#include <asm/irq.h>
#include <asm/uaccess.h>
-#undef DEBUG
-#ifdef DEBUG
-#define DPRINTK(x...) printk(x)
-#else
-#define DPRINTK(x...) do { } while (0)
-#endif
-
/*
* This is used to lock changes in serial line configuration.
*/
#define uart_console(port) (0)
#endif
-static void uart_change_speed(struct uart_state *state, struct termios *old_termios);
+static void uart_change_speed(struct uart_state *state, struct ktermios *old_termios);
static void uart_wait_until_sent(struct tty_struct *tty, int timeout);
static void uart_change_pm(struct uart_state *state, int pm_state);
* we're actually going to be using.
*/
unsigned int
-uart_get_baud_rate(struct uart_port *port, struct termios *termios,
- struct termios *old, unsigned int min, unsigned int max)
+uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old, unsigned int min, unsigned int max)
{
unsigned int try, baud, altbaud = 38400;
upf_t flags = port->flags & UPF_SPD_MASK;
EXPORT_SYMBOL(uart_get_divisor);
static void
-uart_change_speed(struct uart_state *state, struct termios *old_termios)
+uart_change_speed(struct uart_state *state, struct ktermios *old_termios)
{
struct tty_struct *tty = state->info->tty;
struct uart_port *port = state->port;
- struct termios *termios;
+ struct ktermios *termios;
/*
* If we have no tty, termios, or the port does not exist,
return;
}
- DPRINTK("uart_flush_buffer(%d) called\n", tty->index);
+ pr_debug("uart_flush_buffer(%d) called\n", tty->index);
spin_lock_irqsave(&port->lock, flags);
uart_circ_clear(&state->info->xmit);
*/
mutex_lock(&state->mutex);
- change_irq = new_serial.irq != port->irq;
+ change_irq = !(port->flags & UPF_FIXED_PORT)
+ && new_serial.irq != port->irq;
/*
* Since changing the 'type' of the port changes its resource
* allocations, we should treat type changes the same as
* IO port changes.
*/
- change_port = new_port != port->iobase ||
- (unsigned long)new_serial.iomem_base != port->mapbase ||
- new_serial.hub6 != port->hub6 ||
- new_serial.io_type != port->iotype ||
- new_serial.iomem_reg_shift != port->regshift ||
- new_serial.type != port->type;
+ change_port = !(port->flags & UPF_FIXED_PORT)
+ && (new_port != port->iobase ||
+ (unsigned long)new_serial.iomem_base != port->mapbase ||
+ new_serial.hub6 != port->hub6 ||
+ new_serial.io_type != port->iotype ||
+ new_serial.iomem_reg_shift != port->regshift ||
+ new_serial.type != port->type);
old_flags = port->flags;
new_flags = new_serial.flags;
* We failed anyway.
*/
retval = -EBUSY;
+ goto exit; // Added to return the correct error -Ram Gupta
}
}
- port->irq = new_serial.irq;
- port->uartclk = new_serial.baud_base * 16;
+ if (change_irq)
+ port->irq = new_serial.irq;
+ if (!(port->flags & UPF_FIXED_PORT))
+ port->uartclk = new_serial.baud_base * 16;
port->flags = (port->flags & ~UPF_CHANGE_MASK) |
(new_flags & UPF_CHANGE_MASK);
port->custom_divisor = new_serial.custom_divisor;
return ret;
}
-static void uart_set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void uart_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
struct uart_state *state = tty->driver_data;
unsigned long flags;
port = state->port;
- DPRINTK("uart_close(%d) called\n", port->line);
+ pr_debug("uart_close(%d) called\n", port->line);
mutex_lock(&state->mutex);
expire = jiffies + timeout;
- DPRINTK("uart_wait_until_sent(%d), jiffies=%lu, expire=%lu...\n",
+ pr_debug("uart_wait_until_sent(%d), jiffies=%lu, expire=%lu...\n",
port->line, jiffies, expire);
/*
struct uart_state *state = tty->driver_data;
BUG_ON(!kernel_locked());
- DPRINTK("uart_hangup(%d)\n", state->port->line);
+ pr_debug("uart_hangup(%d)\n", state->port->line);
mutex_lock(&state->mutex);
if (state->info && state->info->flags & UIF_NORMAL_ACTIVE) {
}
if (!state->info) {
- state->info = kmalloc(sizeof(struct uart_info), GFP_KERNEL);
+ state->info = kzalloc(sizeof(struct uart_info), GFP_KERNEL);
if (state->info) {
- memset(state->info, 0, sizeof(struct uart_info));
init_waitqueue_head(&state->info->open_wait);
init_waitqueue_head(&state->info->delta_msr_wait);
int retval, line = tty->index;
BUG_ON(!kernel_locked());
- DPRINTK("uart_open(%d) called\n", line);
+ pr_debug("uart_open(%d) called\n", line);
/*
* tty->driver->num won't change, so we won't fail here with
static int uart_line_info(char *buf, struct uart_driver *drv, int i)
{
struct uart_state *state = drv->state + i;
+ int pm_state;
struct uart_port *port = state->port;
char stat_buf[32];
unsigned int status;
- int ret;
+ int mmio, ret;
if (!port)
return 0;
+ mmio = port->iotype >= UPIO_MEM;
ret = sprintf(buf, "%d: uart:%s %s%08lX irq:%d",
port->line, uart_type(port),
- port->iotype == UPIO_MEM ? "mmio:0x" : "port:",
- port->iotype == UPIO_MEM ? port->mapbase :
- (unsigned long) port->iobase,
+ mmio ? "mmio:0x" : "port:",
+ mmio ? port->mapbase : (unsigned long) port->iobase,
port->irq);
if (port->type == PORT_UNKNOWN) {
if(capable(CAP_SYS_ADMIN))
{
+ mutex_lock(&state->mutex);
+ pm_state = state->pm_state;
+ if (pm_state)
+ uart_change_pm(state, 0);
spin_lock_irq(&port->lock);
status = port->ops->get_mctrl(port);
spin_unlock_irq(&port->lock);
+ if (pm_state)
+ uart_change_pm(state, pm_state);
+ mutex_unlock(&state->mutex);
ret += sprintf(buf + ret, " tx:%d rx:%d",
port->icount.tx, port->icount.rx);
uart_set_options(struct uart_port *port, struct console *co,
int baud, int parity, int bits, int flow)
{
- struct termios termios;
+ struct ktermios termios;
int i;
/*
spin_lock_init(&port->lock);
lockdep_set_class(&port->lock, &port_lock_key);
- memset(&termios, 0, sizeof(struct termios));
+ memset(&termios, 0, sizeof(struct ktermios));
termios.c_cflag = CREAD | HUPCL | CLOCAL;
if (state->info && state->info->flags & UIF_INITIALIZED) {
const struct uart_ops *ops = port->ops;
+ state->info->flags = (state->info->flags & ~UIF_INITIALIZED)
+ | UIF_SUSPENDED;
+
spin_lock_irq(&port->lock);
ops->stop_tx(port);
ops->set_mctrl(port, 0);
* Re-enable the console device after suspending.
*/
if (uart_console(port)) {
- struct termios termios;
+ struct ktermios termios;
/*
* First try to use the console cflag setting.
*/
- memset(&termios, 0, sizeof(struct termios));
+ memset(&termios, 0, sizeof(struct ktermios));
termios.c_cflag = port->cons->cflag;
/*
console_start(port->cons);
}
- if (state->info && state->info->flags & UIF_INITIALIZED) {
+ if (state->info && state->info->flags & UIF_SUSPENDED) {
const struct uart_ops *ops = port->ops;
int ret;
ops->set_mctrl(port, port->mctrl);
ops->start_tx(port);
spin_unlock_irq(&port->lock);
+ state->info->flags |= UIF_INITIALIZED;
} else {
/*
* Failed to resume - maybe hardware went away?
* Clear the "initialized" flag so we won't try
* to call the low level drivers shutdown method.
*/
- state->info->flags &= ~UIF_INITIALIZED;
uart_shutdown(state);
}
+
+ state->info->flags &= ~UIF_SUSPENDED;
}
mutex_unlock(&state->mutex);
case UPIO_MEM32:
case UPIO_AU:
case UPIO_TSI:
+ case UPIO_DWAPB:
snprintf(address, sizeof(address),
"MMIO 0x%lx", port->mapbase);
break;
uart_report_port(drv, port);
+ /* Power up port for set_mctrl() */
+ uart_change_pm(state, 0);
+
/*
* Ensure that the modem control lines are de-activated.
* We probably don't need a spinlock around this, but
}
}
-static struct tty_operations uart_ops = {
+static const struct tty_operations uart_ops = {
.open = uart_open,
.close = uart_close,
.write = uart_write,
* Maybe we should be using a slab cache for this, especially if
* we have a large number of ports to handle.
*/
- drv->state = kmalloc(sizeof(struct uart_state) * drv->nr, GFP_KERNEL);
+ drv->state = kzalloc(sizeof(struct uart_state) * drv->nr, GFP_KERNEL);
retval = -ENOMEM;
if (!drv->state)
goto out;
- memset(drv->state, 0, sizeof(struct uart_state) * drv->nr);
-
normal = alloc_tty_driver(drv->nr);
if (!normal)
goto out;
normal->subtype = SERIAL_TYPE_NORMAL;
normal->init_termios = tty_std_termios;
normal->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ normal->init_termios.c_ispeed = normal->init_termios.c_ospeed = 9600;
normal->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
normal->driver_state = drv;
tty_set_operations(normal, &uart_ops);
case UPIO_MEM32:
case UPIO_AU:
case UPIO_TSI:
+ case UPIO_DWAPB:
return (port1->mapbase == port2->mapbase);
}
return 0;
git.samba.org / sfrench / cifs-2.6.git / blobdiff