i2c-eg20t: Rework pch_i2c_wait_for_bus_idle to reduce wait time

If you insert several i2c transfers, the driver might start the next one
while the STOP bit of the previous transfer is still on the bus, marking
the bus as busy.
pch_i2c_wait_for_bus_idle does an msleep(20) delaying the next transfer
by >=20ms. Reduce wait time by actively waiting 5 us once, then using
usleep_range.

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Acked-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>

diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c
index ca8877641040284e4eb7964c9abe63a7e2d4a11d..1eb60ca055a3945f2ab80055881068b012a6c308 100644 (file)
--- a/drivers/i2c/busses/i2c-eg20t.c
+++ b/drivers/i2c/busses/i2c-eg20t.c
@@ -271,30 +271,36 @@ static inline bool ktime_lt(const ktime_t cmp1, const ktime_t cmp2)
 /**
  * pch_i2c_wait_for_bus_idle() - check the status of bus.
  * @adap:      Pointer to struct i2c_algo_pch_data.
- * @timeout:   waiting time counter (us).
+ * @timeout:   waiting time counter (ms).
  */
 static s32 pch_i2c_wait_for_bus_idle(struct i2c_algo_pch_data *adap,
                                     s32 timeout)
 {
        void __iomem *p = adap->pch_base_address;
-       ktime_t ns_val;
+       int schedule = 0;
+       unsigned long end = jiffies + msecs_to_jiffies(timeout);
+
+       while (ioread32(p + PCH_I2CSR) & I2CMBB_BIT) {
+               if (time_after(jiffies, end)) {
+                       pch_dbg(adap, "I2CSR = %x\n", ioread32(p + PCH_I2CSR));
+                       pch_err(adap, "%s: Timeout Error.return%d\n",
+                                       __func__, -ETIME);
+                       pch_i2c_init(adap);
 
-       if ((ioread32(p + PCH_I2CSR) & I2CMBB_BIT) == 0)
-               return 0;
+                       return -ETIME;
+               }
 
-       /* MAX timeout value is timeout*1000*1000nsec */
-       ns_val = ktime_add_ns(ktime_get(), timeout*1000*1000);
-       do {
-               msleep(20);
-               if ((ioread32(p + PCH_I2CSR) & I2CMBB_BIT) == 0)
-                       return 0;
-       } while (ktime_lt(ktime_get(), ns_val));
+               if (!schedule)
+                       /* Retry after some usecs */
+                       udelay(5);
+               else
+                       /* Wait a bit more without consuming CPU */
+                       usleep_range(20, 1000);
 
-       pch_dbg(adap, "I2CSR = %x\n", ioread32(p + PCH_I2CSR));
-       pch_err(adap, "%s: Timeout Error.return%d\n", __func__, -ETIME);
-       pch_i2c_init(adap);
+               schedule = 1;
+       }
 
-       return -ETIME;
+       return 0;
 }
 
 /**