clk: RK808: add clkout driver for RK808

This is the initial version of the RK808 PMIC.  This is a power management
IC for multimedia products.  It provides regulators that are able to
supply power to processor cores and other components.  The chip provides
other modules including RTC, Clockout.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Samuel Ortiz <sameo@linux.intel.com> says:
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Olof Johansson <olof@lixom.net>
Cc: Dmitry Torokhov <dtor@chromium.org>
Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index cfd3af7b2cbd16cec12c23cf0767cc787c66a812..84e0590e31dc754fd1562d8bd99d2c3273090f3f 100644 (file)
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -38,6 +38,15 @@ config COMMON_CLK_MAX77686
        ---help---
          This driver supports Maxim 77686 crystal oscillator clock. 
 
+config COMMON_CLK_RK808
+       tristate "Clock driver for RK808"
+       depends on MFD_RK808
+       ---help---
+         This driver supports RK808 crystal oscillator clock. These
+         multi-function devices have two fixed-rate oscillators,
+         clocked at 32KHz each. Clkout1 is always on, Clkout2 can off
+         by control register.
+
 config COMMON_CLK_SI5351
        tristate "Clock driver for SiLabs 5351A/B/C"
        depends on I2C

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index f537a0b1f798159824aa1d90ffd4378d1bff908d..99f53d5f876618be908525c3cbc4b9c3803119a2 100644 (file)
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_ARCH_NOMADIK)            += clk-nomadik.o
 obj-$(CONFIG_ARCH_NSPIRE)              += clk-nspire.o
 obj-$(CONFIG_COMMON_CLK_PALMAS)                += clk-palmas.o
 obj-$(CONFIG_CLK_PPC_CORENET)          += clk-ppc-corenet.o
+obj-$(CONFIG_COMMON_CLK_RK808)         += clk-rk808.o
 obj-$(CONFIG_COMMON_CLK_S2MPS11)       += clk-s2mps11.o
 obj-$(CONFIG_COMMON_CLK_SI5351)                += clk-si5351.o
 obj-$(CONFIG_COMMON_CLK_SI570)         += clk-si570.o

diff --git a/drivers/clk/clk-rk808.c b/drivers/clk/clk-rk808.c
new file mode 100644 (file)
index 0000000..83902b9
--- /dev/null
+++ b/drivers/clk/clk-rk808.c
@@ -0,0 +1,170 @@
+/*
+ * Clkout driver for Rockchip RK808
+ *
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * Author:Chris Zhong <zyw@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/rk808.h>
+#include <linux/i2c.h>
+
+#define RK808_NR_OUTPUT 2
+
+struct rk808_clkout {
+       struct rk808 *rk808;
+       struct clk_onecell_data clk_data;
+       struct clk_hw           clkout1_hw;
+       struct clk_hw           clkout2_hw;
+};
+
+static unsigned long rk808_clkout_recalc_rate(struct clk_hw *hw,
+                                             unsigned long parent_rate)
+{
+       return 32768;
+}
+
+static int rk808_clkout2_enable(struct clk_hw *hw, bool enable)
+{
+       struct rk808_clkout *rk808_clkout = container_of(hw,
+                                                        struct rk808_clkout,
+                                                        clkout2_hw);
+       struct rk808 *rk808 = rk808_clkout->rk808;
+
+       return regmap_update_bits(rk808->regmap, RK808_CLK32OUT_REG,
+                                 CLK32KOUT2_EN, enable ? CLK32KOUT2_EN : 0);
+}
+
+static int rk808_clkout2_prepare(struct clk_hw *hw)
+{
+       return rk808_clkout2_enable(hw, true);
+}
+
+static void rk808_clkout2_unprepare(struct clk_hw *hw)
+{
+       rk808_clkout2_enable(hw, false);
+}
+
+static int rk808_clkout2_is_prepared(struct clk_hw *hw)
+{
+       struct rk808_clkout *rk808_clkout = container_of(hw,
+                                                        struct rk808_clkout,
+                                                        clkout2_hw);
+       struct rk808 *rk808 = rk808_clkout->rk808;
+       uint32_t val;
+
+       int ret = regmap_read(rk808->regmap, RK808_CLK32OUT_REG, &val);
+
+       if (ret < 0)
+               return ret;
+
+       return (val & CLK32KOUT2_EN) ? 1 : 0;
+}
+
+static const struct clk_ops rk808_clkout1_ops = {
+       .recalc_rate = rk808_clkout_recalc_rate,
+};
+
+static const struct clk_ops rk808_clkout2_ops = {
+       .prepare = rk808_clkout2_prepare,
+       .unprepare = rk808_clkout2_unprepare,
+       .is_prepared = rk808_clkout2_is_prepared,
+       .recalc_rate = rk808_clkout_recalc_rate,
+};
+
+static int rk808_clkout_probe(struct platform_device *pdev)
+{
+       struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
+       struct i2c_client *client = rk808->i2c;
+       struct device_node *node = client->dev.of_node;
+       struct clk_init_data init = {};
+       struct clk **clk_table;
+       struct rk808_clkout *rk808_clkout;
+
+       rk808_clkout = devm_kzalloc(&client->dev,
+                                   sizeof(*rk808_clkout), GFP_KERNEL);
+       if (!rk808_clkout)
+               return -ENOMEM;
+
+       rk808_clkout->rk808 = rk808;
+
+       clk_table = devm_kcalloc(&client->dev, RK808_NR_OUTPUT,
+                                sizeof(struct clk *), GFP_KERNEL);
+       if (!clk_table)
+               return -ENOMEM;
+
+       init.flags = CLK_IS_ROOT;
+       init.parent_names = NULL;
+       init.num_parents = 0;
+       init.name = "rk808-clkout1";
+       init.ops = &rk808_clkout1_ops;
+       rk808_clkout->clkout1_hw.init = &init;
+
+       /* optional override of the clockname */
+       of_property_read_string_index(node, "clock-output-names",
+                                     0, &init.name);
+
+       clk_table[0] = devm_clk_register(&client->dev,
+                                        &rk808_clkout->clkout1_hw);
+       if (IS_ERR(clk_table[0]))
+               return PTR_ERR(clk_table[0]);
+
+       init.name = "rk808-clkout2";
+       init.ops = &rk808_clkout2_ops;
+       rk808_clkout->clkout2_hw.init = &init;
+
+       /* optional override of the clockname */
+       of_property_read_string_index(node, "clock-output-names",
+                                     1, &init.name);
+
+       clk_table[1] = devm_clk_register(&client->dev,
+                                        &rk808_clkout->clkout2_hw);
+       if (IS_ERR(clk_table[1]))
+               return PTR_ERR(clk_table[1]);
+
+       rk808_clkout->clk_data.clks = clk_table;
+       rk808_clkout->clk_data.clk_num = RK808_NR_OUTPUT;
+
+       return of_clk_add_provider(node, of_clk_src_onecell_get,
+                                  &rk808_clkout->clk_data);
+}
+
+static int rk808_clkout_remove(struct platform_device *pdev)
+{
+       struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
+       struct i2c_client *client = rk808->i2c;
+       struct device_node *node = client->dev.of_node;
+
+       of_clk_del_provider(node);
+
+       return 0;
+}
+
+static struct platform_driver rk808_clkout_driver = {
+       .probe = rk808_clkout_probe,
+       .remove = rk808_clkout_remove,
+       .driver         = {
+               .name   = "rk808-clkout",
+       },
+};
+
+module_platform_driver(rk808_clkout_driver);
+
+MODULE_DESCRIPTION("Clkout driver for the rk808 series PMICs");
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:rk808-clkout");