/*
* Dynamic DMA mapping support.
*
- * This implementation is for IA-64 and EM64T platforms that do not support
+ * This implementation is a fallback for platforms that do not support
* I/O TLBs (aka DMA address translation hardware).
* Copyright (C) 2000 Asit Mallick <Asit.K.Mallick@intel.com>
* Copyright (C) 2000 Goutham Rao <goutham.rao@intel.com>
( (val) & ( (align) - 1)))
#define SG_ENT_VIRT_ADDRESS(sg) (page_address((sg)->page) + (sg)->offset)
-#define SG_ENT_PHYS_ADDRESS(SG) virt_to_phys(SG_ENT_VIRT_ADDRESS(SG))
+#define SG_ENT_PHYS_ADDRESS(sg) virt_to_bus(SG_ENT_VIRT_ADDRESS(sg))
/*
* Maximum allowable number of contiguous slabs to map,
* Statically reserve bounce buffer space and initialize bounce buffer data
* structures for the software IO TLB used to implement the DMA API.
*/
-void
-swiotlb_init_with_default_size (size_t default_size)
+void __init
+swiotlb_init_with_default_size(size_t default_size)
{
- unsigned long i;
+ unsigned long i, bytes;
if (!io_tlb_nslabs) {
io_tlb_nslabs = (default_size >> IO_TLB_SHIFT);
io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE);
}
+ bytes = io_tlb_nslabs << IO_TLB_SHIFT;
+
/*
* Get IO TLB memory from the low pages
*/
- io_tlb_start = alloc_bootmem_low_pages(io_tlb_nslabs * (1 << IO_TLB_SHIFT));
+ io_tlb_start = alloc_bootmem_low_pages(bytes);
if (!io_tlb_start)
panic("Cannot allocate SWIOTLB buffer");
- io_tlb_end = io_tlb_start + io_tlb_nslabs * (1 << IO_TLB_SHIFT);
+ io_tlb_end = io_tlb_start + bytes;
/*
* Allocate and initialize the free list array. This array is used
* Get the overflow emergency buffer
*/
io_tlb_overflow_buffer = alloc_bootmem_low(io_tlb_overflow);
+ if (!io_tlb_overflow_buffer)
+ panic("Cannot allocate SWIOTLB overflow buffer!\n");
+
printk(KERN_INFO "Placing software IO TLB between 0x%lx - 0x%lx\n",
- virt_to_phys(io_tlb_start), virt_to_phys(io_tlb_end));
+ virt_to_bus(io_tlb_start), virt_to_bus(io_tlb_end));
}
-void
-swiotlb_init (void)
+void __init
+swiotlb_init(void)
{
swiotlb_init_with_default_size(64 * (1<<20)); /* default to 64MB */
}
* This should be just like above, but with some error catching.
*/
int
-swiotlb_late_init_with_default_size (size_t default_size)
+swiotlb_late_init_with_default_size(size_t default_size)
{
- unsigned long i, req_nslabs = io_tlb_nslabs;
+ unsigned long i, bytes, req_nslabs = io_tlb_nslabs;
unsigned int order;
if (!io_tlb_nslabs) {
/*
* Get IO TLB memory from the low pages
*/
- order = get_order(io_tlb_nslabs * (1 << IO_TLB_SHIFT));
+ order = get_order(io_tlb_nslabs << IO_TLB_SHIFT);
io_tlb_nslabs = SLABS_PER_PAGE << order;
+ bytes = io_tlb_nslabs << IO_TLB_SHIFT;
while ((SLABS_PER_PAGE << order) > IO_TLB_MIN_SLABS) {
io_tlb_start = (char *)__get_free_pages(GFP_DMA | __GFP_NOWARN,
if (!io_tlb_start)
goto cleanup1;
- if (order != get_order(io_tlb_nslabs * (1 << IO_TLB_SHIFT))) {
+ if (order != get_order(bytes)) {
printk(KERN_WARNING "Warning: only able to allocate %ld MB "
"for software IO TLB\n", (PAGE_SIZE << order) >> 20);
io_tlb_nslabs = SLABS_PER_PAGE << order;
+ bytes = io_tlb_nslabs << IO_TLB_SHIFT;
}
- io_tlb_end = io_tlb_start + io_tlb_nslabs * (1 << IO_TLB_SHIFT);
- memset(io_tlb_start, 0, io_tlb_nslabs * (1 << IO_TLB_SHIFT));
+ io_tlb_end = io_tlb_start + bytes;
+ memset(io_tlb_start, 0, bytes);
/*
* Allocate and initialize the free list array. This array is used
if (!io_tlb_overflow_buffer)
goto cleanup4;
- printk(KERN_INFO "Placing %ldMB software IO TLB between 0x%lx - "
- "0x%lx\n", (io_tlb_nslabs * (1 << IO_TLB_SHIFT)) >> 20,
- virt_to_phys(io_tlb_start), virt_to_phys(io_tlb_end));
+ printk(KERN_INFO "Placing %luMB software IO TLB between 0x%lx - "
+ "0x%lx\n", bytes >> 20,
+ virt_to_bus(io_tlb_start), virt_to_bus(io_tlb_end));
return 0;
free_pages((unsigned long)io_tlb_list, get_order(io_tlb_nslabs *
sizeof(int)));
io_tlb_list = NULL;
- io_tlb_end = NULL;
cleanup2:
+ io_tlb_end = NULL;
free_pages((unsigned long)io_tlb_start, order);
io_tlb_start = NULL;
cleanup1:
return -ENOMEM;
}
-static inline int
+static int
address_needs_mapping(struct device *hwdev, dma_addr_t addr)
{
dma_addr_t mask = 0xffffffff;
swiotlb_alloc_coherent(struct device *hwdev, size_t size,
dma_addr_t *dma_handle, gfp_t flags)
{
- unsigned long dev_addr;
+ dma_addr_t dev_addr;
void *ret;
int order = get_order(size);
flags |= GFP_DMA;
ret = (void *)__get_free_pages(flags, order);
- if (ret && address_needs_mapping(hwdev, virt_to_phys(ret))) {
+ if (ret && address_needs_mapping(hwdev, virt_to_bus(ret))) {
/*
* The allocated memory isn't reachable by the device.
* Fall back on swiotlb_map_single().
if (swiotlb_dma_mapping_error(handle))
return NULL;
- ret = phys_to_virt(handle);
+ ret = bus_to_virt(handle);
}
memset(ret, 0, size);
- dev_addr = virt_to_phys(ret);
+ dev_addr = virt_to_bus(ret);
/* Confirm address can be DMA'd by device */
if (address_needs_mapping(hwdev, dev_addr)) {
- printk("hwdev DMA mask = 0x%016Lx, dev_addr = 0x%016lx\n",
- (unsigned long long)*hwdev->dma_mask, dev_addr);
+ printk("hwdev DMA mask = 0x%016Lx, dev_addr = 0x%016Lx\n",
+ (unsigned long long)*hwdev->dma_mask,
+ (unsigned long long)dev_addr);
panic("swiotlb_alloc_coherent: allocated memory is out of "
"range for device");
}
* When the mapping is small enough return a static buffer to limit
* the damage, or panic when the transfer is too big.
*/
- printk(KERN_ERR "DMA: Out of SW-IOMMU space for %lu bytes at "
+ printk(KERN_ERR "DMA: Out of SW-IOMMU space for %zu bytes at "
"device %s\n", size, dev ? dev->bus_id : "?");
if (size > io_tlb_overflow && do_panic) {
dma_addr_t
swiotlb_map_single(struct device *hwdev, void *ptr, size_t size, int dir)
{
- unsigned long dev_addr = virt_to_phys(ptr);
+ dma_addr_t dev_addr = virt_to_bus(ptr);
void *map;
BUG_ON(dir == DMA_NONE);
map = io_tlb_overflow_buffer;
}
- dev_addr = virt_to_phys(map);
+ dev_addr = virt_to_bus(map);
/*
* Ensure that the address returned is DMA'ble
return dev_addr;
}
-/*
- * Since DMA is i-cache coherent, any (complete) pages that were written via
- * DMA can be marked as "clean" so that lazy_mmu_prot_update() doesn't have to
- * flush them when they get mapped into an executable vm-area.
- */
-static void
-mark_clean(void *addr, size_t size)
-{
- unsigned long pg_addr, end;
-
- pg_addr = PAGE_ALIGN((unsigned long) addr);
- end = (unsigned long) addr + size;
- while (pg_addr + PAGE_SIZE <= end) {
- struct page *page = virt_to_page(pg_addr);
- set_bit(PG_arch_1, &page->flags);
- pg_addr += PAGE_SIZE;
- }
-}
-
/*
* Unmap a single streaming mode DMA translation. The dma_addr and size must
* match what was provided for in a previous swiotlb_map_single call. All
swiotlb_unmap_single(struct device *hwdev, dma_addr_t dev_addr, size_t size,
int dir)
{
- char *dma_addr = phys_to_virt(dev_addr);
+ char *dma_addr = bus_to_virt(dev_addr);
BUG_ON(dir == DMA_NONE);
if (dma_addr >= io_tlb_start && dma_addr < io_tlb_end)
unmap_single(hwdev, dma_addr, size, dir);
else if (dir == DMA_FROM_DEVICE)
- mark_clean(dma_addr, size);
+ dma_mark_clean(dma_addr, size);
}
/*
* address back to the card, you must first perform a
* swiotlb_dma_sync_for_device, and then the device again owns the buffer
*/
-static inline void
+static void
swiotlb_sync_single(struct device *hwdev, dma_addr_t dev_addr,
size_t size, int dir, int target)
{
- char *dma_addr = phys_to_virt(dev_addr);
+ char *dma_addr = bus_to_virt(dev_addr);
BUG_ON(dir == DMA_NONE);
if (dma_addr >= io_tlb_start && dma_addr < io_tlb_end)
sync_single(hwdev, dma_addr, size, dir, target);
else if (dir == DMA_FROM_DEVICE)
- mark_clean(dma_addr, size);
+ dma_mark_clean(dma_addr, size);
}
void
/*
* Same as above, but for a sub-range of the mapping.
*/
-static inline void
+static void
swiotlb_sync_single_range(struct device *hwdev, dma_addr_t dev_addr,
unsigned long offset, size_t size,
int dir, int target)
{
- char *dma_addr = phys_to_virt(dev_addr) + offset;
+ char *dma_addr = bus_to_virt(dev_addr) + offset;
BUG_ON(dir == DMA_NONE);
if (dma_addr >= io_tlb_start && dma_addr < io_tlb_end)
sync_single(hwdev, dma_addr, size, dir, target);
else if (dir == DMA_FROM_DEVICE)
- mark_clean(dma_addr, size);
+ dma_mark_clean(dma_addr, size);
}
void
int dir)
{
void *addr;
- unsigned long dev_addr;
+ dma_addr_t dev_addr;
int i;
BUG_ON(dir == DMA_NONE);
for (i = 0; i < nelems; i++, sg++) {
addr = SG_ENT_VIRT_ADDRESS(sg);
- dev_addr = virt_to_phys(addr);
+ dev_addr = virt_to_bus(addr);
if (swiotlb_force || address_needs_mapping(hwdev, dev_addr)) {
void *map = map_single(hwdev, addr, sg->length, dir);
- sg->dma_address = virt_to_bus(map);
if (!map) {
/* Don't panic here, we expect map_sg users
to do proper error handling. */
sg[0].dma_length = 0;
return 0;
}
+ sg->dma_address = virt_to_bus(map);
} else
sg->dma_address = dev_addr;
sg->dma_length = sg->length;
for (i = 0; i < nelems; i++, sg++)
if (sg->dma_address != SG_ENT_PHYS_ADDRESS(sg))
- unmap_single(hwdev, (void *) phys_to_virt(sg->dma_address), sg->dma_length, dir);
+ unmap_single(hwdev, bus_to_virt(sg->dma_address),
+ sg->dma_length, dir);
else if (dir == DMA_FROM_DEVICE)
- mark_clean(SG_ENT_VIRT_ADDRESS(sg), sg->dma_length);
+ dma_mark_clean(SG_ENT_VIRT_ADDRESS(sg), sg->dma_length);
}
/*
* The same as swiotlb_sync_single_* but for a scatter-gather list, same rules
* and usage.
*/
-static inline void
+static void
swiotlb_sync_sg(struct device *hwdev, struct scatterlist *sg,
int nelems, int dir, int target)
{
for (i = 0; i < nelems; i++, sg++)
if (sg->dma_address != SG_ENT_PHYS_ADDRESS(sg))
- sync_single(hwdev, (void *) sg->dma_address,
+ sync_single(hwdev, bus_to_virt(sg->dma_address),
sg->dma_length, dir, target);
+ else if (dir == DMA_FROM_DEVICE)
+ dma_mark_clean(SG_ENT_VIRT_ADDRESS(sg), sg->dma_length);
}
void
int
swiotlb_dma_mapping_error(dma_addr_t dma_addr)
{
- return (dma_addr == virt_to_phys(io_tlb_overflow_buffer));
+ return (dma_addr == virt_to_bus(io_tlb_overflow_buffer));
}
/*
* this function.
*/
int
-swiotlb_dma_supported (struct device *hwdev, u64 mask)
+swiotlb_dma_supported(struct device *hwdev, u64 mask)
{
- return (virt_to_phys (io_tlb_end) - 1) <= mask;
+ return virt_to_bus(io_tlb_end - 1) <= mask;
}
-EXPORT_SYMBOL(swiotlb_init);
EXPORT_SYMBOL(swiotlb_map_single);
EXPORT_SYMBOL(swiotlb_unmap_single);
EXPORT_SYMBOL(swiotlb_map_sg);
git.samba.org / sfrench / cifs-2.6.git / blobdiff