static DEFINE_SPINLOCK(atiixp_lock);
-/**
- * atiixp_ratemask - compute rate mask for ATIIXP IDE
- * @drive: IDE drive to compute for
- *
- * Returns the available modes for the ATIIXP IDE controller.
- */
-
-static u8 atiixp_ratemask(ide_drive_t *drive)
-{
- u8 mode = 3;
-
- if (!eighty_ninty_three(drive))
- mode = min(mode, (u8)1);
- return mode;
-}
-
/**
* atiixp_dma_2_pio - return the PIO mode matching DMA
* @xfer_rate: transfer speed
}
}
-static int atiixp_ide_dma_host_on(ide_drive_t *drive)
+static void atiixp_dma_host_on(ide_drive_t *drive)
{
struct pci_dev *dev = drive->hwif->pci_dev;
unsigned long flags;
spin_unlock_irqrestore(&atiixp_lock, flags);
- return __ide_dma_host_on(drive);
+ ide_dma_host_on(drive);
}
-static int atiixp_ide_dma_host_off(ide_drive_t *drive)
+static void atiixp_dma_host_off(ide_drive_t *drive)
{
struct pci_dev *dev = drive->hwif->pci_dev;
unsigned long flags;
spin_unlock_irqrestore(&atiixp_lock, flags);
- return __ide_dma_host_off(drive);
+ ide_dma_host_off(drive);
}
/**
u16 tmp16;
u8 speed, pio;
- speed = ide_rate_filter(atiixp_ratemask(drive), xferspeed);
+ speed = ide_rate_filter(drive, xferspeed);
spin_lock_irqsave(&atiixp_lock, flags);
return ide_config_drive_speed(drive, speed);
}
-/**
- * atiixp_config_drive_for_dma - configure drive for DMA
- * @drive: IDE drive to configure
- *
- * Set up a ATIIXP interface channel for the best available speed.
- * We prefer UDMA if it is available and then MWDMA. If DMA is
- * not available we switch to PIO and return 0.
- */
-
-static int atiixp_config_drive_for_dma(ide_drive_t *drive)
-{
- u8 speed = ide_dma_speed(drive, atiixp_ratemask(drive));
-
- /* If no DMA speed was available then disable DMA and use PIO. */
- if (!speed) {
- u8 tspeed = ide_get_best_pio_mode(drive, 255, 5, NULL);
- speed = atiixp_dma_2_pio(XFER_PIO_0 + tspeed) + XFER_PIO_0;
- }
-
- (void) atiixp_speedproc(drive, speed);
- return ide_dma_enable(drive);
-}
-
/**
* atiixp_dma_check - set up an IDE device
* @drive: IDE drive to configure
static int atiixp_dma_check(ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- struct hd_driveid *id = drive->id;
u8 tspeed, speed;
drive->init_speed = 0;
- if ((id->capability & 1) && drive->autodma) {
-
- if (ide_use_dma(drive)) {
- if (atiixp_config_drive_for_dma(drive))
- return hwif->ide_dma_on(drive);
- }
-
- goto fast_ata_pio;
+ if (ide_tune_dma(drive))
+ return 0;
- } else if ((id->capability & 8) || (id->field_valid & 2)) {
-fast_ata_pio:
+ if (ide_use_fast_pio(drive)) {
tspeed = ide_get_best_pio_mode(drive, 255, 5, NULL);
speed = atiixp_dma_2_pio(XFER_PIO_0 + tspeed) + XFER_PIO_0;
- hwif->speedproc(drive, speed);
- return hwif->ide_dma_off_quietly(drive);
+ atiixp_speedproc(drive, speed);
}
- /* IORDY not supported */
- return 0;
+
+ return -1;
}
/**
else
hwif->udma_four = 0;
- hwif->ide_dma_host_on = &atiixp_ide_dma_host_on;
- hwif->ide_dma_host_off = &atiixp_ide_dma_host_off;
+ hwif->dma_host_on = &atiixp_dma_host_on;
+ hwif->dma_host_off = &atiixp_dma_host_off;
hwif->ide_dma_check = &atiixp_dma_check;
if (!noautodma)
hwif->autodma = 1;
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
{ 0, },
};
MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl);