*
***************************************************************************************************/
-#include <sound/driver.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <asm/mach-types.h>
#include <asm/dma.h>
-#ifdef CONFIG_H3600_HAL
-#include <asm/semaphore.h>
-#include <asm/uaccess.h>
-#include <asm/arch/h3600_hal.h>
-#endif
-
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/initval.h>
* We use DMA stuff from 2.4.18-rmk3-hh24 here to be able to compile this
* module for Familiar 0.6.1
*/
-#ifdef CONFIG_H3600_HAL
-#define HH_VERSION 1
-#endif
/* {{{ Type definitions */
#else
dma_regs_t *dma_regs; /* points to our DMA registers */
#endif
- int active:1; /* we are using this stream for transfer now */
+ unsigned int active:1; /* we are using this stream for transfer now */
int period; /* current transfer period */
int periods; /* current count of periods registerd in the DMA engine */
int tx_spin; /* are we recoding - flag used to do DMA trans. for sync */
rate = 8000;
/* Set the external clock generator */
-#ifdef CONFIG_H3600_HAL
- h3600_audio_clock(rate);
-#else
+
sa11xx_uda1341_set_audio_clock(rate);
-#endif
/* Select the clock divisor */
switch (rate) {
local_irq_restore(flags);
/* Enable the audio power */
-#ifdef CONFIG_H3600_HAL
- h3600_audio_power(AUDIO_RATE_DEFAULT);
-#else
+
clr_sa11xx_uda1341_egpio(IPAQ_EGPIO_CODEC_NRESET);
set_sa11xx_uda1341_egpio(IPAQ_EGPIO_AUDIO_ON);
set_sa11xx_uda1341_egpio(IPAQ_EGPIO_QMUTE);
-#endif
/* Wait for the UDA1341 to wake up */
mdelay(1); //FIXME - was removed by Perex - Why?
/* make the left and right channels unswapped (flip the WS latch) */
Ser4SSDR = 0;
-#ifdef CONFIG_H3600_HAL
- h3600_audio_mute(0);
-#else
- clr_sa11xx_uda1341_egpio(IPAQ_EGPIO_QMUTE);
-#endif
+ clr_sa11xx_uda1341_egpio(IPAQ_EGPIO_QMUTE);
}
static void sa11xx_uda1341_audio_shutdown(struct sa11xx_uda1341 *sa11xx_uda1341)
{
/* mute on */
-#ifdef CONFIG_H3600_HAL
- h3600_audio_mute(1);
-#else
set_sa11xx_uda1341_egpio(IPAQ_EGPIO_QMUTE);
-#endif
/* disable the audio power and all signals leading to the audio chip */
l3_close(sa11xx_uda1341->uda1341);
/* power off and mute off */
/* FIXME - is muting off necesary??? */
-#ifdef CONFIG_H3600_HAL
- h3600_audio_power(0);
- h3600_audio_mute(0);
-#else
+
clr_sa11xx_uda1341_egpio(IPAQ_EGPIO_AUDIO_ON);
clr_sa11xx_uda1341_egpio(IPAQ_EGPIO_QMUTE);
-#endif
}
/* }}} */
if (platform_get_drvdata(device))
return 0;
platform_device_unregister(device);
- err = -ENODEV
+ err = -ENODEV;
} else
err = PTR_ERR(device);
platform_driver_unregister(&sa11xx_uda1341_driver);