static void alc_free_kctls(struct hda_codec *codec);
+#ifdef CONFIG_SND_HDA_INPUT_BEEP
/* additional beep mixers; the actual parameters are overwritten at build */
static struct snd_kcontrol_new alc_beep_mixer[] = {
HDA_CODEC_VOLUME("Beep Playback Volume", 0, 0, HDA_INPUT),
- HDA_CODEC_MUTE("Beep Playback Switch", 0, 0, HDA_INPUT),
+ HDA_CODEC_MUTE_BEEP("Beep Playback Switch", 0, 0, HDA_INPUT),
{ } /* end */
};
+#endif
static int alc_build_controls(struct hda_codec *codec)
{
return err;
}
+#ifdef CONFIG_SND_HDA_INPUT_BEEP
/* create beep controls if needed */
if (spec->beep_amp) {
struct snd_kcontrol_new *knew;
if (!kctl)
return -ENOMEM;
kctl->private_value = spec->beep_amp;
- err = snd_hda_ctl_add(codec, kctl);
+ err = snd_hda_ctl_add(codec,
+ get_amp_nid_(spec->beep_amp), kctl);
if (err < 0)
return err;
}
}
+#endif
/* if we have no master control, let's create it */
if (!spec->no_analog &&
knew->name = kstrdup(name, GFP_KERNEL);
if (!knew->name)
return -ENOMEM;
+ if (get_amp_nid_(val))
+ knew->subdevice = HDA_SUBDEV_NID_FLAG | get_amp_nid_(val);
knew->private_value = val;
return 0;
}
spec->multiout.dig_out_nid = dig_nid;
else {
spec->multiout.slave_dig_outs = spec->slave_dig_outs;
- spec->slave_dig_outs[i - 1] = dig_nid;
- if (i == ARRAY_SIZE(spec->slave_dig_outs) - 1)
+ if (i >= ARRAY_SIZE(spec->slave_dig_outs) - 1)
break;
+ spec->slave_dig_outs[i - 1] = dig_nid;
}
}
if (spec->autocfg.dig_in_pin)
}
}
+#ifdef CONFIG_SND_HDA_INPUT_BEEP
#define set_beep_amp(spec, nid, idx, dir) \
((spec)->beep_amp = HDA_COMPOSE_AMP_VAL(nid, 3, idx, dir))
+#else
+#define set_beep_amp(spec, nid, idx, dir) /* NOP */
+#endif
/*
* OK, here we have finally the patch for ALC880
SND_PCI_QUIRK(0x1025, 0x008f, "Acer", ALC260_ACER),
SND_PCI_QUIRK(0x1509, 0x4540, "Favorit 100XS", ALC260_FAVORIT100),
SND_PCI_QUIRK(0x103c, 0x2808, "HP d5700", ALC260_HP_3013),
- SND_PCI_QUIRK(0x103c, 0x280a, "HP d5750", ALC260_HP_3013),
+ SND_PCI_QUIRK(0x103c, 0x280a, "HP d5750", ALC260_AUTO), /* no quirk */
SND_PCI_QUIRK(0x103c, 0x3010, "HP", ALC260_HP_3013),
SND_PCI_QUIRK(0x103c, 0x3011, "HP", ALC260_HP_3013),
SND_PCI_QUIRK(0x103c, 0x3012, "HP", ALC260_HP_DC7600),
HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x01, HDA_INPUT),
HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x01, HDA_INPUT),
/* FIXME: this looks suspicious...
- HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Beep Playback Volume", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Beep Playback Switch", 0x0b, 0x02, HDA_INPUT),
*/
{ } /* end */
};
SND_PCI_QUIRK(0x106b, 0x3800, "MacbookPro 4,1", ALC885_MBP3),
SND_PCI_QUIRK(0x106b, 0x3e00, "iMac 24 Aluminum", ALC885_IMAC24),
SND_PCI_QUIRK(0x106b, 0x3f00, "Macbook 5,1", ALC885_MB5),
- /* FIXME: HP jack sense seems not working for MBP 5,1, so apparently
- * no perfect solution yet
+ /* FIXME: HP jack sense seems not working for MBP 5,1 or 5,2,
+ * so apparently no perfect solution yet
*/
SND_PCI_QUIRK(0x106b, 0x4000, "MacbookPro 5,1", ALC885_MB5),
+ SND_PCI_QUIRK(0x106b, 0x4600, "MacbookPro 5,2", ALC885_MB5),
{} /* terminator */
};
spec->multiout.dig_out_nid = dig_nid;
else {
spec->multiout.slave_dig_outs = spec->slave_dig_outs;
- spec->slave_dig_outs[i - 1] = dig_nid;
- if (i == ARRAY_SIZE(spec->slave_dig_outs) - 1)
+ if (i >= ARRAY_SIZE(spec->slave_dig_outs) - 1)
break;
+ spec->slave_dig_outs[i - 1] = dig_nid;
}
}
if (spec->autocfg.dig_in_pin)
SND_PCI_QUIRK(0x104d, 0x820f, "Sony ASSAMD", ALC262_SONY_ASSAMD),
SND_PCI_QUIRK(0x104d, 0x9016, "Sony VAIO", ALC262_AUTO), /* dig-only */
SND_PCI_QUIRK(0x104d, 0x9025, "Sony VAIO Z21MN", ALC262_TOSHIBA_S06),
+ SND_PCI_QUIRK(0x104d, 0x9035, "Sony VAIO VGN-FW170J", ALC262_AUTO),
+ SND_PCI_QUIRK(0x104d, 0x9047, "Sony VAIO Type G", ALC262_AUTO),
SND_PCI_QUIRK_MASK(0x104d, 0xff00, 0x9000, "Sony VAIO",
ALC262_SONY_ASSAMD),
SND_PCI_QUIRK(0x1179, 0x0001, "Toshiba dynabook SS RX1",