struct per_cpu_pages {
int count; /* number of pages in the list */
- int low; /* low watermark, refill needed */
int high; /* high watermark, emptying needed */
int batch; /* chunk size for buddy add/remove */
struct list_head list; /* the list of pages */
#endif
#define ZONE_DMA 0
-#define ZONE_NORMAL 1
-#define ZONE_HIGHMEM 2
+#define ZONE_DMA32 1
+#define ZONE_NORMAL 2
+#define ZONE_HIGHMEM 3
-#define MAX_NR_ZONES 3 /* Sync this with ZONES_SHIFT */
+#define MAX_NR_ZONES 4 /* Sync this with ZONES_SHIFT */
#define ZONES_SHIFT 2 /* ceil(log2(MAX_NR_ZONES)) */
* will be a maximum of 4 (2 ** 2) zonelists, for 3 modifiers there will
* be 8 (2 ** 3) zonelists. GFP_ZONETYPES defines the number of possible
* combinations of zone modifiers in "zone modifier space".
+ *
+ * NOTE! Make sure this matches the zones in <linux/gfp.h>
*/
-#define GFP_ZONEMASK 0x03
-/*
- * As an optimisation any zone modifier bits which are only valid when
- * no other zone modifier bits are set (loners) should be placed in
- * the highest order bits of this field. This allows us to reduce the
- * extent of the zonelists thus saving space. For example in the case
- * of three zone modifier bits, we could require up to eight zonelists.
- * If the left most zone modifier is a "loner" then the highest valid
- * zonelist would be four allowing us to allocate only five zonelists.
- * Use the first form when the left most bit is not a "loner", otherwise
- * use the second.
- */
-/* #define GFP_ZONETYPES (GFP_ZONEMASK + 1) */ /* Non-loner */
-#define GFP_ZONETYPES ((GFP_ZONEMASK + 1) / 2 + 1) /* Loner */
+#define GFP_ZONEMASK 0x07
+#define GFP_ZONETYPES 5
/*
* On machines where it is needed (eg PCs) we divide physical memory
- * into multiple physical zones. On a PC we have 3 zones:
+ * into multiple physical zones. On a PC we have 4 zones:
*
* ZONE_DMA < 16 MB ISA DMA capable memory
+ * ZONE_DMA32 0 MB Empty
* ZONE_NORMAL 16-896 MB direct mapped by the kernel
* ZONE_HIGHMEM > 896 MB only page cache and user processes
*/
void build_all_zonelists(void);
void wakeup_kswapd(struct zone *zone, int order);
int zone_watermark_ok(struct zone *z, int order, unsigned long mark,
- int alloc_type, int can_try_harder, gfp_t gfp_high);
+ int classzone_idx, int alloc_flags);
#ifdef CONFIG_HAVE_MEMORY_PRESENT
void memory_present(int nid, unsigned long start, unsigned long end);
#define for_each_zone(zone) \
for (zone = pgdat_list->node_zones; zone; zone = next_zone(zone))
+static inline int populated_zone(struct zone *zone)
+{
+ return (!!zone->present_pages);
+}
+
static inline int is_highmem_idx(int idx)
{
return (idx == ZONE_HIGHMEM);
{
return (idx == ZONE_NORMAL);
}
+
/**
* is_highmem - helper function to quickly check if a struct zone is a
* highmem zone or not. This is an attempt to keep references
return zone == zone->zone_pgdat->node_zones + ZONE_NORMAL;
}
+static inline int is_dma32(struct zone *zone)
+{
+ return zone == zone->zone_pgdat->node_zones + ZONE_DMA32;
+}
+
+static inline int is_dma(struct zone *zone)
+{
+ return zone == zone->zone_pgdat->node_zones + ZONE_DMA;
+}
+
/* These two functions are used to setup the per zone pages min values */
struct ctl_table;
struct file;
#include <linux/topology.h>
/* Returns the number of the current Node. */
+#ifndef numa_node_id
#define numa_node_id() (cpu_to_node(raw_smp_processor_id()))
+#endif
#ifndef CONFIG_NEED_MULTIPLE_NODES
#define NODE_DATA(nid) (&contig_page_data)
#define NODE_MEM_MAP(nid) mem_map
#define MAX_NODES_SHIFT 1
-#define pfn_to_nid(pfn) (0)
#else /* CONFIG_NEED_MULTIPLE_NODES */
#include <asm/sparsemem.h>
#endif
-#if BITS_PER_LONG == 32 || defined(ARCH_HAS_ATOMIC_UNSIGNED)
+#if BITS_PER_LONG == 32
/*
- * with 32 bit page->flags field, we reserve 8 bits for node/zone info.
- * there are 3 zones (2 bits) and this leaves 8-2=6 bits for nodes.
+ * with 32 bit page->flags field, we reserve 9 bits for node/zone info.
+ * there are 4 zones (3 bits) and this leaves 9-3=6 bits for nodes.
*/
-#define FLAGS_RESERVED 8
+#define FLAGS_RESERVED 9
#elif BITS_PER_LONG == 64
/*
#define early_pfn_to_nid(nid) (0UL)
#endif
+#ifdef CONFIG_FLATMEM
+#define pfn_to_nid(pfn) (0)
+#endif
+
#define pfn_to_section_nr(pfn) ((pfn) >> PFN_SECTION_SHIFT)
#define section_nr_to_pfn(sec) ((sec) << PFN_SECTION_SHIFT)
return valid_section(__nr_to_section(nr));
}
-/*
- * Given a kernel address, find the home node of the underlying memory.
- */
-#define kvaddr_to_nid(kaddr) pfn_to_nid(__pa(kaddr) >> PAGE_SHIFT)
-
static inline struct mem_section *__pfn_to_section(unsigned long pfn)
{
return __nr_to_section(pfn_to_section_nr(pfn));
* this restriction.
*/
#ifdef CONFIG_NUMA
-#define pfn_to_nid early_pfn_to_nid
-#endif
-
-#define pfn_to_pgdat(pfn) \
+#define pfn_to_nid(pfn) \
({ \
- NODE_DATA(pfn_to_nid(pfn)); \
+ unsigned long __pfn_to_nid_pfn = (pfn); \
+ page_to_nid(pfn_to_page(__pfn_to_nid_pfn)); \
})
+#else
+#define pfn_to_nid(pfn) (0)
+#endif
#define early_pfn_valid(pfn) pfn_valid(pfn)
void sparse_init(void);
#define sparse_index_init(_sec, _nid) do {} while (0)
#endif /* CONFIG_SPARSEMEM */
-#ifdef CONFIG_NODES_SPAN_OTHER_NODES
-#define early_pfn_in_nid(pfn, nid) (early_pfn_to_nid(pfn) == (nid))
-#else
-#define early_pfn_in_nid(pfn, nid) (1)
-#endif
-
#ifndef early_pfn_valid
#define early_pfn_valid(pfn) (1)
#endif
git.samba.org / sfrench / cifs-2.6.git / blobdiff