config SND_SOC_ALL_CODECS
tristate "Build all ASoC CODEC drivers"
+ select SND_SOC_L3
select SND_SOC_AC97_CODEC if SND_SOC_AC97_BUS
select SND_SOC_AD1980 if SND_SOC_AC97_BUS
select SND_SOC_AD73311 if I2C
+ select SND_SOC_AK4104 if SPI_MASTER
select SND_SOC_AK4535 if I2C
select SND_SOC_CS4270 if I2C
select SND_SOC_PCM3008
select SND_SOC_UDA134X
select SND_SOC_UDA1380 if I2C
select SND_SOC_WM8350 if MFD_WM8350
+ select SND_SOC_WM8400 if MFD_WM8400
select SND_SOC_WM8510 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8580 if I2C
select SND_SOC_WM8728 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8900 if I2C
select SND_SOC_WM8903 if I2C
+ select SND_SOC_WM8960 if I2C
select SND_SOC_WM8971 if I2C
+ select SND_SOC_WM8988 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8990 if I2C
select SND_SOC_WM9705 if SND_SOC_AC97_BUS
select SND_SOC_WM9712 if SND_SOC_AC97_BUS
config SND_SOC_AD73311
tristate
+config SND_SOC_AK4104
+ tristate
+
config SND_SOC_AK4535
tristate
config SND_SOC_CS4270
tristate
-# Cirrus Logic CS4270 Codec Hardware Mute Support
-# Select if you have external muting circuitry attached to your CS4270.
-config SND_SOC_CS4270_HWMUTE
- bool
- depends on SND_SOC_CS4270
-
# Cirrus Logic CS4270 Codec VD = 3.3V Errata
# Select if you are affected by the errata where the part will not function
# if MCLK divide-by-1.5 is selected and VD is set to 3.3V. The driver will
config SND_SOC_TLV320AIC23
tristate
- depends on I2C
config SND_SOC_TLV320AIC26
tristate "TI TLV320AIC26 Codec support" if SND_SOC_OF_SIMPLE
config SND_SOC_TLV320AIC3X
tristate
- depends on I2C
config SND_SOC_TWL4030
tristate
- depends on TWL4030_CORE
config SND_SOC_UDA134X
tristate
- select SND_SOC_L3
config SND_SOC_UDA1380
tristate
config SND_SOC_WM8350
tristate
+config SND_SOC_WM8400
+ tristate
+
config SND_SOC_WM8510
tristate
config SND_SOC_WM8903
tristate
+config SND_SOC_WM8960
+ tristate
+
config SND_SOC_WM8971
tristate
+config SND_SOC_WM8988
+ tristate
+
config SND_SOC_WM8990
tristate