Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

[sfrench/cifs-2.6.git] / sound / oss / opl3sa2.c

diff --git a/sound/oss/opl3sa2.c b/sound/oss/opl3sa2.c
index cd41d0e4706a90721ee09982b1d50a3f66eeb819..e20051f1be4d7b0efcdc3a88eeb004ae7a963dfd 100644 (file)
--- a/sound/oss/opl3sa2.c
+++ b/sound/oss/opl3sa2.c
@@ -1,5 +1,5 @@
 /*
- * sound/opl3sa2.c
+ * sound/oss/opl3sa2.c
  *
  * A low level driver for Yamaha OPL3-SA2 and SA3 cards.
  * NOTE: All traces of the name OPL3-SAx have now (December 2000) been
@@ -64,13 +64,10 @@
  *   
  */
 
-#include <linux/config.h>
 #include <linux/pnp.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/delay.h>
-#include <linux/pm.h>
-#include <linux/pm_legacy.h>
 #include "sound_config.h"
 
 #include "ad1848.h"
@@ -138,10 +135,6 @@ typedef struct {
        /* PnP Stuff */
        struct pnp_dev* pdev;
        int activated;                  /* Whether said devices have been activated */
-#endif
-#ifdef CONFIG_PM_LEGACY
-       unsigned int    in_suspend;
-       struct pm_dev   *pmdev;
 #endif
        unsigned int    card;
        int             chipset;        /* What's my version(s)? */
@@ -341,22 +334,6 @@ static void opl3sa2_mixer_reset(opl3sa2_state_t* devc)
        }
 }
 
-/* Currently only used for power management */
-#ifdef CONFIG_PM_LEGACY
-static void opl3sa2_mixer_restore(opl3sa2_state_t* devc)
-{
-       if (devc) {
-               opl3sa2_set_volume(devc, devc->volume_l, devc->volume_r);
-               opl3sa2_set_mic(devc, devc->mic);
-
-               if (devc->chipset == CHIPSET_OPL3SA3) {
-                       opl3sa3_set_bass(devc, devc->bass_l, devc->bass_r);
-                       opl3sa3_set_treble(devc, devc->treble_l, devc->treble_r);
-               }
-       }
-}
-#endif /* CONFIG_PM_LEGACY */
-
 static inline void arg_to_vol_mono(unsigned int vol, int* value)
 {
        int left;
@@ -552,7 +529,7 @@ static void __init attach_opl3sa2_mss(struct address_info* hw_config, struct res
        if (hw_config->slots[0] != -1) {
                /* Did the MSS driver install? */
                if(num_mixers == (initial_mixers + 1)) {
-                       /* The MSS mixer is installed, reroute mixers appropiately */
+                       /* The MSS mixer is installed, reroute mixers appropriately */
                        AD1848_REROUTE(SOUND_MIXER_LINE1, SOUND_MIXER_CD);
                        AD1848_REROUTE(SOUND_MIXER_LINE2, SOUND_MIXER_SYNTH);
                        AD1848_REROUTE(SOUND_MIXER_LINE3, SOUND_MIXER_LINE);
@@ -832,84 +809,6 @@ static struct pnp_driver opl3sa2_driver = {
 
 /* End of component functions */
 
-#ifdef CONFIG_PM_LEGACY
-
-static DEFINE_SPINLOCK(opl3sa2_lock);
-
-/* Power Management support functions */
-static int opl3sa2_suspend(struct pm_dev *pdev, unsigned int pm_mode)
-{
-       unsigned long flags;
-       opl3sa2_state_t *p;
-
-       if (!pdev)
-               return -EINVAL;
-
-       spin_lock_irqsave(&opl3sa2_lock,flags);
-
-       p = (opl3sa2_state_t *) pdev->data;
-       switch (pm_mode) {
-       case 1:
-               pm_mode = OPL3SA2_PM_MODE1;
-               break;
-       case 2:
-               pm_mode = OPL3SA2_PM_MODE2;
-               break;
-       case 3:
-               pm_mode = OPL3SA2_PM_MODE3;
-               break;
-       default:
-               /* we don't know howto handle this... */
-               spin_unlock_irqrestore(&opl3sa2_lock, flags);
-               return -EBUSY;
-       }
-
-       p->in_suspend = 1;
-
-       /* its supposed to automute before suspending, so we won't bother */
-       opl3sa2_write(p->cfg_port, OPL3SA2_PM, pm_mode);
-       /* wait a while for the clock oscillator to stabilise */
-       mdelay(10);
-
-       spin_unlock_irqrestore(&opl3sa2_lock,flags);
-       return 0;
-}
-
-static int opl3sa2_resume(struct pm_dev *pdev)
-{
-       unsigned long flags;
-       opl3sa2_state_t *p;
-
-       if (!pdev)
-               return -EINVAL;
-
-       p = (opl3sa2_state_t *) pdev->data;
-       spin_lock_irqsave(&opl3sa2_lock,flags);
-
-       /* I don't think this is necessary */
-       opl3sa2_write(p->cfg_port, OPL3SA2_PM, OPL3SA2_PM_MODE0);
-       opl3sa2_mixer_restore(p);
-       p->in_suspend = 0;
-
-       spin_unlock_irqrestore(&opl3sa2_lock,flags);
-       return 0;
-}
-
-static int opl3sa2_pm_callback(struct pm_dev *pdev, pm_request_t rqst, void *data)
-{
-       unsigned long mode = (unsigned  long)data;
-
-       switch (rqst) {
-               case PM_SUSPEND:
-                       return opl3sa2_suspend(pdev, mode);
-
-               case PM_RESUME:
-                       return opl3sa2_resume(pdev);
-       }
-       return 0;
-}
-#endif /* CONFIG_PM_LEGACY */
-
 /*
  * Install OPL3-SA2 based card(s).
  *
@@ -1021,12 +920,6 @@ static int __init init_opl3sa2(void)
 
                /* ewww =) */
                opl3sa2_state[card].card = card;
-#ifdef CONFIG_PM_LEGACY
-               /* register our power management capabilities */
-               opl3sa2_state[card].pmdev = pm_register(PM_ISA_DEV, card, opl3sa2_pm_callback);
-               if (opl3sa2_state[card].pmdev)
-                       opl3sa2_state[card].pmdev->data = &opl3sa2_state[card];
-#endif /* CONFIG_PM_LEGACY */
 
                /*
                 * Set the Yamaha 3D enhancement mode (aka Ymersion) if asked to and
@@ -1083,10 +976,6 @@ static void __exit cleanup_opl3sa2(void)
        int card;
 
        for(card = 0; card < opl3sa2_cards_num; card++) {
-#ifdef CONFIG_PM_LEGACY
-               if (opl3sa2_state[card].pmdev)
-                       pm_unregister(opl3sa2_state[card].pmdev);
-#endif
                if (opl3sa2_state[card].cfg_mpu.slots[1] != -1) {
                        unload_opl3sa2_mpu(&opl3sa2_state[card].cfg_mpu);
                }