Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland...

[sfrench/cifs-2.6.git] / drivers / mtd / nand / Kconfig

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 362d177efe1b4cb567be70bd980dad4db3bec980..8b4b67c8a391005bb530abc91ff61690546f2dfb 100644 (file)
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -37,7 +37,6 @@ config MTD_SM_COMMON
 
 config MTD_NAND_MUSEUM_IDS
        bool "Enable chip ids for obsolete ancient NAND devices"
-       depends on MTD_NAND
        default n
        help
          Enable this option only when your board has first generation
@@ -61,6 +60,7 @@ config MTD_NAND_DENALI
 config MTD_NAND_DENALI_SCRATCH_REG_ADDR
         hex "Denali NAND size scratch register address"
         default "0xFF108018"
+        depends on MTD_NAND_DENALI
         help
           Some platforms place the NAND chip size in a scratch register
           because (some versions of) the driver aren't able to automatically
@@ -101,13 +101,13 @@ config MTD_NAND_AMS_DELTA
 
 config MTD_NAND_OMAP2
        tristate "NAND Flash device on OMAP2 and OMAP3"
-       depends on ARM && MTD_NAND && (ARCH_OMAP2 || ARCH_OMAP3)
+       depends on ARM && (ARCH_OMAP2 || ARCH_OMAP3)
        help
           Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms.
 
 config MTD_NAND_OMAP_PREFETCH
        bool "GPMC prefetch support for NAND Flash device"
-       depends on MTD_NAND && MTD_NAND_OMAP2
+       depends on MTD_NAND_OMAP2
        default y
        help
         The NAND device can be accessed for Read/Write using GPMC PREFETCH engine
@@ -146,7 +146,7 @@ config MTD_NAND_AU1550
 
 config MTD_NAND_BF5XX
        tristate "Blackfin on-chip NAND Flash Controller driver"
-       depends on (BF54x || BF52x) && MTD_NAND
+       depends on BF54x || BF52x
        help
          This enables the Blackfin on-chip NAND flash controller
 
@@ -236,7 +236,7 @@ config MTD_NAND_S3C2410_CLKSTOP
 
 config MTD_NAND_BCM_UMI
        tristate "NAND Flash support for BCM Reference Boards"
-       depends on ARCH_BCMRING && MTD_NAND
+       depends on ARCH_BCMRING
        help
          This enables the NAND flash controller on the BCM UMI block.
 
@@ -395,7 +395,7 @@ endchoice
 
 config MTD_NAND_PXA3xx
        tristate "Support for NAND flash devices on PXA3xx"
-       depends on MTD_NAND && (PXA3xx || ARCH_MMP)
+       depends on PXA3xx || ARCH_MMP
        help
          This enables the driver for the NAND flash device found on
          PXA3xx processors
@@ -409,18 +409,18 @@ config MTD_NAND_PXA3xx_BUILTIN
 
 config MTD_NAND_CM_X270
        tristate "Support for NAND Flash on CM-X270 modules"
-       depends on MTD_NAND && MACH_ARMCORE
+       depends on MACH_ARMCORE
 
 config MTD_NAND_PASEMI
        tristate "NAND support for PA Semi PWRficient"
-       depends on MTD_NAND && PPC_PASEMI
+       depends on PPC_PASEMI
        help
          Enables support for NAND Flash interface on PA Semi PWRficient
          based boards
 
 config MTD_NAND_TMIO
        tristate "NAND Flash device on Toshiba Mobile IO Controller"
-       depends on MTD_NAND && MFD_TMIO
+       depends on MFD_TMIO
        help
          Support for NAND flash connected to a Toshiba Mobile IO
          Controller in some PDAs, including the Sharp SL6000x.
@@ -434,7 +434,6 @@ config MTD_NAND_NANDSIM
 
 config MTD_NAND_PLATFORM
        tristate "Support for generic platform NAND driver"
-       depends on MTD_NAND
        help
          This implements a generic NAND driver for on-SOC platform
          devices. You will need to provide platform-specific functions
@@ -442,14 +441,14 @@ config MTD_NAND_PLATFORM
 
 config MTD_ALAUDA
        tristate "MTD driver for Olympus MAUSB-10 and Fujifilm DPC-R1"
-       depends on MTD_NAND && USB
+       depends on USB
        help
          These two (and possibly other) Alauda-based cardreaders for
          SmartMedia and xD allow raw flash access.
 
 config MTD_NAND_ORION
        tristate "NAND Flash support for Marvell Orion SoC"
-       depends on PLAT_ORION && MTD_NAND
+       depends on PLAT_ORION
        help
          This enables the NAND flash controller on Orion machines.
 
@@ -458,7 +457,7 @@ config MTD_NAND_ORION
 
 config MTD_NAND_FSL_ELBC
        tristate "NAND support for Freescale eLBC controllers"
-       depends on MTD_NAND && PPC_OF
+       depends on PPC_OF
        help
          Various Freescale chips, including the 8313, include a NAND Flash
          Controller Module with built-in hardware ECC capabilities.
@@ -467,7 +466,7 @@ config MTD_NAND_FSL_ELBC
 
 config MTD_NAND_FSL_UPM
        tristate "Support for NAND on Freescale UPM"
-       depends on MTD_NAND && (PPC_83xx || PPC_85xx)
+       depends on PPC_83xx || PPC_85xx
        select FSL_LBC
        help
          Enables support for NAND Flash chips wired onto Freescale PowerPC
@@ -482,7 +481,7 @@ config MTD_NAND_MPC5121_NFC
 
 config MTD_NAND_MXC
        tristate "MXC NAND support"
-       depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3
+       depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3 || ARCH_MX51
        help
          This enables the driver for the NAND flash controller on the
          MXC processors.
@@ -495,7 +494,7 @@ config MTD_NAND_NOMADIK
 
 config MTD_NAND_SH_FLCTL
        tristate "Support for NAND on Renesas SuperH FLCTL"
-       depends on MTD_NAND && (SUPERH || ARCH_SHMOBILE)
+       depends on SUPERH || ARCH_SHMOBILE
        help
          Several Renesas SuperH CPU has FLCTL. This option enables support
          for NAND Flash using FLCTL.
@@ -515,7 +514,7 @@ config MTD_NAND_TXX9NDFMC
 
 config MTD_NAND_SOCRATES
        tristate "Support for NAND on Socrates board"
-       depends on MTD_NAND && SOCRATES
+       depends on SOCRATES
        help
          Enables support for NAND Flash chips wired onto Socrates board.