* b: if a hw mac address already is there, eth0's hw mac address
* will then be set from bond0.
*
- * v0.1 - first working version.
- * v0.2 - changed stats to be calculated by summing slaves stats.
- *
- * Changes:
- * Arnaldo Carvalho de Melo <acme@conectiva.com.br>
- * - fix leaks on failure at bond_init
- *
- * 2000/09/30 - Willy Tarreau <willy at meta-x.org>
- * - added trivial code to release a slave device.
- * - fixed security bug (CAP_NET_ADMIN not checked)
- * - implemented MII link monitoring to disable dead links :
- * All MII capable slaves are checked every <miimon> milliseconds
- * (100 ms seems good). This value can be changed by passing it to
- * insmod. A value of zero disables the monitoring (default).
- * - fixed an infinite loop in bond_xmit_roundrobin() when there's no
- * good slave.
- * - made the code hopefully SMP safe
- *
- * 2000/10/03 - Willy Tarreau <willy at meta-x.org>
- * - optimized slave lists based on relevant suggestions from Thomas Davis
- * - implemented active-backup method to obtain HA with two switches:
- * stay as long as possible on the same active interface, while we
- * also monitor the backup one (MII link status) because we want to know
- * if we are able to switch at any time. ( pass "mode=1" to insmod )
- * - lots of stress testings because we need it to be more robust than the
- * wires ! :->
- *
- * 2000/10/09 - Willy Tarreau <willy at meta-x.org>
- * - added up and down delays after link state change.
- * - optimized the slaves chaining so that when we run forward, we never
- * repass through the bond itself, but we can find it by searching
- * backwards. Renders the deletion more difficult, but accelerates the
- * scan.
- * - smarter enslaving and releasing.
- * - finer and more robust SMP locking
- *
- * 2000/10/17 - Willy Tarreau <willy at meta-x.org>
- * - fixed two potential SMP race conditions
- *
- * 2000/10/18 - Willy Tarreau <willy at meta-x.org>
- * - small fixes to the monitoring FSM in case of zero delays
- * 2000/11/01 - Willy Tarreau <willy at meta-x.org>
- * - fixed first slave not automatically used in trunk mode.
- * 2000/11/10 : spelling of "EtherChannel" corrected.
- * 2000/11/13 : fixed a race condition in case of concurrent accesses to ioctl().
- * 2000/12/16 : fixed improper usage of rtnl_exlock_nowait().
- *
- * 2001/1/3 - Chad N. Tindel <ctindel at ieee dot org>
- * - The bonding driver now simulates MII status monitoring, just like
- * a normal network device. It will show that the link is down iff
- * every slave in the bond shows that their links are down. If at least
- * one slave is up, the bond's MII status will appear as up.
- *
- * 2001/2/7 - Chad N. Tindel <ctindel at ieee dot org>
- * - Applications can now query the bond from user space to get
- * information which may be useful. They do this by calling
- * the BOND_INFO_QUERY ioctl. Once the app knows how many slaves
- * are in the bond, it can call the BOND_SLAVE_INFO_QUERY ioctl to
- * get slave specific information (# link failures, etc). See
- * <linux/if_bonding.h> for more details. The structs of interest
- * are ifbond and ifslave.
- *
- * 2001/4/5 - Chad N. Tindel <ctindel at ieee dot org>
- * - Ported to 2.4 Kernel
- *
- * 2001/5/2 - Jeffrey E. Mast <jeff at mastfamily dot com>
- * - When a device is detached from a bond, the slave device is no longer
- * left thinking that is has a master.
- *
- * 2001/5/16 - Jeffrey E. Mast <jeff at mastfamily dot com>
- * - memset did not appropriately initialized the bond rw_locks. Used
- * rwlock_init to initialize to unlocked state to prevent deadlock when
- * first attempting a lock
- * - Called SET_MODULE_OWNER for bond device
- *
- * 2001/5/17 - Tim Anderson <tsa at mvista.com>
- * - 2 paths for releasing for slave release; 1 through ioctl
- * and 2) through close. Both paths need to release the same way.
- * - the free slave in bond release is changing slave status before
- * the free. The netdev_set_master() is intended to change slave state
- * so it should not be done as part of the release process.
- * - Simple rule for slave state at release: only the active in A/B and
- * only one in the trunked case.
- *
- * 2001/6/01 - Tim Anderson <tsa at mvista.com>
- * - Now call dev_close when releasing a slave so it doesn't screw up
- * out routing table.
- *
- * 2001/6/01 - Chad N. Tindel <ctindel at ieee dot org>
- * - Added /proc support for getting bond and slave information.
- * Information is in /proc/net/<bond device>/info.
- * - Changed the locking when calling bond_close to prevent deadlock.
- *
- * 2001/8/05 - Janice Girouard <girouard at us.ibm.com>
- * - correct problem where refcnt of slave is not incremented in bond_ioctl
- * so the system hangs when halting.
- * - correct locking problem when unable to malloc in bond_enslave.
- * - adding bond_xmit_xor logic.
- * - adding multiple bond device support.
- *
- * 2001/8/13 - Erik Habbinga <erik_habbinga at hp dot com>
- * - correct locking problem with rtnl_exlock_nowait
- *
- * 2001/8/23 - Janice Girouard <girouard at us.ibm.com>
- * - bzero initial dev_bonds, to correct oops
- * - convert SIOCDEVPRIVATE to new MII ioctl calls
- *
- * 2001/9/13 - Takao Indoh <indou dot takao at jp dot fujitsu dot com>
- * - Add the BOND_CHANGE_ACTIVE ioctl implementation
- *
- * 2001/9/14 - Mark Huth <mhuth at mvista dot com>
- * - Change MII_LINK_READY to not check for end of auto-negotiation,
- * but only for an up link.
- *
- * 2001/9/20 - Chad N. Tindel <ctindel at ieee dot org>
- * - Add the device field to bonding_t. Previously the net_device
- * corresponding to a bond wasn't available from the bonding_t
- * structure.
- *
- * 2001/9/25 - Janice Girouard <girouard at us.ibm.com>
- * - add arp_monitor for active backup mode
- *
- * 2001/10/23 - Takao Indoh <indou dot takao at jp dot fujitsu dot com>
- * - Various memory leak fixes
- *
- * 2001/11/5 - Mark Huth <mark dot huth at mvista dot com>
- * - Don't take rtnl lock in bond_mii_monitor as it deadlocks under
- * certain hotswap conditions.
- * Note: this same change may be required in bond_arp_monitor ???
- * - Remove possibility of calling bond_sethwaddr with NULL slave_dev ptr
- * - Handle hot swap ethernet interface deregistration events to remove
- * kernel oops following hot swap of enslaved interface
- *
- * 2002/1/2 - Chad N. Tindel <ctindel at ieee dot org>
- * - Restore original slave flags at release time.
- *
- * 2002/02/18 - Erik Habbinga <erik_habbinga at hp dot com>
- * - bond_release(): calling kfree on our_slave after call to
- * bond_restore_slave_flags, not before
- * - bond_enslave(): saving slave flags into original_flags before
- * call to netdev_set_master, so the IFF_SLAVE flag doesn't end
- * up in original_flags
- *
- * 2002/04/05 - Mark Smith <mark.smith at comdev dot cc> and
- * Steve Mead <steve.mead at comdev dot cc>
- * - Port Gleb Natapov's multicast support patchs from 2.4.12
- * to 2.4.18 adding support for multicast.
- *
- * 2002/06/10 - Tony Cureington <tony.cureington * hp_com>
- * - corrected uninitialized pointer (ifr.ifr_data) in bond_check_dev_link;
- * actually changed function to use MIIPHY, then MIIREG, and finally
- * ETHTOOL to determine the link status
- * - fixed bad ifr_data pointer assignments in bond_ioctl
- * - corrected mode 1 being reported as active-backup in bond_get_info;
- * also added text to distinguish type of load balancing (rr or xor)
- * - change arp_ip_target module param from "1-12s" (array of 12 ptrs)
- * to "s" (a single ptr)
- *
- * 2002/08/30 - Jay Vosburgh <fubar at us dot ibm dot com>
- * - Removed acquisition of xmit_lock in set_multicast_list; caused
- * deadlock on SMP (lock is held by caller).
- * - Revamped SIOCGMIIPHY, SIOCGMIIREG portion of bond_check_dev_link().
- *
- * 2002/09/18 - Jay Vosburgh <fubar at us dot ibm dot com>
- * - Fixed up bond_check_dev_link() (and callers): removed some magic
- * numbers, banished local MII_ defines, wrapped ioctl calls to
- * prevent EFAULT errors
- *
- * 2002/9/30 - Jay Vosburgh <fubar at us dot ibm dot com>
- * - make sure the ip target matches the arp_target before saving the
- * hw address.
- *
- * 2002/9/30 - Dan Eisner <eisner at 2robots dot com>
- * - make sure my_ip is set before taking down the link, since
- * not all switches respond if the source ip is not set.
- *
- * 2002/10/8 - Janice Girouard <girouard at us dot ibm dot com>
- * - read in the local ip address when enslaving a device
- * - add primary support
- * - make sure 2*arp_interval has passed when a new device
- * is brought on-line before taking it down.
- *
- * 2002/09/11 - Philippe De Muyter <phdm at macqel dot be>
- * - Added bond_xmit_broadcast logic.
- * - Added bond_mode() support function.
- *
- * 2002/10/26 - Laurent Deniel <laurent.deniel at free.fr>
- * - allow to register multicast addresses only on active slave
- * (useful in active-backup mode)
- * - add multicast module parameter
- * - fix deletion of multicast groups after unloading module
- *
- * 2002/11/06 - Kameshwara Rayaprolu <kameshwara.rao * wipro_com>
- * - Changes to prevent panic from closing the device twice; if we close
- * the device in bond_release, we must set the original_flags to down
- * so it won't be closed again by the network layer.
- *
- * 2002/11/07 - Tony Cureington <tony.cureington * hp_com>
- * - Fix arp_target_hw_addr memory leak
- * - Created activebackup_arp_monitor function to handle arp monitoring
- * in active backup mode - the bond_arp_monitor had several problems...
- * such as allowing slaves to tx arps sequentially without any delay
- * for a response
- * - Renamed bond_arp_monitor to loadbalance_arp_monitor and re-wrote
- * this function to just handle arp monitoring in load-balancing mode;
- * it is a lot more compact now
- * - Changes to ensure one and only one slave transmits in active-backup
- * mode
- * - Robustesize parameters; warn users about bad combinations of
- * parameters; also if miimon is specified and a network driver does
- * not support MII or ETHTOOL, inform the user of this
- * - Changes to support link_failure_count when in arp monitoring mode
- * - Fix up/down delay reported in /proc
- * - Added version; log version; make version available from "modinfo -d"
- * - Fixed problem in bond_check_dev_link - if the first IOCTL (SIOCGMIIPH)
- * failed, the ETHTOOL ioctl never got a chance
- *
- * 2002/11/16 - Laurent Deniel <laurent.deniel at free.fr>
- * - fix multicast handling in activebackup_arp_monitor
- * - remove one unnecessary and confusing curr_active_slave == slave test
- * in activebackup_arp_monitor
- *
- * 2002/11/17 - Laurent Deniel <laurent.deniel at free.fr>
- * - fix bond_slave_info_query when slave_id = num_slaves
- *
- * 2002/11/19 - Janice Girouard <girouard at us dot ibm dot com>
- * - correct ifr_data reference. Update ifr_data reference
- * to mii_ioctl_data struct values to avoid confusion.
- *
- * 2002/11/22 - Bert Barbe <bert.barbe at oracle dot com>
- * - Add support for multiple arp_ip_target
- *
- * 2002/12/13 - Jay Vosburgh <fubar at us dot ibm dot com>
- * - Changed to allow text strings for mode and multicast, e.g.,
- * insmod bonding mode=active-backup. The numbers still work.
- * One change: an invalid choice will cause module load failure,
- * rather than the previous behavior of just picking one.
- * - Minor cleanups; got rid of dup ctype stuff, atoi function
- *
- * 2003/02/07 - Jay Vosburgh <fubar at us dot ibm dot com>
- * - Added use_carrier module parameter that causes miimon to
- * use netif_carrier_ok() test instead of MII/ETHTOOL ioctls.
- * - Minor cleanups; consolidated ioctl calls to one function.
- *
- * 2003/02/07 - Tony Cureington <tony.cureington * hp_com>
- * - Fix bond_mii_monitor() logic error that could result in
- * bonding round-robin mode ignoring links after failover/recovery
- *
- * 2003/03/17 - Jay Vosburgh <fubar at us dot ibm dot com>
- * - kmalloc fix (GFP_KERNEL to GFP_ATOMIC) reported by
- * Shmulik dot Hen at intel.com.
- * - Based on discussion on mailing list, changed use of
- * update_slave_cnt(), created wrapper functions for adding/removing
- * slaves, changed bond_xmit_xor() to check slave_cnt instead of
- * checking slave and slave->dev (which only worked by accident).
- * - Misc code cleanup: get arp_send() prototype from header file,
- * add max_bonds to bonding.txt.
- *
- * 2003/03/18 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and
- * Shmulik Hen <shmulik.hen at intel dot com>
- * - Make sure only bond_attach_slave() and bond_detach_slave() can
- * manipulate the slave list, including slave_cnt, even when in
- * bond_release_all().
- * - Fixed hang in bond_release() with traffic running:
- * netdev_set_master() must not be called from within the bond lock.
- *
- * 2003/03/18 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and
- * Shmulik Hen <shmulik.hen at intel dot com>
- * - Fixed hang in bond_enslave() with traffic running:
- * netdev_set_master() must not be called from within the bond lock.
- *
- * 2003/03/18 - Amir Noam <amir.noam at intel dot com>
- * - Added support for getting slave's speed and duplex via ethtool.
- * Needed for 802.3ad and other future modes.
- *
- * 2003/03/18 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and
- * Shmulik Hen <shmulik.hen at intel dot com>
- * - Enable support of modes that need to use the unique mac address of
- * each slave.
- * * bond_enslave(): Moved setting the slave's mac address, and
- * openning it, from the application to the driver. This breaks
- * backward comaptibility with old versions of ifenslave that open
- * the slave before enalsving it !!!.
- * * bond_release(): The driver also takes care of closing the slave
- * and restoring its original mac address.
- * - Removed the code that restores all base driver's flags.
- * Flags are automatically restored once all undo stages are done
- * properly.
- * - Block possibility of enslaving before the master is up. This
- * prevents putting the system in an unstable state.
- *
- * 2003/03/18 - Amir Noam <amir.noam at intel dot com>,
- * Tsippy Mendelson <tsippy.mendelson at intel dot com> and
- * Shmulik Hen <shmulik.hen at intel dot com>
- * - Added support for IEEE 802.3ad Dynamic link aggregation mode.
- *
- * 2003/05/01 - Amir Noam <amir.noam at intel dot com>
- * - Added ABI version control to restore compatibility between
- * new/old ifenslave and new/old bonding.
- *
- * 2003/05/01 - Shmulik Hen <shmulik.hen at intel dot com>
- * - Fixed bug in bond_release_all(): save old value of curr_active_slave
- * before setting it to NULL.
- * - Changed driver versioning scheme to include version number instead
- * of release date (that is already in another field). There are 3
- * fields X.Y.Z where:
- * X - Major version - big behavior changes
- * Y - Minor version - addition of features
- * Z - Extra version - minor changes and bug fixes
- * The current version is 1.0.0 as a base line.
- *
- * 2003/05/01 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and
- * Amir Noam <amir.noam at intel dot com>
- * - Added support for lacp_rate module param.
- * - Code beautification and style changes (mainly in comments).
- * new version - 1.0.1
- *
- * 2003/05/01 - Shmulik Hen <shmulik.hen at intel dot com>
- * - Based on discussion on mailing list, changed locking scheme
- * to use lock/unlock or lock_bh/unlock_bh appropriately instead
- * of lock_irqsave/unlock_irqrestore. The new scheme helps exposing
- * hidden bugs and solves system hangs that occurred due to the fact
- * that holding lock_irqsave doesn't prevent softirqs from running.
- * This also increases total throughput since interrupts are not
- * blocked on each transmitted packets or monitor timeout.
- * new version - 2.0.0
- *
- * 2003/05/01 - Shmulik Hen <shmulik.hen at intel dot com>
- * - Added support for Transmit load balancing mode.
- * - Concentrate all assignments of curr_active_slave to a single point
- * so specific modes can take actions when the primary adapter is
- * changed.
- * - Take the updelay parameter into consideration during bond_enslave
- * since some adapters loose their link during setting the device.
- * - Renamed bond_3ad_link_status_changed() to
- * bond_3ad_handle_link_change() for compatibility with TLB.
- * new version - 2.1.0
- *
- * 2003/05/01 - Tsippy Mendelson <tsippy.mendelson at intel dot com>
- * - Added support for Adaptive load balancing mode which is
- * equivalent to Transmit load balancing + Receive load balancing.
- * new version - 2.2.0
- *
- * 2003/05/15 - Jay Vosburgh <fubar at us dot ibm dot com>
- * - Applied fix to activebackup_arp_monitor posted to bonding-devel
- * by Tony Cureington <tony.cureington * hp_com>. Fixes ARP
- * monitor endless failover bug. Version to 2.2.10
- *
- * 2003/05/20 - Amir Noam <amir.noam at intel dot com>
- * - Fixed bug in ABI version control - Don't commit to a specific
- * ABI version if receiving unsupported ioctl commands.
- *
- * 2003/05/22 - Jay Vosburgh <fubar at us dot ibm dot com>
- * - Fix ifenslave -c causing bond to loose existing routes;
- * added bond_set_mac_address() that doesn't require the
- * bond to be down.
- * - In conjunction with fix for ifenslave -c, in
- * bond_change_active(), changing to the already active slave
- * is no longer an error (it successfully does nothing).
- *
- * 2003/06/30 - Amir Noam <amir.noam at intel dot com>
- * - Fixed bond_change_active() for ALB/TLB modes.
- * Version to 2.2.14.
- *
- * 2003/07/29 - Amir Noam <amir.noam at intel dot com>
- * - Fixed ARP monitoring bug.
- * Version to 2.2.15.
- *
- * 2003/07/31 - Willy Tarreau <willy at ods dot org>
- * - Fixed kernel panic when using ARP monitoring without
- * setting bond's IP address.
- * Version to 2.2.16.
- *
- * 2003/08/06 - Amir Noam <amir.noam at intel dot com>
- * - Back port from 2.6: use alloc_netdev(); fix /proc handling;
- * made stats a part of bond struct so no need to allocate
- * and free it separately; use standard list operations instead
- * of pre-allocated array of bonds.
- * Version to 2.3.0.
- *
- * 2003/08/07 - Jay Vosburgh <fubar at us dot ibm dot com>,
- * Amir Noam <amir.noam at intel dot com> and
- * Shmulik Hen <shmulik.hen at intel dot com>
- * - Propagating master's settings: Distinguish between modes that
- * use a primary slave from those that don't, and propagate settings
- * accordingly; Consolidate change_active opeartions and add
- * reselect_active and find_best opeartions; Decouple promiscuous
- * handling from the multicast mode setting; Add support for changing
- * HW address and MTU with proper unwind; Consolidate procfs code,
- * add CHANGENAME handler; Enhance netdev notification handling.
- * Version to 2.4.0.
- *
- * 2003/09/15 - Stephen Hemminger <shemminger at osdl dot org>,
- * Amir Noam <amir.noam at intel dot com>
- * - Convert /proc to seq_file interface.
- * Change /proc/net/bondX/info to /proc/net/bonding/bondX.
- * Set version to 2.4.1.
- *
- * 2003/11/20 - Amir Noam <amir.noam at intel dot com>
- * - Fix /proc creation/destruction.
- *
- * 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com>
- * - Massive cleanup - Set version to 2.5.0
- * Code changes:
- * o Consolidate format of prints and debug prints.
- * o Remove bonding_t/slave_t typedefs and consolidate all casts.
- * o Remove dead code and unnecessary checks.
- * o Consolidate starting/stopping timers.
- * o Consolidate handling of primary module param throughout the code.
- * o Removed multicast module param support - all settings are done
- * according to mode.
- * o Slave list iteration - bond is no longer part of the list,
- * added cyclic list iteration macros.
- * o Consolidate error handling in all xmit functions.
- * Style changes:
- * o Consolidate function naming and declarations.
- * o Consolidate function params and local variables names.
- * o Consolidate return values.
- * o Consolidate curly braces.
- * o Consolidate conditionals format.
- * o Change struct member names and types.
- * o Chomp trailing spaces, remove empty lines, fix indentations.
- * o Re-organize code according to context.
- *
- * 2003/12/30 - Amir Noam <amir.noam at intel dot com>
- * - Fixed: Cannot remove and re-enslave the original active slave.
- * - Fixed: Releasing the original active slave causes mac address
- * duplication.
- * - Add support for slaves that use ethtool_ops.
- * Set version to 2.5.3.
- *
- * 2004/01/05 - Amir Noam <amir.noam at intel dot com>
- * - Save bonding parameters per bond instead of using the global values.
- * Set version to 2.5.4.
- *
- * 2004/01/14 - Shmulik Hen <shmulik.hen at intel dot com>
- * - Enhance VLAN support:
- * * Add support for VLAN hardware acceleration capable slaves.
- * * Add capability to tag self generated packets in ALB/TLB modes.
- * Set version to 2.6.0.
- * 2004/10/29 - Mitch Williams <mitch.a.williams at intel dot com>
- * - Fixed bug when unloading module while using 802.3ad. If
- * spinlock debugging is turned on, this causes a stack dump.
- * Solution is to move call to dev_remove_pack outside of the
- * spinlock.
- * Set version to 2.6.1.
- * 2005/06/05 - Jay Vosburgh <fubar@us.ibm.com>
- * - Support for generating gratuitous ARPs in active-backup mode.
- * Includes support for VLAN tagging all bonding-generated ARPs
- * as needed. Set version to 2.6.2.
- * 2005/06/08 - Jason Gabler <jygabler at lbl dot gov>
- * - alternate hashing policy support for mode 2
- * * Added kernel parameter "xmit_hash_policy" to allow the selection
- * of different hashing policies for mode 2. The original mode 2
- * policy is the default, now found in xmit_hash_policy_layer2().
- * * Added xmit_hash_policy_layer34()
- * - Modified by Jay Vosburgh <fubar@us.ibm.com> to also support mode 4.
- * Set version to 2.6.3.
- * 2005/09/26 - Jay Vosburgh <fubar@us.ibm.com>
- * - Removed backwards compatibility for old ifenslaves. Version 2.6.4.
*/
//#define BONDING_DEBUG 1
static char *xmit_hash_policy = NULL;
static int arp_interval = BOND_LINK_ARP_INTERV;
static char *arp_ip_target[BOND_MAX_ARP_TARGETS] = { NULL, };
+struct bond_params bonding_defaults;
module_param(max_bonds, int, 0);
MODULE_PARM_DESC(max_bonds, "Max number of bonded devices");
module_param(updelay, int, 0);
MODULE_PARM_DESC(updelay, "Delay before considering link up, in milliseconds");
module_param(downdelay, int, 0);
-MODULE_PARM_DESC(downdelay, "Delay before considering link down, in milliseconds");
+MODULE_PARM_DESC(downdelay, "Delay before considering link down, "
+ "in milliseconds");
module_param(use_carrier, int, 0);
-MODULE_PARM_DESC(use_carrier, "Use netif_carrier_ok (vs MII ioctls) in miimon; 0 for off, 1 for on (default)");
+MODULE_PARM_DESC(use_carrier, "Use netif_carrier_ok (vs MII ioctls) in miimon; "
+ "0 for off, 1 for on (default)");
module_param(mode, charp, 0);
-MODULE_PARM_DESC(mode, "Mode of operation : 0 for round robin, 1 for active-backup, 2 for xor");
+MODULE_PARM_DESC(mode, "Mode of operation : 0 for balance-rr, "
+ "1 for active-backup, 2 for balance-xor, "
+ "3 for broadcast, 4 for 802.3ad, 5 for balance-tlb, "
+ "6 for balance-alb");
module_param(primary, charp, 0);
MODULE_PARM_DESC(primary, "Primary network device to use");
module_param(lacp_rate, charp, 0);
-MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner (slow/fast)");
+MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner "
+ "(slow/fast)");
module_param(xmit_hash_policy, charp, 0);
-MODULE_PARM_DESC(xmit_hash_policy, "XOR hashing method : 0 for layer 2 (default), 1 for layer 3+4");
+MODULE_PARM_DESC(xmit_hash_policy, "XOR hashing method: 0 for layer 2 (default)"
+ ", 1 for layer 3+4");
module_param(arp_interval, int, 0);
MODULE_PARM_DESC(arp_interval, "arp interval in milliseconds");
module_param_array(arp_ip_target, charp, NULL, 0);
static const char *version =
DRV_DESCRIPTION ": v" DRV_VERSION " (" DRV_RELDATE ")\n";
-static LIST_HEAD(bond_dev_list);
+LIST_HEAD(bond_dev_list);
#ifdef CONFIG_PROC_FS
static struct proc_dir_entry *bond_proc_dir = NULL;
#endif
+extern struct rw_semaphore bonding_rwsem;
static u32 arp_target[BOND_MAX_ARP_TARGETS] = { 0, } ;
static int arp_ip_count = 0;
static int bond_mode = BOND_MODE_ROUNDROBIN;
static int xmit_hashtype= BOND_XMIT_POLICY_LAYER2;
static int lacp_fast = 0;
-struct bond_parm_tbl {
- char *modename;
- int mode;
-};
-static struct bond_parm_tbl bond_lacp_tbl[] = {
+struct bond_parm_tbl bond_lacp_tbl[] = {
{ "slow", AD_LACP_SLOW},
{ "fast", AD_LACP_FAST},
{ NULL, -1},
};
-static struct bond_parm_tbl bond_mode_tbl[] = {
+struct bond_parm_tbl bond_mode_tbl[] = {
{ "balance-rr", BOND_MODE_ROUNDROBIN},
{ "active-backup", BOND_MODE_ACTIVEBACKUP},
{ "balance-xor", BOND_MODE_XOR},
{ NULL, -1},
};
-static struct bond_parm_tbl xmit_hashtype_tbl[] = {
+struct bond_parm_tbl xmit_hashtype_tbl[] = {
{ "layer2", BOND_XMIT_POLICY_LAYER2},
{ "layer3+4", BOND_XMIT_POLICY_LAYER34},
{ NULL, -1},
/*-------------------------- Forward declarations ---------------------------*/
-static inline void bond_set_mode_ops(struct bonding *bond, int mode);
static void bond_send_gratuitous_arp(struct bonding *bond);
/*---------------------------- General routines -----------------------------*/
-static const char *bond_mode_name(int mode)
+const char *bond_mode_name(int mode)
{
switch (mode) {
case BOND_MODE_ROUNDROBIN :
res = bond_add_vlan(bond, vid);
if (res) {
printk(KERN_ERR DRV_NAME
- ": %s: Failed to add vlan id %d\n",
+ ": %s: Error: Failed to add vlan id %d\n",
bond_dev->name, vid);
}
}
res = bond_del_vlan(bond, vid);
if (res) {
printk(KERN_ERR DRV_NAME
- ": %s: Failed to remove vlan id %d\n",
+ ": %s: Error: Failed to remove vlan id %d\n",
bond_dev->name, vid);
}
}
*
* Warning: Caller must hold curr_slave_lock for writing.
*/
-static void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
+void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
{
struct slave *old_active = bond->curr_active_slave;
*
* Warning: Caller must hold curr_slave_lock for writing.
*/
-static void bond_select_active_slave(struct bonding *bond)
+void bond_select_active_slave(struct bonding *bond)
{
struct slave *best_slave;
/*---------------------------------- IOCTL ----------------------------------*/
-static int bond_sethwaddr(struct net_device *bond_dev, struct net_device *slave_dev)
+int bond_sethwaddr(struct net_device *bond_dev, struct net_device *slave_dev)
{
dprintk("bond_dev=%p\n", bond_dev);
dprintk("slave_dev=%p\n", slave_dev);
}
/* enslave device <slave> to bond device <master> */
-static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
+int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
{
struct bonding *bond = bond_dev->priv;
struct slave *new_slave = NULL;
if (!bond->params.use_carrier && slave_dev->ethtool_ops == NULL &&
slave_dev->do_ioctl == NULL) {
printk(KERN_WARNING DRV_NAME
- ": Warning : no link monitoring support for %s\n",
- slave_dev->name);
+ ": %s: Warning: no link monitoring support for %s\n",
+ bond_dev->name, slave_dev->name);
}
/* bond must be initialized by bond_open() before enslaving */
dprintk("%s: NETIF_F_VLAN_CHALLENGED\n", slave_dev->name);
if (!list_empty(&bond->vlan_list)) {
printk(KERN_ERR DRV_NAME
- ": Error: cannot enslave VLAN "
+ ": %s: Error: cannot enslave VLAN "
"challenged slave %s on VLAN enabled "
- "bond %s\n", slave_dev->name,
+ "bond %s\n", bond_dev->name, slave_dev->name,
bond_dev->name);
return -EPERM;
} else {
printk(KERN_WARNING DRV_NAME
- ": Warning: enslaved VLAN challenged "
+ ": %s: Warning: enslaved VLAN challenged "
"slave %s. Adding VLANs will be blocked as "
"long as %s is part of bond %s\n",
- slave_dev->name, slave_dev->name,
+ bond_dev->name, slave_dev->name, slave_dev->name,
bond_dev->name);
bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
}
if (slave_dev->set_mac_address == NULL) {
printk(KERN_ERR DRV_NAME
- ": Error: The slave device you specified does "
- "not support setting the MAC address.\n");
- printk(KERN_ERR
- "Your kernel likely does not support slave devices.\n");
-
- res = -EOPNOTSUPP;
+ ": %s: Error: The slave device you specified does "
+ "not support setting the MAC address. "
+ "Your kernel likely does not support slave "
+ "devices.\n", bond_dev->name);
+ res = -EOPNOTSUPP;
goto err_undo_flags;
}
* the messages for netif_carrier.
*/
printk(KERN_WARNING DRV_NAME
- ": Warning: MII and ETHTOOL support not "
+ ": %s: Warning: MII and ETHTOOL support not "
"available for interface %s, and "
"arp_interval/arp_ip_target module parameters "
"not specified, thus bonding will not detect "
"link failures! see bonding.txt for details.\n",
- slave_dev->name);
+ bond_dev->name, slave_dev->name);
} else if (link_reporting == -1) {
/* unable get link status using mii/ethtool */
printk(KERN_WARNING DRV_NAME
- ": Warning: can't get link status from "
+ ": %s: Warning: can't get link status from "
"interface %s; the network driver associated "
"with this interface does not support MII or "
"ETHTOOL link status reporting, thus miimon "
"has no effect on this interface.\n",
- slave_dev->name);
+ bond_dev->name, slave_dev->name);
}
}
if (bond_update_speed_duplex(new_slave) &&
(new_slave->link != BOND_LINK_DOWN)) {
printk(KERN_WARNING DRV_NAME
- ": Warning: failed to get speed and duplex from %s, "
+ ": %s: Warning: failed to get speed and duplex from %s, "
"assumed to be 100Mb/sec and Full.\n",
- new_slave->dev->name);
+ bond_dev->name, new_slave->dev->name);
if (bond->params.mode == BOND_MODE_8023AD) {
- printk(KERN_WARNING
- "Operation of 802.3ad mode requires ETHTOOL "
+ printk(KERN_WARNING DRV_NAME
+ ": %s: Warning: Operation of 802.3ad mode requires ETHTOOL "
"support in base driver for proper aggregator "
- "selection.\n");
+ "selection.\n", bond_dev->name);
}
}
write_unlock_bh(&bond->lock);
+ res = bond_create_slave_symlinks(bond_dev, slave_dev);
+ if (res)
+ goto err_unset_master;
+
printk(KERN_INFO DRV_NAME
": %s: enslaving %s as a%s interface with a%s link.\n",
bond_dev->name, slave_dev->name,
* for Bonded connections:
* The first up interface should be left on and all others downed.
*/
-static int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
+int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
{
struct bonding *bond = bond_dev->priv;
struct slave *slave, *oldcurrent;
if (!(slave_dev->flags & IFF_SLAVE) ||
(slave_dev->master != bond_dev)) {
printk(KERN_ERR DRV_NAME
- ": Error: %s: cannot release %s.\n",
+ ": %s: Error: cannot release %s.\n",
bond_dev->name, slave_dev->name);
return -EINVAL;
}
ETH_ALEN);
if (!mac_addr_differ && (bond->slave_cnt > 1)) {
printk(KERN_WARNING DRV_NAME
- ": Warning: the permanent HWaddr of %s "
+ ": %s: Warning: the permanent HWaddr of %s "
"- %02X:%02X:%02X:%02X:%02X:%02X - is "
"still in use by %s. Set the HWaddr of "
"%s to a different address to avoid "
"conflicts.\n",
+ bond_dev->name,
slave_dev->name,
slave->perm_hwaddr[0],
slave->perm_hwaddr[1],
bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
} else {
printk(KERN_WARNING DRV_NAME
- ": Warning: clearing HW address of %s while it "
+ ": %s: Warning: clearing HW address of %s while it "
"still has VLANs.\n",
- bond_dev->name);
+ bond_dev->name, bond_dev->name);
printk(KERN_WARNING DRV_NAME
- ": When re-adding slaves, make sure the bond's "
- "HW address matches its VLANs'.\n");
+ ": %s: When re-adding slaves, make sure the bond's "
+ "HW address matches its VLANs'.\n",
+ bond_dev->name);
}
} else if ((bond_dev->features & NETIF_F_VLAN_CHALLENGED) &&
!bond_has_challenged_slaves(bond)) {
printk(KERN_INFO DRV_NAME
- ": last VLAN challenged slave %s "
+ ": %s: last VLAN challenged slave %s "
"left bond %s. VLAN blocking is removed\n",
- slave_dev->name, bond_dev->name);
+ bond_dev->name, slave_dev->name, bond_dev->name);
bond_dev->features &= ~NETIF_F_VLAN_CHALLENGED;
}
write_unlock_bh(&bond->lock);
+ /* must do this from outside any spinlocks */
+ bond_destroy_slave_symlinks(bond_dev, slave_dev);
+
bond_del_vlans_from_slave(bond, slave_dev);
/* If the mode USES_PRIMARY, then we should only remove its
*/
write_unlock_bh(&bond->lock);
+ bond_destroy_slave_symlinks(bond_dev, slave_dev);
bond_del_vlans_from_slave(bond, slave_dev);
/* If the mode USES_PRIMARY, then we should only remove its
bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
} else {
printk(KERN_WARNING DRV_NAME
- ": Warning: clearing HW address of %s while it "
+ ": %s: Warning: clearing HW address of %s while it "
"still has VLANs.\n",
- bond_dev->name);
+ bond_dev->name, bond_dev->name);
printk(KERN_WARNING DRV_NAME
- ": When re-adding slaves, make sure the bond's "
- "HW address matches its VLANs'.\n");
+ ": %s: When re-adding slaves, make sure the bond's "
+ "HW address matches its VLANs'.\n",
+ bond_dev->name);
}
printk(KERN_INFO DRV_NAME
/*-------------------------------- Monitoring -------------------------------*/
/* this function is called regularly to monitor each slave's link. */
-static void bond_mii_monitor(struct net_device *bond_dev)
+void bond_mii_monitor(struct net_device *bond_dev)
{
struct bonding *bond = bond_dev->priv;
struct slave *slave, *oldcurrent;
break;
default:
/* Should not happen */
- printk(KERN_ERR "bonding: Error: %s Illegal value (link=%d)\n",
- slave->dev->name, slave->link);
+ printk(KERN_ERR DRV_NAME
+ ": %s: Error: %s Illegal value (link=%d)\n",
+ bond_dev->name,
+ slave->dev->name,
+ slave->link);
goto out;
} /* end of switch (slave->link) */
struct flowi fl;
struct rtable *rt;
- for (i = 0; (i < BOND_MAX_ARP_TARGETS) && targets[i]; i++) {
+ for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) {
+ if (!targets[i])
+ continue;
dprintk("basa: target %x\n", targets[i]);
if (list_empty(&bond->vlan_list)) {
dprintk("basa: empty vlan: arp_send\n");
* arp is transmitted to generate traffic. see activebackup_arp_monitor for
* arp monitoring in active backup mode.
*/
-static void bond_loadbalance_arp_mon(struct net_device *bond_dev)
+void bond_loadbalance_arp_mon(struct net_device *bond_dev)
{
struct bonding *bond = bond_dev->priv;
struct slave *slave, *oldcurrent;
* may have received.
* see loadbalance_arp_monitor for arp monitoring in load balancing mode
*/
-static void bond_activebackup_arp_mon(struct net_device *bond_dev)
+void bond_activebackup_arp_mon(struct net_device *bond_dev)
{
struct bonding *bond = bond_dev->priv;
struct slave *slave;
{
struct bonding *bond = seq->private;
struct slave *curr;
+ int i;
+ u32 target;
read_lock(&bond->curr_slave_lock);
curr = bond->curr_active_slave;
seq_printf(seq, "Bonding Mode: %s\n",
bond_mode_name(bond->params.mode));
+ if (bond->params.mode == BOND_MODE_XOR ||
+ bond->params.mode == BOND_MODE_8023AD) {
+ seq_printf(seq, "Transmit Hash Policy: %s (%d)\n",
+ xmit_hashtype_tbl[bond->params.xmit_policy].modename,
+ bond->params.xmit_policy);
+ }
+
if (USES_PRIMARY(bond->params.mode)) {
seq_printf(seq, "Primary Slave: %s\n",
- (bond->params.primary[0]) ?
- bond->params.primary : "None");
+ (bond->primary_slave) ?
+ bond->primary_slave->dev->name : "None");
seq_printf(seq, "Currently Active Slave: %s\n",
(curr) ? curr->dev->name : "None");
seq_printf(seq, "Down Delay (ms): %d\n",
bond->params.downdelay * bond->params.miimon);
+
+ /* ARP information */
+ if(bond->params.arp_interval > 0) {
+ int printed=0;
+ seq_printf(seq, "ARP Polling Interval (ms): %d\n",
+ bond->params.arp_interval);
+
+ seq_printf(seq, "ARP IP target/s (n.n.n.n form):");
+
+ for(i = 0; (i < BOND_MAX_ARP_TARGETS) ;i++) {
+ if (!bond->params.arp_targets[i])
+ continue;
+ if (printed)
+ seq_printf(seq, ",");
+ target = ntohl(bond->params.arp_targets[i]);
+ seq_printf(seq, " %d.%d.%d.%d", HIPQUAD(target));
+ printed = 1;
+ }
+ seq_printf(seq, "\n");
+ }
+
if (bond->params.mode == BOND_MODE_8023AD) {
struct ad_info ad_info;
bond_remove_proc_entry(bond);
bond_create_proc_entry(bond);
#endif
-
+ down_write(&(bonding_rwsem));
+ bond_destroy_sysfs_entry(bond);
+ bond_create_sysfs_entry(bond);
+ up_write(&(bonding_rwsem));
return NOTIFY_DONE;
}
return -EPERM;
}
+ down_write(&(bonding_rwsem));
slave_dev = dev_get_by_name(ifr->ifr_slave);
dprintk("slave_dev=%p: \n", slave_dev);
dev_put(slave_dev);
}
+ up_write(&(bonding_rwsem));
return res;
}
bond_for_each_slave(bond, slave, i) {
dprintk("s %p s->p %p c_m %p\n", slave,
slave->prev, slave->dev->change_mtu);
+
res = dev_set_mtu(slave->dev, new_mtu);
if (res) {
struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC);
if (!skb2) {
printk(KERN_ERR DRV_NAME
- ": Error: bond_xmit_broadcast(): "
- "skb_clone() failed\n");
+ ": %s: Error: bond_xmit_broadcast(): "
+ "skb_clone() failed\n",
+ bond_dev->name);
continue;
}
/*
* set bond mode specific net device operations
*/
-static inline void bond_set_mode_ops(struct bonding *bond, int mode)
+void bond_set_mode_ops(struct bonding *bond, int mode)
{
struct net_device *bond_dev = bond->dev;
default:
/* Should never happen, mode already checked */
printk(KERN_ERR DRV_NAME
- ": Error: Unknown bonding mode %d\n",
+ ": %s: Error: Unknown bonding mode %d\n",
+ bond_dev->name,
mode);
break;
}
* Does not allocate but creates a /proc entry.
* Allowed to fail.
*/
-static int __init bond_init(struct net_device *bond_dev, struct bond_params *params)
+static int bond_init(struct net_device *bond_dev, struct bond_params *params)
{
struct bonding *bond = bond_dev->priv;
/* De-initialize device specific data.
* Caller must hold rtnl_lock.
*/
-static inline void bond_deinit(struct net_device *bond_dev)
+void bond_deinit(struct net_device *bond_dev)
{
struct bonding *bond = bond_dev->priv;
* Convert string input module parms. Accept either the
* number of the mode or its string name.
*/
-static inline int bond_parse_parm(char *mode_arg, struct bond_parm_tbl *tbl)
+int bond_parse_parm(char *mode_arg, struct bond_parm_tbl *tbl)
{
int i;
if (max_bonds < 1 || max_bonds > INT_MAX) {
printk(KERN_WARNING DRV_NAME
": Warning: max_bonds (%d) not in range %d-%d, so it "
- "was reset to BOND_DEFAULT_MAX_BONDS (%d)",
+ "was reset to BOND_DEFAULT_MAX_BONDS (%d)\n",
max_bonds, 1, INT_MAX, BOND_DEFAULT_MAX_BONDS);
max_bonds = BOND_DEFAULT_MAX_BONDS;
}
return 0;
}
+/* Create a new bond based on the specified name and bonding parameters.
+ * Caller must NOT hold rtnl_lock; we need to release it here before we
+ * set up our sysfs entries.
+ */
+int bond_create(char *name, struct bond_params *params, struct bonding **newbond)
+{
+ struct net_device *bond_dev;
+ int res;
+
+ rtnl_lock();
+ bond_dev = alloc_netdev(sizeof(struct bonding), name, ether_setup);
+ if (!bond_dev) {
+ printk(KERN_ERR DRV_NAME
+ ": %s: eek! can't alloc netdev!\n",
+ name);
+ res = -ENOMEM;
+ goto out_rtnl;
+ }
+
+ /* bond_init() must be called after dev_alloc_name() (for the
+ * /proc files), but before register_netdevice(), because we
+ * need to set function pointers.
+ */
+
+ res = bond_init(bond_dev, params);
+ if (res < 0) {
+ goto out_netdev;
+ }
+
+ SET_MODULE_OWNER(bond_dev);
+
+ res = register_netdevice(bond_dev);
+ if (res < 0) {
+ goto out_bond;
+ }
+ if (newbond)
+ *newbond = bond_dev->priv;
+
+ rtnl_unlock(); /* allows sysfs registration of net device */
+ res = bond_create_sysfs_entry(bond_dev->priv);
+ goto done;
+out_bond:
+ bond_deinit(bond_dev);
+out_netdev:
+ free_netdev(bond_dev);
+out_rtnl:
+ rtnl_unlock();
+done:
+ return res;
+}
+
static int __init bonding_init(void)
{
- struct bond_params params;
int i;
int res;
+ char new_bond_name[8]; /* Enough room for 999 bonds at init. */
printk(KERN_INFO "%s", version);
- res = bond_check_params(¶ms);
+ res = bond_check_params(&bonding_defaults);
if (res) {
- return res;
+ goto out;
}
- rtnl_lock();
-
#ifdef CONFIG_PROC_FS
bond_create_proc_dir();
#endif
-
for (i = 0; i < max_bonds; i++) {
- struct net_device *bond_dev;
-
- bond_dev = alloc_netdev(sizeof(struct bonding), "", ether_setup);
- if (!bond_dev) {
- res = -ENOMEM;
- goto out_err;
- }
-
- res = dev_alloc_name(bond_dev, "bond%d");
- if (res < 0) {
- free_netdev(bond_dev);
- goto out_err;
- }
-
- /* bond_init() must be called after dev_alloc_name() (for the
- * /proc files), but before register_netdevice(), because we
- * need to set function pointers.
- */
- res = bond_init(bond_dev, ¶ms);
- if (res < 0) {
- free_netdev(bond_dev);
- goto out_err;
- }
-
- SET_MODULE_OWNER(bond_dev);
-
- res = register_netdevice(bond_dev);
- if (res < 0) {
- bond_deinit(bond_dev);
- free_netdev(bond_dev);
- goto out_err;
- }
+ sprintf(new_bond_name, "bond%d",i);
+ res = bond_create(new_bond_name,&bonding_defaults, NULL);
+ if (res)
+ goto err;
}
- rtnl_unlock();
+ res = bond_create_sysfs();
+ if (res)
+ goto err;
+
register_netdevice_notifier(&bond_netdev_notifier);
register_inetaddr_notifier(&bond_inetaddr_notifier);
- return 0;
-
-out_err:
- /*
- * rtnl_unlock() will run netdev_run_todo(), putting the
- * thus-far-registered bonding devices into a state which
- * unregigister_netdevice() will accept
- */
- rtnl_unlock();
+ goto out;
+err:
rtnl_lock();
-
- /* free and unregister all bonds that were successfully added */
bond_free_all();
-
+ bond_destroy_sysfs();
rtnl_unlock();
-
+out:
return res;
+
}
static void __exit bonding_exit(void)
rtnl_lock();
bond_free_all();
+ bond_destroy_sysfs();
rtnl_unlock();
}
git.samba.org / sfrench / cifs-2.6.git / blobdiff