scsi: ufs: Remove unused device quirks

[sfrench/cifs-2.6.git] / drivers / scsi / ufs / ufs_quirks.h

diff --git a/drivers/scsi/ufs/ufs_quirks.h b/drivers/scsi/ufs/ufs_quirks.h
index 5d2dfdb41a6ffcc6c20a88189c070a3917d8d4e3..a9bbd34d6b160d1f73652b17e545106a4a97d05d 100644 (file)
--- a/drivers/scsi/ufs/ufs_quirks.h
+++ b/drivers/scsi/ufs/ufs_quirks.h
@@ -44,21 +44,6 @@ struct ufs_dev_fix {
        .quirk = (_quirk),                 \
 }
 
-/*
- * If UFS device is having issue in processing LCC (Line Control
- * Command) coming from UFS host controller then enable this quirk.
- * When this quirk is enabled, host controller driver should disable
- * the LCC transmission on UFS host controller (by clearing
- * TX_LCC_ENABLE attribute of host to 0).
- */
-#define UFS_DEVICE_QUIRK_BROKEN_LCC (1 << 0)
-
-/*
- * Some UFS devices don't need VCCQ rail for device operations. Enabling this
- * quirk for such devices will make sure that VCCQ rail is not voted.
- */
-#define UFS_DEVICE_NO_VCCQ (1 << 1)
-
 /*
  * Some vendor's UFS device sends back to back NACs for the DL data frames
  * causing the host controller to raise the DFES error status. Sometimes
@@ -84,13 +69,6 @@ struct ufs_dev_fix {
  */
 #define UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS (1 << 2)
 
-/*
- * Some UFS devices may not work properly after resume if the link was kept
- * in off state during suspend. Enabling this quirk will not allow the
- * link to be kept in off state during suspend.
- */
-#define UFS_DEVICE_QUIRK_NO_LINK_OFF   (1 << 3)
-
 /*
  * Few Toshiba UFS device models advertise RX_MIN_ACTIVATETIME_CAPABILITY as
  * 600us which may not be enough for reliable hibern8 exit hardware sequence
@@ -100,13 +78,6 @@ struct ufs_dev_fix {
  */
 #define UFS_DEVICE_QUIRK_PA_TACTIVATE  (1 << 4)
 
-/*
- * Some UFS memory devices may have really low read/write throughput in
- * FAST AUTO mode, enable this quirk to make sure that FAST AUTO mode is
- * never enabled for such devices.
- */
-#define UFS_DEVICE_NO_FASTAUTO         (1 << 5)
-
 /*
  * It seems some UFS devices may keep drawing more than sleep current
  * (atleast for 500us) from UFS rails (especially from VCCQ rail).