defined(CONFIG_CPU_SUBTYPE_SH7709)
# define SCPCR 0xA4000116 /* 16 bit SCI and SCIF */
# define SCPDR 0xA4000136 /* 8 bit SCI and SCIF */
-# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
# define SCIF0 0xA4400000
# define SCIF2 0xA4410000
-# define SCSMR_Ir 0xA44A0000
-# define IRDA_SCIF SCIF0
# define SCPCR 0xA4000116
# define SCPDR 0xA4000136
-
-/* Set the clock source,
- * SCIF2 (0xA4410000) -> External clock, SCK pin used as clock input
- * SCIF0 (0xA4400000) -> Internal clock, SCK pin as serial clock output
- */
-# define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0
#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721) || \
defined(CONFIG_ARCH_SH73A0) || \
defined(CONFIG_ARCH_SH7367) || \
defined(CONFIG_ARCH_SH7377) || \
defined(CONFIG_ARCH_SH7372)
-# define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
# define PORT_PTCR 0xA405011EUL
# define PORT_PVCR 0xA4050122UL
# define SCIF_ORER 0x0200 /* overrun error bit */
# define SCSPTR1 0xFFE0001C /* 8 bit SCIF */
# define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
-# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \
defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
defined(CONFIG_CPU_SUBTYPE_SH7750S) || \
# define SCSPTR1 0xffe0001c /* 8 bit SCI */
# define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
-# define SCSCR_INIT(port) (((port)->type == PORT_SCI) ? \
- 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \
- 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ )
#elif defined(CONFIG_CPU_SUBTYPE_SH7760)
# define SCSPTR0 0xfe600024 /* 16 bit SCIF */
# define SCSPTR1 0xfe610024 /* 16 bit SCIF */
# define SCSPTR2 0xfe620024 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
-# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
# define SCSPTR0 0xA4400000 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
# define PACR 0xa4050100
# define PBCR 0xa4050102
-# define SCSCR_INIT(port) 0x3B
#elif defined(CONFIG_CPU_SUBTYPE_SH7343)
# define SCSPTR0 0xffe00010 /* 16 bit SCIF */
# define SCSPTR1 0xffe10010 /* 16 bit SCIF */
# define SCSPTR2 0xffe20010 /* 16 bit SCIF */
# define SCSPTR3 0xffe30010 /* 16 bit SCIF */
-# define SCSCR_INIT(port) 0x32 /* TIE=0,RIE=0,TE=1,RE=1,REIE=0,CKE=1 */
#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
# define PADR 0xA4050120
# define PSDR 0xA405013e
# define PWDR 0xA4050166
# define PSCR 0xA405011E
# define SCIF_ORER 0x0001 /* overrun error bit */
-# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SUBTYPE_SH7366)
# define SCPDR0 0xA405013E /* 16 bit SCIF0 PSDR */
# define SCSPTR0 SCPDR0
# define SCIF_ORER 0x0001 /* overrun error bit */
-# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
# define SCSPTR0 0xa4050160
# define SCSPTR1 0xa405013e
# define SCSPTR4 0xa4050128
# define SCSPTR5 0xa4050128
# define SCIF_ORER 0x0001 /* overrun error bit */
-# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
# define SCIF_ORER 0x0001 /* overrun error bit */
-# define SCSCR_INIT(port) ((port)->type == PORT_SCIFA ? \
- 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \
- 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ )
#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
# define SCSPTR2 0xffe80020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
-# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
-# define SCIF_BASE_ADDR 0x01030000
-# define SCIF_ADDR_SH5 PHYS_PERIPHERAL_BLOCK+SCIF_BASE_ADDR
# define SCIF_PTR2_OFFS 0x0000020
-# define SCIF_LSR2_OFFS 0x0000024
# define SCSPTR2 ((port->mapbase)+SCIF_PTR2_OFFS) /* 16 bit SCIF */
-# define SCLSR2 ((port->mapbase)+SCIF_LSR2_OFFS) /* 16 bit SCIF */
-# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0, TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_H83007) || defined(CONFIG_H83068)
-# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
# define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
#elif defined(CONFIG_H8S2678)
-# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
# define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
#elif defined(CONFIG_CPU_SUBTYPE_SH7757)
# define SCSPTR0 0xfe4b0020
# define SCSPTR1 0xfe4b0020
# define SCSPTR2 0xfe4b0020
# define SCIF_ORER 0x0001
-# define SCSCR_INIT(port) 0x38
# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
# define SCSPTR0 0xffe00024 /* 16 bit SCIF */
# define SCSPTR1 0xffe08024 /* 16 bit SCIF */
# define SCSPTR2 0xffe10020 /* 16 bit SCIF/IRDA */
# define SCIF_ORER 0x0001 /* overrun error bit */
-# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SUBTYPE_SH7770)
# define SCSPTR0 0xff923020 /* 16 bit SCIF */
# define SCSPTR1 0xff924020 /* 16 bit SCIF */
# define SCSPTR2 0xff925020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
-# define SCSCR_INIT(port) 0x3c /* TIE=0,RIE=0,TE=1,RE=1,REIE=1,cke=2 */
#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
# define SCSPTR0 0xffe00024 /* 16 bit SCIF */
# define SCSPTR1 0xffe10024 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* Overrun error bit */
-
-#if defined(CONFIG_SH_SH2007)
-/* TIE=0,RIE=0,TE=1,RE=1,REIE=1,CKE1=0 */
-# define SCSCR_INIT(port) 0x38
-#else
-/* TIE=0,RIE=0,TE=1,RE=1,REIE=1,CKE1=1 */
-# define SCSCR_INIT(port) 0x3a
-#endif
-
#elif defined(CONFIG_CPU_SUBTYPE_SH7785) || \
defined(CONFIG_CPU_SUBTYPE_SH7786)
# define SCSPTR0 0xffea0024 /* 16 bit SCIF */
# define SCSPTR4 0xffee0024 /* 16 bit SCIF */
# define SCSPTR5 0xffef0024 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* Overrun error bit */
-# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \
defined(CONFIG_CPU_SUBTYPE_SH7203) || \
defined(CONFIG_CPU_SUBTYPE_SH7206) || \
# define SCSPTR6 0xfffeB020 /* 16 bit SCIF */
# define SCSPTR7 0xfffeB820 /* 16 bit SCIF */
# endif
-# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SUBTYPE_SH7619)
# define SCSPTR0 0xf8400020 /* 16 bit SCIF */
# define SCSPTR1 0xf8410020 /* 16 bit SCIF */
# define SCSPTR2 0xf8420020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
-# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SUBTYPE_SHX3)
# define SCSPTR0 0xffc30020 /* 16 bit SCIF */
# define SCSPTR1 0xffc40020 /* 16 bit SCIF */
# define SCSPTR2 0xffc50020 /* 16 bit SCIF */
# define SCSPTR3 0xffc60020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* Overrun error bit */
-# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#else
# error CPU subtype not defined
#endif
-/* SCSCR */
-#define SCI_CTRL_FLAGS_TIE 0x80 /* all */
-#define SCI_CTRL_FLAGS_RIE 0x40 /* all */
-#define SCI_CTRL_FLAGS_TE 0x20 /* all */
-#define SCI_CTRL_FLAGS_RE 0x10 /* all */
-#if defined(CONFIG_CPU_SUBTYPE_SH7750) || \
- defined(CONFIG_CPU_SUBTYPE_SH7091) || \
- defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
- defined(CONFIG_CPU_SUBTYPE_SH7722) || \
- defined(CONFIG_CPU_SUBTYPE_SH7750S) || \
- defined(CONFIG_CPU_SUBTYPE_SH7751) || \
- defined(CONFIG_CPU_SUBTYPE_SH7751R) || \
- defined(CONFIG_CPU_SUBTYPE_SH7763) || \
- defined(CONFIG_CPU_SUBTYPE_SH7780) || \
- defined(CONFIG_CPU_SUBTYPE_SH7785) || \
- defined(CONFIG_CPU_SUBTYPE_SH7786) || \
- defined(CONFIG_CPU_SUBTYPE_SHX3)
-#define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */
-#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
-#define SCI_CTRL_FLAGS_REIE ((port)->type == PORT_SCIFA ? 0 : 8)
-#else
-#define SCI_CTRL_FLAGS_REIE 0
-#endif
-/* SCI_CTRL_FLAGS_MPIE 0x08 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
-/* SCI_CTRL_FLAGS_TEIE 0x04 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
-/* SCI_CTRL_FLAGS_CKE1 0x02 * all */
-/* SCI_CTRL_FLAGS_CKE0 0x01 * 7707 SCI/SCIF, 7708 SCI, 7709 SCI/SCIF, 7750 SCI */
-
/* SCxSR SCI */
#define SCI_TDRE 0x80 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
#define SCI_RDRF 0x40 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
/* SCFCR */
#define SCFCR_RFRST 0x0002
#define SCFCR_TFRST 0x0004
-#define SCFCR_TCRST 0x4000
#define SCFCR_MCE 0x0008
#define SCI_MAJOR 204
#define SCI_MINOR_START 8
-/* Generic serial flags */
-#define SCI_RX_THROTTLE 0x0000001
-
-#define SCI_MAGIC 0xbabeface
-
-/*
- * Events are used to schedule things to happen at timer-interrupt
- * time, instead of at rs interrupt time.
- */
-#define SCI_EVENT_WRITE_WAKEUP 0
-
#define SCI_IN(size, offset) \
if ((size) == 8) { \
return ioread8(port->membase + (offset)); \
SCIF_FNS(SCSMR, 0x00, 16)
SCIF_FNS(SCBRR, 0x04, 8)
SCIF_FNS(SCSCR, 0x08, 16)
-SCIF_FNS(SCTDSR, 0x0c, 8)
-SCIF_FNS(SCFER, 0x10, 16)
SCIF_FNS(SCxSR, 0x14, 16)
SCIF_FNS(SCFCR, 0x18, 16)
SCIF_FNS(SCFDR, 0x1c, 16)
SCIx_FNS(SCxSR, 0x14, 16, 0x10, 16)
SCIx_FNS(SCxRDR, 0x24, 8, 0x14, 8)
SCIx_FNS(SCSPTR, 0, 0, 0, 0)
-SCIF_FNS(SCTDSR, 0x0c, 8)
-SCIF_FNS(SCFER, 0x10, 16)
SCIF_FNS(SCFCR, 0x18, 16)
SCIF_FNS(SCFDR, 0x1c, 16)
SCIF_FNS(SCLSR, 0x24, 16)
#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
SCIF_FNS(SCFDR, 0, 0, 0x1C, 16)
SCIF_FNS(SCSPTR2, 0, 0, 0x20, 16)
-SCIF_FNS(SCLSR2, 0, 0, 0x24, 16)
SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16)
SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16)
SCIF_FNS(SCSPTR, 0, 0, 0x24, 16)
return 1;
}
#endif
-
-/*
- * Values for the BitRate Register (SCBRR)
- *
- * The values are actually divisors for a frequency which can
- * be internal to the SH3 (14.7456MHz) or derived from an external
- * clock source. This driver assumes the internal clock is used;
- * to support using an external clock source, config options or
- * possibly command-line options would need to be added.
- *
- * Also, to support speeds below 2400 (why?) the lower 2 bits of
- * the SCSMR register would also need to be set to non-zero values.
- *
- * -- Greg Banks 27Feb2000
- *
- * Answer: The SCBRR register is only eight bits, and the value in
- * it gets larger with lower baud rates. At around 2400 (depending on
- * the peripherial module clock) you run out of bits. However the
- * lower two bits of SCSMR allow the module clock to be divided down,
- * scaling the value which is needed in SCBRR.
- *
- * -- Stuart Menefy - 23 May 2000
- *
- * I meant, why would anyone bother with bitrates below 2400.
- *
- * -- Greg Banks - 7Jul2000
- *
- * You "speedist"! How will I use my 110bps ASR-33 teletype with paper
- * tape reader as a console!
- *
- * -- Mitch Davis - 15 Jul 2000
- */
-
-#if (defined(CONFIG_CPU_SUBTYPE_SH7780) || \
- defined(CONFIG_CPU_SUBTYPE_SH7785) || \
- defined(CONFIG_CPU_SUBTYPE_SH7786)) && \
- !defined(CONFIG_SH_SH2007)
-#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
- defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721) || \
- defined(CONFIG_ARCH_SH73A0) || \
- defined(CONFIG_ARCH_SH7367) || \
- defined(CONFIG_ARCH_SH7377) || \
- defined(CONFIG_ARCH_SH7372)
-#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
- defined(CONFIG_CPU_SUBTYPE_SH7724)
-static inline int scbrr_calc(struct uart_port *port, int bps, int clk)
-{
- if (port->type == PORT_SCIF)
- return (clk+16*bps)/(32*bps)-1;
- else
- return ((clk*2)+16*bps)/(16*bps)-1;
-}
-#define SCBRR_VALUE(bps, clk) scbrr_calc(port, bps, clk)
-#elif defined(__H8300H__) || defined(__H8300S__)
-#define SCBRR_VALUE(bps, clk) (((clk*1000/32)/bps)-1)
-#else /* Generic SH */
-#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1)
-#endif
git.samba.org / sfrench / cifs-2.6.git / blobdiff