X-Git-Url: http://git.samba.org/samba.git/?p=sfrench%2Fcifs-2.6.git;a=blobdiff_plain;f=arch%2Fx86%2Fkernel%2Facpi%2Fboot.c;h=d2a58431a074b3f6282b58489635076878bdf2d3;hp=afd2afe9102d33e26d8c837333ca4115215d578b;hb=f3191248bf1bf6627c04c5624904df45e0a979ed;hpb=f4921aff5b174349bc36551f142a5dbac782ea3f

diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index afd2afe9102d..d2a58431a074 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -99,7 +99,7 @@ static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
 
 /*
  * The default interrupt routing model is PIC (8259).  This gets
- * overriden if IOAPICs are enumerated (below).
+ * overridden if IOAPICs are enumerated (below).
  */
 enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC;
 
@@ -414,8 +414,8 @@ acpi_parse_nmi_src(struct acpi_subtable_header * header, const unsigned long end
  *
  * Port 0x4d0-4d1 are ECLR1 and ECLR2, the Edge/Level Control Registers
  * for the 8259 PIC.  bit[n] = 1 means irq[n] is Level, otherwise Edge.
- * ECLR1 is IRQ's 0-7 (IRQ 0, 1, 2 must be 0)
- * ECLR2 is IRQ's 8-15 (IRQ 8, 13 must be 0)
+ * ECLR1 is IRQs 0-7 (IRQ 0, 1, 2 must be 0)
+ * ECLR2 is IRQs 8-15 (IRQ 8, 13 must be 0)
  */
 
 void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger)
@@ -427,7 +427,7 @@ void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger)
 	old = inb(0x4d0) | (inb(0x4d1) << 8);
 
 	/*
-	 * If we use ACPI to set PCI irq's, then we should clear ELCR
+	 * If we use ACPI to set PCI IRQs, then we should clear ELCR
 	 * since we will set it correctly as we enable the PCI irq
 	 * routing.
 	 */
@@ -496,7 +496,8 @@ EXPORT_SYMBOL(acpi_register_gsi);
  *  ACPI based hotplug support for CPU
  */
 #ifdef CONFIG_ACPI_HOTPLUG_CPU
-int acpi_map_lsapic(acpi_handle handle, int *pcpu)
+
+static int __cpuinit _acpi_map_lsapic(acpi_handle handle, int *pcpu)
 {
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 	union acpi_object *obj;
@@ -551,11 +552,16 @@ int acpi_map_lsapic(acpi_handle handle, int *pcpu)
 	return 0;
 }
 
+/* wrapper to silence section mismatch warning */
+int __ref acpi_map_lsapic(acpi_handle handle, int *pcpu)
+{
+	return _acpi_map_lsapic(handle, pcpu);
+}
 EXPORT_SYMBOL(acpi_map_lsapic);
 
 int acpi_unmap_lsapic(int cpu)
 {
-	x86_cpu_to_apicid[cpu] = -1;
+	per_cpu(x86_cpu_to_apicid, cpu) = -1;
 	cpu_clear(cpu, cpu_present_map);
 	num_processors--;
 
@@ -637,6 +643,38 @@ static int __init acpi_parse_hpet(struct acpi_table_header *table)
 	}
 
 	hpet_address = hpet_tbl->address.address;
+
+	/*
+	 * Some broken BIOSes advertise HPET at 0x0. We really do not
+	 * want to allocate a resource there.
+	 */
+	if (!hpet_address) {
+		printk(KERN_WARNING PREFIX
+		       "HPET id: %#x base: %#lx is invalid\n",
+		       hpet_tbl->id, hpet_address);
+		return 0;
+	}
+#ifdef CONFIG_X86_64
+	/*
+	 * Some even more broken BIOSes advertise HPET at
+	 * 0xfed0000000000000 instead of 0xfed00000. Fix it up and add
+	 * some noise:
+	 */
+	if (hpet_address == 0xfed0000000000000UL) {
+		if (!hpet_force_user) {
+			printk(KERN_WARNING PREFIX "HPET id: %#x "
+			       "base: 0xfed0000000000000 is bogus\n "
+			       "try hpet=force on the kernel command line to "
+			       "fix it up to 0xfed00000.\n", hpet_tbl->id);
+			hpet_address = 0;
+			return 0;
+		}
+		printk(KERN_WARNING PREFIX
+		       "HPET id: %#x base: 0xfed0000000000000 fixed up "
+		       "to 0xfed00000.\n", hpet_tbl->id);
+		hpet_address >>= 32;
+	}
+#endif
 	printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n",
 	       hpet_tbl->id, hpet_address);