#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
+#include <linux/hdreg.h>
#include <asm/uaccess.h>
#include "libata.h"
+#define SECTOR_SIZE 512
+
typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, u8 *scsicmd);
static struct ata_device *
ata_scsi_find_dev(struct ata_port *ap, struct scsi_device *scsidev);
return 0;
}
+/**
+ * ata_cmd_ioctl - Handler for HDIO_DRIVE_CMD ioctl
+ * @dev: Device to whom we are issuing command
+ * @arg: User provided data for issuing command
+ *
+ * LOCKING:
+ * Defined by the SCSI layer. We don't really care.
+ *
+ * RETURNS:
+ * Zero on success, negative errno on error.
+ */
+
+int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg)
+{
+ int rc = 0;
+ u8 scsi_cmd[MAX_COMMAND_SIZE];
+ u8 args[4], *argbuf = NULL;
+ int argsize = 0;
+ struct scsi_request *sreq;
+
+ if (NULL == (void *)arg)
+ return -EINVAL;
+
+ if (copy_from_user(args, arg, sizeof(args)))
+ return -EFAULT;
+
+ sreq = scsi_allocate_request(scsidev, GFP_KERNEL);
+ if (!sreq)
+ return -EINTR;
+
+ memset(scsi_cmd, 0, sizeof(scsi_cmd));
+
+ if (args[3]) {
+ argsize = SECTOR_SIZE * args[3];
+ argbuf = kmalloc(argsize, GFP_KERNEL);
+ if (argbuf == NULL)
+ return -ENOMEM;
+
+ scsi_cmd[1] = (4 << 1); /* PIO Data-in */
+ scsi_cmd[2] = 0x0e; /* no off.line or cc, read from dev,
+ block count in sector count field */
+ sreq->sr_data_direction = DMA_FROM_DEVICE;
+ } else {
+ scsi_cmd[1] = (3 << 1); /* Non-data */
+ /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */
+ sreq->sr_data_direction = DMA_NONE;
+ }
+
+ scsi_cmd[0] = ATA_16;
+
+ scsi_cmd[4] = args[2];
+ if (args[0] == WIN_SMART) { /* hack -- ide driver does this too... */
+ scsi_cmd[6] = args[3];
+ scsi_cmd[8] = args[1];
+ scsi_cmd[10] = 0x4f;
+ scsi_cmd[12] = 0xc2;
+ } else {
+ scsi_cmd[6] = args[1];
+ }
+ scsi_cmd[14] = args[0];
+
+ /* Good values for timeout and retries? Values below
+ from scsi_ioctl_send_command() for default case... */
+ scsi_wait_req(sreq, scsi_cmd, argbuf, argsize, (10*HZ), 5);
+
+ if (sreq->sr_result) {
+ rc = -EIO;
+ goto error;
+ }
+
+ /* Need code to retrieve data from check condition? */
+
+ if ((argbuf)
+ && copy_to_user((void *)(arg + sizeof(args)), argbuf, argsize))
+ rc = -EFAULT;
+error:
+ scsi_release_request(sreq);
+
+ if (argbuf)
+ kfree(argbuf);
+
+ return rc;
+}
+
+/**
+ * ata_task_ioctl - Handler for HDIO_DRIVE_TASK ioctl
+ * @dev: Device to whom we are issuing command
+ * @arg: User provided data for issuing command
+ *
+ * LOCKING:
+ * Defined by the SCSI layer. We don't really care.
+ *
+ * RETURNS:
+ * Zero on success, negative errno on error.
+ */
+int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg)
+{
+ int rc = 0;
+ u8 scsi_cmd[MAX_COMMAND_SIZE];
+ u8 args[7];
+ struct scsi_request *sreq;
+
+ if (NULL == (void *)arg)
+ return -EINVAL;
+
+ if (copy_from_user(args, arg, sizeof(args)))
+ return -EFAULT;
+
+ memset(scsi_cmd, 0, sizeof(scsi_cmd));
+ scsi_cmd[0] = ATA_16;
+ scsi_cmd[1] = (3 << 1); /* Non-data */
+ /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */
+ scsi_cmd[4] = args[1];
+ scsi_cmd[6] = args[2];
+ scsi_cmd[8] = args[3];
+ scsi_cmd[10] = args[4];
+ scsi_cmd[12] = args[5];
+ scsi_cmd[14] = args[0];
+
+ sreq = scsi_allocate_request(scsidev, GFP_KERNEL);
+ if (!sreq) {
+ rc = -EINTR;
+ goto error;
+ }
+
+ sreq->sr_data_direction = DMA_NONE;
+ /* Good values for timeout and retries? Values below
+ from scsi_ioctl_send_command() for default case... */
+ scsi_wait_req(sreq, scsi_cmd, NULL, 0, (10*HZ), 5);
+
+ if (sreq->sr_result) {
+ rc = -EIO;
+ goto error;
+ }
+
+ /* Need code to retrieve data from check condition? */
+
+error:
+ scsi_release_request(sreq);
+ return rc;
+}
+
int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg)
{
struct ata_port *ap;
return -EINVAL;
return 0;
+ case HDIO_DRIVE_CMD:
+ if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
+ return -EACCES;
+ return ata_cmd_ioctl(scsidev, arg);
+
+ case HDIO_DRIVE_TASK:
+ if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
+ return -EACCES;
+ return ata_task_ioctl(scsidev, arg);
+
default:
rc = -ENOTTY;
break;
return qc;
}
+/**
+ * ata_dump_status - user friendly display of error info
+ * @id: id of the port in question
+ * @tf: ptr to filled out taskfile
+ *
+ * Decode and dump the ATA error/status registers for the user so
+ * that they have some idea what really happened at the non
+ * make-believe layer.
+ *
+ * LOCKING:
+ * inherited from caller
+ */
+void ata_dump_status(unsigned id, struct ata_taskfile *tf)
+{
+ u8 stat = tf->command, err = tf->feature;
+
+ printk(KERN_WARNING "ata%u: status=0x%02x { ", id, stat);
+ if (stat & ATA_BUSY) {
+ printk("Busy }\n"); /* Data is not valid in this case */
+ } else {
+ if (stat & 0x40) printk("DriveReady ");
+ if (stat & 0x20) printk("DeviceFault ");
+ if (stat & 0x10) printk("SeekComplete ");
+ if (stat & 0x08) printk("DataRequest ");
+ if (stat & 0x04) printk("CorrectedError ");
+ if (stat & 0x02) printk("Index ");
+ if (stat & 0x01) printk("Error ");
+ printk("}\n");
+
+ if (err) {
+ printk(KERN_WARNING "ata%u: error=0x%02x { ", id, err);
+ if (err & 0x04) printk("DriveStatusError ");
+ if (err & 0x80) {
+ if (err & 0x04) printk("BadCRC ");
+ else printk("Sector ");
+ }
+ if (err & 0x40) printk("UncorrectableError ");
+ if (err & 0x10) printk("SectorIdNotFound ");
+ if (err & 0x02) printk("TrackZeroNotFound ");
+ if (err & 0x01) printk("AddrMarkNotFound ");
+ printk("}\n");
+ }
+ }
+}
+
/**
* ata_to_sense_error - convert ATA error to SCSI error
- * @qc: Command that we are erroring out
* @drv_stat: value contained in ATA status register
+ * @drv_err: value contained in ATA error register
+ * @sk: the sense key we'll fill out
+ * @asc: the additional sense code we'll fill out
+ * @ascq: the additional sense code qualifier we'll fill out
*
- * Converts an ATA error into a SCSI error. While we are at it
- * we decode and dump the ATA error for the user so that they
- * have some idea what really happened at the non make-believe
- * layer.
+ * Converts an ATA error into a SCSI error. Fill out pointers to
+ * SK, ASC, and ASCQ bytes for later use in fixed or descriptor
+ * format sense blocks.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
*/
-
-void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat)
+void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc,
+ u8 *ascq)
{
- struct scsi_cmnd *cmd = qc->scsicmd;
- u8 err = 0;
- unsigned char *sb = cmd->sense_buffer;
+ int i;
/* Based on the 3ware driver translation table */
static unsigned char sense_table[][4] = {
/* BBD|ECC|ID|MAR */
{0x04, RECOVERED_ERROR, 0x11, 0x00}, // Recovered ECC error Medium error, recovered
{0xFF, 0xFF, 0xFF, 0xFF}, // END mark
};
- int i = 0;
-
- cmd->result = SAM_STAT_CHECK_CONDITION;
/*
* Is this an error we can process/parse
*/
-
- if(drv_stat & ATA_ERR)
- /* Read the err bits */
- err = ata_chk_err(qc->ap);
-
- /* Display the ATA level error info */
-
- printk(KERN_WARNING "ata%u: status=0x%02x { ", qc->ap->id, drv_stat);
- if(drv_stat & 0x80)
- {
- printk("Busy ");
- err = 0; /* Data is not valid in this case */
+ if (drv_stat & ATA_BUSY) {
+ drv_err = 0; /* Ignore the err bits, they're invalid */
}
- else {
- if(drv_stat & 0x40) printk("DriveReady ");
- if(drv_stat & 0x20) printk("DeviceFault ");
- if(drv_stat & 0x10) printk("SeekComplete ");
- if(drv_stat & 0x08) printk("DataRequest ");
- if(drv_stat & 0x04) printk("CorrectedError ");
- if(drv_stat & 0x02) printk("Index ");
- if(drv_stat & 0x01) printk("Error ");
+
+ if (drv_err) {
+ /* Look for drv_err */
+ for (i = 0; sense_table[i][0] != 0xFF; i++) {
+ /* Look for best matches first */
+ if ((sense_table[i][0] & drv_err) ==
+ sense_table[i][0]) {
+ *sk = sense_table[i][1];
+ *asc = sense_table[i][2];
+ *ascq = sense_table[i][3];
+ goto translate_done;
+ }
+ }
+ /* No immediate match */
+ printk(KERN_WARNING "ata%u: no sense translation for "
+ "error 0x%02x\n", id, drv_err);
}
- printk("}\n");
-
- if(err)
- {
- printk(KERN_WARNING "ata%u: error=0x%02x { ", qc->ap->id, err);
- if(err & 0x04) printk("DriveStatusError ");
- if(err & 0x80)
- {
- if(err & 0x04)
- printk("BadCRC ");
- else
- printk("Sector ");
+
+ /* Fall back to interpreting status bits */
+ for (i = 0; stat_table[i][0] != 0xFF; i++) {
+ if (stat_table[i][0] & drv_stat) {
+ *sk = stat_table[i][1];
+ *asc = stat_table[i][2];
+ *ascq = stat_table[i][3];
+ goto translate_done;
}
- if(err & 0x40) printk("UncorrectableError ");
- if(err & 0x10) printk("SectorIdNotFound ");
- if(err & 0x02) printk("TrackZeroNotFound ");
- if(err & 0x01) printk("AddrMarkNotFound ");
- printk("}\n");
+ }
+ /* No error? Undecoded? */
+ printk(KERN_WARNING "ata%u: no sense translation for status: 0x%02x\n",
+ id, drv_stat);
+
+ /* For our last chance pick, use medium read error because
+ * it's much more common than an ATA drive telling you a write
+ * has failed.
+ */
+ *sk = MEDIUM_ERROR;
+ *asc = 0x11; /* "unrecovered read error" */
+ *ascq = 0x04; /* "auto-reallocation failed" */
+
+ translate_done:
+ printk(KERN_ERR "ata%u: translated ATA stat/err 0x%02x/%02x to "
+ "SCSI SK/ASC/ASCQ 0x%x/%02x/%02x\n", id, drv_stat, drv_err,
+ *sk, *asc, *ascq);
+ return;
+}
+
+/*
+ * ata_gen_ata_desc_sense - Generate check condition sense block.
+ * @qc: Command that completed.
+ *
+ * This function is specific to the ATA descriptor format sense
+ * block specified for the ATA pass through commands. Regardless
+ * of whether the command errored or not, return a sense
+ * block. Copy all controller registers into the sense
+ * block. Clear sense key, ASC & ASCQ if there is no error.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *cmd = qc->scsicmd;
+ struct ata_taskfile *tf = &qc->tf;
+ unsigned char *sb = cmd->sense_buffer;
+ unsigned char *desc = sb + 8;
+
+ memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
- /* Should we dump sector info here too ?? */
+ cmd->result = SAM_STAT_CHECK_CONDITION;
+
+ /*
+ * Read the controller registers.
+ */
+ assert(NULL != qc->ap->ops->tf_read);
+ qc->ap->ops->tf_read(qc->ap, tf);
+
+ /*
+ * Use ata_to_sense_error() to map status register bits
+ * onto sense key, asc & ascq.
+ */
+ if (unlikely(tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ))) {
+ ata_to_sense_error(qc->ap->id, tf->command, tf->feature,
+ &sb[1], &sb[2], &sb[3]);
+ sb[1] &= 0x0f;
}
+ /*
+ * Sense data is current and format is descriptor.
+ */
+ sb[0] = 0x72;
- /* Look for err */
- while(sense_table[i][0] != 0xFF)
- {
- /* Look for best matches first */
- if((sense_table[i][0] & err) == sense_table[i][0])
- {
- sb[0] = 0x70;
- sb[2] = sense_table[i][1];
- sb[7] = 0x0a;
- sb[12] = sense_table[i][2];
- sb[13] = sense_table[i][3];
- return;
- }
- i++;
+ desc[0] = 0x09;
+
+ /*
+ * Set length of additional sense data.
+ * Since we only populate descriptor 0, the total
+ * length is the same (fixed) length as descriptor 0.
+ */
+ desc[1] = sb[7] = 14;
+
+ /*
+ * Copy registers into sense buffer.
+ */
+ desc[2] = 0x00;
+ desc[3] = tf->feature; /* == error reg */
+ desc[5] = tf->nsect;
+ desc[7] = tf->lbal;
+ desc[9] = tf->lbam;
+ desc[11] = tf->lbah;
+ desc[12] = tf->device;
+ desc[13] = tf->command; /* == status reg */
+
+ /*
+ * Fill in Extend bit, and the high order bytes
+ * if applicable.
+ */
+ if (tf->flags & ATA_TFLAG_LBA48) {
+ desc[2] |= 0x01;
+ desc[4] = tf->hob_nsect;
+ desc[6] = tf->hob_lbal;
+ desc[8] = tf->hob_lbam;
+ desc[10] = tf->hob_lbah;
}
- /* No immediate match */
- if(err)
- printk(KERN_DEBUG "ata%u: no sense translation for 0x%02x\n", qc->ap->id, err);
+}
- i = 0;
- /* Fall back to interpreting status bits */
- while(stat_table[i][0] != 0xFF)
- {
- if(stat_table[i][0] & drv_stat)
- {
- sb[0] = 0x70;
- sb[2] = stat_table[i][1];
- sb[7] = 0x0a;
- sb[12] = stat_table[i][2];
- sb[13] = stat_table[i][3];
- return;
- }
- i++;
+/**
+ * ata_gen_fixed_sense - generate a SCSI fixed sense block
+ * @qc: Command that we are erroring out
+ *
+ * Leverage ata_to_sense_error() to give us the codes. Fit our
+ * LBA in here if there's room.
+ *
+ * LOCKING:
+ * inherited from caller
+ */
+void ata_gen_fixed_sense(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *cmd = qc->scsicmd;
+ struct ata_taskfile *tf = &qc->tf;
+ unsigned char *sb = cmd->sense_buffer;
+
+ memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
+
+ cmd->result = SAM_STAT_CHECK_CONDITION;
+
+ /*
+ * Read the controller registers.
+ */
+ assert(NULL != qc->ap->ops->tf_read);
+ qc->ap->ops->tf_read(qc->ap, tf);
+
+ /*
+ * Use ata_to_sense_error() to map status register bits
+ * onto sense key, asc & ascq.
+ */
+ if (unlikely(tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ))) {
+ ata_to_sense_error(qc->ap->id, tf->command, tf->feature,
+ &sb[2], &sb[12], &sb[13]);
+ sb[2] &= 0x0f;
}
- /* No error ?? */
- printk(KERN_ERR "ata%u: called with no error (%02X)!\n", qc->ap->id, drv_stat);
- /* additional-sense-code[-qualifier] */
sb[0] = 0x70;
- sb[2] = MEDIUM_ERROR;
- sb[7] = 0x0A;
- if (cmd->sc_data_direction == DMA_FROM_DEVICE) {
- sb[12] = 0x11; /* "unrecovered read error" */
- sb[13] = 0x04;
- } else {
- sb[12] = 0x0C; /* "write error - */
- sb[13] = 0x02; /* auto-reallocation failed" */
+ sb[7] = 0x0a;
+
+#if 0 /* when C/H/S support is merged */
+ if (tf->flags & ATA_TFLAG_LBA && !(tf->flags & ATA_TFLAG_LBA48)) {
+#endif
+ if (!(tf->flags & ATA_TFLAG_LBA48)) {
+ /* A small (28b) LBA will fit in the 32b info field */
+ sb[0] |= 0x80; /* set valid bit */
+ sb[3] = tf->device & 0x0f;
+ sb[4] = tf->lbah;
+ sb[5] = tf->lbam;
+ sb[6] = tf->lbal;
}
}
static int ata_scsi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
{
struct scsi_cmnd *cmd = qc->scsicmd;
+ int need_sense = drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ);
+
+ /* For ATA pass thru (SAT) commands, generate a sense block if
+ * user mandated it or if there's an error. Note that if we
+ * generate because the user forced us to, a check condition
+ * is generated and the ATA register values are returned
+ * whether the command completed successfully or not. If there
+ * was no error, SK, ASC and ASCQ will all be zero.
+ */
+ if (((cmd->cmnd[0] == ATA_16) || (cmd->cmnd[0] == ATA_12)) &&
+ ((cmd->cmnd[2] & 0x20) || need_sense)) {
+ ata_gen_ata_desc_sense(qc);
+ } else {
+ if (!need_sense) {
+ cmd->result = SAM_STAT_GOOD;
+ } else {
+ /* TODO: decide which descriptor format to use
+ * for 48b LBA devices and call that here
+ * instead of the fixed desc, which is only
+ * good for smaller LBA (and maybe CHS?)
+ * devices.
+ */
+ ata_gen_fixed_sense(qc);
+ }
+ }
- if (unlikely(drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ)))
- ata_to_sense_error(qc, drv_stat);
- else
- cmd->result = SAM_STAT_GOOD;
+ if (need_sense) {
+ /* The ata_gen_..._sense routines fill in tf */
+ ata_dump_status(qc->ap->id, &qc->tf);
+ }
qc->scsidone(cmd);
if (xlat_func(qc, scsicmd))
goto err_out;
-
/* select device, send command to hardware */
if (ata_qc_issue(qc))
goto err_out;
return dev;
}
+/*
+ * ata_scsi_map_proto - Map pass-thru protocol value to taskfile value.
+ * @byte1: Byte 1 from pass-thru CDB.
+ *
+ * RETURNS:
+ * ATA_PROT_UNKNOWN if mapping failed/unimplemented, protocol otherwise.
+ */
+static u8
+ata_scsi_map_proto(u8 byte1)
+{
+ switch((byte1 & 0x1e) >> 1) {
+ case 3: /* Non-data */
+ return ATA_PROT_NODATA;
+
+ case 6: /* DMA */
+ return ATA_PROT_DMA;
+
+ case 4: /* PIO Data-in */
+ case 5: /* PIO Data-out */
+ if (byte1 & 0xe0) {
+ return ATA_PROT_PIO_MULT;
+ }
+ return ATA_PROT_PIO;
+
+ case 10: /* Device Reset */
+ case 0: /* Hard Reset */
+ case 1: /* SRST */
+ case 2: /* Bus Idle */
+ case 7: /* Packet */
+ case 8: /* DMA Queued */
+ case 9: /* Device Diagnostic */
+ case 11: /* UDMA Data-in */
+ case 12: /* UDMA Data-Out */
+ case 13: /* FPDMA */
+ default: /* Reserved */
+ break;
+ }
+
+ return ATA_PROT_UNKNOWN;
+}
+
+/**
+ * ata_scsi_pass_thru - convert ATA pass-thru CDB to taskfile
+ * @qc: command structure to be initialized
+ * @cmd: SCSI command to convert
+ *
+ * Handles either 12 or 16-byte versions of the CDB.
+ *
+ * RETURNS:
+ * Zero on success, non-zero on failure.
+ */
+static unsigned int
+ata_scsi_pass_thru(struct ata_queued_cmd *qc, u8 *scsicmd)
+{
+ struct ata_taskfile *tf = &(qc->tf);
+ struct scsi_cmnd *cmd = qc->scsicmd;
+
+ if ((tf->protocol = ata_scsi_map_proto(scsicmd[1])) == ATA_PROT_UNKNOWN)
+ return 1;
+
+ /*
+ * 12 and 16 byte CDBs use different offsets to
+ * provide the various register values.
+ */
+ if (scsicmd[0] == ATA_16) {
+ /*
+ * 16-byte CDB - may contain extended commands.
+ *
+ * If that is the case, copy the upper byte register values.
+ */
+ if (scsicmd[1] & 0x01) {
+ tf->hob_feature = scsicmd[3];
+ tf->hob_nsect = scsicmd[5];
+ tf->hob_lbal = scsicmd[7];
+ tf->hob_lbam = scsicmd[9];
+ tf->hob_lbah = scsicmd[11];
+ tf->flags |= ATA_TFLAG_LBA48;
+ } else
+ tf->flags &= ~ATA_TFLAG_LBA48;
+
+ /*
+ * Always copy low byte, device and command registers.
+ */
+ tf->feature = scsicmd[4];
+ tf->nsect = scsicmd[6];
+ tf->lbal = scsicmd[8];
+ tf->lbam = scsicmd[10];
+ tf->lbah = scsicmd[12];
+ tf->device = scsicmd[13];
+ tf->command = scsicmd[14];
+ } else {
+ /*
+ * 12-byte CDB - incapable of extended commands.
+ */
+ tf->flags &= ~ATA_TFLAG_LBA48;
+
+ tf->feature = scsicmd[3];
+ tf->nsect = scsicmd[4];
+ tf->lbal = scsicmd[5];
+ tf->lbam = scsicmd[6];
+ tf->lbah = scsicmd[7];
+ tf->device = scsicmd[8];
+ tf->command = scsicmd[9];
+ }
+
+ /*
+ * Filter SET_FEATURES - XFER MODE command -- otherwise,
+ * SET_FEATURES - XFER MODE must be preceded/succeeded
+ * by an update to hardware-specific registers for each
+ * controller (i.e. the reason for ->set_piomode(),
+ * ->set_dmamode(), and ->post_set_mode() hooks).
+ */
+ if ((tf->command == ATA_CMD_SET_FEATURES)
+ && (tf->feature == SETFEATURES_XFER))
+ return 1;
+
+ /*
+ * Set flags so that all registers will be written,
+ * and pass on write indication (used for PIO/DMA
+ * setup.)
+ */
+ tf->flags |= (ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE);
+
+ if (cmd->sc_data_direction == DMA_TO_DEVICE)
+ tf->flags |= ATA_TFLAG_WRITE;
+
+ /*
+ * Set transfer length.
+ *
+ * TODO: find out if we need to do more here to
+ * cover scatter/gather case.
+ */
+ qc->nsect = cmd->bufflen / ATA_SECT_SIZE;
+
+ return 0;
+}
+
/**
* ata_get_xlat_func - check if SCSI to ATA translation is possible
* @dev: ATA device
case VERIFY:
case VERIFY_16:
return ata_scsi_verify_xlat;
+
+ case ATA_12:
+ case ATA_16:
+ return ata_scsi_pass_thru;
+
case START_STOP:
return ata_scsi_start_stop_xlat;
}
ata_scsi_rbuf_fill(&args, ata_scsiop_report_luns);
break;
- /* mandantory commands we haven't implemented yet */
+ /* mandatory commands we haven't implemented yet */
case REQUEST_SENSE:
/* all other commands */
git.samba.org / sfrench / cifs-2.6.git / commitdiff