Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

[sfrench/cifs-2.6.git] / drivers / net / Kconfig

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 38ac6796fc48238ed462d32f9ae980189c86f0f2..dcdad217df51ef439a695215177c1fd1a177274b 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -486,8 +486,8 @@ config SGI_IOC3_ETH_HW_TX_CSUM
          enables offloading for checksums on transmit.  If unsure, say Y.
 
 config MIPS_SIM_NET
-       tristate "MIPS simulator Network device (EXPERIMENTAL)"
-       depends on MIPS_SIM && EXPERIMENTAL
+       tristate "MIPS simulator Network device"
+       depends on NET_ETHERNET && MIPS_SIM
        help
          The MIPSNET device is a simple Ethernet network device which is
          emulated by the MIPS Simulator.
@@ -1444,7 +1444,8 @@ config CS89x0
 
 config TC35815
        tristate "TOSHIBA TC35815 Ethernet support"
-       depends on NET_PCI && PCI && TOSHIBA_JMR3927
+       depends on NET_PCI && PCI && MIPS
+       select MII
 
 config DGRS
        tristate "Digi Intl. RightSwitch SE-X support"
@@ -2245,7 +2246,7 @@ config BNX2
 
 config SPIDER_NET
        tristate "Spider Gigabit Ethernet driver"
-       depends on PCI && PPC_IBM_CELL_BLADE
+       depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
        select FW_LOADER
        help
          This driver supports the Gigabit Ethernet chips present on the
@@ -2263,6 +2264,7 @@ config GIANFAR
        tristate "Gianfar Ethernet"
        depends on 85xx || 83xx || PPC_86xx
        select PHYLIB
+       select CRC32
        help
          This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
          and MPC86xx family of chips, and the FEC on the 8540.
@@ -2272,11 +2274,12 @@ config GFAR_NAPI
        depends on GIANFAR
 
 config UCC_GETH
-       tristate "Freescale QE UCC GETH"
-       depends on QUICC_ENGINE && UCC_FAST
+       tristate "Freescale QE Gigabit Ethernet"
+       depends on QUICC_ENGINE
+       select UCC_FAST
        help
-         This driver supports the Gigabit Ethernet mode of QE UCC.
-         QE can be found on MPC836x CPUs.
+         This driver supports the Gigabit Ethernet mode of the QUICC Engine,
+         which is available on some Freescale SOCs.
 
 config UGETH_NAPI
        bool "NAPI Support"
@@ -2290,14 +2293,10 @@ config UGETH_FILTERING
        bool "Mac address filtering support"
        depends on UCC_GETH
 
-config UGETH_TX_ON_DEMOND
-       bool "Transmit on Demond support"
+config UGETH_TX_ON_DEMAND
+       bool "Transmit on Demand support"
        depends on UCC_GETH
 
-config UGETH_HAS_GIGA
-       bool
-       depends on UCC_GETH && PPC_MPC836x
-
 config MV643XX_ETH
        tristate "MV-643XX Ethernet support"
        depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MOMENCO_OCELOT_3 || (PPC_MULTIPLATFORM && PPC32)
@@ -2372,22 +2371,23 @@ config CHELSIO_T1_NAPI
          when the driver is receiving lots of packets from the card.
 
 config CHELSIO_T3
-        tristate "Chelsio Communications T3 10Gb Ethernet support"
-        depends on PCI
-        help
-          This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
-          adapters.
+       tristate "Chelsio Communications T3 10Gb Ethernet support"
+       depends on PCI
+       select FW_LOADER
+       help
+         This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
+         adapters.
 
-          For general information about Chelsio and our products, visit
-          our website at <http://www.chelsio.com>.
+         For general information about Chelsio and our products, visit
+         our website at <http://www.chelsio.com>.
 
-          For customer support, please visit our customer support page at
-          <http://www.chelsio.com/support.htm>.
+         For customer support, please visit our customer support page at
+         <http://www.chelsio.com/support.htm>.
 
-          Please send feedback to <linux-bugs@chelsio.com>.
+         Please send feedback to <linux-bugs@chelsio.com>.
 
-          To compile this driver as a module, choose M here: the module
-          will be called cxgb3.
+         To compile this driver as a module, choose M here: the module
+         will be called cxgb3.
 
 config EHEA
        tristate "eHEA Ethernet support"
@@ -2927,11 +2927,6 @@ endif #NETDEVICES
 config NETPOLL
        def_bool NETCONSOLE
 
-config NETPOLL_RX
-       bool "Netpoll support for trapping incoming packets"
-       default n
-       depends on NETPOLL
-
 config NETPOLL_TRAP
        bool "Netpoll traffic trapping"
        default n