#include <linux/io.h>
#include <linux/module.h>
#include <linux/of_address.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#define DRVNAME "brcmstb-dpfe"
-#define FIRMWARE_NAME "dpfe.bin"
/* DCPU register offsets */
#define REG_DCPU_RESET 0x0
#define DRAM_INFO_MR4 0x4
#define DRAM_INFO_ERROR 0x8
#define DRAM_INFO_MR4_MASK 0xff
+#define DRAM_INFO_MR4_SHIFT 24 /* We need to look at byte 3 */
/* DRAM MR4 Offsets & Masks */
#define DRAM_MR4_REFRESH 0x0 /* Refresh rate */
#define DRAM_MR4_TH_OFFS_MASK 0x3
#define DRAM_MR4_TUF_MASK 0x1
-/* DRAM Vendor Offsets & Masks */
+/* DRAM Vendor Offsets & Masks (API v2) */
#define DRAM_VENDOR_MR5 0x0
#define DRAM_VENDOR_MR6 0x4
#define DRAM_VENDOR_MR7 0x8
#define DRAM_VENDOR_MR8 0xc
#define DRAM_VENDOR_ERROR 0x10
#define DRAM_VENDOR_MASK 0xff
+#define DRAM_VENDOR_SHIFT 24 /* We need to look at byte 3 */
+
+/* DRAM Information Offsets & Masks (API v3) */
+#define DRAM_DDR_INFO_MR4 0x0
+#define DRAM_DDR_INFO_MR5 0x4
+#define DRAM_DDR_INFO_MR6 0x8
+#define DRAM_DDR_INFO_MR7 0xc
+#define DRAM_DDR_INFO_MR8 0x10
+#define DRAM_DDR_INFO_ERROR 0x14
+#define DRAM_DDR_INFO_MASK 0xff
/* Reset register bits & masks */
#define DCPU_RESET_SHIFT 0x0
#define DPFE_MSG_TYPE_COMMAND 1
#define DPFE_MSG_TYPE_RESPONSE 2
-#define DELAY_LOOP_MAX 200000
+#define DELAY_LOOP_MAX 1000
enum dpfe_msg_fields {
MSG_HEADER,
MSG_ARG_COUNT,
MSG_ARG0,
MSG_CHKSUM,
- MSG_FIELD_MAX /* Last entry */
+ MSG_FIELD_MAX = 16 /* Max number of arguments */
};
enum dpfe_commands {
DPFE_CMD_MAX /* Last entry */
};
-struct dpfe_msg {
- u32 header;
- u32 command;
- u32 arg_count;
- u32 arg0;
- u32 chksum; /* This is the sum of all other entries. */
-};
-
/*
* Format of the binary firmware file:
*
bool is_big_endian;
};
+/* API version and corresponding commands */
+struct dpfe_api {
+ int version;
+ const char *fw_name;
+ const struct attribute_group **sysfs_attrs;
+ u32 command[DPFE_CMD_MAX][MSG_FIELD_MAX];
+};
+
/* Things we need for as long as we are active. */
struct private_data {
void __iomem *regs;
void __iomem *dmem;
void __iomem *imem;
struct device *dev;
+ const struct dpfe_api *dpfe_api;
struct mutex lock;
};
"Incorrect checksum", "Malformed command", "Timed out",
};
-/* List of supported firmware commands */
-static const u32 dpfe_commands[DPFE_CMD_MAX][MSG_FIELD_MAX] = {
- [DPFE_CMD_GET_INFO] = {
- [MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
- [MSG_COMMAND] = 1,
- [MSG_ARG_COUNT] = 1,
- [MSG_ARG0] = 1,
- [MSG_CHKSUM] = 4,
- },
- [DPFE_CMD_GET_REFRESH] = {
- [MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
- [MSG_COMMAND] = 2,
- [MSG_ARG_COUNT] = 1,
- [MSG_ARG0] = 1,
- [MSG_CHKSUM] = 5,
- },
- [DPFE_CMD_GET_VENDOR] = {
- [MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
- [MSG_COMMAND] = 2,
- [MSG_ARG_COUNT] = 1,
- [MSG_ARG0] = 2,
- [MSG_CHKSUM] = 6,
+/*
+ * Forward declaration of our sysfs attribute functions, so we can declare the
+ * attribute data structures early.
+ */
+static ssize_t show_info(struct device *, struct device_attribute *, char *);
+static ssize_t show_refresh(struct device *, struct device_attribute *, char *);
+static ssize_t store_refresh(struct device *, struct device_attribute *,
+ const char *, size_t);
+static ssize_t show_vendor(struct device *, struct device_attribute *, char *);
+static ssize_t show_dram(struct device *, struct device_attribute *, char *);
+
+/*
+ * Declare our attributes early, so they can be referenced in the API data
+ * structure. We need to do this, because the attributes depend on the API
+ * version.
+ */
+static DEVICE_ATTR(dpfe_info, 0444, show_info, NULL);
+static DEVICE_ATTR(dpfe_refresh, 0644, show_refresh, store_refresh);
+static DEVICE_ATTR(dpfe_vendor, 0444, show_vendor, NULL);
+static DEVICE_ATTR(dpfe_dram, 0444, show_dram, NULL);
+
+/* API v2 sysfs attributes */
+static struct attribute *dpfe_v2_attrs[] = {
+ &dev_attr_dpfe_info.attr,
+ &dev_attr_dpfe_refresh.attr,
+ &dev_attr_dpfe_vendor.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(dpfe_v2);
+
+/* API v3 sysfs attributes */
+static struct attribute *dpfe_v3_attrs[] = {
+ &dev_attr_dpfe_info.attr,
+ &dev_attr_dpfe_dram.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(dpfe_v3);
+
+/* API v2 firmware commands */
+static const struct dpfe_api dpfe_api_v2 = {
+ .version = 2,
+ .fw_name = "dpfe.bin",
+ .sysfs_attrs = dpfe_v2_groups,
+ .command = {
+ [DPFE_CMD_GET_INFO] = {
+ [MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
+ [MSG_COMMAND] = 1,
+ [MSG_ARG_COUNT] = 1,
+ [MSG_ARG0] = 1,
+ [MSG_CHKSUM] = 4,
+ },
+ [DPFE_CMD_GET_REFRESH] = {
+ [MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
+ [MSG_COMMAND] = 2,
+ [MSG_ARG_COUNT] = 1,
+ [MSG_ARG0] = 1,
+ [MSG_CHKSUM] = 5,
+ },
+ [DPFE_CMD_GET_VENDOR] = {
+ [MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
+ [MSG_COMMAND] = 2,
+ [MSG_ARG_COUNT] = 1,
+ [MSG_ARG0] = 2,
+ [MSG_CHKSUM] = 6,
+ },
+ }
+};
+
+/* API v3 firmware commands */
+static const struct dpfe_api dpfe_api_v3 = {
+ .version = 3,
+ .fw_name = NULL, /* We expect the firmware to have been downloaded! */
+ .sysfs_attrs = dpfe_v3_groups,
+ .command = {
+ [DPFE_CMD_GET_INFO] = {
+ [MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
+ [MSG_COMMAND] = 0x0101,
+ [MSG_ARG_COUNT] = 1,
+ [MSG_ARG0] = 1,
+ [MSG_CHKSUM] = 0x104,
+ },
+ [DPFE_CMD_GET_REFRESH] = {
+ [MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
+ [MSG_COMMAND] = 0x0202,
+ [MSG_ARG_COUNT] = 0,
+ /*
+ * This is a bit ugly. Without arguments, the checksum
+ * follows right after the argument count and not at
+ * offset MSG_CHKSUM.
+ */
+ [MSG_ARG0] = 0x203,
+ },
+ /* There's no GET_VENDOR command in API v3. */
},
};
writel_relaxed(val, regs + REG_DCPU_RESET);
}
-static unsigned int get_msg_chksum(const u32 msg[])
+static unsigned int get_msg_chksum(const u32 msg[], unsigned int max)
{
unsigned int sum = 0;
unsigned int i;
/* Don't include the last field in the checksum. */
- for (i = 0; i < MSG_FIELD_MAX - 1; i++)
+ for (i = 0; i < max; i++)
sum += msg[i];
return sum;
unsigned int offset;
void __iomem *ptr = NULL;
+ /* There is no need to use this function for API v3 or later. */
+ if (unlikely(priv->dpfe_api->version >= 3)) {
+ return NULL;
+ }
+
msg_type = (response >> DRAM_MSG_TYPE_OFFSET) & DRAM_MSG_TYPE_MASK;
offset = (response >> DRAM_MSG_ADDR_OFFSET) & DRAM_MSG_ADDR_MASK;
return ptr;
}
+static void __finalize_command(struct private_data *priv)
+{
+ unsigned int release_mbox;
+
+ /*
+ * It depends on the API version which MBOX register we have to write to
+ * to signal we are done.
+ */
+ release_mbox = (priv->dpfe_api->version < 3)
+ ? REG_TO_HOST_MBOX : REG_TO_DCPU_MBOX;
+ writel_relaxed(0, priv->regs + release_mbox);
+}
+
static int __send_command(struct private_data *priv, unsigned int cmd,
u32 result[])
{
- const u32 *msg = dpfe_commands[cmd];
+ const u32 *msg = priv->dpfe_api->command[cmd];
void __iomem *regs = priv->regs;
- unsigned int i, chksum;
+ unsigned int i, chksum, chksum_idx;
int ret = 0;
u32 resp;
mutex_lock(&priv->lock);
+ /* Wait for DCPU to become ready */
+ for (i = 0; i < DELAY_LOOP_MAX; i++) {
+ resp = readl_relaxed(regs + REG_TO_HOST_MBOX);
+ if (resp == 0)
+ break;
+ msleep(1);
+ }
+ if (resp != 0) {
+ mutex_unlock(&priv->lock);
+ return -ETIMEDOUT;
+ }
+
/* Write command and arguments to message area */
for (i = 0; i < MSG_FIELD_MAX; i++)
writel_relaxed(msg[i], regs + DCPU_MSG_RAM(i));
resp = readl_relaxed(regs + REG_TO_HOST_MBOX);
if (resp > 0)
break;
- udelay(5);
+ msleep(1);
}
if (i == DELAY_LOOP_MAX) {
/* Read response data */
for (i = 0; i < MSG_FIELD_MAX; i++)
result[i] = readl_relaxed(regs + DCPU_MSG_RAM(i));
+ chksum_idx = result[MSG_ARG_COUNT] + MSG_ARG_COUNT + 1;
}
/* Tell DCPU we are done */
- writel_relaxed(0, regs + REG_TO_HOST_MBOX);
+ __finalize_command(priv);
mutex_unlock(&priv->lock);
return ret;
/* Verify response */
- chksum = get_msg_chksum(result);
- if (chksum != result[MSG_CHKSUM])
+ chksum = get_msg_chksum(result, chksum_idx);
+ if (chksum != result[chksum_idx])
resp = DCPU_RET_ERR_CHKSUM;
if (resp != DCPU_RET_SUCCESS) {
return 0;
}
- ret = request_firmware(&fw, FIRMWARE_NAME, dev);
+ /*
+ * If the firmware filename is NULL it means the boot firmware has to
+ * download the DCPU firmware for us. If that didn't work, we have to
+ * bail, since downloading it ourselves wouldn't work either.
+ */
+ if (!priv->dpfe_api->fw_name)
+ return -ENODEV;
+
+ ret = request_firmware(&fw, priv->dpfe_api->fw_name, dev);
/* request_firmware() prints its own error messages. */
if (ret)
return ret;
}
static ssize_t generic_show(unsigned int command, u32 response[],
- struct device *dev, char *buf)
+ struct private_data *priv, char *buf)
{
- struct private_data *priv;
int ret;
- priv = dev_get_drvdata(dev);
if (!priv)
return sprintf(buf, "ERROR: driver private data not set\n");
char *buf)
{
u32 response[MSG_FIELD_MAX];
+ struct private_data *priv;
unsigned int info;
ssize_t ret;
- ret = generic_show(DPFE_CMD_GET_INFO, response, dev, buf);
+ priv = dev_get_drvdata(dev);
+ ret = generic_show(DPFE_CMD_GET_INFO, response, priv, buf);
if (ret)
return ret;
u32 mr4;
ssize_t ret;
- ret = generic_show(DPFE_CMD_GET_REFRESH, response, dev, buf);
+ priv = dev_get_drvdata(dev);
+ ret = generic_show(DPFE_CMD_GET_REFRESH, response, priv, buf);
if (ret)
return ret;
- priv = dev_get_drvdata(dev);
-
info = get_msg_ptr(priv, response[MSG_ARG0], buf, &ret);
if (!info)
return ret;
- mr4 = readl_relaxed(info + DRAM_INFO_MR4) & DRAM_INFO_MR4_MASK;
+ mr4 = (readl_relaxed(info + DRAM_INFO_MR4) >> DRAM_INFO_MR4_SHIFT) &
+ DRAM_INFO_MR4_MASK;
refresh = (mr4 >> DRAM_MR4_REFRESH) & DRAM_MR4_REFRESH_MASK;
sr_abort = (mr4 >> DRAM_MR4_SR_ABORT) & DRAM_MR4_SR_ABORT_MASK;
return -EINVAL;
priv = dev_get_drvdata(dev);
-
ret = __send_command(priv, DPFE_CMD_GET_REFRESH, response);
if (ret)
return ret;
}
static ssize_t show_vendor(struct device *dev, struct device_attribute *devattr,
- char *buf)
+ char *buf)
{
u32 response[MSG_FIELD_MAX];
struct private_data *priv;
void __iomem *info;
ssize_t ret;
+ u32 mr5, mr6, mr7, mr8, err;
- ret = generic_show(DPFE_CMD_GET_VENDOR, response, dev, buf);
+ priv = dev_get_drvdata(dev);
+ ret = generic_show(DPFE_CMD_GET_VENDOR, response, priv, buf);
if (ret)
return ret;
- priv = dev_get_drvdata(dev);
-
info = get_msg_ptr(priv, response[MSG_ARG0], buf, &ret);
if (!info)
return ret;
- return sprintf(buf, "%#x %#x %#x %#x %#x\n",
- readl_relaxed(info + DRAM_VENDOR_MR5) & DRAM_VENDOR_MASK,
- readl_relaxed(info + DRAM_VENDOR_MR6) & DRAM_VENDOR_MASK,
- readl_relaxed(info + DRAM_VENDOR_MR7) & DRAM_VENDOR_MASK,
- readl_relaxed(info + DRAM_VENDOR_MR8) & DRAM_VENDOR_MASK,
- readl_relaxed(info + DRAM_VENDOR_ERROR) &
- DRAM_VENDOR_MASK);
+ mr5 = (readl_relaxed(info + DRAM_VENDOR_MR5) >> DRAM_VENDOR_SHIFT) &
+ DRAM_VENDOR_MASK;
+ mr6 = (readl_relaxed(info + DRAM_VENDOR_MR6) >> DRAM_VENDOR_SHIFT) &
+ DRAM_VENDOR_MASK;
+ mr7 = (readl_relaxed(info + DRAM_VENDOR_MR7) >> DRAM_VENDOR_SHIFT) &
+ DRAM_VENDOR_MASK;
+ mr8 = (readl_relaxed(info + DRAM_VENDOR_MR8) >> DRAM_VENDOR_SHIFT) &
+ DRAM_VENDOR_MASK;
+ err = readl_relaxed(info + DRAM_VENDOR_ERROR) & DRAM_VENDOR_MASK;
+
+ return sprintf(buf, "%#x %#x %#x %#x %#x\n", mr5, mr6, mr7, mr8, err);
+}
+
+static ssize_t show_dram(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ u32 response[MSG_FIELD_MAX];
+ struct private_data *priv;
+ ssize_t ret;
+ u32 mr4, mr5, mr6, mr7, mr8, err;
+
+ priv = dev_get_drvdata(dev);
+ ret = generic_show(DPFE_CMD_GET_REFRESH, response, priv, buf);
+ if (ret)
+ return ret;
+
+ mr4 = response[MSG_ARG0 + 0] & DRAM_INFO_MR4_MASK;
+ mr5 = response[MSG_ARG0 + 1] & DRAM_DDR_INFO_MASK;
+ mr6 = response[MSG_ARG0 + 2] & DRAM_DDR_INFO_MASK;
+ mr7 = response[MSG_ARG0 + 3] & DRAM_DDR_INFO_MASK;
+ mr8 = response[MSG_ARG0 + 4] & DRAM_DDR_INFO_MASK;
+ err = response[MSG_ARG0 + 5] & DRAM_DDR_INFO_MASK;
+
+ return sprintf(buf, "%#x %#x %#x %#x %#x %#x\n", mr4, mr5, mr6, mr7,
+ mr8, err);
}
static int brcmstb_dpfe_resume(struct platform_device *pdev)
return brcmstb_dpfe_download_firmware(pdev, &init);
}
-static DEVICE_ATTR(dpfe_info, 0444, show_info, NULL);
-static DEVICE_ATTR(dpfe_refresh, 0644, show_refresh, store_refresh);
-static DEVICE_ATTR(dpfe_vendor, 0444, show_vendor, NULL);
-static struct attribute *dpfe_attrs[] = {
- &dev_attr_dpfe_info.attr,
- &dev_attr_dpfe_refresh.attr,
- &dev_attr_dpfe_vendor.attr,
- NULL
-};
-ATTRIBUTE_GROUPS(dpfe);
-
static int brcmstb_dpfe_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
return -ENOENT;
}
+ priv->dpfe_api = of_device_get_match_data(dev);
+ if (unlikely(!priv->dpfe_api)) {
+ /*
+ * It should be impossible to end up here, but to be safe we
+ * check anyway.
+ */
+ dev_err(dev, "Couldn't determine API\n");
+ return -ENOENT;
+ }
+
ret = brcmstb_dpfe_download_firmware(pdev, &init);
- if (ret)
+ if (ret) {
+ dev_err(dev, "Couldn't download firmware -- %d\n", ret);
return ret;
+ }
- ret = sysfs_create_groups(&pdev->dev.kobj, dpfe_groups);
+ ret = sysfs_create_groups(&pdev->dev.kobj, priv->dpfe_api->sysfs_attrs);
if (!ret)
- dev_info(dev, "registered.\n");
+ dev_info(dev, "registered with API v%d.\n",
+ priv->dpfe_api->version);
return ret;
}
static int brcmstb_dpfe_remove(struct platform_device *pdev)
{
- sysfs_remove_groups(&pdev->dev.kobj, dpfe_groups);
+ struct private_data *priv = dev_get_drvdata(&pdev->dev);
+
+ sysfs_remove_groups(&pdev->dev.kobj, priv->dpfe_api->sysfs_attrs);
return 0;
}
static const struct of_device_id brcmstb_dpfe_of_match[] = {
- { .compatible = "brcm,dpfe-cpu", },
+ /* Use legacy API v2 for a select number of chips */
+ { .compatible = "brcm,bcm7268-dpfe-cpu", .data = &dpfe_api_v2 },
+ { .compatible = "brcm,bcm7271-dpfe-cpu", .data = &dpfe_api_v2 },
+ { .compatible = "brcm,bcm7278-dpfe-cpu", .data = &dpfe_api_v2 },
+ { .compatible = "brcm,bcm7211-dpfe-cpu", .data = &dpfe_api_v2 },
+ /* API v3 is the default going forward */
+ { .compatible = "brcm,dpfe-cpu", .data = &dpfe_api_v3 },
{}
};
MODULE_DEVICE_TABLE(of, brcmstb_dpfe_of_match);
git.samba.org / sfrench / cifs-2.6.git / blobdiff