#include <sound/pxa2xx-lib.h>
#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/dma.h>
#include <mach/regs-ssp.h>
#include <mach/audio.h>
#include <mach/ssp.h>
#endif
};
-#define PXA2xx_SSP1_BASE 0x41000000
-#define PXA27x_SSP2_BASE 0x41700000
-#define PXA27x_SSP3_BASE 0x41900000
-#define PXA3xx_SSP4_BASE 0x41a00000
-
-static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_mono_out = {
- .name = "SSP1 PCM Mono out",
- .dev_addr = PXA2xx_SSP1_BASE + SSDR,
- .drcmr = &DRCMR(14),
- .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
- DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_mono_in = {
- .name = "SSP1 PCM Mono in",
- .dev_addr = PXA2xx_SSP1_BASE + SSDR,
- .drcmr = &DRCMR(13),
- .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
- DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_stereo_out = {
- .name = "SSP1 PCM Stereo out",
- .dev_addr = PXA2xx_SSP1_BASE + SSDR,
- .drcmr = &DRCMR(14),
- .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
- DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_stereo_in = {
- .name = "SSP1 PCM Stereo in",
- .dev_addr = PXA2xx_SSP1_BASE + SSDR,
- .drcmr = &DRCMR(13),
- .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
- DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_mono_out = {
- .name = "SSP2 PCM Mono out",
- .dev_addr = PXA27x_SSP2_BASE + SSDR,
- .drcmr = &DRCMR(16),
- .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
- DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_mono_in = {
- .name = "SSP2 PCM Mono in",
- .dev_addr = PXA27x_SSP2_BASE + SSDR,
- .drcmr = &DRCMR(15),
- .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
- DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_stereo_out = {
- .name = "SSP2 PCM Stereo out",
- .dev_addr = PXA27x_SSP2_BASE + SSDR,
- .drcmr = &DRCMR(16),
- .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
- DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_stereo_in = {
- .name = "SSP2 PCM Stereo in",
- .dev_addr = PXA27x_SSP2_BASE + SSDR,
- .drcmr = &DRCMR(15),
- .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
- DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_mono_out = {
- .name = "SSP3 PCM Mono out",
- .dev_addr = PXA27x_SSP3_BASE + SSDR,
- .drcmr = &DRCMR(67),
- .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
- DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_mono_in = {
- .name = "SSP3 PCM Mono in",
- .dev_addr = PXA27x_SSP3_BASE + SSDR,
- .drcmr = &DRCMR(66),
- .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
- DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_stereo_out = {
- .name = "SSP3 PCM Stereo out",
- .dev_addr = PXA27x_SSP3_BASE + SSDR,
- .drcmr = &DRCMR(67),
- .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
- DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_stereo_in = {
- .name = "SSP3 PCM Stereo in",
- .dev_addr = PXA27x_SSP3_BASE + SSDR,
- .drcmr = &DRCMR(66),
- .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
- DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_mono_out = {
- .name = "SSP4 PCM Mono out",
- .dev_addr = PXA3xx_SSP4_BASE + SSDR,
- .drcmr = &DRCMR(67),
- .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
- DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_mono_in = {
- .name = "SSP4 PCM Mono in",
- .dev_addr = PXA3xx_SSP4_BASE + SSDR,
- .drcmr = &DRCMR(66),
- .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
- DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_stereo_out = {
- .name = "SSP4 PCM Stereo out",
- .dev_addr = PXA3xx_SSP4_BASE + SSDR,
- .drcmr = &DRCMR(67),
- .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
- DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_stereo_in = {
- .name = "SSP4 PCM Stereo in",
- .dev_addr = PXA3xx_SSP4_BASE + SSDR,
- .drcmr = &DRCMR(66),
- .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
- DCMD_BURST16 | DCMD_WIDTH4,
-};
-
static void dump_registers(struct ssp_device *ssp)
{
dev_dbg(&ssp->pdev->dev, "SSCR0 0x%08x SSCR1 0x%08x SSTO 0x%08x\n",
ssp_read_reg(ssp, SSACD));
}
-static struct pxa2xx_pcm_dma_params *ssp_dma_params[4][4] = {
- {
- &pxa_ssp1_pcm_mono_out, &pxa_ssp1_pcm_mono_in,
- &pxa_ssp1_pcm_stereo_out, &pxa_ssp1_pcm_stereo_in,
- },
- {
- &pxa_ssp2_pcm_mono_out, &pxa_ssp2_pcm_mono_in,
- &pxa_ssp2_pcm_stereo_out, &pxa_ssp2_pcm_stereo_in,
- },
- {
- &pxa_ssp3_pcm_mono_out, &pxa_ssp3_pcm_mono_in,
- &pxa_ssp3_pcm_stereo_out, &pxa_ssp3_pcm_stereo_in,
- },
- {
- &pxa_ssp4_pcm_mono_out, &pxa_ssp4_pcm_mono_in,
- &pxa_ssp4_pcm_stereo_out, &pxa_ssp4_pcm_stereo_in,
- },
+struct pxa2xx_pcm_dma_data {
+ struct pxa2xx_pcm_dma_params params;
+ char name[20];
};
+static struct pxa2xx_pcm_dma_params *
+ssp_get_dma_params(struct ssp_device *ssp, int stereo, int out)
+{
+ struct pxa2xx_pcm_dma_data *dma;
+
+ dma = kzalloc(sizeof(struct pxa2xx_pcm_dma_data), GFP_KERNEL);
+ if (dma == NULL)
+ return NULL;
+
+ snprintf(dma->name, 20, "SSP%d PCM %s %s", ssp->port_id,
+ stereo ? "Stereo" : "Mono", out ? "out" : "in");
+
+ dma->params.name = dma->name;
+ dma->params.drcmr = &DRCMR(out ? ssp->drcmr_tx : ssp->drcmr_rx);
+ dma->params.dcmd = (out ? (DCMD_INCSRCADDR | DCMD_FLOWTRG) :
+ (DCMD_INCTRGADDR | DCMD_FLOWSRC)) |
+ (stereo ? DCMD_WIDTH4 : DCMD_WIDTH2) | DCMD_BURST16;
+ dma->params.dev_addr = ssp->phys_base + SSDR;
+
+ return &dma->params;
+}
+
static int pxa_ssp_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
clk_enable(priv->dev.ssp->clk);
ssp_disable(&priv->dev);
}
+
+ if (cpu_dai->dma_data) {
+ kfree(cpu_dai->dma_data);
+ cpu_dai->dma_data = NULL;
+ }
return ret;
}
ssp_disable(&priv->dev);
clk_disable(priv->dev.ssp->clk);
}
+
+ if (cpu_dai->dma_data) {
+ kfree(cpu_dai->dma_data);
+ cpu_dai->dma_data = NULL;
+ }
}
#ifdef CONFIG_PM
* ssp_set_clkdiv - set SSP clock divider
* @div: serial clock rate divider
*/
-static void ssp_set_scr(struct ssp_dev *dev, u32 div)
+static void ssp_set_scr(struct ssp_device *ssp, u32 div)
+{
+ u32 sscr0 = ssp_read_reg(ssp, SSCR0);
+
+ if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP) {
+ sscr0 &= ~0x0000ff00;
+ sscr0 |= ((div - 2)/2) << 8; /* 2..512 */
+ } else {
+ sscr0 &= ~0x000fff00;
+ sscr0 |= (div - 1) << 8; /* 1..4096 */
+ }
+ ssp_write_reg(ssp, SSCR0, sscr0);
+}
+
+/**
+ * ssp_get_clkdiv - get SSP clock divider
+ */
+static u32 ssp_get_scr(struct ssp_device *ssp)
{
- struct ssp_device *ssp = dev->ssp;
- u32 sscr0 = ssp_read_reg(dev->ssp, SSCR0) & ~SSCR0_SCR;
+ u32 sscr0 = ssp_read_reg(ssp, SSCR0);
+ u32 div;
- ssp_write_reg(ssp, SSCR0, (sscr0 | SSCR0_SerClkDiv(div)));
+ if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP)
+ div = ((sscr0 >> 8) & 0xff) * 2 + 2;
+ else
+ div = ((sscr0 >> 8) & 0xfff) + 1;
+ return div;
}
/*
break;
case PXA_SSP_CLK_AUDIO:
priv->sysclk = 0;
- ssp_set_scr(&priv->dev, 1);
+ ssp_set_scr(ssp, 1);
sscr0 |= SSCR0_ACS;
break;
default:
ssp_write_reg(ssp, SSACD, val);
break;
case PXA_SSP_DIV_SCR:
- ssp_set_scr(&priv->dev, div);
+ ssp_set_scr(ssp, div);
break;
default:
return -ENODEV;
case SND_SOC_DAIFMT_NB_IF:
break;
case SND_SOC_DAIFMT_IB_IF:
- sspsp |= SSPSP_SCMODE(3);
+ sspsp |= SSPSP_SCMODE(2);
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ sspsp |= SSPSP_SCMODE(2) | SSPSP_SFRMP;
break;
default:
return -EINVAL;
case SND_SOC_DAIFMT_NB_NF:
sspsp |= SSPSP_SFRMP;
break;
+ case SND_SOC_DAIFMT_NB_IF:
+ break;
case SND_SOC_DAIFMT_IB_IF:
+ sspsp |= SSPSP_SCMODE(2);
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ sspsp |= SSPSP_SCMODE(2) | SSPSP_SFRMP;
break;
default:
return -EINVAL;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
struct ssp_priv *priv = cpu_dai->private_data;
struct ssp_device *ssp = priv->dev.ssp;
- int dma = 0, chn = params_channels(params);
+ int chn = params_channels(params);
u32 sscr0;
u32 sspsp;
int width = snd_pcm_format_physical_width(params_format(params));
+ int ttsa = ssp_read_reg(ssp, SSTSA) & 0xf;
- /* select correct DMA params */
- if (substream->stream != SNDRV_PCM_STREAM_PLAYBACK)
- dma = 1; /* capture DMA offset is 1,3 */
- if (chn == 2)
- dma += 2; /* stereo DMA offset is 2, mono is 0 */
- cpu_dai->dma_data = ssp_dma_params[cpu_dai->id][dma];
+ /* generate correct DMA params */
+ if (cpu_dai->dma_data)
+ kfree(cpu_dai->dma_data);
- dev_dbg(&ssp->pdev->dev, "pxa_ssp_hw_params: dma %d\n", dma);
+ /* Network mode with one active slot (ttsa == 1) can be used
+ * to force 16-bit frame width on the wire (for S16_LE), even
+ * with two channels. Use 16-bit DMA transfers for this case.
+ */
+ cpu_dai->dma_data = ssp_get_dma_params(ssp,
+ ((chn == 2) && (ttsa != 1)) || (width == 32),
+ substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
/* we can only change the settings if the port is not in use */
if (ssp_read_reg(ssp, SSCR0) & SSCR0_SSE)
case SND_SOC_DAIFMT_I2S:
sspsp = ssp_read_reg(ssp, SSPSP);
- if (((sscr0 & SSCR0_SCR) == SSCR0_SerClkDiv(4)) &&
- (width == 16)) {
+ if ((ssp_get_scr(ssp) == 4) && (width == 16)) {
/* This is a special case where the bitclk is 64fs
* and we're not dealing with 2*32 bits of audio
* samples.
/* When we use a network mode, we always require TDM slots
* - complain loudly and fail if they've not been set up yet.
*/
- if ((sscr0 & SSCR0_MOD) && !(ssp_read_reg(ssp, SSTSA) & 0xf)) {
+ if ((sscr0 & SSCR0_MOD) && !ttsa) {
dev_err(&ssp->pdev->dev, "No TDM timeslot configured\n");
return -EINVAL;
}
goto err_priv;
}
+ priv->dai_fmt = (unsigned int) -1;
dai->private_data = priv;
return 0;
git.samba.org / sfrench / cifs-2.6.git / blobdiff