ICH5_PCS = 0x92, /* port control and status */
PIIX_SCC = 0x0A, /* sub-class code register */
- PIIX_FLAG_AHCI = (1 << 28), /* AHCI possible */
- PIIX_FLAG_CHECKINTR = (1 << 29), /* make sure PCI INTx enabled */
- PIIX_FLAG_COMBINED = (1 << 30), /* combined mode possible */
+ PIIX_FLAG_AHCI = (1 << 27), /* AHCI possible */
+ PIIX_FLAG_CHECKINTR = (1 << 28), /* make sure PCI INTx enabled */
+ PIIX_FLAG_COMBINED = (1 << 29), /* combined mode possible */
+ /* ICH6/7 use different scheme for map value */
+ PIIX_FLAG_COMBINED_ICH6 = PIIX_FLAG_COMBINED | (1 << 30),
/* combined mode. if set, PATA is channel 0.
* if clear, PATA is channel 1.
static int piix_init_one (struct pci_dev *pdev,
const struct pci_device_id *ent);
-static void piix_pata_phy_reset(struct ata_port *ap);
-static void piix_sata_phy_reset(struct ata_port *ap);
+static int piix_pata_probe_reset(struct ata_port *ap, unsigned int *classes);
+static int piix_sata_probe_reset(struct ata_port *ap, unsigned int *classes);
static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev);
static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev);
{ 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
{ 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
{ 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
+ { 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
+ { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
+ { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
{ } /* terminate list */
};
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
+ .eh_timed_out = ata_scsi_timed_out,
.eh_strategy_handler = ata_scsi_error,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
- .max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
- .phy_reset = piix_pata_phy_reset,
+ .probe_reset = piix_pata_probe_reset,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
- .phy_reset = piix_sata_phy_reset,
+ .probe_reset = piix_sata_probe_reset,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
/* ich5_pata */
{
.sht = &piix_sht,
- .host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST |
- PIIX_FLAG_CHECKINTR,
+ .host_flags = ATA_FLAG_SLAVE_POSS | PIIX_FLAG_CHECKINTR,
.pio_mask = 0x1f, /* pio0-4 */
#if 0
.mwdma_mask = 0x06, /* mwdma1-2 */
/* ich5_sata */
{
.sht = &piix_sht,
- .host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST |
- PIIX_FLAG_COMBINED | PIIX_FLAG_CHECKINTR,
+ .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED |
+ PIIX_FLAG_CHECKINTR,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 */
/* piix4_pata */
{
.sht = &piix_sht,
- .host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .host_flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
#if 0
.mwdma_mask = 0x06, /* mwdma1-2 */
/* ich6_sata */
{
.sht = &piix_sht,
- .host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST |
- PIIX_FLAG_COMBINED | PIIX_FLAG_CHECKINTR |
- ATA_FLAG_SLAVE_POSS,
+ .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 |
+ PIIX_FLAG_CHECKINTR | ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 */
/* ich6_sata_ahci */
{
.sht = &piix_sht,
- .host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST |
- PIIX_FLAG_COMBINED | PIIX_FLAG_CHECKINTR |
- ATA_FLAG_SLAVE_POSS | PIIX_FLAG_AHCI,
+ .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 |
+ PIIX_FLAG_CHECKINTR | ATA_FLAG_SLAVE_POSS |
+ PIIX_FLAG_AHCI,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 */
}
/**
- * piix_pata_phy_reset - Probe specified port on PATA host controller
- * @ap: Port to probe
+ * piix_pata_probeinit - probeinit for PATA host controller
+ * @ap: Target port
*
- * Probe PATA phy.
+ * Probeinit including cable detection.
*
* LOCKING:
* None (inherited from caller).
*/
+static void piix_pata_probeinit(struct ata_port *ap)
+{
+ piix_pata_cbl_detect(ap);
+ ata_std_probeinit(ap);
+}
-static void piix_pata_phy_reset(struct ata_port *ap)
+/**
+ * piix_pata_probe_reset - Perform reset on PATA port and classify
+ * @ap: Port to reset
+ * @classes: Resulting classes of attached devices
+ *
+ * Reset PATA phy and classify attached devices.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+static int piix_pata_probe_reset(struct ata_port *ap, unsigned int *classes)
{
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->hard_port_no])) {
- ata_port_disable(ap);
printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return;
+ return 0;
}
- piix_pata_cbl_detect(ap);
-
- ata_port_probe(ap);
-
- ata_bus_reset(ap);
+ return ata_drive_probe_reset(ap, piix_pata_probeinit,
+ ata_std_softreset, NULL,
+ ata_std_postreset, classes);
}
/**
int orig_mask, mask, i;
u8 pcs;
- mask = (PIIX_PORT_PRESENT << ap->hard_port_no) |
- (PIIX_PORT_ENABLED << ap->hard_port_no);
-
pci_read_config_byte(pdev, ICH5_PCS, &pcs);
orig_mask = (int) pcs & 0xff;
}
/**
- * piix_sata_phy_reset - Probe specified port on SATA host controller
- * @ap: Port to probe
+ * piix_sata_probe_reset - Perform reset on SATA port and classify
+ * @ap: Port to reset
+ * @classes: Resulting classes of attached devices
*
- * Probe SATA phy.
+ * Reset SATA phy and classify attached devices.
*
* LOCKING:
* None (inherited from caller).
*/
-
-static void piix_sata_phy_reset(struct ata_port *ap)
+static int piix_sata_probe_reset(struct ata_port *ap, unsigned int *classes)
{
if (!piix_sata_probe(ap)) {
- ata_port_disable(ap);
printk(KERN_INFO "ata%u: SATA port has no device.\n", ap->id);
- return;
+ return 0;
}
- ap->cbl = ATA_CBL_SATA;
-
- ata_port_probe(ap);
-
- ata_bus_reset(ap);
+ return ata_drive_probe_reset(ap, ata_std_probeinit,
+ ata_std_softreset, NULL,
+ ata_std_postreset, classes);
}
/**
/**
* piix_check_450nx_errata - Check for problem 450NX setup
+ * @ata_dev: the PCI device to check
*
* Check for the present of 450NX errata #19 and errata #25. If
* they are found return an error code so we can turn off DMA
struct ata_port_info *port_info[2];
unsigned int combined = 0;
unsigned int pata_chan = 0, sata_chan = 0;
+ unsigned long host_flags;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev,
port_info[0] = &piix_port_info[ent->driver_data];
port_info[1] = &piix_port_info[ent->driver_data];
- if (port_info[0]->host_flags & PIIX_FLAG_AHCI) {
+ host_flags = port_info[0]->host_flags;
+
+ if (host_flags & PIIX_FLAG_AHCI) {
u8 tmp;
pci_read_config_byte(pdev, PIIX_SCC, &tmp);
if (tmp == PIIX_AHCI_DEVICE) {
}
}
- if (port_info[0]->host_flags & PIIX_FLAG_COMBINED) {
+ if (host_flags & PIIX_FLAG_COMBINED) {
u8 tmp;
pci_read_config_byte(pdev, ICH5_PMR, &tmp);
- if (tmp & PIIX_COMB) {
- combined = 1;
- if (tmp & PIIX_COMB_PATA_P0)
+ if (host_flags & PIIX_FLAG_COMBINED_ICH6) {
+ switch (tmp & 0x3) {
+ case 0:
+ break;
+ case 1:
+ combined = 1;
sata_chan = 1;
- else
+ break;
+ case 2:
+ combined = 1;
pata_chan = 1;
+ break;
+ case 3:
+ dev_printk(KERN_WARNING, &pdev->dev,
+ "invalid MAP value %u\n", tmp);
+ break;
+ }
+ } else {
+ if (tmp & PIIX_COMB) {
+ combined = 1;
+ if (tmp & PIIX_COMB_PATA_P0)
+ sata_chan = 1;
+ else
+ pata_chan = 1;
+ }
}
}
* MSI is disabled (and it is disabled, as we don't use
* message-signalled interrupts currently).
*/
- if (port_info[0]->host_flags & PIIX_FLAG_CHECKINTR)
+ if (host_flags & PIIX_FLAG_CHECKINTR)
pci_intx(pdev, 1);
if (combined) {
git.samba.org / sfrench / cifs-2.6.git / blobdiff