fbdev: defio and Metronomefb

[sfrench/cifs-2.6.git] / drivers / video / Kconfig

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 7d86e9eae915a55a05757e8f2cc1cf2839140684..1bd5fb30237d97a8037e5cc795ec41f1fef03a9d 100644 (file)
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -553,6 +553,19 @@ config FB_BF54X_LQ043
        help
         This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD
 
+config FB_BFIN_T350MCQB
+       tristate "Varitronix COG-T350MCQB TFT LCD display (BF527 EZKIT)"
+       depends on FB && BLACKFIN
+       select BFIN_GPTIMERS
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
+       help
+        This is the framebuffer device driver for a Varitronix VL-PS-COG-T350MCQB-01 display TFT LCD
+        This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
+        It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
+
+
 config FB_STI
        tristate "HP STI frame buffer device support"
        depends on FB && PARISC
@@ -641,6 +654,17 @@ config FB_VESA
          You will get a boot time penguin logo at no additional cost. Please
          read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
 
+config FB_EFI
+       bool "EFI-based Framebuffer Support"
+       depends on (FB = y) && X86
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
+       help
+         This is the EFI frame buffer device driver. If the firmware on
+         your platform is UEFI2.0, select Y to add support for
+         Graphics Output Protocol for early console messages to appear.
+
 config FB_IMAC
        bool "Intel-based Macintosh Framebuffer Support"
        depends on (FB = y) && X86 && EFI
@@ -878,7 +902,7 @@ config FB_S1D13XXX
 
 config FB_ATMEL
        tristate "AT91/AT32 LCD Controller support"
-       depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || AVR32)
+       depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || AVR32)
        select FB_CFB_FILLRECT
        select FB_CFB_COPYAREA
        select FB_CFB_IMAGEBLIT
@@ -1869,6 +1893,20 @@ config FB_XILINX
          framebuffer. ML300 carries a 640*480 LCD display on the board,
          ML403 uses a standard DB15 VGA connector.
 
+config FB_METRONOME
+       tristate "Metronome display controller support"
+       depends on FB && ARCH_PXA && MMU
+       select FB_SYS_FILLRECT
+       select FB_SYS_COPYAREA
+       select FB_SYS_IMAGEBLIT
+       select FB_SYS_FOPS
+       select FB_DEFERRED_IO
+       help
+         This enables support for the Metronome display controller. Tested
+         with an E-Ink 800x600 display and Gumstix Connex through an AMLCD
+         interface. Please read <file:Documentation/fb/metronomefb.txt>
+         for more information.
+
 config FB_VIRTUAL
        tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
        depends on FB