mwifiex: few more register offset entries for sdio card structure

[sfrench/cifs-2.6.git] / drivers / net / wireless / mwifiex / sdio.c

diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c
index ea8fc587e90ff5d7838179d0daa89eec1dac8cc3..a22e9a91f2f2d2d9bf0765641c5cb94c709f277b 100644 (file)
--- a/drivers/net/wireless/mwifiex/sdio.c
+++ b/drivers/net/wireless/mwifiex/sdio.c
@@ -448,28 +448,31 @@ static int mwifiex_pm_wakeup_card_complete(struct mwifiex_adapter *adapter)
 static int mwifiex_init_sdio_new_mode(struct mwifiex_adapter *adapter)
 {
        u8 reg;
+       struct sdio_mmc_card *card = adapter->card;
 
        adapter->ioport = MEM_PORT;
 
        /* enable sdio new mode */
-       if (mwifiex_read_reg(adapter, CARD_CONFIG_2_1_REG, &reg))
+       if (mwifiex_read_reg(adapter, card->reg->card_cfg_2_1_reg, &reg))
                return -1;
-       if (mwifiex_write_reg(adapter, CARD_CONFIG_2_1_REG,
+       if (mwifiex_write_reg(adapter, card->reg->card_cfg_2_1_reg,
                              reg | CMD53_NEW_MODE))
                return -1;
 
        /* Configure cmd port and enable reading rx length from the register */
-       if (mwifiex_read_reg(adapter, CMD_CONFIG_0, &reg))
+       if (mwifiex_read_reg(adapter, card->reg->cmd_cfg_0, &reg))
                return -1;
-       if (mwifiex_write_reg(adapter, CMD_CONFIG_0, reg | CMD_PORT_RD_LEN_EN))
+       if (mwifiex_write_reg(adapter, card->reg->cmd_cfg_0,
+                             reg | CMD_PORT_RD_LEN_EN))
                return -1;
 
        /* Enable Dnld/Upld ready auto reset for cmd port after cmd53 is
         * completed
         */
-       if (mwifiex_read_reg(adapter, CMD_CONFIG_1, &reg))
+       if (mwifiex_read_reg(adapter, card->reg->cmd_cfg_1, &reg))
                return -1;
-       if (mwifiex_write_reg(adapter, CMD_CONFIG_1, reg | CMD_PORT_AUTO_EN))
+       if (mwifiex_write_reg(adapter, card->reg->cmd_cfg_1,
+                             reg | CMD_PORT_AUTO_EN))
                return -1;
 
        return 0;
@@ -496,17 +499,17 @@ static int mwifiex_init_sdio_ioport(struct mwifiex_adapter *adapter)
        }
 
        /* Read the IO port */
-       if (!mwifiex_read_reg(adapter, IO_PORT_0_REG, &reg))
+       if (!mwifiex_read_reg(adapter, card->reg->io_port_0_reg, &reg))
                adapter->ioport |= (reg & 0xff);
        else
                return -1;
 
-       if (!mwifiex_read_reg(adapter, IO_PORT_1_REG, &reg))
+       if (!mwifiex_read_reg(adapter, card->reg->io_port_1_reg, &reg))
                adapter->ioport |= ((reg & 0xff) << 8);
        else
                return -1;
 
-       if (!mwifiex_read_reg(adapter, IO_PORT_2_REG, &reg))
+       if (!mwifiex_read_reg(adapter, card->reg->io_port_2_reg, &reg))
                adapter->ioport |= ((reg & 0xff) << 16);
        else
                return -1;
@@ -514,8 +517,8 @@ cont:
        pr_debug("info: SDIO FUNC1 IO port: %#x\n", adapter->ioport);
 
        /* Set Host interrupt reset to read to clear */
-       if (!mwifiex_read_reg(adapter, HOST_INT_RSR_REG, &reg))
-               mwifiex_write_reg(adapter, HOST_INT_RSR_REG,
+       if (!mwifiex_read_reg(adapter, card->reg->host_int_rsr_reg, &reg))
+               mwifiex_write_reg(adapter, card->reg->host_int_rsr_reg,
                                  reg | card->reg->sdio_int_mask);
        else
                return -1;
@@ -708,7 +711,7 @@ static void mwifiex_sdio_disable_host_int(struct mwifiex_adapter *adapter)
        struct sdio_func *func = card->func;
 
        sdio_claim_host(func);
-       mwifiex_write_reg_locked(func, HOST_INT_MASK_REG, 0);
+       mwifiex_write_reg_locked(func, card->reg->host_int_mask_reg, 0);
        sdio_release_irq(func);
        sdio_release_host(func);
 }
@@ -729,7 +732,7 @@ static void mwifiex_interrupt_status(struct mwifiex_adapter *adapter)
                return;
        }
 
-       sdio_ireg = card->mp_regs[HOST_INTSTATUS_REG];
+       sdio_ireg = card->mp_regs[card->reg->host_int_status_reg];
        if (sdio_ireg) {
                /*
                 * DN_LD_HOST_INT_STATUS and/or UP_LD_HOST_INT_STATUS
@@ -794,7 +797,7 @@ static int mwifiex_sdio_enable_host_int(struct mwifiex_adapter *adapter)
        }
 
        /* Simply write the mask to the register */
-       ret = mwifiex_write_reg_locked(func, HOST_INT_MASK_REG,
+       ret = mwifiex_write_reg_locked(func, card->reg->host_int_mask_reg,
                                       card->reg->host_int_enable);
        if (ret) {
                dev_err(adapter->dev, "enable host interrupt failed\n");
@@ -1039,7 +1042,6 @@ static int mwifiex_decode_rx_packet(struct mwifiex_adapter *adapter,
                                    struct sk_buff *skb, u32 upld_typ)
 {
        u8 *cmd_buf;
-       unsigned long flags;
        __le16 *curr_ptr = (__le16 *)skb->data;
        u16 pkt_len = le16_to_cpu(*curr_ptr);
 
@@ -1050,9 +1052,7 @@ static int mwifiex_decode_rx_packet(struct mwifiex_adapter *adapter,
        case MWIFIEX_TYPE_DATA:
                dev_dbg(adapter->dev, "info: --- Rx: Data packet ---\n");
                if (adapter->rx_work_enabled) {
-                       spin_lock_irqsave(&adapter->rx_q_lock, flags);
                        skb_queue_tail(&adapter->rx_data_q, skb);
-                       spin_unlock_irqrestore(&adapter->rx_q_lock, flags);
                        adapter->data_received = true;
                        atomic_inc(&adapter->rx_pending);
                } else {
@@ -1337,8 +1337,8 @@ static int mwifiex_process_int_status(struct mwifiex_adapter *adapter)
                u32 pkt_type;
 
                /* read the len of control packet */
-               rx_len = card->mp_regs[CMD_RD_LEN_1] << 8;
-               rx_len |= (u16) card->mp_regs[CMD_RD_LEN_0];
+               rx_len = card->mp_regs[reg->cmd_rd_len_1] << 8;
+               rx_len |= (u16)card->mp_regs[reg->cmd_rd_len_0];
                rx_blocks = DIV_ROUND_UP(rx_len, MWIFIEX_SDIO_BLOCK_SIZE);
                if (rx_len <= INTF_HEADER_LEN ||
                    (rx_blocks * MWIFIEX_SDIO_BLOCK_SIZE) >
@@ -1826,11 +1826,11 @@ static int mwifiex_init_sdio(struct mwifiex_adapter *adapter)
        sdio_set_drvdata(card->func, card);
 
        /*
-        * Read the HOST_INT_STATUS_REG for ACK the first interrupt got
+        * Read the host_int_status_reg for ACK the first interrupt got
         * from the bootloader. If we don't do this we get a interrupt
         * as soon as we register the irq.
         */
-       mwifiex_read_reg(adapter, HOST_INTSTATUS_REG, &sdio_ireg);
+       mwifiex_read_reg(adapter, card->reg->host_int_status_reg, &sdio_ireg);
 
        /* Get SDIO ioport */
        mwifiex_init_sdio_ioport(adapter);