#include "iwl-sta.h"
#include "iwl-agn-calib.h"
#include "iwl-agn.h"
+#include "iwl-agn-led.h"
/******************************************************************************
MODULE_VERSION(DRV_VERSION);
MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
MODULE_LICENSE("GPL");
-MODULE_ALIAS("iwl4965");
static int iwlagn_ant_coupling;
static bool iwlagn_bt_ch_announce = 1;
* Tell nic where to find circular buffer of Tx Frame Descriptors for
* given Tx queue, and enable the DMA channel used for that queue.
*
- * 4965 supports up to 16 Tx queues in DRAM, mapped to up to 8 Tx DMA
+ * supports up to 16 Tx queues in DRAM, mapped to up to 8 Tx DMA
* channels supported in hardware.
*/
int iwl_hw_tx_queue_init(struct iwl_priv *priv,
return 0;
}
-/******************************************************************************
- *
- * Generic RX handler implementations
- *
- ******************************************************************************/
-static void iwl_rx_reply_alive(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
-{
- struct iwl_rx_packet *pkt = rxb_addr(rxb);
- struct iwl_alive_resp *palive;
- struct delayed_work *pwork;
-
- palive = &pkt->u.alive_frame;
-
- IWL_DEBUG_INFO(priv, "Alive ucode status 0x%08X revision "
- "0x%01X 0x%01X\n",
- palive->is_valid, palive->ver_type,
- palive->ver_subtype);
-
- if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
- IWL_DEBUG_INFO(priv, "Initialization Alive received.\n");
- memcpy(&priv->card_alive_init,
- &pkt->u.alive_frame,
- sizeof(struct iwl_init_alive_resp));
- pwork = &priv->init_alive_start;
- } else {
- IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
- memcpy(&priv->card_alive, &pkt->u.alive_frame,
- sizeof(struct iwl_alive_resp));
- pwork = &priv->alive_start;
- }
-
- /* We delay the ALIVE response by 5ms to
- * give the HW RF Kill time to activate... */
- if (palive->is_valid == UCODE_VALID_OK)
- queue_delayed_work(priv->workqueue, pwork,
- msecs_to_jiffies(5));
- else
- IWL_WARN(priv, "uCode did not respond OK.\n");
-}
-
static void iwl_bg_beacon_update(struct work_struct *work)
{
struct iwl_priv *priv =
}
}
-static void iwl_rx_beacon_notif(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
-{
- struct iwl_rx_packet *pkt = rxb_addr(rxb);
- struct iwl4965_beacon_notif *beacon =
- (struct iwl4965_beacon_notif *)pkt->u.raw;
-#ifdef CONFIG_IWLWIFI_DEBUG
- u8 rate = iwl_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags);
-
- IWL_DEBUG_RX(priv, "beacon status %x retries %d iss %d "
- "tsf %d %d rate %d\n",
- le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK,
- beacon->beacon_notify_hdr.failure_frame,
- le32_to_cpu(beacon->ibss_mgr_status),
- le32_to_cpu(beacon->high_tsf),
- le32_to_cpu(beacon->low_tsf), rate);
-#endif
-
- priv->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status);
-
- if (!test_bit(STATUS_EXIT_PENDING, &priv->status))
- queue_work(priv->workqueue, &priv->beacon_update);
-}
-
-/* Handle notification from uCode that card's power state is changing
- * due to software, hardware, or critical temperature RFKILL */
-static void iwl_rx_card_state_notif(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
-{
- struct iwl_rx_packet *pkt = rxb_addr(rxb);
- u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
- unsigned long status = priv->status;
-
- IWL_DEBUG_RF_KILL(priv, "Card state received: HW:%s SW:%s CT:%s\n",
- (flags & HW_CARD_DISABLED) ? "Kill" : "On",
- (flags & SW_CARD_DISABLED) ? "Kill" : "On",
- (flags & CT_CARD_DISABLED) ?
- "Reached" : "Not reached");
-
- if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED |
- CT_CARD_DISABLED)) {
-
- iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
- CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
-
- iwl_write_direct32(priv, HBUS_TARG_MBX_C,
- HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
-
- if (!(flags & RXON_CARD_DISABLED)) {
- iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
- CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
- iwl_write_direct32(priv, HBUS_TARG_MBX_C,
- HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
- }
- if (flags & CT_CARD_DISABLED)
- iwl_tt_enter_ct_kill(priv);
- }
- if (!(flags & CT_CARD_DISABLED))
- iwl_tt_exit_ct_kill(priv);
-
- if (flags & HW_CARD_DISABLED)
- set_bit(STATUS_RF_KILL_HW, &priv->status);
- else
- clear_bit(STATUS_RF_KILL_HW, &priv->status);
-
-
- if (!(flags & RXON_CARD_DISABLED))
- iwl_scan_cancel(priv);
-
- if ((test_bit(STATUS_RF_KILL_HW, &status) !=
- test_bit(STATUS_RF_KILL_HW, &priv->status)))
- wiphy_rfkill_set_hw_state(priv->hw->wiphy,
- test_bit(STATUS_RF_KILL_HW, &priv->status));
- else
- wake_up_interruptible(&priv->wait_command_queue);
-}
-
static void iwl_bg_tx_flush(struct work_struct *work)
{
struct iwl_priv *priv =
}
}
-/**
- * iwl_setup_rx_handlers - Initialize Rx handler callbacks
- *
- * Setup the RX handlers for each of the reply types sent from the uCode
- * to the host.
- *
- * This function chains into the hardware specific files for them to setup
- * any hardware specific handlers as well.
- */
-static void iwl_setup_rx_handlers(struct iwl_priv *priv)
-{
- priv->rx_handlers[REPLY_ALIVE] = iwl_rx_reply_alive;
- priv->rx_handlers[REPLY_ERROR] = iwl_rx_reply_error;
- priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl_rx_csa;
- priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] =
- iwl_rx_spectrum_measure_notif;
- priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl_rx_pm_sleep_notif;
- priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] =
- iwl_rx_pm_debug_statistics_notif;
- priv->rx_handlers[BEACON_NOTIFICATION] = iwl_rx_beacon_notif;
-
- /*
- * The same handler is used for both the REPLY to a discrete
- * statistics request from the host as well as for the periodic
- * statistics notifications (after received beacons) from the uCode.
- */
- priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl_reply_statistics;
- priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl_rx_statistics;
-
- iwl_setup_rx_scan_handlers(priv);
-
- /* status change handler */
- priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl_rx_card_state_notif;
-
- priv->rx_handlers[MISSED_BEACONS_NOTIFICATION] =
- iwl_rx_missed_beacon_notif;
- /* Rx handlers */
- priv->rx_handlers[REPLY_RX_PHY_CMD] = iwlagn_rx_reply_rx_phy;
- priv->rx_handlers[REPLY_RX_MPDU_CMD] = iwlagn_rx_reply_rx;
- /* block ack */
- priv->rx_handlers[REPLY_COMPRESSED_BA] = iwlagn_rx_reply_compressed_ba;
- /* Set up hardware specific Rx handlers */
- priv->cfg->ops->lib->rx_handler_setup(priv);
-}
-
/**
* iwl_rx_handle - Main entry function for receiving responses from uCode
*
* the appropriate handlers, including command responses,
* frame-received notifications, and other notifications.
*/
-void iwl_rx_handle(struct iwl_priv *priv)
+static void iwl_rx_handle(struct iwl_priv *priv)
{
struct iwl_rx_mem_buffer *rxb;
struct iwl_rx_packet *pkt;
(pkt->hdr.cmd != STATISTICS_NOTIFICATION) &&
(pkt->hdr.cmd != REPLY_TX);
+ /*
+ * Do the notification wait before RX handlers so
+ * even if the RX handler consumes the RXB we have
+ * access to it in the notification wait entry.
+ */
+ if (!list_empty(&priv->_agn.notif_waits)) {
+ struct iwl_notification_wait *w;
+
+ spin_lock(&priv->_agn.notif_wait_lock);
+ list_for_each_entry(w, &priv->_agn.notif_waits, list) {
+ if (w->cmd == pkt->hdr.cmd) {
+ w->triggered = true;
+ if (w->fn)
+ w->fn(priv, pkt);
+ }
+ }
+ spin_unlock(&priv->_agn.notif_wait_lock);
+
+ wake_up_all(&priv->_agn.notif_waitq);
+ }
+
/* Based on type of command response or notification,
* handle those that need handling via function in
* rx_handlers table. See iwl_setup_rx_handlers() */
tasklet_kill(&priv->irq_tasklet);
}
-static void iwl_irq_tasklet_legacy(struct iwl_priv *priv)
-{
- u32 inta, handled = 0;
- u32 inta_fh;
- unsigned long flags;
- u32 i;
-#ifdef CONFIG_IWLWIFI_DEBUG
- u32 inta_mask;
-#endif
-
- spin_lock_irqsave(&priv->lock, flags);
-
- /* Ack/clear/reset pending uCode interrupts.
- * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
- * and will clear only when CSR_FH_INT_STATUS gets cleared. */
- inta = iwl_read32(priv, CSR_INT);
- iwl_write32(priv, CSR_INT, inta);
-
- /* Ack/clear/reset pending flow-handler (DMA) interrupts.
- * Any new interrupts that happen after this, either while we're
- * in this tasklet, or later, will show up in next ISR/tasklet. */
- inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
- iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh);
-
-#ifdef CONFIG_IWLWIFI_DEBUG
- if (iwl_get_debug_level(priv) & IWL_DL_ISR) {
- /* just for debug */
- inta_mask = iwl_read32(priv, CSR_INT_MASK);
- IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
- inta, inta_mask, inta_fh);
- }
-#endif
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
- /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
- * atomic, make sure that inta covers all the interrupts that
- * we've discovered, even if FH interrupt came in just after
- * reading CSR_INT. */
- if (inta_fh & CSR49_FH_INT_RX_MASK)
- inta |= CSR_INT_BIT_FH_RX;
- if (inta_fh & CSR49_FH_INT_TX_MASK)
- inta |= CSR_INT_BIT_FH_TX;
-
- /* Now service all interrupt bits discovered above. */
- if (inta & CSR_INT_BIT_HW_ERR) {
- IWL_ERR(priv, "Hardware error detected. Restarting.\n");
-
- /* Tell the device to stop sending interrupts */
- iwl_disable_interrupts(priv);
-
- priv->isr_stats.hw++;
- iwl_irq_handle_error(priv);
-
- handled |= CSR_INT_BIT_HW_ERR;
-
- return;
- }
-
-#ifdef CONFIG_IWLWIFI_DEBUG
- if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
- /* NIC fires this, but we don't use it, redundant with WAKEUP */
- if (inta & CSR_INT_BIT_SCD) {
- IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
- "the frame/frames.\n");
- priv->isr_stats.sch++;
- }
-
- /* Alive notification via Rx interrupt will do the real work */
- if (inta & CSR_INT_BIT_ALIVE) {
- IWL_DEBUG_ISR(priv, "Alive interrupt\n");
- priv->isr_stats.alive++;
- }
- }
-#endif
- /* Safely ignore these bits for debug checks below */
- inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
-
- /* HW RF KILL switch toggled */
- if (inta & CSR_INT_BIT_RF_KILL) {
- int hw_rf_kill = 0;
- if (!(iwl_read32(priv, CSR_GP_CNTRL) &
- CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
- hw_rf_kill = 1;
-
- IWL_WARN(priv, "RF_KILL bit toggled to %s.\n",
- hw_rf_kill ? "disable radio" : "enable radio");
-
- priv->isr_stats.rfkill++;
-
- /* driver only loads ucode once setting the interface up.
- * the driver allows loading the ucode even if the radio
- * is killed. Hence update the killswitch state here. The
- * rfkill handler will care about restarting if needed.
- */
- if (!test_bit(STATUS_ALIVE, &priv->status)) {
- if (hw_rf_kill)
- set_bit(STATUS_RF_KILL_HW, &priv->status);
- else
- clear_bit(STATUS_RF_KILL_HW, &priv->status);
- wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rf_kill);
- }
-
- handled |= CSR_INT_BIT_RF_KILL;
- }
-
- /* Chip got too hot and stopped itself */
- if (inta & CSR_INT_BIT_CT_KILL) {
- IWL_ERR(priv, "Microcode CT kill error detected.\n");
- priv->isr_stats.ctkill++;
- handled |= CSR_INT_BIT_CT_KILL;
- }
-
- /* Error detected by uCode */
- if (inta & CSR_INT_BIT_SW_ERR) {
- IWL_ERR(priv, "Microcode SW error detected. "
- " Restarting 0x%X.\n", inta);
- priv->isr_stats.sw++;
- iwl_irq_handle_error(priv);
- handled |= CSR_INT_BIT_SW_ERR;
- }
-
- /*
- * uCode wakes up after power-down sleep.
- * Tell device about any new tx or host commands enqueued,
- * and about any Rx buffers made available while asleep.
- */
- if (inta & CSR_INT_BIT_WAKEUP) {
- IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
- iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
- for (i = 0; i < priv->hw_params.max_txq_num; i++)
- iwl_txq_update_write_ptr(priv, &priv->txq[i]);
- priv->isr_stats.wakeup++;
- handled |= CSR_INT_BIT_WAKEUP;
- }
-
- /* All uCode command responses, including Tx command responses,
- * Rx "responses" (frame-received notification), and other
- * notifications from uCode come through here*/
- if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
- iwl_rx_handle(priv);
- priv->isr_stats.rx++;
- handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
- }
-
- /* This "Tx" DMA channel is used only for loading uCode */
- if (inta & CSR_INT_BIT_FH_TX) {
- IWL_DEBUG_ISR(priv, "uCode load interrupt\n");
- priv->isr_stats.tx++;
- handled |= CSR_INT_BIT_FH_TX;
- /* Wake up uCode load routine, now that load is complete */
- priv->ucode_write_complete = 1;
- wake_up_interruptible(&priv->wait_command_queue);
- }
-
- if (inta & ~handled) {
- IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
- priv->isr_stats.unhandled++;
- }
-
- if (inta & ~(priv->inta_mask)) {
- IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
- inta & ~priv->inta_mask);
- IWL_WARN(priv, " with FH_INT = 0x%08x\n", inta_fh);
- }
-
- /* Re-enable all interrupts */
- /* only Re-enable if disabled by irq */
- if (test_bit(STATUS_INT_ENABLED, &priv->status))
- iwl_enable_interrupts(priv);
-
-#ifdef CONFIG_IWLWIFI_DEBUG
- if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
- inta = iwl_read32(priv, CSR_INT);
- inta_mask = iwl_read32(priv, CSR_INT_MASK);
- inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
- IWL_DEBUG_ISR(priv, "End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
- "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
- }
-#endif
-}
-
/* tasklet for iwlagn interrupt */
static void iwl_irq_tasklet(struct iwl_priv *priv)
{
if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
iwl_write32(priv, CSR_FH_INT_STATUS,
- CSR49_FH_INT_RX_MASK);
+ CSR_FH_INT_RX_MASK);
}
if (inta & CSR_INT_BIT_RX_PERIODIC) {
handled |= CSR_INT_BIT_RX_PERIODIC;
/* This "Tx" DMA channel is used only for loading uCode */
if (inta & CSR_INT_BIT_FH_TX) {
- iwl_write32(priv, CSR_FH_INT_STATUS, CSR49_FH_INT_TX_MASK);
+ iwl_write32(priv, CSR_FH_INT_STATUS, CSR_FH_INT_TX_MASK);
IWL_DEBUG_ISR(priv, "uCode load interrupt\n");
priv->isr_stats.tx++;
handled |= CSR_INT_BIT_FH_TX;
/* only Re-enable if disabled by irq */
if (test_bit(STATUS_INT_ENABLED, &priv->status))
iwl_enable_interrupts(priv);
+ /* Re-enable RF_KILL if it occurred */
+ else if (handled & CSR_INT_BIT_RF_KILL)
+ iwl_enable_rfkill_int(priv);
}
-/* the threshold ratio of actual_ack_cnt to expected_ack_cnt in percent */
-#define ACK_CNT_RATIO (50)
-#define BA_TIMEOUT_CNT (5)
-#define BA_TIMEOUT_MAX (16)
-
-/**
- * iwl_good_ack_health - checks for ACK count ratios, BA timeout retries.
- *
- * When the ACK count ratio is 0 and aggregated BA timeout retries exceeding
- * the BA_TIMEOUT_MAX, reload firmware and bring system back to normal
- * operation state.
- */
-bool iwl_good_ack_health(struct iwl_priv *priv,
- struct iwl_rx_packet *pkt)
-{
- bool rc = true;
- int actual_ack_cnt_delta, expected_ack_cnt_delta;
- int ba_timeout_delta;
-
- actual_ack_cnt_delta =
- le32_to_cpu(pkt->u.stats.tx.actual_ack_cnt) -
- le32_to_cpu(priv->_agn.statistics.tx.actual_ack_cnt);
- expected_ack_cnt_delta =
- le32_to_cpu(pkt->u.stats.tx.expected_ack_cnt) -
- le32_to_cpu(priv->_agn.statistics.tx.expected_ack_cnt);
- ba_timeout_delta =
- le32_to_cpu(pkt->u.stats.tx.agg.ba_timeout) -
- le32_to_cpu(priv->_agn.statistics.tx.agg.ba_timeout);
- if ((priv->_agn.agg_tids_count > 0) &&
- (expected_ack_cnt_delta > 0) &&
- (((actual_ack_cnt_delta * 100) / expected_ack_cnt_delta)
- < ACK_CNT_RATIO) &&
- (ba_timeout_delta > BA_TIMEOUT_CNT)) {
- IWL_DEBUG_RADIO(priv, "actual_ack_cnt delta = %d,"
- " expected_ack_cnt = %d\n",
- actual_ack_cnt_delta, expected_ack_cnt_delta);
-
-#ifdef CONFIG_IWLWIFI_DEBUGFS
- /*
- * This is ifdef'ed on DEBUGFS because otherwise the
- * statistics aren't available. If DEBUGFS is set but
- * DEBUG is not, these will just compile out.
- */
- IWL_DEBUG_RADIO(priv, "rx_detected_cnt delta = %d\n",
- priv->_agn.delta_statistics.tx.rx_detected_cnt);
- IWL_DEBUG_RADIO(priv,
- "ack_or_ba_timeout_collision delta = %d\n",
- priv->_agn.delta_statistics.tx.
- ack_or_ba_timeout_collision);
-#endif
- IWL_DEBUG_RADIO(priv, "agg ba_timeout delta = %d\n",
- ba_timeout_delta);
- if (!actual_ack_cnt_delta &&
- (ba_timeout_delta >= BA_TIMEOUT_MAX))
- rc = false;
- }
- return rc;
-}
-
-
/*****************************************************************************
*
* sysfs attributes
switch (api_ver) {
default:
- /*
- * 4965 doesn't revision the firmware file format
- * along with the API version, it always uses v1
- * file format.
- */
- if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) !=
- CSR_HW_REV_TYPE_4965) {
- hdr_size = 28;
- if (ucode_raw->size < hdr_size) {
- IWL_ERR(priv, "File size too small!\n");
- return -EINVAL;
- }
- pieces->build = le32_to_cpu(ucode->u.v2.build);
- pieces->inst_size = le32_to_cpu(ucode->u.v2.inst_size);
- pieces->data_size = le32_to_cpu(ucode->u.v2.data_size);
- pieces->init_size = le32_to_cpu(ucode->u.v2.init_size);
- pieces->init_data_size = le32_to_cpu(ucode->u.v2.init_data_size);
- pieces->boot_size = le32_to_cpu(ucode->u.v2.boot_size);
- src = ucode->u.v2.data;
- break;
+ hdr_size = 28;
+ if (ucode_raw->size < hdr_size) {
+ IWL_ERR(priv, "File size too small!\n");
+ return -EINVAL;
}
- /* fall through for 4965 */
+ pieces->build = le32_to_cpu(ucode->u.v2.build);
+ pieces->inst_size = le32_to_cpu(ucode->u.v2.inst_size);
+ pieces->data_size = le32_to_cpu(ucode->u.v2.data_size);
+ pieces->init_size = le32_to_cpu(ucode->u.v2.init_size);
+ pieces->init_data_size = le32_to_cpu(ucode->u.v2.init_data_size);
+ pieces->boot_size = le32_to_cpu(ucode->u.v2.boot_size);
+ src = ucode->u.v2.data;
+ break;
case 0:
case 1:
case 2:
IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
- if (priv->card_alive.is_valid != UCODE_VALID_OK) {
- /* We had an error bringing up the hardware, so take it
- * all the way back down so we can try again */
- IWL_DEBUG_INFO(priv, "Alive failed.\n");
- goto restart;
- }
-
/* Initialize uCode has loaded Runtime uCode ... verify inst image.
* This is a paranoid check, because we would not have gotten the
* "runtime" alive if code weren't properly loaded. */
priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
}
- if (priv->cfg->bt_params &&
- !priv->cfg->bt_params->advanced_bt_coexist) {
- /* Configure Bluetooth device coexistence support */
+ if (!priv->cfg->bt_params || (priv->cfg->bt_params &&
+ !priv->cfg->bt_params->advanced_bt_coexist)) {
+ /*
+ * default is 2-wire BT coexexistence support
+ */
priv->cfg->ops->hcmd->send_bt_config(priv);
}
/* At this point, the NIC is initialized and operational */
iwl_rf_kill_ct_config(priv);
- iwl_leds_init(priv);
-
IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
wake_up_interruptible(&priv->wait_command_queue);
static void __iwl_down(struct iwl_priv *priv)
{
unsigned long flags;
- int exit_pending = test_bit(STATUS_EXIT_PENDING, &priv->status);
+ int exit_pending;
IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n");
priv->cfg->bt_params->bt_init_traffic_load;
else
priv->bt_traffic_load = 0;
- priv->bt_sco_active = false;
priv->bt_full_concurrent = false;
priv->bt_ci_compliance = 0;
}
if (priv->start_calib) {
- if (priv->cfg->bt_params &&
- priv->cfg->bt_params->bt_statistics) {
+ if (iwl_bt_statistics(priv)) {
iwl_chain_noise_calibration(priv,
(void *)&priv->_agn.statistics_bt);
iwl_sensitivity_calibration(priv,
if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) {
struct iwl_rxon_context *ctx;
- bool bt_sco, bt_full_concurrent;
+ bool bt_full_concurrent;
u8 bt_ci_compliance;
u8 bt_load;
u8 bt_status;
* re-configure the hw when we reconfigure the BT
* command.
*/
- bt_sco = priv->bt_sco_active;
bt_full_concurrent = priv->bt_full_concurrent;
bt_ci_compliance = priv->bt_ci_compliance;
bt_load = priv->bt_traffic_load;
__iwl_down(priv);
- priv->bt_sco_active = bt_sco;
priv->bt_full_concurrent = bt_full_concurrent;
priv->bt_ci_compliance = bt_ci_compliance;
priv->bt_traffic_load = bt_load;
mutex_unlock(&priv->mutex);
}
+static int iwl_mac_offchannel_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
+ struct ieee80211_channel *chan,
+ enum nl80211_channel_type channel_type,
+ unsigned int wait)
+{
+ struct iwl_priv *priv = hw->priv;
+ int ret;
+
+ /* Not supported if we don't have PAN */
+ if (!(priv->valid_contexts & BIT(IWL_RXON_CTX_PAN))) {
+ ret = -EOPNOTSUPP;
+ goto free;
+ }
+
+ /* Not supported on pre-P2P firmware */
+ if (!(priv->contexts[IWL_RXON_CTX_PAN].interface_modes &
+ BIT(NL80211_IFTYPE_P2P_CLIENT))) {
+ ret = -EOPNOTSUPP;
+ goto free;
+ }
+
+ mutex_lock(&priv->mutex);
+
+ if (!priv->contexts[IWL_RXON_CTX_PAN].is_active) {
+ /*
+ * If the PAN context is free, use the normal
+ * way of doing remain-on-channel offload + TX.
+ */
+ ret = 1;
+ goto out;
+ }
+
+ /* TODO: queue up if scanning? */
+ if (test_bit(STATUS_SCANNING, &priv->status) ||
+ priv->_agn.offchan_tx_skb) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ /*
+ * max_scan_ie_len doesn't include the blank SSID or the header,
+ * so need to add that again here.
+ */
+ if (skb->len > hw->wiphy->max_scan_ie_len + 24 + 2) {
+ ret = -ENOBUFS;
+ goto out;
+ }
+
+ priv->_agn.offchan_tx_skb = skb;
+ priv->_agn.offchan_tx_timeout = wait;
+ priv->_agn.offchan_tx_chan = chan;
+
+ ret = iwl_scan_initiate(priv, priv->contexts[IWL_RXON_CTX_PAN].vif,
+ IWL_SCAN_OFFCH_TX, chan->band);
+ if (ret)
+ priv->_agn.offchan_tx_skb = NULL;
+ out:
+ mutex_unlock(&priv->mutex);
+ free:
+ if (ret < 0)
+ kfree_skb(skb);
+
+ return ret;
+}
+
+static int iwl_mac_offchannel_tx_cancel_wait(struct ieee80211_hw *hw)
+{
+ struct iwl_priv *priv = hw->priv;
+ int ret;
+
+ mutex_lock(&priv->mutex);
+
+ if (!priv->_agn.offchan_tx_skb) {
+ ret = -EINVAL;
+ goto unlock;
+ }
+
+ priv->_agn.offchan_tx_skb = NULL;
+
+ ret = iwl_scan_cancel_timeout(priv, 200);
+ if (ret)
+ ret = -EIO;
+unlock:
+ mutex_unlock(&priv->mutex);
+
+ return ret;
+}
+
/*****************************************************************************
*
* mac80211 entry point functions
IEEE80211_HW_SPECTRUM_MGMT |
IEEE80211_HW_REPORTS_TX_ACK_STATUS;
+ hw->max_tx_aggregation_subframes = LINK_QUAL_AGG_FRAME_LIMIT_DEF;
+
if (!priv->cfg->base_params->broken_powersave)
hw->flags |= IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
hw->wiphy->interface_modes |= ctx->exclusive_interface_modes;
}
+ hw->wiphy->max_remain_on_channel_duration = 1000;
+
hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY |
- WIPHY_FLAG_DISABLE_BEACON_HINTS;
+ WIPHY_FLAG_DISABLE_BEACON_HINTS |
+ WIPHY_FLAG_IBSS_RSN;
/*
* For now, disable PS by default because it affects
priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
&priv->bands[IEEE80211_BAND_5GHZ];
+ iwl_leds_init(priv);
+
ret = ieee80211_register_hw(priv->hw);
if (ret) {
IWL_ERR(priv, "Failed to register hw (error %d)\n", ret);
}
}
- iwl_led_start(priv);
+ iwlagn_led_enable(priv);
out:
priv->is_open = 1;
IWL_DEBUG_MAC80211(priv, "leave\n");
}
-int iwlagn_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+void iwlagn_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
{
struct iwl_priv *priv = hw->priv;
dev_kfree_skb_any(skb);
IWL_DEBUG_MACDUMP(priv, "leave\n");
- return NETDEV_TX_OK;
}
void iwlagn_mac_update_tkip_key(struct ieee80211_hw *hw,
return -EOPNOTSUPP;
}
+ /*
+ * To support IBSS RSN, don't program group keys in IBSS, the
+ * hardware will then not attempt to decrypt the frames.
+ */
+ if (vif->type == NL80211_IFTYPE_ADHOC &&
+ !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE))
+ return -EOPNOTSUPP;
+
sta_id = iwl_sta_id_or_broadcast(priv, vif_priv->ctx, sta);
if (sta_id == IWL_INVALID_STATION)
return -EINVAL;
int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
enum ieee80211_ampdu_mlme_action action,
- struct ieee80211_sta *sta, u16 tid, u16 *ssn)
+ struct ieee80211_sta *sta, u16 tid, u16 *ssn,
+ u8 buf_size)
{
struct iwl_priv *priv = hw->priv;
int ret = -EINVAL;
+ struct iwl_station_priv *sta_priv = (void *) sta->drv_priv;
IWL_DEBUG_HT(priv, "A-MPDU action on addr %pM tid %d\n",
sta->addr, tid);
}
break;
case IEEE80211_AMPDU_TX_OPERATIONAL:
+ buf_size = min_t(int, buf_size, LINK_QUAL_AGG_FRAME_LIMIT_DEF);
+
+ iwlagn_txq_agg_queue_setup(priv, sta, tid, buf_size);
+
+ /*
+ * If the limit is 0, then it wasn't initialised yet,
+ * use the default. We can do that since we take the
+ * minimum below, and we don't want to go above our
+ * default due to hardware restrictions.
+ */
+ if (sta_priv->max_agg_bufsize == 0)
+ sta_priv->max_agg_bufsize =
+ LINK_QUAL_AGG_FRAME_LIMIT_DEF;
+
+ /*
+ * Even though in theory the peer could have different
+ * aggregation reorder buffer sizes for different sessions,
+ * our ucode doesn't allow for that and has a global limit
+ * for each station. Therefore, use the minimum of all the
+ * aggregation sessions and our default value.
+ */
+ sta_priv->max_agg_bufsize =
+ min(sta_priv->max_agg_bufsize, buf_size);
+
if (priv->cfg->ht_params &&
priv->cfg->ht_params->use_rts_for_aggregation) {
- struct iwl_station_priv *sta_priv =
- (void *) sta->drv_priv;
-
/*
* switch to RTS/CTS if it is the prefer protection
* method for HT traffic
sta_priv->lq_sta.lq.general_params.flags |=
LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK;
- iwl_send_lq_cmd(priv, iwl_rxon_ctx_from_vif(vif),
- &sta_priv->lq_sta.lq, CMD_ASYNC, false);
}
+
+ sta_priv->lq_sta.lq.agg_params.agg_frame_cnt_limit =
+ sta_priv->max_agg_bufsize;
+
+ iwl_send_lq_cmd(priv, iwl_rxon_ctx_from_vif(vif),
+ &sta_priv->lq_sta.lq, CMD_ASYNC, false);
ret = 0;
break;
}
IWL_DEBUG_MAC80211(priv, "leave\n");
}
+static void iwlagn_disable_roc(struct iwl_priv *priv)
+{
+ struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_PAN];
+ struct ieee80211_channel *chan = ACCESS_ONCE(priv->hw->conf.channel);
+
+ lockdep_assert_held(&priv->mutex);
+
+ if (!ctx->is_active)
+ return;
+
+ ctx->staging.dev_type = RXON_DEV_TYPE_2STA;
+ ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+ iwl_set_rxon_channel(priv, chan, ctx);
+ iwl_set_flags_for_band(priv, ctx, chan->band, NULL);
+
+ priv->_agn.hw_roc_channel = NULL;
+
+ iwlcore_commit_rxon(priv, ctx);
+
+ ctx->is_active = false;
+}
+
+static void iwlagn_bg_roc_done(struct work_struct *work)
+{
+ struct iwl_priv *priv = container_of(work, struct iwl_priv,
+ _agn.hw_roc_work.work);
+
+ mutex_lock(&priv->mutex);
+ ieee80211_remain_on_channel_expired(priv->hw);
+ iwlagn_disable_roc(priv);
+ mutex_unlock(&priv->mutex);
+}
+
+static int iwl_mac_remain_on_channel(struct ieee80211_hw *hw,
+ struct ieee80211_channel *channel,
+ enum nl80211_channel_type channel_type,
+ int duration)
+{
+ struct iwl_priv *priv = hw->priv;
+ int err = 0;
+
+ if (!(priv->valid_contexts & BIT(IWL_RXON_CTX_PAN)))
+ return -EOPNOTSUPP;
+
+ if (!(priv->contexts[IWL_RXON_CTX_PAN].interface_modes &
+ BIT(NL80211_IFTYPE_P2P_CLIENT)))
+ return -EOPNOTSUPP;
+
+ mutex_lock(&priv->mutex);
+
+ if (priv->contexts[IWL_RXON_CTX_PAN].is_active ||
+ test_bit(STATUS_SCAN_HW, &priv->status)) {
+ err = -EBUSY;
+ goto out;
+ }
+
+ priv->contexts[IWL_RXON_CTX_PAN].is_active = true;
+ priv->_agn.hw_roc_channel = channel;
+ priv->_agn.hw_roc_chantype = channel_type;
+ priv->_agn.hw_roc_duration = DIV_ROUND_UP(duration * 1000, 1024);
+ iwlcore_commit_rxon(priv, &priv->contexts[IWL_RXON_CTX_PAN]);
+ queue_delayed_work(priv->workqueue, &priv->_agn.hw_roc_work,
+ msecs_to_jiffies(duration + 20));
+
+ msleep(IWL_MIN_SLOT_TIME); /* TU is almost ms */
+ ieee80211_ready_on_channel(priv->hw);
+
+ out:
+ mutex_unlock(&priv->mutex);
+
+ return err;
+}
+
+static int iwl_mac_cancel_remain_on_channel(struct ieee80211_hw *hw)
+{
+ struct iwl_priv *priv = hw->priv;
+
+ if (!(priv->valid_contexts & BIT(IWL_RXON_CTX_PAN)))
+ return -EOPNOTSUPP;
+
+ cancel_delayed_work_sync(&priv->_agn.hw_roc_work);
+
+ mutex_lock(&priv->mutex);
+ iwlagn_disable_roc(priv);
+ mutex_unlock(&priv->mutex);
+
+ return 0;
+}
+
/*****************************************************************************
*
* driver setup and teardown
INIT_WORK(&priv->bt_runtime_config, iwl_bg_bt_runtime_config);
INIT_DELAYED_WORK(&priv->init_alive_start, iwl_bg_init_alive_start);
INIT_DELAYED_WORK(&priv->alive_start, iwl_bg_alive_start);
+ INIT_DELAYED_WORK(&priv->_agn.hw_roc_work, iwlagn_bg_roc_done);
iwl_setup_scan_deferred_work(priv);
priv->watchdog.data = (unsigned long)priv;
priv->watchdog.function = iwl_bg_watchdog;
- if (!priv->cfg->base_params->use_isr_legacy)
- tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
- iwl_irq_tasklet, (unsigned long)priv);
- else
- tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
- iwl_irq_tasklet_legacy, (unsigned long)priv);
+ tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
+ iwl_irq_tasklet, (unsigned long)priv);
}
static void iwl_cancel_deferred_work(struct iwl_priv *priv)
priv->force_reset[IWL_FW_RESET].reset_duration =
IWL_DELAY_NEXT_FORCE_FW_RELOAD;
+ priv->rx_statistics_jiffies = jiffies;
+
/* Choose which receivers/antennas to use */
if (priv->cfg->ops->hcmd->set_rxon_chain)
priv->cfg->ops->hcmd->set_rxon_chain(priv,
kfree(priv->scan_cmd);
}
-#ifdef CONFIG_IWL5000
struct ieee80211_ops iwlagn_hw_ops = {
.tx = iwlagn_mac_tx,
.start = iwlagn_mac_start,
.channel_switch = iwlagn_mac_channel_switch,
.flush = iwlagn_mac_flush,
.tx_last_beacon = iwl_mac_tx_last_beacon,
+ .remain_on_channel = iwl_mac_remain_on_channel,
+ .cancel_remain_on_channel = iwl_mac_cancel_remain_on_channel,
+ .offchannel_tx = iwl_mac_offchannel_tx,
+ .offchannel_tx_cancel_wait = iwl_mac_offchannel_tx_cancel_wait,
};
-#endif
static void iwl_hw_detect(struct iwl_priv *priv)
{
priv->hw_rev = _iwl_read32(priv, CSR_HW_REV);
priv->hw_wa_rev = _iwl_read32(priv, CSR_HW_REV_WA_REG);
- pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &priv->rev_id);
+ priv->rev_id = priv->pci_dev->revision;
IWL_DEBUG_INFO(priv, "HW Revision ID = 0x%X\n", priv->rev_id);
}
* 1. Allocating HW data
************************/
- /* Disabling hardware scan means that mac80211 will perform scans
- * "the hard way", rather than using device's scan. */
- if (cfg->mod_params->disable_hw_scan) {
- dev_printk(KERN_DEBUG, &(pdev->dev),
- "sw scan support is deprecated\n");
-#ifdef CONFIG_IWL5000
- iwlagn_hw_ops.hw_scan = NULL;
-#endif
-#ifdef CONFIG_IWL4965
- iwl4965_hw_ops.hw_scan = NULL;
-#endif
- }
-
hw = iwl_alloc_all(cfg);
if (!hw) {
err = -ENOMEM;
priv->contexts[IWL_RXON_CTX_PAN].mcast_queue = IWL_IPAN_MCAST_QUEUE;
priv->contexts[IWL_RXON_CTX_PAN].interface_modes =
BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP);
+#ifdef CONFIG_IWL_P2P
+ priv->contexts[IWL_RXON_CTX_PAN].interface_modes |=
+ BIT(NL80211_IFTYPE_P2P_CLIENT) | BIT(NL80211_IFTYPE_P2P_GO);
+#endif
priv->contexts[IWL_RXON_CTX_PAN].ap_devtype = RXON_DEV_TYPE_CP;
priv->contexts[IWL_RXON_CTX_PAN].station_devtype = RXON_DEV_TYPE_2STA;
priv->contexts[IWL_RXON_CTX_PAN].unused_devtype = RXON_DEV_TYPE_P2P;
* we need to set STATUS_EXIT_PENDING bit.
*/
set_bit(STATUS_EXIT_PENDING, &priv->status);
+
+ iwl_leds_exit(priv);
+
if (priv->mac80211_registered) {
ieee80211_unregister_hw(priv->hw);
priv->mac80211_registered = 0;
/* Hardware specific file defines the PCI IDs table for that hardware module */
static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
-#ifdef CONFIG_IWL4965
- {IWL_PCI_DEVICE(0x4229, PCI_ANY_ID, iwl4965_agn_cfg)},
- {IWL_PCI_DEVICE(0x4230, PCI_ANY_ID, iwl4965_agn_cfg)},
-#endif /* CONFIG_IWL4965 */
-#ifdef CONFIG_IWL5000
-/* 5100 Series WiFi */
{IWL_PCI_DEVICE(0x4232, 0x1201, iwl5100_agn_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x4232, 0x1301, iwl5100_agn_cfg)}, /* Half Mini Card */
{IWL_PCI_DEVICE(0x4232, 0x1204, iwl5100_agn_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x0896, 0x5025, iwl130_bgn_cfg)},
{IWL_PCI_DEVICE(0x0896, 0x5027, iwl130_bg_cfg)},
-#endif /* CONFIG_IWL5000 */
+/* 2x00 Series */
+ {IWL_PCI_DEVICE(0x0890, 0x4022, iwl2000_2bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0891, 0x4222, iwl2000_2bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0890, 0x4422, iwl2000_2bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0890, 0x4026, iwl2000_2bg_cfg)},
+ {IWL_PCI_DEVICE(0x0891, 0x4226, iwl2000_2bg_cfg)},
+ {IWL_PCI_DEVICE(0x0890, 0x4426, iwl2000_2bg_cfg)},
+
+/* 2x30 Series */
+ {IWL_PCI_DEVICE(0x0887, 0x4062, iwl2030_2bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0888, 0x4262, iwl2030_2bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0887, 0x4462, iwl2030_2bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0887, 0x4066, iwl2030_2bg_cfg)},
+ {IWL_PCI_DEVICE(0x0888, 0x4266, iwl2030_2bg_cfg)},
+ {IWL_PCI_DEVICE(0x0887, 0x4466, iwl2030_2bg_cfg)},
+
+/* 6x35 Series */
+ {IWL_PCI_DEVICE(0x088E, 0x4060, iwl6035_2agn_cfg)},
+ {IWL_PCI_DEVICE(0x088F, 0x4260, iwl6035_2agn_cfg)},
+ {IWL_PCI_DEVICE(0x088E, 0x4460, iwl6035_2agn_cfg)},
+ {IWL_PCI_DEVICE(0x088E, 0x4064, iwl6035_2abg_cfg)},
+ {IWL_PCI_DEVICE(0x088F, 0x4264, iwl6035_2abg_cfg)},
+ {IWL_PCI_DEVICE(0x088E, 0x4464, iwl6035_2abg_cfg)},
+ {IWL_PCI_DEVICE(0x088E, 0x4066, iwl6035_2bg_cfg)},
+ {IWL_PCI_DEVICE(0x088F, 0x4266, iwl6035_2bg_cfg)},
+ {IWL_PCI_DEVICE(0x088E, 0x4466, iwl6035_2bg_cfg)},
+
+/* 200 Series */
+ {IWL_PCI_DEVICE(0x0894, 0x0022, iwl200_bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0895, 0x0222, iwl200_bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0894, 0x0422, iwl200_bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0894, 0x0026, iwl200_bg_cfg)},
+ {IWL_PCI_DEVICE(0x0895, 0x0226, iwl200_bg_cfg)},
+ {IWL_PCI_DEVICE(0x0894, 0x0426, iwl200_bg_cfg)},
+
+/* 230 Series */
+ {IWL_PCI_DEVICE(0x0892, 0x0062, iwl230_bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0893, 0x0262, iwl230_bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0892, 0x0462, iwl230_bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0892, 0x0066, iwl230_bg_cfg)},
+ {IWL_PCI_DEVICE(0x0893, 0x0266, iwl230_bg_cfg)},
+ {IWL_PCI_DEVICE(0x0892, 0x0466, iwl230_bg_cfg)},
{0}
};
module_init(iwl_init);
#ifdef CONFIG_IWLWIFI_DEBUG
-module_param_named(debug50, iwl_debug_level, uint, S_IRUGO);
-MODULE_PARM_DESC(debug50, "50XX debug output mask (deprecated)");
module_param_named(debug, iwl_debug_level, uint, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "debug output mask");
#endif
-module_param_named(swcrypto50, iwlagn_mod_params.sw_crypto, bool, S_IRUGO);
-MODULE_PARM_DESC(swcrypto50,
- "using crypto in software (default 0 [hardware]) (deprecated)");
module_param_named(swcrypto, iwlagn_mod_params.sw_crypto, int, S_IRUGO);
MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
-module_param_named(queues_num50,
- iwlagn_mod_params.num_of_queues, int, S_IRUGO);
-MODULE_PARM_DESC(queues_num50,
- "number of hw queues in 50xx series (deprecated)");
module_param_named(queues_num, iwlagn_mod_params.num_of_queues, int, S_IRUGO);
MODULE_PARM_DESC(queues_num, "number of hw queues.");
-module_param_named(11n_disable50, iwlagn_mod_params.disable_11n, int, S_IRUGO);
-MODULE_PARM_DESC(11n_disable50, "disable 50XX 11n functionality (deprecated)");
module_param_named(11n_disable, iwlagn_mod_params.disable_11n, int, S_IRUGO);
MODULE_PARM_DESC(11n_disable, "disable 11n functionality");
-module_param_named(amsdu_size_8K50, iwlagn_mod_params.amsdu_size_8K,
- int, S_IRUGO);
-MODULE_PARM_DESC(amsdu_size_8K50,
- "enable 8K amsdu size in 50XX series (deprecated)");
module_param_named(amsdu_size_8K, iwlagn_mod_params.amsdu_size_8K,
int, S_IRUGO);
MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
-module_param_named(fw_restart50, iwlagn_mod_params.restart_fw, int, S_IRUGO);
-MODULE_PARM_DESC(fw_restart50,
- "restart firmware in case of error (deprecated)");
module_param_named(fw_restart, iwlagn_mod_params.restart_fw, int, S_IRUGO);
MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
-module_param_named(
- disable_hw_scan, iwlagn_mod_params.disable_hw_scan, int, S_IRUGO);
-MODULE_PARM_DESC(disable_hw_scan,
- "disable hardware scanning (default 0) (deprecated)");
module_param_named(ucode_alternative, iwlagn_wanted_ucode_alternative, int,
S_IRUGO);
module_param_named(bt_ch_inhibition, iwlagn_bt_ch_announce, bool, S_IRUGO);
MODULE_PARM_DESC(bt_ch_inhibition,
"Disable BT channel inhibition (default: enable)");
+
+module_param_named(plcp_check, iwlagn_mod_params.plcp_check, bool, S_IRUGO);
+MODULE_PARM_DESC(plcp_check, "Check plcp health (default: 1 [enabled])");
+
+module_param_named(ack_check, iwlagn_mod_params.ack_check, bool, S_IRUGO);
+MODULE_PARM_DESC(ack_check, "Check ack health (default: 0 [disabled])");
git.samba.org / sfrench / cifs-2.6.git / blobdiff