serial: sh-sci: Fix up the cpufreq notifier to use the proper port clock.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 231f77b16492d3ce5a16d56752d31f17a87fb45c..2cbefd2ca522f096c22e3d032f6f847f335675cb 100644 (file)
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -748,7 +748,7 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
        return ret;
 }
 
-#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_HAVE_CLK)
+#ifdef CONFIG_HAVE_CLK
 /*
  * Here we define a transistion notifier so that we can update all of our
  * ports' baud rate when the peripheral clock changes.
@@ -756,41 +756,20 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 static int sci_notifier(struct notifier_block *self,
                        unsigned long phase, void *p)
 {
-       struct cpufreq_freqs *freqs = p;
        int i;
 
        if ((phase == CPUFREQ_POSTCHANGE) ||
-           (phase == CPUFREQ_RESUMECHANGE)) {
+           (phase == CPUFREQ_RESUMECHANGE))
                for (i = 0; i < SCI_NPORTS; i++) {
-                       struct uart_port *port = &sci_ports[i].port;
-                       struct clk *clk;
-
-                       /*
-                        * Update the uartclk per-port if frequency has
-                        * changed, since it will no longer necessarily be
-                        * consistent with the old frequency.
-                        *
-                        * Really we want to be able to do something like
-                        * uart_change_speed() or something along those lines
-                        * here to implicitly reset the per-port baud rate..
-                        *
-                        * Clean this up later..
-                        */
-                       clk = clk_get(NULL, "module_clk");
-                       port->uartclk = clk_get_rate(clk);
-                       clk_put(clk);
+                       struct sci_port *s = &sci_ports[i];
+                       s->port.uartclk = clk_get_rate(s->clk);
                }
 
-               printk(KERN_INFO "%s: got a postchange notification "
-                      "for cpu %d (old %d, new %d)\n",
-                      __func__, freqs->cpu, freqs->old, freqs->new);
-       }
-
        return NOTIFY_OK;
 }
 
 static struct notifier_block sci_nb = { &sci_notifier, NULL, 0 };
-#endif /* CONFIG_CPU_FREQ && CONFIG_HAVE_CLK */
+#endif
 
 static int sci_request_irq(struct sci_port *port)
 {
@@ -1326,9 +1305,8 @@ static int __devinit sci_probe(struct platform_device *dev)
                uart_add_one_port(&sci_uart_driver, &sciport->port);
        }
 
-#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_HAVE_CLK)
+#ifdef CONFIG_HAVE_CLK
        cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
-       dev_info(&dev->dev, "CPU frequency notifier registered\n");
 #endif
 
 #ifdef CONFIG_SH_STANDARD_BIOS
@@ -1348,6 +1326,10 @@ static int __devexit sci_remove(struct platform_device *dev)
 {
        int i;
 
+#ifdef CONFIG_HAVE_CLK
+       cpufreq_unregister_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
+#endif
+
        for (i = 0; i < SCI_NPORTS; i++)
                uart_remove_one_port(&sci_uart_driver, &sci_ports[i].port);