#include <linux/init.h>
#include <linux/errno.h>
#include <linux/major.h>
-#include <linux/version.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/atomic.h>
#include "Epl.h"
#include "proc_fs.h"
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
- // remove ("make invisible") obsolete symbols for kernel versions 2.6
- // and higher
-#define MOD_INC_USE_COUNT
-#define MOD_DEC_USE_COUNT
-#define EXPORT_NO_SYMBOLS
-#else
-#error "This driver needs a 2.6.x kernel or higher"
-#endif
-
/***************************************************************************/
/* */
/* */
// TracePoint support for realtime-debugging
#ifdef _DBG_TRACE_POINTS_
-void PUBLIC TgtDbgSignalTracePoint(BYTE bTracePointNumber_p);
+void TgtDbgSignalTracePoint(u8 bTracePointNumber_p);
#define TGT_DBG_SIGNAL_TRACE_POINT(p) TgtDbgSignalTracePoint(p)
#else
#define TGT_DBG_SIGNAL_TRACE_POINT(p)
// modul globale vars
//---------------------------------------------------------------------------
-CONST BYTE abMacAddr[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+static const u8 abMacAddr[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
-BYTE bVarIn1_l;
-BYTE bVarOut1_l;
-BYTE bVarOut1Old_l;
-BYTE bModeSelect_l; // state of the pushbuttons to select the mode
-BYTE bSpeedSelect_l; // state of the pushbuttons to increase/decrease the speed
-BYTE bSpeedSelectOld_l; // old state of the pushbuttons
-DWORD dwLeds_l; // current state of all LEDs
-BYTE bLedsRow1_l; // current state of the LEDs in row 1
-BYTE bLedsRow2_l; // current state of the LEDs in row 2
-BYTE abSelect_l[3]; // pushbuttons from CNs
+static u8 bVarIn1_l;
+static u8 bVarOut1_l;
+static u8 bVarOut1Old_l;
+static u8 bModeSelect_l; // state of the pushbuttons to select the mode
+static u8 bSpeedSelect_l; // state of the pushbuttons to increase/decrease the speed
+static u8 bSpeedSelectOld_l; // old state of the pushbuttons
+static u32 dwLeds_l; // current state of all LEDs
+static u8 bLedsRow1_l; // current state of the LEDs in row 1
+static u8 bLedsRow2_l; // current state of the LEDs in row 2
+static u8 abSelect_l[3]; // pushbuttons from CNs
-DWORD dwMode_l; // current mode
-int iCurCycleCount_l; // current cycle count
-int iMaxCycleCount_l; // maximum cycle count (i.e. number of cycles until next light movement step)
-int iToggle; // indicates the light movement direction
+static u32 dwMode_l; // current mode
+static int iCurCycleCount_l; // current cycle count
+static int iMaxCycleCount_l; // maximum cycle count (i.e. number of cycles until next light movement step)
+static int iToggle; // indicates the light movement direction
-BYTE abDomain_l[3000];
+//static u8 abDomain_l[3000];
static wait_queue_head_t WaitQueueShutdown_g; // wait queue for tEplNmtEventSwitchOff
static atomic_t AtomicShutdown_g = ATOMIC_INIT(FALSE);
-static DWORD dw_le_CycleLen_g;
+static u32 dw_le_CycleLen_g;
static uint uiNodeId_g = EPL_C_ADR_INVALID;
module_param_named(nodeid, uiNodeId_g, uint, 0);
// this function prototype here. If you want to use more than one Epl
// instances then the function name of each object dictionary has to differ.
-tEplKernel PUBLIC EplObdInitRam(tEplObdInitParam MEM * pInitParam_p);
+tEplKernel EplObdInitRam(tEplObdInitParam *pInitParam_p);
-tEplKernel PUBLIC AppCbEvent(tEplApiEventType EventType_p, // IN: event type (enum)
- tEplApiEventArg * pEventArg_p, // IN: event argument (union)
- void GENERIC * pUserArg_p);
+tEplKernel AppCbEvent(tEplApiEventType EventType_p, // IN: event type (enum)
+ tEplApiEventArg *pEventArg_p, // IN: event argument (union)
+ void *pUserArg_p);
-tEplKernel PUBLIC AppCbSync(void);
+tEplKernel AppCbSync(void);
-static int __init EplLinInit(void);
-static void __exit EplLinExit(void);
//---------------------------------------------------------------------------
// Kernel Module specific Data Structures
//---------------------------------------------------------------------------
-EXPORT_NO_SYMBOLS;
-
//module_init(EplLinInit);
//module_exit(EplLinExit);
// State:
//
//---------------------------------------------------------------------------
+#if 0
static int __init EplLinInit(void)
{
tEplKernel EplRet;
EplApiInitParam.m_uiSizeOfStruct = sizeof(EplApiInitParam);
EPL_MEMCPY(EplApiInitParam.m_abMacAddress, abMacAddr,
sizeof(EplApiInitParam.m_abMacAddress));
-// EplApiInitParam.m_abMacAddress[5] = (BYTE) EplApiInitParam.m_uiNodeId;
+// EplApiInitParam.m_abMacAddress[5] = (u8) EplApiInitParam.m_uiNodeId;
EplApiInitParam.m_dwFeatureFlags = -1;
EplApiInitParam.m_dwCycleLen = uiCycleLen_g; // required for error detection
EplApiInitParam.m_uiIsochrTxMaxPayload = 100; // const
// configure IP address of virtual network interface
// for TCP/IP communication over the POWERLINK network
- sprintf(sBuffer, "%lu.%lu.%lu.%lu",
+ sprintf(sBuffer, "%u.%u.%u.%u",
(EplApiInitParam.m_dwIpAddress >> 24),
((EplApiInitParam.m_dwIpAddress >> 16) & 0xFF),
((EplApiInitParam.m_dwIpAddress >> 8) & 0xFF),
printk("EplLinProcFree(): 0x%X\n", EplRet);
}
-
+#endif
//=========================================================================//
// //
// P R I V A T E F U N C T I O N S //
//
//---------------------------------------------------------------------------
-tEplKernel PUBLIC AppCbEvent(tEplApiEventType EventType_p, // IN: event type (enum)
- tEplApiEventArg * pEventArg_p, // IN: event argument (union)
- void GENERIC * pUserArg_p)
+tEplKernel AppCbEvent(tEplApiEventType EventType_p, // IN: event type (enum)
+ tEplApiEventArg *pEventArg_p, // IN: event argument (union)
+ void *pUserArg_p)
{
tEplKernel EplRet = kEplSuccessful;
case kEplNmtGsResetCommunication:
{
- DWORD dwBuffer;
+ u32 dwBuffer;
// configure OD for MN in state ResetComm after reseting the OD
// TODO: setup your own network configuration here
case kEplEventSourceDllk:
{ // error occured within the data link layer (e.g. interrupt processing)
- // the DWORD argument contains the DLL state and the NMT event
- printk(" val=%lX\n",
+ // the u32 argument contains the DLL state and the NMT event
+ printk(" val=%X\n",
pEventArg_p->m_InternalError.
m_Arg.m_dwArg);
break;
//
//---------------------------------------------------------------------------
-tEplKernel PUBLIC AppCbSync(void)
+tEplKernel AppCbSync(void)
{
tEplKernel EplRet = kEplSuccessful;
bVarOut1Old_l = bVarOut1_l;
// set LEDs
-// printk("bVarIn = 0x%02X bVarOut = 0x%02X\n", (WORD) bVarIn_l, (WORD) bVarOut_l);
+// printk("bVarIn = 0x%02X bVarOut = 0x%02X\n", (u16) bVarIn_l, (u16) bVarOut_l);
}
if (uiNodeId_g != EPL_C_ADR_MN_DEF_NODE_ID) {
bVarIn1_l++;
git.samba.org / sfrench / cifs-2.6.git / blobdiff