#define PHASE_SR_TO_TCR(phase) ((phase) >> 2)
-/*
- * "Special" value for the (unsigned char) command tag, to indicate
- * I_T_L nexus instead of I_T_L_Q.
- */
-
-#define TAG_NONE 0xff
-
/*
* These are "special" values for the irq and dma_channel fields of the
* Scsi_Host structure
#define NO_IRQ 0
#endif
-#define FLAG_NO_DMA_FIXUP 1 /* No DMA errata workarounds */
+#define FLAG_DMA_FIXUP 1 /* Use DMA errata workarounds */
#define FLAG_NO_PSEUDO_DMA 8 /* Inhibit DMA */
#define FLAG_LATE_DMA_SETUP 32 /* Setup NCR before DMA H/W */
-#define FLAG_TAGGED_QUEUING 64 /* as X3T9.2 spelled it */
#define FLAG_TOSHIBA_DELAY 128 /* Allow for borken CD-ROMs */
-#ifdef SUPPORT_TAGS
-struct tag_alloc {
- DECLARE_BITMAP(allocated, MAX_TAGS);
- int nr_allocated;
- int queue_size;
-};
-#endif
-
struct NCR5380_hostdata {
NCR5380_implementation_fields; /* implementation specific */
struct Scsi_Host *host; /* Host backpointer */
unsigned char id_mask, id_higher_mask; /* 1 << id, all bits greater */
unsigned char busy[8]; /* index = target, bit = lun */
-#if defined(REAL_DMA) || defined(REAL_DMA_POLL)
int dma_len; /* requested length of DMA */
-#endif
unsigned char last_message; /* last message OUT */
struct scsi_cmnd *connected; /* currently connected cmnd */
struct scsi_cmnd *selecting; /* cmnd to be connected */
int read_overruns; /* number of bytes to cut from a
* transfer to handle chip overruns */
struct work_struct main_task;
-#ifdef SUPPORT_TAGS
- struct tag_alloc TagAlloc[8][8]; /* 8 targets and 8 LUNs */
-#endif
-#ifdef PSEUDO_DMA
- unsigned spin_max_r;
- unsigned spin_max_w;
-#endif
struct workqueue_struct *work_q;
unsigned long accesses_per_ms; /* chip register accesses per ms */
};
#define NCR5380_dprint_phase(flg, arg) do {} while (0)
#endif
-#if defined(AUTOPROBE_IRQ)
static int NCR5380_probe_irq(struct Scsi_Host *instance, int possible);
-#endif
static int NCR5380_init(struct Scsi_Host *instance, int flags);
static int NCR5380_maybe_reset_bus(struct Scsi_Host *);
static void NCR5380_exit(struct Scsi_Host *instance);
static void NCR5380_information_transfer(struct Scsi_Host *instance);
-#ifndef DONT_USE_INTR
static irqreturn_t NCR5380_intr(int irq, void *dev_id);
-#endif
static void NCR5380_main(struct work_struct *work);
static const char *NCR5380_info(struct Scsi_Host *instance);
static void NCR5380_reselect(struct Scsi_Host *instance);
static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *, struct scsi_cmnd *);
-#if defined(PSEUDO_DMA) || defined(REAL_DMA) || defined(REAL_DMA_POLL)
static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data);
-#endif
static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data);
+static int NCR5380_poll_politely(struct Scsi_Host *, int, int, int, int);
+static int NCR5380_poll_politely2(struct Scsi_Host *, int, int, int, int, int, int, int);
-#if (defined(REAL_DMA) || defined(REAL_DMA_POLL))
-
-#if defined(i386) || defined(__alpha__)
-
-/**
- * NCR5380_pc_dma_setup - setup ISA DMA
- * @instance: adapter to set up
- * @ptr: block to transfer (virtual address)
- * @count: number of bytes to transfer
- * @mode: DMA controller mode to use
- *
- * Program the DMA controller ready to perform an ISA DMA transfer
- * on this chip.
- *
- * Locks: takes and releases the ISA DMA lock.
- */
-
-static __inline__ int NCR5380_pc_dma_setup(struct Scsi_Host *instance, unsigned char *ptr, unsigned int count, unsigned char mode)
-{
- unsigned limit;
- unsigned long bus_addr = virt_to_bus(ptr);
- unsigned long flags;
-
- if (instance->dma_channel <= 3) {
- if (count > 65536)
- count = 65536;
- limit = 65536 - (bus_addr & 0xFFFF);
- } else {
- if (count > 65536 * 2)
- count = 65536 * 2;
- limit = 65536 * 2 - (bus_addr & 0x1FFFF);
- }
-
- if (count > limit)
- count = limit;
-
- if ((count & 1) || (bus_addr & 1))
- panic("scsi%d : attempted unaligned DMA transfer\n", instance->host_no);
-
- flags=claim_dma_lock();
- disable_dma(instance->dma_channel);
- clear_dma_ff(instance->dma_channel);
- set_dma_addr(instance->dma_channel, bus_addr);
- set_dma_count(instance->dma_channel, count);
- set_dma_mode(instance->dma_channel, mode);
- enable_dma(instance->dma_channel);
- release_dma_lock(flags);
-
- return count;
-}
-
-/**
- * NCR5380_pc_dma_write_setup - setup ISA DMA write
- * @instance: adapter to set up
- * @ptr: block to transfer (virtual address)
- * @count: number of bytes to transfer
- *
- * Program the DMA controller ready to perform an ISA DMA write to the
- * SCSI controller.
- *
- * Locks: called routines take and release the ISA DMA lock.
- */
-
-static __inline__ int NCR5380_pc_dma_write_setup(struct Scsi_Host *instance, unsigned char *src, unsigned int count)
-{
- return NCR5380_pc_dma_setup(instance, src, count, DMA_MODE_WRITE);
-}
-
-/**
- * NCR5380_pc_dma_read_setup - setup ISA DMA read
- * @instance: adapter to set up
- * @ptr: block to transfer (virtual address)
- * @count: number of bytes to transfer
- *
- * Program the DMA controller ready to perform an ISA DMA read from the
- * SCSI controller.
- *
- * Locks: called routines take and release the ISA DMA lock.
- */
-
-static __inline__ int NCR5380_pc_dma_read_setup(struct Scsi_Host *instance, unsigned char *src, unsigned int count)
-{
- return NCR5380_pc_dma_setup(instance, src, count, DMA_MODE_READ);
-}
-
-/**
- * NCR5380_pc_dma_residual - return bytes left
- * @instance: adapter
- *
- * Reports the number of bytes left over after the DMA was terminated.
- *
- * Locks: takes and releases the ISA DMA lock.
- */
-
-static __inline__ int NCR5380_pc_dma_residual(struct Scsi_Host *instance)
-{
- unsigned long flags;
- int tmp;
-
- flags = claim_dma_lock();
- clear_dma_ff(instance->dma_channel);
- tmp = get_dma_residue(instance->dma_channel);
- release_dma_lock(flags);
-
- return tmp;
-}
-#endif /* defined(i386) || defined(__alpha__) */
-#endif /* defined(REAL_DMA) */
#endif /* __KERNEL__ */
#endif /* NCR5380_H */
git.samba.org / sfrench / cifs-2.6.git / blobdiff