,7 @@ static void bfin_internal_unmask_irq(unsigned int irq)
                             (1 << mask_bit));
 #endif
 #endif
+       local_irq_restore_hw(flags);
 }
 
 #ifdef CONFIG_PM
@@ -390,7 +400,7 @@ static void bfin_demux_error_irq(unsigned int int_err_irq,
 static inline void bfin_set_irq_handler(unsigned irq, irq_flow_handler_t handle)
 {
 #ifdef CONFIG_IPIPE
-       _set_irq_handler(irq, handle_edge_irq);
+       _set_irq_handler(irq, handle_level_irq);
 #else
        struct irq_desc *desc = irq_desc + irq;
        /* May not call generic set_irq_handler() due to spinlock
@@ -1055,13 +1065,18 @@ int __init init_arch_irq(void)
 #endif
                default:
 #ifdef CONFIG_IPIPE
-       /*
-        * We want internal interrupt sources to be masked, because
-        * ISRs may trigger interrupts recursively (e.g. DMA), but
-        * interrupts are _not_ masked at CPU level. So let's handle
-        * them as level interrupts.
-        */
-                       set_irq_handler(irq, handle_level_irq);
+                       /*
+                        * We want internal interrupt sources to be
+                        * masked, because ISRs may trigger interrupts
+                        * recursively (e.g. DMA), but interrupts are
+                        * _not_ masked at CPU level. So let's handle
+                        * most of them as level interrupts, except
+                        * the timer interrupt which is special.
+                        */
+                       if (irq == IRQ_SYSTMR || irq == IRQ_CORETMR)
+                               set_irq_handler(irq, handle_simple_irq);
+                       else
+                               set_irq_handler(irq, handle_level_irq);
 #else /* !CONFIG_IPIPE */
                        set_irq_handler(irq, handle_simple_irq);
 #endif /* !CONFIG_IPIPE */
@@ -1123,9 +1138,8 @@ int __init init_arch_irq(void)
 
 #ifdef CONFIG_IPIPE
        for (irq = 0; irq < NR_IRQS; irq++) {
-               struct irq_desc *desc = irq_desc + irq;
+               struct irq_desc *desc = irq_to_desc(irq);
                desc->ic_prio = __ipipe_get_irq_priority(irq);
-               desc->thr_prio = __ipipe_get_irqthread_priority(irq);
        }
 #endif /* CONFIG_IPIPE */
 
@@ -1208,76 +1222,21 @@ int __ipipe_get_irq_priority(unsigned irq)
        return IVG15;
 }
 
-int __ipipe_get_irqthread_priority(unsigned irq)
-{
-       int ient, prio;
-       int demux_irq;
-
-       /* The returned priority value is rescaled to [0..IVG13+1]
-        * with 0 being the lowest effective priority level. */
-
-       if (irq <= IRQ_CORETMR)
-               return IVG13 - irq + 1;
-
-       /* GPIO IRQs are given the priority of the demux
-        * interrupt. */
-       if (IS_GPIOIRQ(irq)) {
-#if defined(CONFIG_BF54x)
-               u32 bank = PINT_2_BANK(irq2pint_lut[irq - SYS_IRQS]);
-               demux_irq = (bank == 0 ? IRQ_PINT0 :
-                               bank == 1 ? IRQ_PINT1 :
-                               bank == 2 ? IRQ_PINT2 :
-                               IRQ_PINT3);
-#elif defined(CONFIG_BF561)
-               demux_irq = (irq >= IRQ_PF32 ? IRQ_PROG2_INTA :
-                               irq >= IRQ_PF16 ? IRQ_PROG1_INTA :
-                               IRQ_PROG0_INTA);
-#elif defined(CONFIG_BF52x)
-               demux_irq = (irq >= IRQ_PH0 ? IRQ_PORTH_INTA :
-                               irq >= IRQ_PG0 ? IRQ_PORTG_INTA :
-                               IRQ_PORTF_INTA);
-#else
-               demux_irq = irq;
-#endif
-               return IVG13 - PRIO_GPIODEMUX(demux_irq) + 1;
-       }
-
-       /* The GPIO demux interrupt is given a lower priority
-        * than the GPIO IRQs, so that its threaded handler
-        * unmasks the interrupt line after the decoded IRQs
-        * have been processed. */
-       prio = PRIO_GPIODEMUX(irq);
-       /* demux irq? */
-       if (prio != -1)
-               return IVG13 - prio;
-
-       for (ient = 0; ient < NR_PERI_INTS; ient++) {
-               struct ivgx *ivg = ivg_table + ient;
-               if (ivg->irqno == irq) {
-                       for (prio = 0; prio <= IVG13-IVG7; prio++) {
-                               if (ivg7_13[prio].ifirst <= ivg &&
-                                   ivg7_13[prio].istop > ivg)
-                                       return IVG7 - prio;
-                       }
-               }
-       }
-
-       return 0;
-}
-
 /* Hw interrupts are disabled on entry (check SAVE_CONTEXT). */
 #ifdef CONFIG_DO_IRQ_L1
 __attribute__((l1_text))
 #endif
 asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
 {
+       struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
+       struct ipipe_domain *this_domain = ipipe_current_domain;
        struct ivgx *ivg_stop = ivg7_13[vec-IVG7].istop;
        struct ivgx *ivg = ivg7_13[vec-IVG7].ifirst;
-       int irq;
+       int irq, s;
 
        if (likely(vec == EVT_IVTMR_P)) {
                irq = IRQ_CORETMR;
-               goto handle_irq;
+               goto core_tick;
        }
 
        SSYNC();
@@ -1319,24 +1278,39 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
        irq = ivg->irqno;
 
        if (irq == IRQ_SYSTMR) {
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+core_tick:
+#else
                bfin_write_TIMER_STATUS(1); /* Latch TIMIL0 */
+#endif
                /* This is basically what we need from the register frame. */
                __raw_get_cpu_var(__ipipe_tick_regs).ipend = regs->ipend;
                __raw_get_cpu_var(__ipipe_tick_regs).pc = regs->pc;
-               if (!ipipe_root_domain_p)
-                       __raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10;
-               else
+               if (this_domain != ipipe_root_domain)
                        __raw_get_cpu_var(__ipipe_tick_regs).ipend &= ~0x10;
+               else
+                       __raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10;
        }
 
-handle_irq:
+#ifndef CONFIG_GENERIC_CLOCKEVENTS
+core_tick:
+#endif
+       if (this_domain == ipipe_root_domain) {
+               s = __test_and_set_bit(IPIPE_SYNCDEFER_FLAG, &p->status);
+               barrier();
+       }
 
        ipipe_trace_irq_entry(irq);
        __ipipe_handle_irq(irq, regs);
-       ipipe_trace_irq_exit(irq);
+       ipipe_trace_irq_exit(irq);
 
-       if (ipipe_root_domain_p)
-               return !test_bit(IPIPE_STALL_FLAG, &ipipe_root_cpudom_var(status));
+       if (this_domain == ipipe_root_domain) {
+               set_thread_flag(TIF_IRQ_SYNC);
+               if (!s) {
+                       __clear_bit(IPIPE_SYNCDEFER_FLAG, &p->status);
+                       return !test_bit(IPIPE_STALL_FLAG, &p->status);
+               }
+       }
 
        return 0;
 }
index 77c9928470944d0c4ceeecb7a691b45482e1fb09..93eab61460792b8a10d08f7ce33ee3d1d9f1d853 100644 (file)
@@ -158,10 +158,14 @@ static irqreturn_t ipi_handler(int irq, void *dev_instance)
                        kfree(msg);
                        break;
                case BFIN_IPI_CALL_FUNC:
+                       spin_unlock(&msg_queue->lock);
                        ipi_call_function(cpu, msg);
+                       spin_lock(&msg_queue->lock);
                        break;
                case BFIN_IPI_CPU_STOP:
+                       spin_unlock(&msg_queue->lock);
                        ipi_cpu_stop(cpu);
+                       spin_lock(&msg_queue->lock);
                        kfree(msg);
                        break;
                default:
@@ -457,7 +461,7 @@ void smp_icache_flush_range_others(unsigned long start, unsigned long end)
        smp_flush_data.start = start;
        smp_flush_data.end = end;
 
-       if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 1))
+       if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 0))
                printk(KERN_WARNING "SMP: failed to run I-cache flush request on other CPUs\n");
 }
 EXPORT_SYMBOL_GPL(smp_icache_flush_range_others);
index d0532b72bba56d34f31526fd5c889d71c89217b3..9c3629b9a689420edb42a34e3d7611c9650fbe57 100644 (file)
@@ -104,7 +104,7 @@ void __init paging_init(void)
        }
 }
 
-asmlinkage void init_pda(void)
+asmlinkage void __init init_pda(void)
 {
        unsigned int cpu = raw_smp_processor_id();
 
index e626e50a938a3ce91b2d9926f06d036d63f29609..060df4aa9916853297a0be09d4221c5a95e37654 100644 (file)
@@ -135,11 +135,10 @@ pcibr_dmatrans_direct64(struct pcidev_info * info, u64 paddr,
        if (SN_DMA_ADDRTYPE(dma_flags) == SN_DMA_ADDR_PHYS)
                pci_addr = IS_PIC_SOFT(pcibus_info) ?
                                PHYS_TO_DMA(paddr) :
-                               PHYS_TO_TIODMA(paddr) | dma_attributes;
+                               PHYS_TO_TIODMA(paddr);
        else
-               pci_addr = IS_PIC_SOFT(pcibus_info) ?
-                               paddr :
-                               paddr | dma_attributes;
+               pci_addr = paddr;
+       pci_addr |= dma_attributes;
 
        /* Handle Bus mode */
        if (IS_PCIX(pcibus_info))
index d01a5d2b75579190df5babe0f162a9b1eb947041..db902540bf2c980fb8f2e4e89c1915dddbf5dc88 100644 (file)
@@ -17,6 +17,7 @@
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfdma.h>
+#include <asm/mcfuart.h>
 
 /***************************************************************************/
 
index dfdb5c2ed8e6d35a3ce45b0827c03b61833c2eaf..44baeb225dc7bbc0c08003b1fd26fa34086ddf5a 100644 (file)
@@ -24,7 +24,6 @@
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
-#include <asm/mcfqspi.h>
 
 #ifdef CONFIG_MTD_PARTITIONS
 #include <linux/mtd/partitions.h>
 /***************************************************************************/
 
 void coldfire_reset(void);
-static void coldfire_qspi_cs_control(u8 cs, u8 command);
-
-/***************************************************************************/
-
-#if defined(CONFIG_SPI)
-
-#if defined(CONFIG_WILDFIRE)
-#define SPI_NUM_CHIPSELECTS    0x02
-#define SPI_PAR_VAL            0x07  /* Enable DIN, DOUT, CLK */
-#define SPI_CS_MASK            0x18
-
-#define FLASH_BLOCKSIZE                (1024*64)
-#define FLASH_NUMBLOCKS                16
-#define FLASH_TYPE             "m25p80"
-
-#define M25P80_CS              0
-#define MMC_CS                 1
-
-#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition stm25p_partitions[] = {
-       /* sflash */
-       [0] = {
-               .name = "stm25p80",
-               .offset = 0x00000000,
-               .size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS,
-               .mask_flags = 0
-       }
-};
-
-#endif
-
-#elif defined(CONFIG_WILDFIREMOD)
-
-#define SPI_NUM_CHIPSELECTS    0x08
-#define SPI_PAR_VAL            0x07  /* Enable DIN, DOUT, CLK */
-#define SPI_CS_MASK            0x78
-
-#define FLASH_BLOCKSIZE                (1024*64)
-#define FLASH_NUMBLOCKS                64
-#define FLASH_TYPE             "m25p32"
-/* Reserve 1M for the kernel parition */
-#define FLASH_KERNEL_SIZE   (1024 * 1024)
-
-#define M25P80_CS              5
-#define MMC_CS                 6
-
-#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition stm25p_partitions[] = {
-       /* sflash */
-       [0] = {
-               .name = "kernel",
-               .offset = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS - FLASH_KERNEL_SIZE,
-               .size = FLASH_KERNEL_SIZE,
-               .mask_flags = 0
-       },
-       [1] = {
-               .name = "image",
-               .offset = 0x00000000,
-               .size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS - FLASH_KERNEL_SIZE,
-               .mask_flags = 0
-       },
-       [2] = {
-               .name = "all",
-               .offset = 0x00000000,
-               .size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS,
-               .mask_flags = 0
-       }
-};
-#endif
-
-#else
-#define SPI_NUM_CHIPSELECTS    0x04
-#define SPI_PAR_VAL            0x7F  /* Enable DIN, DOUT, CLK, CS0 - CS4 */
-#endif
-
-#ifdef MMC_CS
-static struct coldfire_spi_chip flash_chip_info = {
-       .mode = SPI_MODE_0,
-       .bits_per_word = 16,
-       .del_cs_to_clk = 17,
-       .del_after_trans = 1,
-       .void_write_data = 0
-};
-
-static struct coldfire_spi_chip mmc_chip_info = {
-       .mode = SPI_MODE_0,
-       .bits_per_word = 16,
-       .del_cs_to_clk = 17,
-       .del_after_trans = 1,
-       .void_write_data = 0xFFFF
-};
-#endif
-
-#ifdef M25P80_CS
-static struct flash_platform_data stm25p80_platform_data = {
-       .name = "ST M25P80 SPI Flash chip",
-#ifdef CONFIG_MTD_PARTITIONS
-       .parts = stm25p_partitions,
-       .nr_parts = sizeof(stm25p_partitions) / sizeof(*stm25p_partitions),
-#endif
-       .type = FLASH_TYPE
-};
-#endif
-
-static struct spi_board_info spi_board_info[] __initdata = {
-#ifdef M25P80_CS
-       {
-               .modalias = "m25p80",
-               .max_speed_hz = 16000000,
-               .bus_num = 1,
-               .chip_select = M25P80_CS,
-               .platform_data = &stm25p80_platform_data,
-               .controller_data = &flash_chip_info
-       },
-#endif
-#ifdef MMC_CS
-       {
-               .modalias = "mmc_spi",
-               .max_speed_hz = 16000000,
-               .bus_num = 1,
-               .chip_select = MMC_CS,
-               .controller_data = &mmc_chip_info
-       }
-#endif
-};
-
-static struct coldfire_spi_master coldfire_master_info = {
-       .bus_num = 1,
-       .num_chipselect = SPI_NUM_CHIPSELECTS,
-       .irq_source = MCF5282_QSPI_IRQ_SOURCE,
-       .irq_vector = MCF5282_QSPI_IRQ_VECTOR,
-       .irq_mask = ((0x01 << MCF5282_QSPI_IRQ_SOURCE) | 0x01),
-       .irq_lp = 0x2B,  /* Level 5 and Priority 3 */
-       .par_val = SPI_PAR_VAL,
-       .cs_control = coldfire_qspi_cs_control,
-};
-
-static struct resource coldfire_spi_resources[] = {
-       [0] = {
-               .name = "qspi-par",
-               .start = MCF5282_QSPI_PAR,
-               .end = MCF5282_QSPI_PAR,
-               .flags = IORESOURCE_MEM
-       },
-
-       [1] = {
-               .name = "qspi-module",
-               .start = MCF5282_QSPI_QMR,
-               .end = MCF5282_QSPI_QMR + 0x18,
-               .flags = IORESOURCE_MEM
-       },
-
-       [2] = {
-               .name = "qspi-int-level",
-               .start = MCF5282_INTC0 + MCFINTC_ICR0 + MCF5282_QSPI_IRQ_SOURCE,
-               .end = MCF5282_INTC0 + MCFINTC_ICR0 + MCF5282_QSPI_IRQ_SOURCE,
-               .flags = IORESOURCE_MEM
-       },
-
-       [3] = {
-               .name = "qspi-int-mask",
-               .start = MCF5282_INTC0 + MCFINTC_IMRL,
-               .end = MCF5282_INTC0 + MCFINTC_IMRL,
-               .flags = IORESOURCE_MEM
-       }
-};
-
-static struct platform_device coldfire_spi = {
-       .name = "spi_coldfire",
-       .id = -1,
-       .resource = coldfire_spi_resources,
-       .num_resources = ARRAY_SIZE(coldfire_spi_resources),
-       .dev = {
-               .platform_data = &coldfire_master_info,
-       }
-};
-
-static void coldfire_qspi_cs_control(u8 cs, u8 command)
-{
-       u8 cs_bit = ((0x01 << cs) << 3) & SPI_CS_MASK;
-
-#if defined(CONFIG_WILDFIRE)
-       u8 cs_mask = ~(((0x01 << cs) << 3) & SPI_CS_MASK);
-#endif
-#if defined(CONFIG_WILDFIREMOD)
-       u8 cs_mask = (cs << 3) & SPI_CS_MASK;
-#endif
-
-       /*
-        * Don't do anything if the chip select is not
-        * one of the port qs pins.
-        */
-       if (command & QSPI_CS_INIT) {
-#if defined(CONFIG_WILDFIRE)
-               MCF5282_GPIO_DDRQS  |= cs_bit;
-               MCF5282_GPIO_PQSPAR &= ~cs_bit;
-#endif
-
-#if defined(CONFIG_WILDFIREMOD)
-               MCF5282_GPIO_DDRQS  |= SPI_CS_MASK;
-               MCF5282_GPIO_PQSPAR &= ~SPI_CS_MASK;
-#endif
-       }
-
-       if (command & QSPI_CS_ASSERT) {
-               MCF5282_GPIO_PORTQS &= ~SPI_CS_MASK;
-               MCF5282_GPIO_PORTQS |= cs_mask;
-       } else if (command & QSPI_CS_DROP) {
-               MCF5282_GPIO_PORTQS |= SPI_CS_MASK;
-       }
-}
-
-static int __init spi_dev_init(void)
-{
-       int retval;
-
-       retval = platform_device_register(&coldfire_spi);
-       if (retval < 0)
-               return retval;
-
-       if (ARRAY_SIZE(spi_board_info))
-               retval = spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
-       return retval;
-}
-
-#endif /* CONFIG_SPI */
 
 /***************************************************************************/
 
index f2baea3039bb8bfe6f95cc9828ff5dd0686b9510..0208723adf28e287d98d59bcc9afe2876b2cb184 100644 (file)
@@ -512,7 +512,7 @@ CONFIG_MD_LINEAR=m
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=m
-CONFIG_MD_RAID456=m
+CONFIG_MD_RAID456=y
 CONFIG_MD_RAID5_RESHAPE=y
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
index 9d5bd2a0af3d6af5b7d8ca1bad39a0fe5c0fea25..5380f1f582d90e421eed8ec919e0dd37604f0bc5 100644 (file)
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc9
-# Fri Jul 11 23:01:36 2008
+# Linux kernel version: 2.6.29-rc7
+# Wed Mar  4 23:07:16 2009
 #
 CONFIG_MIPS=y
 
@@ -18,8 +18,10 @@ CONFIG_MIPS=y
 # CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_MACH_EMMA is not set
 # CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
@@ -39,7 +41,11 @@ CONFIG_MIPS=y
 # CONFIG_SNI_RM is not set
 CONFIG_MACH_TX39XX=y
 # CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
 # CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_MACH_TXX9=y
 CONFIG_TOSHIBA_JMR3927=y
 CONFIG_SOC_TX3927=y
 # CONFIG_TOSHIBA_FPCIB0 is not set
@@ -54,12 +60,14 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_CEVT_TXX9=y
 CONFIG_GPIO_TXX9=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
 # CONFIG_HOTPLUG_CPU is not set
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_GPIO=y
@@ -87,6 +95,7 @@ CONFIG_CPU_TX39XX=y
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_R5000 is not set
 # CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
 # CONFIG_CPU_R6000 is not set
 # CONFIG_CPU_NEVADA is not set
 # CONFIG_CPU_R8000 is not set
@@ -94,6 +103,7 @@ CONFIG_CPU_TX39XX=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
 CONFIG_SYS_HAS_CPU_TX39XX=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
@@ -117,14 +127,12 @@ CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_UNEVICTABLE_LRU=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -159,6 +167,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
@@ -171,7 +188,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
@@ -188,26 +204,23 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -221,7 +234,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -231,12 +244,15 @@ CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_STUB is not set
 CONFIG_MMU=y
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
 
@@ -245,15 +261,12 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -293,6 +306,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -302,14 +316,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
 #
@@ -323,7 +332,89 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_DA is not set
@@ -336,6 +427,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -361,7 +453,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -383,6 +474,9 @@ CONFIG_PHYLIB=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -392,6 +486,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
@@ -399,6 +494,9 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -406,7 +504,6 @@ CONFIG_NET_PCI=y
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 CONFIG_TC35815=y
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -415,9 +512,11 @@ CONFIG_TC35815=y
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
+# CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -428,6 +527,10 @@ CONFIG_TC35815=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_PPP is not set
@@ -440,27 +543,7 @@ CONFIG_TC35815=y
 #
 # Input device support
 #
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+# CONFIG_INPUT is not set
 
 #
 # Hardware I/O ports
@@ -517,16 +600,22 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
 
 #
-# GPIO Support
+# Memory mapped GPIO expanders:
 #
 
 #
 # I2C GPIO expanders:
 #
 
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
 #
 # SPI GPIO expanders:
 #
@@ -542,6 +631,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
 CONFIG_TXX9_WDT=y
 
 #
@@ -549,18 +639,21 @@ CONFIG_TXX9_WDT=y
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -591,16 +684,26 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
@@ -626,27 +729,34 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 CONFIG_RTC_DRV_DS1742=y
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -676,28 +786,17 @@ CONFIG_INOTIFY_USER=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
@@ -726,7 +825,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_CMDLINE=""
 
 #
@@ -734,15 +842,18 @@ CONFIG_CMDLINE=""
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
index 83d5c58662c88ba0eb7f4962840aaba743dcf9eb..1efe977497dd5c9d0b83235154e772c92baefd74 100644 (file)
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc9
-# Fri Jul 11 23:03:21 2008
+# Linux kernel version: 2.6.29-rc7
+# Wed Mar  4 23:08:06 2009
 #
 CONFIG_MIPS=y
 
@@ -18,8 +18,10 @@ CONFIG_MIPS=y
 # CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_MACH_EMMA is not set
 # CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
@@ -39,20 +41,28 @@ CONFIG_MIPS=y
 # CONFIG_SNI_RM is not set
 # CONFIG_MACH_TX39XX is not set
 CONFIG_MACH_TX49XX=y
+# CONFIG_MIKROTIK_RB532 is not set
 # CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_MACH_TXX9=y
 CONFIG_TOSHIBA_RBTX4927=y
 CONFIG_TOSHIBA_RBTX4938=y
+CONFIG_TOSHIBA_RBTX4939=y
 CONFIG_SOC_TX4927=y
 CONFIG_SOC_TX4938=y
+CONFIG_SOC_TX4939=y
+CONFIG_TXX9_7SEGLED=y
 # CONFIG_TOSHIBA_FPCIB0 is not set
 CONFIG_PICMG_PCI_BACKPLANE_DEFAULT=y
 
 #
 # Multiplex Pin Select
 #
-CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61=y
+# CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61 is not set
 # CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND is not set
 # CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA is not set
+CONFIG_TOSHIBA_RBTX4938_MPLEX_KEEP=y
 CONFIG_PCI_TX4927=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
@@ -64,14 +74,18 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
 CONFIG_CEVT_R4K=y
 CONFIG_CEVT_TXX9=y
+CONFIG_CSRC_R4K_LIB=y
 CONFIG_CSRC_R4K=y
 CONFIG_GPIO_TXX9=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
 # CONFIG_HOTPLUG_CPU is not set
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_GPIO=y
@@ -100,6 +114,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 CONFIG_CPU_TX49XX=y
 # CONFIG_CPU_R5000 is not set
 # CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
 # CONFIG_CPU_R6000 is not set
 # CONFIG_CPU_NEVADA is not set
 # CONFIG_CPU_R8000 is not set
@@ -107,6 +122,7 @@ CONFIG_CPU_TX49XX=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
 CONFIG_SYS_HAS_CPU_TX49XX=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
@@ -134,13 +150,12 @@ CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -176,6 +191,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -190,7 +214,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
@@ -207,30 +230,26 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
+CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -244,7 +263,8 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_PROBE_INITRD_HEADER is not set
+# CONFIG_FREEZER is not set
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -254,12 +274,15 @@ CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 CONFIG_MMU=y
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
 
@@ -268,15 +291,12 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -318,6 +338,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -327,14 +348,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
 #
@@ -348,7 +364,90 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_DA is not set
@@ -365,9 +464,60 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_TIMINGS=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+CONFIG_BLK_DEV_IDE_TX4938=y
+CONFIG_BLK_DEV_IDE_TX4939=y
+CONFIG_BLK_DEV_IDEDMA=y
 
 #
 # SCSI device support
@@ -390,7 +540,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -412,15 +561,19 @@ CONFIG_PHYLIB=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+CONFIG_SMC91X=y
 # CONFIG_DM9000 is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
@@ -429,6 +582,9 @@ CONFIG_NE2000=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -436,7 +592,6 @@ CONFIG_NET_PCI=y
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 CONFIG_TC35815=y
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -445,9 +600,11 @@ CONFIG_TC35815=y
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
+# CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -458,6 +615,10 @@ CONFIG_TC35815=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_PPP is not set
@@ -502,6 +663,7 @@ CONFIG_SERIAL_TXX9_CONSOLE=y
 CONFIG_SERIAL_TXX9_STDSERIAL=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -517,26 +679,34 @@ CONFIG_SPI_MASTER=y
 #
 # SPI Master Controller Drivers
 #
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_TXX9=y
 
 #
 # SPI Protocol Masters
 #
-CONFIG_EEPROM_AT25=y
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
 
 #
-# GPIO Support
+# Memory mapped GPIO expanders:
 #
 
 #
 # I2C GPIO expanders:
 #
 
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
 #
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
@@ -550,6 +720,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
 CONFIG_TXX9_WDT=m
 
 #
@@ -557,18 +728,21 @@ CONFIG_TXX9_WDT=m
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -599,15 +773,27 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
@@ -628,35 +814,47 @@ CONFIG_RTC_INTF_DEV_UIE_EMUL=y
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 CONFIG_RTC_DRV_RS5C348=y
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 CONFIG_RTC_DRV_DS1742=y
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
+CONFIG_RTC_DRV_TX4939=y
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
@@ -687,30 +885,19 @@ CONFIG_GENERIC_ACL=y
 CONFIG_PROC_FS=y
 # CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set