X-Git-Url: http://git.samba.org/samba.git/?p=sfrench%2Fcifs-2.6.git;a=blobdiff_plain;f=drivers%2Fmtd%2Fnand%2FKconfig;h=4a3c6759492b95b4a18150c0f63003f9e2ee211c;hp=f1d60b6f048e6f08aa855e19fed1337a292cfe79;hb=0afc2edfada50980bec999f94dcea26ebad3dda6;hpb=0b662c64840fb281e5948ab6f9d60f84817277d0

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index f1d60b6f048e..4a3c6759492b 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -91,6 +91,25 @@ config MTD_NAND_AU1550
 	  This enables the driver for the NAND flash controller on the
 	  AMD/Alchemy 1550 SOC.
 
+config MTD_NAND_BF5XX
+	tristate "Blackfin on-chip NAND Flash Controller driver"
+	depends on (BF54x || BF52x) && MTD_NAND
+	help
+	  This enables the Blackfin on-chip NAND flash controller
+
+	  No board specific support is done by this driver, each board
+	  must advertise a platform_device for the driver to attach.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called bf5xx-nand.
+
+config MTD_NAND_BF5XX_HWECC
+	bool "BF5XX NAND Hardware ECC"
+	depends on MTD_NAND_BF5XX
+	help
+	  Enable the use of the BF5XX's internal ECC generator when
+	  using NAND.
+
 config MTD_NAND_RTC_FROM4
 	tristate "Renesas Flash ROM 4-slot interface board (FROM_BOARD4)"
 	depends on SH_SOLUTION_ENGINE
@@ -134,10 +153,10 @@ config MTD_NAND_S3C2410_HWECC
 
 config MTD_NAND_NDFC
 	tristate "NDFC NanD Flash Controller"
-	depends on 44x
+	depends on 4xx && !PPC_MERGE
 	select MTD_NAND_ECC_SMC
 	help
-	 NDFC Nand Flash Controllers are integrated in EP44x SoCs
+	 NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs
 
 config MTD_NAND_S3C2410_CLKSTOP
 	bool "S3C2410 NAND IDLE clock stop"
@@ -237,7 +256,7 @@ config MTD_NAND_CAFE
 	select REED_SOLOMON
 	select REED_SOLOMON_DEC16
 	help
-	  Use NAND flash attached to the CAFÉ chip designed for the $100
+	  Use NAND flash attached to the CAFÉ chip designed for the OLPC
 	  laptop.
 
 config MTD_NAND_CS553X
@@ -264,6 +283,12 @@ config MTD_NAND_CM_X270
 	tristate "Support for NAND Flash on CM-X270 modules"
 	depends on MTD_NAND && MACH_ARMCORE
 
+config MTD_NAND_PASEMI
+	tristate "NAND support for PA Semi PWRficient"
+	depends on MTD_NAND && PPC_PASEMI
+	help
+	  Enables support for NAND Flash interface on PA Semi PWRficient
+	  based boards
 
 config MTD_NAND_NANDSIM
 	tristate "Support for NAND Flash Simulator"
@@ -280,5 +305,29 @@ config MTD_NAND_PLATFORM
 	  devices. You will need to provide platform-specific functions
 	  via platform_data.
 
+config MTD_ALAUDA
+	tristate "MTD driver for Olympus MAUSB-10 and Fujifilm DPC-R1"
+	depends on MTD_NAND && USB
+	help
+	  These two (and possibly other) Alauda-based cardreaders for
+	  SmartMedia and xD allow raw flash access.
+
+config MTD_NAND_ORION
+	tristate "NAND Flash support for Marvell Orion SoC"
+	depends on ARCH_ORION && MTD_NAND
+	help
+	  This enables the NAND flash controller on Orion machines.
+
+	  No board specific support is done by this driver, each board
+	  must advertise a platform_device for the driver to attach.
+
+config MTD_NAND_FSL_ELBC
+	tristate "NAND support for Freescale eLBC controllers"
+	depends on MTD_NAND && PPC_OF
+	help
+	  Various Freescale chips, including the 8313, include a NAND Flash
+	  Controller Module with built-in hardware ECC capabilities.
+	  Enabling this option will enable you to use this to control
+	  external NAND devices.
 
 endif # MTD_NAND