X-Git-Url: http://git.samba.org/samba.git/?p=sfrench%2Fcifs-2.6.git;a=blobdiff_plain;f=Documentation%2Fsound%2Falsa%2FALSA-Configuration.txt;h=e985cf5e04107798a4f079260486a1793c061623;hp=4b48c2e82c3c1f340cf4cd7b4247d6d58941d162;hb=256ae6a720618cbbfacc5e62ea1fe7c129d1b644;hpb=347c53dca73fca317d57781f510f5ff4f6c0d0d7 diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 4b48c2e82c3c..e985cf5e0410 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -57,7 +57,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. - Default: 1 - For auto-loading more than one card, specify this option together with snd-card-X aliases. - + slots - Reserve the slot index for the given driver. + This option takes multiple strings. + See "Module Autoloading Support" section for details. Module snd-pcm-oss ------------------ @@ -148,13 +150,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module for sound cards based on Analog Devices AD1816A/AD1815 ISA chips. - port - port # for AD1816A chip (PnP setup) - mpu_port - port # for MPU-401 UART (PnP setup) - fm_port - port # for OPL3 (PnP setup) - irq - IRQ # for AD1816A chip (PnP setup) - mpu_irq - IRQ # for MPU-401 UART (PnP setup) - dma1 - first DMA # for AD1816A chip (PnP setup) - dma2 - second DMA # for AD1816A chip (PnP setup) clockfreq - Clock frequency for AD1816A chip (default = 0, 33000Hz) This module supports multiple cards, autoprobe and PnP. @@ -201,14 +196,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module for sound cards based on Avance Logic ALS100/ALS120 ISA chips. - port - port # for ALS100 (SB16) chip (PnP setup) - irq - IRQ # for ALS100 (SB16) chip (PnP setup) - dma8 - 8-bit DMA # for ALS100 (SB16) chip (PnP setup) - dma16 - 16-bit DMA # for ALS100 (SB16) chip (PnP setup) - mpu_port - port # for MPU-401 UART (PnP setup) - mpu_irq - IRQ # for MPU-401 (PnP setup) - fm_port - port # for OPL3 FM (PnP setup) - This module supports multiple cards, autoprobe and PnP. The power-management is supported. @@ -302,15 +289,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module for sound cards based on Aztech System AZT2320 ISA chip (PnP only). - port - port # for AZT2320 chip (PnP setup) - wss_port - port # for WSS (PnP setup) - mpu_port - port # for MPU-401 UART (PnP setup) - fm_port - FM port # for AZT2320 chip (PnP setup) - irq - IRQ # for AZT2320 (WSS) chip (PnP setup) - mpu_irq - IRQ # for MPU-401 UART (PnP setup) - dma1 - 1st DMA # for AZT2320 (WSS) chip (PnP setup) - dma2 - 2nd DMA # for AZT2320 (WSS) chip (PnP setup) - This module supports multiple cards, PnP and autoprobe. The power-management is supported. @@ -350,6 +328,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module for sound cards based on C-Media CMI8330 ISA chips. + isapnp - ISA PnP detection - 0 = disable, 1 = enable (default) + + with isapnp=0, the following options are available: + wssport - port # for CMI8330 chip (WSS) wssirq - IRQ # for CMI8330 chip (WSS) wssdma - first DMA # for CMI8330 chip (WSS) @@ -404,6 +386,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module for sound cards based on CS4232/CS4232A ISA chips. + isapnp - ISA PnP detection - 0 = disable, 1 = enable (default) + + with isapnp=0, the following options are available: + port - port # for CS4232 chip (PnP setup - 0x534) cport - control port # for CS4232 chip (PnP setup - 0x120,0x210,0xf00) mpu_port - port # for MPU-401 UART (PnP setup - 0x300), -1 = disable @@ -412,10 +398,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. mpu_irq - IRQ # for MPU-401 UART (9,11,12,15) dma1 - first DMA # for CS4232 chip (0,1,3) dma2 - second DMA # for Yamaha CS4232 chip (0,1,3), -1 = disable - isapnp - ISA PnP detection - 0 = disable, 1 = enable (default) This module supports multiple cards. This module does not support autoprobe - thus main port must be specified!!! Other ports are optional. + (if ISA PnP is not used) thus main port must be specified!!! Other ports are + optional. The power-management is supported. @@ -425,6 +411,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module for sound cards based on CS4235/CS4236/CS4236B/CS4237B/ CS4238B/CS4239 ISA chips. + isapnp - ISA PnP detection - 0 = disable, 1 = enable (default) + + with isapnp=0, the following options are available: + port - port # for CS4236 chip (PnP setup - 0x534) cport - control port # for CS4236 chip (PnP setup - 0x120,0x210,0xf00) mpu_port - port # for MPU-401 UART (PnP setup - 0x300), -1 = disable @@ -433,7 +423,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. mpu_irq - IRQ # for MPU-401 UART (9,11,12,15) dma1 - first DMA # for CS4236 chip (0,1,3) dma2 - second DMA # for CS4236 chip (0,1,3), -1 = disable - isapnp - ISA PnP detection - 0 = disable, 1 = enable (default) This module supports multiple cards. This module does not support autoprobe (if ISA PnP is not used) thus main port and control port must be @@ -503,13 +492,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module for Diamond Technologies DT-019X / Avance Logic ALS-007 (PnP only) - port - Port # (PnP setup) - mpu_port - Port # for MPU-401 (PnP setup) - fm_port - Port # for FM OPL-3 (PnP setup) - irq - IRQ # (PnP setup) - mpu_irq - IRQ # for MPU-401 (PnP setup) - dma8 - DMA # (PnP setup) - This module supports multiple cards. This module is enabled only with ISA PnP support. @@ -607,10 +589,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module for sound cards based on ESS ES968 chip (PnP only). - port - port # for ES968 (SB8) chip (PnP setup) - irq - IRQ # for ES968 (SB8) chip (PnP setup) - dma1 - DMA # for ES968 (SB8) chip (PnP setup) - This module supports multiple cards, PnP and autoprobe. The power-management is supported. @@ -633,13 +611,16 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module for ESS AudioDrive ES-18xx sound cards. + isapnp - ISA PnP detection - 0 = disable, 1 = enable (default) + + with isapnp=0, the following options are available: + port - port # for ES-18xx chip (0x220,0x240,0x260) mpu_port - port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default) fm_port - port # for FM (optional, not used) irq - IRQ # for ES-18xx chip (5,7,9,10) dma1 - first DMA # for ES-18xx chip (0,1,3) dma2 - first DMA # for ES-18xx chip (0,1,3) - isapnp - ISA PnP detection - 0 = disable, 1 = enable (default) This module supports multiple cards, ISA PnP and autoprobe (without MPU-401 port if native ISA PnP routines are not used). @@ -763,9 +744,12 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. VIA VT8251/VT8237A, SIS966, ULI M5461 + [Multiple options for each card instance] model - force the model name position_fix - Fix DMA pointer (0 = auto, 1 = none, 2 = POSBUF, 3 = FIFO size) probe_mask - Bitmask to probe codecs (default = -1, meaning all slots) + + [Single (global) options] single_cmd - Use single immediate commands to communicate with codecs (for debugging only) enable_msi - Enable Message Signaled Interrupt (MSI) (default = off) @@ -774,8 +758,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. power_save_controller - Reset HD-audio controller in power-saving mode (default = on) - This module supports one card and autoprobe. - + This module supports multiple cards and autoprobe. + Each codec may have a model table for different configurations. If your machine isn't listed there, the default (usually minimal) configuration is set up. You can pass "model=" option to @@ -817,17 +801,23 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. will Will laptops (PB V7900) replacer Replacer 672V basic fixed pin assignment (old default model) + test for testing/debugging purpose, almost all controls can + adjusted. Appearing only when compiled with + $CONFIG_SND_DEBUG=y auto auto-config reading BIOS (default) ALC262 fujitsu Fujitsu Laptop hp-bpc HP xw4400/6400/8400/9400 laptops hp-bpc-d7000 HP BPC D7000 + hp-tc-t5735 HP Thin Client T5735 + hp-rp5700 HP RP5700 benq Benq ED8 benq-t31 Benq T31 hippo Hippo (ATI) with jack detection, Sony UX-90s hippo_1 Hippo (Benq) with jack detection sony-assamd Sony ASSAMD + ultra Samsung Q1 Ultra Vista model basic fixed pin assignment w/o SPDIF auto auto-config reading BIOS (default) @@ -835,6 +825,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. 3stack 3-stack model toshiba Toshiba A205 acer Acer laptops + dell Dell OEM laptops (Vostro 1200) + test for testing/debugging purpose, almost all controls can + adjusted. Appearing only when compiled with + $CONFIG_SND_DEBUG=y auto auto-config reading BIOS (default) ALC662 @@ -843,6 +837,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. 3stack-6ch-dig 3-stack (6-channel) with SPDIF 6stack-dig 6-stack with SPDIF lenovo-101e Lenovo laptop + eeepc-p701 ASUS Eeepc P701 + eeepc-ep20 ASUS Eeepc EP20 auto auto-config reading BIOS (default) ALC882/885 @@ -877,6 +873,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. haier-w66 Haier W66 6stack-hp HP machines with 6stack (Nettle boards) 3stack-hp HP machines with 3stack (Lucknow, Samba boards) + 6stack-dell Dell machines with 6stack (Inspiron 530) + mitac Mitac 8252D auto auto-config reading BIOS (default) ALC861/660 @@ -928,6 +926,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. AD1984 basic default configuration thinkpad Lenovo Thinkpad T61/X61 + dell Dell T3400 AD1986A 6stack 6-jack, separate surrounds (default) @@ -947,7 +946,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. auto auto-config reading BIOS (default) Conexant 5045 - laptop Laptop config + laptop-hpsense Laptop with HP sense (old model laptop) + laptop-micsense Laptop with Mic sense (old model fujitsu) + laptop-hpmicsense Laptop with HP and Mic senses + benq Benq R55E test for testing/debugging purpose, almost all controls can be adjusted. Appearing only when compiled with $CONFIG_SND_DEBUG=y @@ -960,6 +962,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. can be adjusted. Appearing only when compiled with $CONFIG_SND_DEBUG=y + Conexant 5051 + laptop Basic Laptop config (default) + hp HP Spartan laptop + STAC9200 ref Reference board dell-d21 Dell (unknown) @@ -1091,6 +1097,15 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. See hdspm.txt for details. + Module snd-hifier + ----------------- + + Module for the MediaTek/TempoTec HiFier Fantasia sound card. + + This module supports autoprobe and multiple cards. + + Power management is _not_ supported. + Module snd-ice1712 ------------------ @@ -1156,11 +1171,14 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. * Chaintech 9CJS * Chaintech AV-710 * Shuttle SN25P + * Onkyo SE-90PCI + * Onkyo SE-200PCI model - Use the given board model, one of the following: revo51, revo71, amp2000, prodigy71, prodigy71lt, prodigy192, aureon51, aureon71, universe, ap192, - k8x800, phase22, phase28, ms300, av710 + k8x800, phase22, phase28, ms300, av710, se200pci, + se90pci This module supports multiple cards and autoprobe. @@ -1257,15 +1275,19 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module for Gravis UltraSound PnP, Dynasonic 3-D/Pro, STB Sound Rage 32 and other sound cards based on AMD InterWave (tm) chip. - port - port # for InterWave chip (0x210,0x220,0x230,0x240,0x250,0x260) - irq - IRQ # for InterWave chip (3,5,9,11,12,15) - dma1 - DMA # for InterWave chip (0,1,3,5,6,7) - dma2 - DMA # for InterWave chip (0,1,3,5,6,7,-1=disable) joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V) midi - 1 = MIDI UART enable, 0 = MIDI UART disable (default) pcm_voices - reserved PCM voices for the synthesizer (default 2) effect - 1 = InterWave effects enable (default 0); requires 8 voices + isapnp - ISA PnP detection - 0 = disable, 1 = enable (default) + + with isapnp=0, the following options are available: + + port - port # for InterWave chip (0x210,0x220,0x230,0x240,0x250,0x260) + irq - IRQ # for InterWave chip (3,5,9,11,12,15) + dma1 - DMA # for InterWave chip (0,1,3,5,6,7) + dma2 - DMA # for InterWave chip (0,1,3,5,6,7,-1=disable) This module supports multiple cards, autoprobe and ISA PnP. @@ -1276,16 +1298,20 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. and other sound cards based on AMD InterWave (tm) chip with TEA6330T circuit for extended control of bass, treble and master volume. - port - port # for InterWave chip (0x210,0x220,0x230,0x240,0x250,0x260) - port_tc - tone control (i2c bus) port # for TEA6330T chip (0x350,0x360,0x370,0x380) - irq - IRQ # for InterWave chip (3,5,9,11,12,15) - dma1 - DMA # for InterWave chip (0,1,3,5,6,7) - dma2 - DMA # for InterWave chip (0,1,3,5,6,7,-1=disable) joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V) midi - 1 = MIDI UART enable, 0 = MIDI UART disable (default) pcm_voices - reserved PCM voices for the synthesizer (default 2) effect - 1 = InterWave effects enable (default 0); requires 8 voices + isapnp - ISA PnP detection - 0 = disable, 1 = enable (default) + + with isapnp=0, the following options are available: + + port - port # for InterWave chip (0x210,0x220,0x230,0x240,0x250,0x260) + port_tc - tone control (i2c bus) port # for TEA6330T chip (0x350,0x360,0x370,0x380) + irq - IRQ # for InterWave chip (3,5,9,11,12,15) + dma1 - DMA # for InterWave chip (0,1,3,5,6,7) + dma2 - DMA # for InterWave chip (0,1,3,5,6,7,-1=disable) This module supports multiple cards, autoprobe and ISA PnP. @@ -1473,6 +1499,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module for Yamaha OPL3-SA2/SA3 sound cards. + isapnp - ISA PnP detection - 0 = disable, 1 = enable (default) + + with isapnp=0, the following options are available: + port - control port # for OPL3-SA chip (0x370) sb_port - SB port # for OPL3-SA chip (0x220,0x240) wss_port - WSS port # for OPL3-SA chip (0x530,0xe80,0xf40,0x604) @@ -1481,7 +1511,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. irq - IRQ # for OPL3-SA chip (5,7,9,10) dma1 - first DMA # for Yamaha OPL3-SA chip (0,1,3) dma2 - second DMA # for Yamaha OPL3-SA chip (0,1,3), -1 = disable - isapnp - ISA PnP detection - 0 = disable, 1 = enable (default) This module supports multiple cards and ISA PnP. It does not support autoprobe (if ISA PnP is not used) thus all ports must be specified!!! @@ -1494,6 +1523,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module for sound cards based on OPTi 82c92x and Analog Devices AD1848 chips. Module works with OAK Mozart cards as well. + isapnp - ISA PnP detection - 0 = disable, 1 = enable (default) + + with isapnp=0, the following options are available: + port - port # for WSS chip (0x530,0xe80,0xf40,0x604) mpu_port - port # for MPU-401 UART (0x300,0x310,0x320,0x330) fm_port - port # for OPL3 device (0x388) @@ -1508,6 +1541,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module for sound cards based on OPTi 82c92x and Crystal CS4231 chips. + isapnp - ISA PnP detection - 0 = disable, 1 = enable (default) + + with isapnp=0, the following options are available: + port - port # for WSS chip (0x530,0xe80,0xf40,0x604) mpu_port - port # for MPU-401 UART (0x300,0x310,0x320,0x330) fm_port - port # for OPL3 device (0x388) @@ -1523,6 +1560,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module for sound cards based on OPTi 82c93x chips. + isapnp - ISA PnP detection - 0 = disable, 1 = enable (default) + + with isapnp=0, the following options are available: + port - port # for WSS chip (0x530,0xe80,0xf40,0x604) mpu_port - port # for MPU-401 UART (0x300,0x310,0x320,0x330) fm_port - port # for OPL3 device (0x388) @@ -1533,6 +1574,22 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. This module supports only one card, autoprobe and PnP. + Module snd-oxygen + ----------------- + + Module for sound cards based on the C-Media CMI8788 chip: + * Asound A-8788 + * AuzenTech X-Meridian + * Bgears b-Enspirer + * Club3D Theatron DTS + * HT-Omega Claro + * Razer Barracuda AC-1 + * Sondigo Inferno + + This module supports autoprobe and multiple cards. + + Power management is _not_ supported. + Module snd-pcxhr ---------------- @@ -1647,6 +1704,12 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. SoundBlaster AWE 32 (PnP), SoundBlaster AWE 64 PnP + mic_agc - Mic Auto-Gain-Control - 0 = disable, 1 = enable (default) + csp - ASP/CSP chip support - 0 = disable (default), 1 = enable + isapnp - ISA PnP detection - 0 = disable, 1 = enable (default) + + with isapnp=0, the following options are available: + port - port # for SB DSP 4.x chip (0x220,0x240,0x260) mpu_port - port # for MPU-401 UART (0x300,0x330), -1 = disable awe_port - base port # for EMU8000 synthesizer (0x620,0x640,0x660) @@ -1654,9 +1717,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. irq - IRQ # for SB DSP 4.x chip (5,7,9,10) dma8 - 8-bit DMA # for SB DSP 4.x chip (0,1,3) dma16 - 16-bit DMA # for SB DSP 4.x chip (5,6,7) - mic_agc - Mic Auto-Gain-Control - 0 = disable, 1 = enable (default) - csp - ASP/CSP chip support - 0 = disable (default), 1 = enable - isapnp - ISA PnP detection - 0 = disable, 1 = enable (default) This module supports multiple cards, autoprobe and ISA PnP. @@ -1739,18 +1799,21 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module for Turtle Beach Maui, Tropez and Tropez+ sound cards. + use_cs4232_midi - Use CS4232 MPU-401 interface + (inaccessibly located inside your computer) + isapnp - ISA PnP detection - 0 = disable, 1 = enable (default) + + with isapnp=0, the following options are available: + cs4232_pcm_port - Port # for CS4232 PCM interface. cs4232_pcm_irq - IRQ # for CS4232 PCM interface (5,7,9,11,12,15). cs4232_mpu_port - Port # for CS4232 MPU-401 interface. cs4232_mpu_irq - IRQ # for CS4232 MPU-401 interface (9,11,12,15). - use_cs4232_midi - Use CS4232 MPU-401 interface - (inaccessibly located inside your computer) ics2115_port - Port # for ICS2115 ics2115_irq - IRQ # for ICS2115 fm_port - FM OPL-3 Port # dma1 - DMA1 # for CS4232 PCM interface. dma2 - DMA2 # for CS4232 PCM interface. - isapnp - ISA PnP detection - 0 = disable, 1 = enable (default) The below are options for wavefront_synth features: wf_raw - Assume that we need to boot the OS (default:no) @@ -1965,6 +2028,16 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. This module supports multiple cards. + Module snd-virtuoso + ------------------- + + Module for sound cards based on the Asus AV200 chip, i.e., + Xonar D2 and Xonar D2X. + + This module supports autoprobe and multiple cards. + + Power management is _not_ supported. + Module snd-vx222 ---------------- @@ -2135,6 +2208,23 @@ alias sound-slot-1 snd-ens1371 In this example, the interwave card is always loaded as the first card (index 0) and ens1371 as the second (index 1). +Alternative (and new) way to fixate the slot assignment is to use +"slots" option of snd module. In the case above, specify like the +following: + +options snd slots=snd-interwave,snd-ens1371 + +Then, the first slot (#0) is reserved for snd-interwave driver, and +the second (#1) for snd-ens1371. You can omit index option in each +driver if slots option is used (although you can still have them at +the same time as long as they don't conflict). + +The slots option is especially useful for avoiding the possible +hot-plugging and the resultant slot conflict. For example, in the +case above again, the first two slots are already reserved. If any +other driver (e.g. snd-usb-audio) is loaded before snd-interwave or +snd-ens1371, it will be assigned to the third or later slot. + ALSA PCM devices to OSS devices mapping =======================================