X-Git-Url: http://git.samba.org/samba.git/?p=sfrench%2Fcifs-2.6.git;a=blobdiff_plain;f=drivers%2Fata%2Fpata_jmicron.c;h=5b8174d940670493e5439ab2338276c5b1b4de31;hp=4d67f238eee25ddf5f0e6ee917f7b8b0141de9b3;hb=cc1bf182bb8451a036a7c227f0a95a0416c4736e;hpb=64b853aa328f34dd58e4e617cded91e2ddbcac13

diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 4d67f238eee2..5b8174d94067 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -29,7 +29,7 @@ typedef enum {
 
 /**
  *	jmicron_pre_reset	-	check for 40/80 pin
- *	@ap: Port
+ *	@link: ATA link
  *	@deadline: deadline jiffies for the operation
  *
  *	Perform the PATA port setup we need.
@@ -39,9 +39,9 @@ typedef enum {
  *	and setup here. We assume that has been done by init_one and the
  *	BIOS.
  */
-
-static int jmicron_pre_reset(struct ata_port *ap, unsigned long deadline)
+static int jmicron_pre_reset(struct ata_link *link, unsigned long deadline)
 {
+	struct ata_port *ap = link->ap;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	u32 control;
 	u32 control5;
@@ -80,11 +80,10 @@ static int jmicron_pre_reset(struct ata_port *ap, unsigned long deadline)
 	 *	actually do our cable checking etc. Thankfully we don't need
 	 *	to do the plumbing for other cases.
 	 */
-	switch (port_map[port])
-	{
+	switch (port_map[port]) {
 	case PORT_PATA0:
-		if (control & (1 << 5))
-			return 0;
+		if ((control & (1 << 5)) == 0)
+			return -ENOENT;
 		if (control & (1 << 3))	/* 40/80 pin primary */
 			ap->cbl = ATA_CBL_PATA40;
 		else
@@ -93,7 +92,7 @@ static int jmicron_pre_reset(struct ata_port *ap, unsigned long deadline)
 	case PORT_PATA1:
 		/* Bit 21 is set if the port is enabled */
 		if ((control5 & (1 << 21)) == 0)
-			return 0;
+			return -ENOENT;
 		if (control5 & (1 << 19))	/* 40/80 pin secondary */
 			ap->cbl = ATA_CBL_PATA40;
 		else
@@ -103,7 +102,7 @@ static int jmicron_pre_reset(struct ata_port *ap, unsigned long deadline)
 		ap->cbl = ATA_CBL_SATA;
 		break;
 	}
-	return ata_std_prereset(ap, deadline);
+	return ata_std_prereset(link, deadline);
 }
 
 /**
@@ -141,8 +140,6 @@ static struct scsi_host_template jmicron_sht = {
 };
 
 static const struct ata_port_operations jmicron_ops = {
-	.port_disable		= ata_port_disable,
-
 	/* Task file is PCI ATA format, use helpers */
 	.tf_load		= ata_tf_load,
 	.tf_read		= ata_tf_read,
@@ -168,7 +165,6 @@ static const struct ata_port_operations jmicron_ops = {
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
-	.irq_ack		= ata_irq_ack,
 
 	/* Generic PATA PCI ATA helpers */
 	.port_start		= ata_port_start,
@@ -207,17 +203,8 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i
 }
 
 static const struct pci_device_id jmicron_pci_tbl[] = {
-	{ PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361,
-	  PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 361 },
-	{ PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363,
-	  PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 363 },
-	{ PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365,
-	  PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 365 },
-	{ PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366,
-	  PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 366 },
-	{ PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368,
-	  PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 368 },
-
+	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+	  PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 0 },
 	{ }	/* terminate list */
 };