w83781d.c - Part of lm_sensors, Linux kernel modules for hardware
monitoring
Copyright (c) 1998 - 2001 Frodo Looijaard <frodol@dds.nl>,
- Philip Edelbrock <phil@netroedge.com>,
- and Mark Studebaker <mdsxyz123@yahoo.com>
+ Philip Edelbrock <phil@netroedge.com>,
+ and Mark Studebaker <mdsxyz123@yahoo.com>
+ Copyright (c) 2007 Jean Delvare <khali@linux-fr.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
-#include <linux/i2c-isa.h>
+#include <linux/platform_device.h>
+#include <linux/ioport.h>
#include <linux/hwmon.h>
#include <linux/hwmon-vid.h>
+#include <linux/hwmon-sysfs.h>
#include <linux/sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <asm/io.h>
#include "lm75.h"
+/* ISA device, if found */
+static struct platform_device *pdev;
+
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25,
0x26, 0x27, 0x28, 0x29, 0x2a, 0x2b,
#define W83781D_ADDR_REG_OFFSET 5
#define W83781D_DATA_REG_OFFSET 6
-/* The W83781D registers */
-/* The W83782D registers for nr=7,8 are in bank 5 */
+/* The device registers */
+/* in nr from 0 to 8 */
#define W83781D_REG_IN_MAX(nr) ((nr < 7) ? (0x2b + (nr) * 2) : \
(0x554 + (((nr) - 7) * 2)))
#define W83781D_REG_IN_MIN(nr) ((nr < 7) ? (0x2c + (nr) * 2) : \
#define W83781D_REG_IN(nr) ((nr < 7) ? (0x20 + (nr)) : \
(0x550 + (nr) - 7))
-#define W83781D_REG_FAN_MIN(nr) (0x3a + (nr))
-#define W83781D_REG_FAN(nr) (0x27 + (nr))
+/* fan nr from 0 to 2 */
+#define W83781D_REG_FAN_MIN(nr) (0x3b + (nr))
+#define W83781D_REG_FAN(nr) (0x28 + (nr))
#define W83781D_REG_BANK 0x4E
#define W83781D_REG_TEMP2_CONFIG 0x152
#define W83781D_REG_TEMP3_CONFIG 0x252
+/* temp nr from 1 to 3 */
#define W83781D_REG_TEMP(nr) ((nr == 3) ? (0x0250) : \
((nr == 2) ? (0x0150) : \
(0x27)))
#define W83781D_REG_VBAT 0x5D
/* PWM 782D (1-4) and 783S (1-2) only */
-#define W83781D_REG_PWM1 0x5B /* 782d and 783s/627hf datasheets disagree */
- /* on which is which; */
-#define W83781D_REG_PWM2 0x5A /* We follow the 782d convention here, */
- /* However 782d is probably wrong. */
-#define W83781D_REG_PWM3 0x5E
-#define W83781D_REG_PWM4 0x5F
+static const u8 W83781D_REG_PWM[] = { 0x5B, 0x5A, 0x5E, 0x5F };
#define W83781D_REG_PWMCLK12 0x5C
#define W83781D_REG_PWMCLK34 0x45C
-static const u8 regpwm[] = { W83781D_REG_PWM1, W83781D_REG_PWM2,
- W83781D_REG_PWM3, W83781D_REG_PWM4
-};
-
-#define W83781D_REG_PWM(nr) (regpwm[(nr) - 1])
#define W83781D_REG_I2C_ADDR 0x48
#define W83781D_REG_I2C_SUBADDR 0x4A
#define W83781D_REG_RT_IDX 0x50
#define W83781D_REG_RT_VAL 0x51
-/* Conversions. Rounding and limit checking is only done on the TO_REG
- variants. Note that you should be a bit careful with which arguments
- these macros are called: arguments may be evaluated more than once.
- Fixing this is just not worth it. */
-#define IN_TO_REG(val) (SENSORS_LIMIT((((val) * 10 + 8)/16),0,255))
-#define IN_FROM_REG(val) (((val) * 16) / 10)
+/* Conversions */
+#define IN_TO_REG(val) SENSORS_LIMIT(((val) + 8) / 16, 0, 255)
+#define IN_FROM_REG(val) ((val) * 16)
static inline u8
FAN_TO_REG(long rpm, int div)
return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
}
-#define FAN_FROM_REG(val,div) ((val) == 0 ? -1 : \
- ((val) == 255 ? 0 : \
- 1350000 / ((val) * (div))))
+static inline long
+FAN_FROM_REG(u8 val, int div)
+{
+ if (val == 0)
+ return -1;
+ if (val == 255)
+ return 0;
+ return 1350000 / (val * div);
+}
-#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val) < 0 ? (val)+0x100*1000 \
- : (val)) / 1000, 0, 0xff))
-#define TEMP_FROM_REG(val) (((val) & 0x80 ? (val)-0x100 : (val)) * 1000)
+#define TEMP_TO_REG(val) SENSORS_LIMIT((val) / 1000, -127, 128)
+#define TEMP_FROM_REG(val) ((val) * 1000)
-#define PWM_FROM_REG(val) (val)
-#define PWM_TO_REG(val) (SENSORS_LIMIT((val),0,255))
#define BEEP_MASK_FROM_REG(val,type) ((type) == as99127f ? \
(val) ^ 0x7fff : (val))
#define BEEP_MASK_TO_REG(val,type) ((type) == as99127f ? \
(~(val)) & 0x7fff : (val) & 0xffffff)
-#define BEEP_ENABLE_TO_REG(val) ((val) ? 1 : 0)
-#define BEEP_ENABLE_FROM_REG(val) ((val) ? 1 : 0)
-
#define DIV_FROM_REG(val) (1 << (val))
static inline u8
break;
val >>= 1;
}
- return ((u8) i);
+ return i;
}
/* There are some complications in a module like this. First off, W83781D chips
a bit - except if there could be more than one SMBus. Groan. No solution
for this yet. */
-/* This module may seem overly long and complicated. In fact, it is not so
- bad. Quite a lot of bookkeeping is done. A real driver can often cut
- some corners. */
-
-/* For each registered W83781D, we need to keep some data in memory. That
- data is pointed to by w83781d_list[NR]->data. The structure itself is
- dynamically allocated, at the same time when a new w83781d client is
- allocated. */
+/* For ISA chips, we abuse the i2c_client addr and name fields. We also use
+ the driver field to differentiate between I2C and ISA chips. */
struct w83781d_data {
struct i2c_client client;
struct class_device *class_dev;
u8 in_min[9]; /* Register value - 8 & 9 for 782D only */
u8 fan[3]; /* Register value */
u8 fan_min[3]; /* Register value */
- u8 temp;
- u8 temp_max; /* Register value */
- u8 temp_max_hyst; /* Register value */
+ s8 temp; /* Register value */
+ s8 temp_max; /* Register value */
+ s8 temp_max_hyst; /* Register value */
u16 temp_add[2]; /* Register value */
u16 temp_max_add[2]; /* Register value */
u16 temp_max_hyst_add[2]; /* Register value */
u32 beep_mask; /* Register encoding, combined */
u8 beep_enable; /* Boolean */
u8 pwm[4]; /* Register value */
- u8 pwmenable[4]; /* Boolean */
+ u8 pwm2_enable; /* Boolean */
u16 sens[3]; /* 782D/783S only.
1 = pentium diode; 2 = 3904 diode;
3000-5000 = thermistor beta.
};
static int w83781d_attach_adapter(struct i2c_adapter *adapter);
-static int w83781d_isa_attach_adapter(struct i2c_adapter *adapter);
static int w83781d_detect(struct i2c_adapter *adapter, int address, int kind);
static int w83781d_detach_client(struct i2c_client *client);
-static int w83781d_read_value(struct i2c_client *client, u16 reg);
-static int w83781d_write_value(struct i2c_client *client, u16 reg, u16 value);
+static int __devinit w83781d_isa_probe(struct platform_device *pdev);
+static int __devexit w83781d_isa_remove(struct platform_device *pdev);
+
+static int w83781d_read_value(struct w83781d_data *data, u16 reg);
+static int w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value);
static struct w83781d_data *w83781d_update_device(struct device *dev);
-static void w83781d_init_client(struct i2c_client *client);
+static void w83781d_init_device(struct device *dev);
static struct i2c_driver w83781d_driver = {
.driver = {
.detach_client = w83781d_detach_client,
};
-static struct i2c_driver w83781d_isa_driver = {
+static struct platform_driver w83781d_isa_driver = {
.driver = {
.owner = THIS_MODULE,
- .name = "w83781d-isa",
+ .name = "w83781d",
},
- .attach_adapter = w83781d_isa_attach_adapter,
- .detach_client = w83781d_detach_client,
+ .probe = w83781d_isa_probe,
+ .remove = w83781d_isa_remove,
};
/* following are the sysfs callback functions */
#define show_in_reg(reg) \
-static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
+static ssize_t show_##reg (struct device *dev, struct device_attribute *da, \
+ char *buf) \
{ \
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
struct w83781d_data *data = w83781d_update_device(dev); \
- return sprintf(buf,"%ld\n", (long)IN_FROM_REG(data->reg[nr] * 10)); \
+ return sprintf(buf, "%ld\n", \
+ (long)IN_FROM_REG(data->reg[attr->index])); \
}
show_in_reg(in);
show_in_reg(in_min);
show_in_reg(in_max);
#define store_in_reg(REG, reg) \
-static ssize_t store_in_##reg (struct device *dev, const char *buf, size_t count, int nr) \
+static ssize_t store_in_##reg (struct device *dev, struct device_attribute \
+ *da, const char *buf, size_t count) \
{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct w83781d_data *data = i2c_get_clientdata(client); \
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
+ struct w83781d_data *data = dev_get_drvdata(dev); \
+ int nr = attr->index; \
u32 val; \
\
- val = simple_strtoul(buf, NULL, 10) / 10; \
+ val = simple_strtoul(buf, NULL, 10); \
\
mutex_lock(&data->update_lock); \
data->in_##reg[nr] = IN_TO_REG(val); \
- w83781d_write_value(client, W83781D_REG_IN_##REG(nr), data->in_##reg[nr]); \
+ w83781d_write_value(data, W83781D_REG_IN_##REG(nr), data->in_##reg[nr]); \
\
mutex_unlock(&data->update_lock); \
return count; \
store_in_reg(MIN, min);
store_in_reg(MAX, max);
-#define sysfs_in_offset(offset) \
-static ssize_t \
-show_regs_in_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_in(dev, buf, offset); \
-} \
-static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_regs_in_##offset, NULL);
-
-#define sysfs_in_reg_offset(reg, offset) \
-static ssize_t show_regs_in_##reg##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_in_##reg (dev, buf, offset); \
-} \
-static ssize_t store_regs_in_##reg##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
-{ \
- return store_in_##reg (dev, buf, count, offset); \
-} \
-static DEVICE_ATTR(in##offset##_##reg, S_IRUGO| S_IWUSR, show_regs_in_##reg##offset, store_regs_in_##reg##offset);
-
#define sysfs_in_offsets(offset) \
-sysfs_in_offset(offset); \
-sysfs_in_reg_offset(min, offset); \
-sysfs_in_reg_offset(max, offset);
+static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
+ show_in, NULL, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
+ show_in_min, store_in_min, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
+ show_in_max, store_in_max, offset)
sysfs_in_offsets(0);
sysfs_in_offsets(1);
sysfs_in_offsets(8);
#define show_fan_reg(reg) \
-static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
+static ssize_t show_##reg (struct device *dev, struct device_attribute *da, \
+ char *buf) \
{ \
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
struct w83781d_data *data = w83781d_update_device(dev); \
return sprintf(buf,"%ld\n", \
- FAN_FROM_REG(data->reg[nr-1], (long)DIV_FROM_REG(data->fan_div[nr-1]))); \
+ FAN_FROM_REG(data->reg[attr->index], \
+ DIV_FROM_REG(data->fan_div[attr->index]))); \
}
show_fan_reg(fan);
show_fan_reg(fan_min);
static ssize_t
-store_fan_min(struct device *dev, const char *buf, size_t count, int nr)
+store_fan_min(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct w83781d_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct w83781d_data *data = dev_get_drvdata(dev);
+ int nr = attr->index;
u32 val;
val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
- data->fan_min[nr - 1] =
- FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr - 1]));
- w83781d_write_value(client, W83781D_REG_FAN_MIN(nr),
- data->fan_min[nr - 1]);
+ data->fan_min[nr] =
+ FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
+ w83781d_write_value(data, W83781D_REG_FAN_MIN(nr),
+ data->fan_min[nr]);
mutex_unlock(&data->update_lock);
return count;
}
-#define sysfs_fan_offset(offset) \
-static ssize_t show_regs_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_fan(dev, buf, offset); \
-} \
-static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_regs_fan_##offset, NULL);
-
-#define sysfs_fan_min_offset(offset) \
-static ssize_t show_regs_fan_min##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_fan_min(dev, buf, offset); \
-} \
-static ssize_t store_regs_fan_min##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
-{ \
- return store_fan_min(dev, buf, count, offset); \
-} \
-static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, show_regs_fan_min##offset, store_regs_fan_min##offset);
-
-sysfs_fan_offset(1);
-sysfs_fan_min_offset(1);
-sysfs_fan_offset(2);
-sysfs_fan_min_offset(2);
-sysfs_fan_offset(3);
-sysfs_fan_min_offset(3);
+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO | S_IWUSR,
+ show_fan_min, store_fan_min, 0);
+static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO | S_IWUSR,
+ show_fan_min, store_fan_min, 1);
+static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan3_min, S_IRUGO | S_IWUSR,
+ show_fan_min, store_fan_min, 2);
#define show_temp_reg(reg) \
-static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
+static ssize_t show_##reg (struct device *dev, struct device_attribute *da, \
+ char *buf) \
{ \
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
struct w83781d_data *data = w83781d_update_device(dev); \
+ int nr = attr->index; \
if (nr >= 2) { /* TEMP2 and TEMP3 */ \
return sprintf(buf,"%d\n", \
LM75_TEMP_FROM_REG(data->reg##_add[nr-2])); \
show_temp_reg(temp_max_hyst);
#define store_temp_reg(REG, reg) \
-static ssize_t store_temp_##reg (struct device *dev, const char *buf, size_t count, int nr) \
+static ssize_t store_temp_##reg (struct device *dev, \
+ struct device_attribute *da, const char *buf, size_t count) \
{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct w83781d_data *data = i2c_get_clientdata(client); \
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
+ struct w83781d_data *data = dev_get_drvdata(dev); \
+ int nr = attr->index; \
s32 val; \
\
val = simple_strtol(buf, NULL, 10); \
\
if (nr >= 2) { /* TEMP2 and TEMP3 */ \
data->temp_##reg##_add[nr-2] = LM75_TEMP_TO_REG(val); \
- w83781d_write_value(client, W83781D_REG_TEMP_##REG(nr), \
+ w83781d_write_value(data, W83781D_REG_TEMP_##REG(nr), \
data->temp_##reg##_add[nr-2]); \
} else { /* TEMP1 */ \
data->temp_##reg = TEMP_TO_REG(val); \
- w83781d_write_value(client, W83781D_REG_TEMP_##REG(nr), \
+ w83781d_write_value(data, W83781D_REG_TEMP_##REG(nr), \
data->temp_##reg); \
} \
\
store_temp_reg(OVER, max);
store_temp_reg(HYST, max_hyst);
-#define sysfs_temp_offset(offset) \
-static ssize_t \
-show_regs_temp_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_temp(dev, buf, offset); \
-} \
-static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_regs_temp_##offset, NULL);
-
-#define sysfs_temp_reg_offset(reg, offset) \
-static ssize_t show_regs_temp_##reg##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_temp_##reg (dev, buf, offset); \
-} \
-static ssize_t store_regs_temp_##reg##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
-{ \
- return store_temp_##reg (dev, buf, count, offset); \
-} \
-static DEVICE_ATTR(temp##offset##_##reg, S_IRUGO| S_IWUSR, show_regs_temp_##reg##offset, store_regs_temp_##reg##offset);
-
#define sysfs_temp_offsets(offset) \
-sysfs_temp_offset(offset); \
-sysfs_temp_reg_offset(max, offset); \
-sysfs_temp_reg_offset(max_hyst, offset);
+static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
+ show_temp, NULL, offset); \
+static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
+ show_temp_max, store_temp_max, offset); \
+static SENSOR_DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO | S_IWUSR, \
+ show_temp_max_hyst, store_temp_max_hyst, offset);
sysfs_temp_offsets(1);
sysfs_temp_offsets(2);
static ssize_t
store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct w83781d_data *data = i2c_get_clientdata(client);
+ struct w83781d_data *data = dev_get_drvdata(dev);
u32 val;
val = simple_strtoul(buf, NULL, 10);
static ssize_t show_beep_enable (struct device *dev, struct device_attribute *attr, char *buf)
{
struct w83781d_data *data = w83781d_update_device(dev);
- return sprintf(buf, "%ld\n",
- (long)BEEP_ENABLE_FROM_REG(data->beep_enable));
+ return sprintf(buf, "%ld\n", (long)data->beep_enable);
}
-#define BEEP_ENABLE 0 /* Store beep_enable */
-#define BEEP_MASK 1 /* Store beep_mask */
-
static ssize_t
-store_beep_reg(struct device *dev, const char *buf, size_t count,
- int update_mask)
+store_beep_mask(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct w83781d_data *data = i2c_get_clientdata(client);
- u32 val, val2;
+ struct w83781d_data *data = dev_get_drvdata(dev);
+ u32 val;
val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
+ data->beep_mask = BEEP_MASK_TO_REG(val, data->type);
+ w83781d_write_value(data, W83781D_REG_BEEP_INTS1,
+ data->beep_mask & 0xff);
+ w83781d_write_value(data, W83781D_REG_BEEP_INTS2,
+ ((data->beep_mask >> 8) & 0x7f)
+ | data->beep_enable << 7);
+ if (data->type != w83781d && data->type != as99127f) {
+ w83781d_write_value(data, W83781D_REG_BEEP_INTS3,
+ ((data->beep_mask) >> 16) & 0xff);
+ }
+ mutex_unlock(&data->update_lock);
- if (update_mask == BEEP_MASK) { /* We are storing beep_mask */
- data->beep_mask = BEEP_MASK_TO_REG(val, data->type);
- w83781d_write_value(client, W83781D_REG_BEEP_INTS1,
- data->beep_mask & 0xff);
-
- if ((data->type != w83781d) && (data->type != as99127f)) {
- w83781d_write_value(client, W83781D_REG_BEEP_INTS3,
- ((data->beep_mask) >> 16) & 0xff);
- }
+ return count;
+}
- val2 = (data->beep_mask >> 8) & 0x7f;
- } else { /* We are storing beep_enable */
- val2 = w83781d_read_value(client, W83781D_REG_BEEP_INTS2) & 0x7f;
- data->beep_enable = BEEP_ENABLE_TO_REG(val);
- }
+static ssize_t
+store_beep_enable(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct w83781d_data *data = dev_get_drvdata(dev);
+ u32 val;
- w83781d_write_value(client, W83781D_REG_BEEP_INTS2,
- val2 | data->beep_enable << 7);
+ val = simple_strtoul(buf, NULL, 10);
+ if (val != 0 && val != 1)
+ return -EINVAL;
+ mutex_lock(&data->update_lock);
+ data->beep_enable = val;
+ val = w83781d_read_value(data, W83781D_REG_BEEP_INTS2) & 0x7f;
+ val |= data->beep_enable << 7;
+ w83781d_write_value(data, W83781D_REG_BEEP_INTS2, val);
mutex_unlock(&data->update_lock);
+
return count;
}
-#define sysfs_beep(REG, reg) \
-static ssize_t show_regs_beep_##reg (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_beep_##reg(dev, attr, buf); \
-} \
-static ssize_t store_regs_beep_##reg (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
-{ \
- return store_beep_reg(dev, buf, count, BEEP_##REG); \
-} \
-static DEVICE_ATTR(beep_##reg, S_IRUGO | S_IWUSR, show_regs_beep_##reg, store_regs_beep_##reg);
-
-sysfs_beep(ENABLE, enable);
-sysfs_beep(MASK, mask);
+static DEVICE_ATTR(beep_mask, S_IRUGO | S_IWUSR,
+ show_beep_mask, store_beep_mask);
+static DEVICE_ATTR(beep_enable, S_IRUGO | S_IWUSR,
+ show_beep_enable, store_beep_enable);
static ssize_t
-show_fan_div_reg(struct device *dev, char *buf, int nr)
+show_fan_div(struct device *dev, struct device_attribute *da, char *buf)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
struct w83781d_data *data = w83781d_update_device(dev);
return sprintf(buf, "%ld\n",
- (long) DIV_FROM_REG(data->fan_div[nr - 1]));
+ (long) DIV_FROM_REG(data->fan_div[attr->index]));
}
/* Note: we save and restore the fan minimum here, because its value is
least surprise; the user doesn't expect the fan minimum to change just
because the divisor changed. */
static ssize_t
-store_fan_div_reg(struct device *dev, const char *buf, size_t count, int nr)
+store_fan_div(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct w83781d_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct w83781d_data *data = dev_get_drvdata(dev);
unsigned long min;
+ int nr = attr->index;
u8 reg;
unsigned long val = simple_strtoul(buf, NULL, 10);
data->fan_div[nr] = DIV_TO_REG(val, data->type);
- reg = (w83781d_read_value(client, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV)
+ reg = (w83781d_read_value(data, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV)
& (nr==0 ? 0xcf : 0x3f))
| ((data->fan_div[nr] & 0x03) << (nr==0 ? 4 : 6));
- w83781d_write_value(client, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg);
+ w83781d_write_value(data, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg);
/* w83781d and as99127f don't have extended divisor bits */
if (data->type != w83781d && data->type != as99127f) {
- reg = (w83781d_read_value(client, W83781D_REG_VBAT)
+ reg = (w83781d_read_value(data, W83781D_REG_VBAT)
& ~(1 << (5 + nr)))
| ((data->fan_div[nr] & 0x04) << (3 + nr));
- w83781d_write_value(client, W83781D_REG_VBAT, reg);
+ w83781d_write_value(data, W83781D_REG_VBAT, reg);
}
/* Restore fan_min */
data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
- w83781d_write_value(client, W83781D_REG_FAN_MIN(nr+1), data->fan_min[nr]);
+ w83781d_write_value(data, W83781D_REG_FAN_MIN(nr), data->fan_min[nr]);
mutex_unlock(&data->update_lock);
return count;
}
-#define sysfs_fan_div(offset) \
-static ssize_t show_regs_fan_div_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_fan_div_reg(dev, buf, offset); \
-} \
-static ssize_t store_regs_fan_div_##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
-{ \
- return store_fan_div_reg(dev, buf, count, offset - 1); \
-} \
-static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, show_regs_fan_div_##offset, store_regs_fan_div_##offset);
-
-sysfs_fan_div(1);
-sysfs_fan_div(2);
-sysfs_fan_div(3);
+static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR,
+ show_fan_div, store_fan_div, 0);
+static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR,
+ show_fan_div, store_fan_div, 1);
+static SENSOR_DEVICE_ATTR(fan3_div, S_IRUGO | S_IWUSR,
+ show_fan_div, store_fan_div, 2);
static ssize_t
-show_pwm_reg(struct device *dev, char *buf, int nr)
+show_pwm(struct device *dev, struct device_attribute *da, char *buf)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
struct w83781d_data *data = w83781d_update_device(dev);
- return sprintf(buf, "%ld\n", (long) PWM_FROM_REG(data->pwm[nr - 1]));
+ return sprintf(buf, "%d\n", (int)data->pwm[attr->index]);
}
static ssize_t
-show_pwmenable_reg(struct device *dev, char *buf, int nr)
+show_pwm2_enable(struct device *dev, struct device_attribute *da, char *buf)
{
struct w83781d_data *data = w83781d_update_device(dev);
- return sprintf(buf, "%ld\n", (long) data->pwmenable[nr - 1]);
+ return sprintf(buf, "%d\n", (int)data->pwm2_enable);
}
static ssize_t
-store_pwm_reg(struct device *dev, const char *buf, size_t count, int nr)
+store_pwm(struct device *dev, struct device_attribute *da, const char *buf,
+ size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct w83781d_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct w83781d_data *data = dev_get_drvdata(dev);
+ int nr = attr->index;
u32 val;
val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
- data->pwm[nr - 1] = PWM_TO_REG(val);
- w83781d_write_value(client, W83781D_REG_PWM(nr), data->pwm[nr - 1]);
+ data->pwm[nr] = SENSORS_LIMIT(val, 0, 255);
+ w83781d_write_value(data, W83781D_REG_PWM[nr], data->pwm[nr]);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t
-store_pwmenable_reg(struct device *dev, const char *buf, size_t count, int nr)
+store_pwm2_enable(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct w83781d_data *data = i2c_get_clientdata(client);
+ struct w83781d_data *data = dev_get_drvdata(dev);
u32 val, reg;
val = simple_strtoul(buf, NULL, 10);
switch (val) {
case 0:
case 1:
- reg = w83781d_read_value(client, W83781D_REG_PWMCLK12);
- w83781d_write_value(client, W83781D_REG_PWMCLK12,
+ reg = w83781d_read_value(data, W83781D_REG_PWMCLK12);
+ w83781d_write_value(data, W83781D_REG_PWMCLK12,
(reg & 0xf7) | (val << 3));
- reg = w83781d_read_value(client, W83781D_REG_BEEP_CONFIG);
- w83781d_write_value(client, W83781D_REG_BEEP_CONFIG,
+ reg = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG);
+ w83781d_write_value(data, W83781D_REG_BEEP_CONFIG,
(reg & 0xef) | (!val << 4));
- data->pwmenable[nr - 1] = val;
+ data->pwm2_enable = val;
break;
default:
return count;
}
-#define sysfs_pwm(offset) \
-static ssize_t show_regs_pwm_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_pwm_reg(dev, buf, offset); \
-} \
-static ssize_t store_regs_pwm_##offset (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return store_pwm_reg(dev, buf, count, offset); \
-} \
-static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
- show_regs_pwm_##offset, store_regs_pwm_##offset);
-
-#define sysfs_pwmenable(offset) \
-static ssize_t show_regs_pwmenable_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_pwmenable_reg(dev, buf, offset); \
-} \
-static ssize_t store_regs_pwmenable_##offset (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return store_pwmenable_reg(dev, buf, count, offset); \
-} \
-static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \
- show_regs_pwmenable_##offset, store_regs_pwmenable_##offset);
-
-sysfs_pwm(1);
-sysfs_pwm(2);
-sysfs_pwmenable(2); /* only PWM2 can be enabled/disabled */
-sysfs_pwm(3);
-sysfs_pwm(4);
+static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 0);
+static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 1);
+static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 2);
+static SENSOR_DEVICE_ATTR(pwm4, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 3);
+/* only PWM2 can be enabled/disabled */
+static DEVICE_ATTR(pwm2_enable, S_IRUGO | S_IWUSR,
+ show_pwm2_enable, store_pwm2_enable);
static ssize_t
-show_sensor_reg(struct device *dev, char *buf, int nr)
+show_sensor(struct device *dev, struct device_attribute *da, char *buf)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
struct w83781d_data *data = w83781d_update_device(dev);
- return sprintf(buf, "%ld\n", (long) data->sens[nr - 1]);
+ return sprintf(buf, "%d\n", (int)data->sens[attr->index]);
}
static ssize_t
-store_sensor_reg(struct device *dev, const char *buf, size_t count, int nr)
+store_sensor(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct w83781d_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct w83781d_data *data = dev_get_drvdata(dev);
+ int nr = attr->index;
u32 val, tmp;
val = simple_strtoul(buf, NULL, 10);
switch (val) {
case 1: /* PII/Celeron diode */
- tmp = w83781d_read_value(client, W83781D_REG_SCFG1);
- w83781d_write_value(client, W83781D_REG_SCFG1,
- tmp | BIT_SCFG1[nr - 1]);
- tmp = w83781d_read_value(client, W83781D_REG_SCFG2);
- w83781d_write_value(client, W83781D_REG_SCFG2,
- tmp | BIT_SCFG2[nr - 1]);
- data->sens[nr - 1] = val;
+ tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
+ w83781d_write_value(data, W83781D_REG_SCFG1,
+ tmp | BIT_SCFG1[nr]);
+ tmp = w83781d_read_value(data, W83781D_REG_SCFG2);
+ w83781d_write_value(data, W83781D_REG_SCFG2,
+ tmp | BIT_SCFG2[nr]);
+ data->sens[nr] = val;
break;
case 2: /* 3904 */
- tmp = w83781d_read_value(client, W83781D_REG_SCFG1);
- w83781d_write_value(client, W83781D_REG_SCFG1,
- tmp | BIT_SCFG1[nr - 1]);
- tmp = w83781d_read_value(client, W83781D_REG_SCFG2);
- w83781d_write_value(client, W83781D_REG_SCFG2,
- tmp & ~BIT_SCFG2[nr - 1]);
- data->sens[nr - 1] = val;
+ tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
+ w83781d_write_value(data, W83781D_REG_SCFG1,
+ tmp | BIT_SCFG1[nr]);
+ tmp = w83781d_read_value(data, W83781D_REG_SCFG2);
+ w83781d_write_value(data, W83781D_REG_SCFG2,
+ tmp & ~BIT_SCFG2[nr]);
+ data->sens[nr] = val;
break;
case W83781D_DEFAULT_BETA: /* thermistor */
- tmp = w83781d_read_value(client, W83781D_REG_SCFG1);
- w83781d_write_value(client, W83781D_REG_SCFG1,
- tmp & ~BIT_SCFG1[nr - 1]);
- data->sens[nr - 1] = val;
+ tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
+ w83781d_write_value(data, W83781D_REG_SCFG1,
+ tmp & ~BIT_SCFG1[nr]);
+ data->sens[nr] = val;
break;
default:
dev_err(dev, "Invalid sensor type %ld; must be 1, 2, or %d\n",
return count;
}
-#define sysfs_sensor(offset) \
-static ssize_t show_regs_sensor_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- return show_sensor_reg(dev, buf, offset); \
-} \
-static ssize_t store_regs_sensor_##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
-{ \
- return store_sensor_reg(dev, buf, count, offset); \
-} \
-static DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, show_regs_sensor_##offset, store_regs_sensor_##offset);
+static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO | S_IWUSR,
+ show_sensor, store_sensor, 0);
+static SENSOR_DEVICE_ATTR(temp2_type, S_IRUGO | S_IWUSR,
+ show_sensor, store_sensor, 1);
+static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO | S_IWUSR,
+ show_sensor, store_sensor, 2);
-sysfs_sensor(1);
-sysfs_sensor(2);
-sysfs_sensor(3);
+/* I2C devices get this name attribute automatically, but for ISA devices
+ we must create it by ourselves. */
+static ssize_t
+show_name(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ struct w83781d_data *data = dev_get_drvdata(dev);
+ return sprintf(buf, "%s\n", data->client.name);
+}
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
/* This function is called when:
* w83781d_driver is inserted (when this module is loaded), for each
return i2c_probe(adapter, &addr_data, w83781d_detect);
}
-static int
-w83781d_isa_attach_adapter(struct i2c_adapter *adapter)
-{
- return w83781d_detect(adapter, isa_address, -1);
-}
-
/* Assumes that adapter is of I2C, not ISA variety.
* OTHERWISE DON'T CALL THIS
*/
goto ERROR_SC_1;
}
}
- w83781d_write_value(new_client, W83781D_REG_I2C_SUBADDR,
+ w83781d_write_value(data, W83781D_REG_I2C_SUBADDR,
(force_subclients[2] & 0x07) |
((force_subclients[3] & 0x07) << 4));
data->lm75[0]->addr = force_subclients[2];
} else {
- val1 = w83781d_read_value(new_client, W83781D_REG_I2C_SUBADDR);
+ val1 = w83781d_read_value(data, W83781D_REG_I2C_SUBADDR);
data->lm75[0]->addr = 0x48 + (val1 & 0x07);
}
return err;
}
-#define IN_UNIT_ATTRS(X) \
- &dev_attr_in##X##_input.attr, \
- &dev_attr_in##X##_min.attr, \
- &dev_attr_in##X##_max.attr
+#define IN_UNIT_ATTRS(X) \
+ &sensor_dev_attr_in##X##_input.dev_attr.attr, \
+ &sensor_dev_attr_in##X##_min.dev_attr.attr, \
+ &sensor_dev_attr_in##X##_max.dev_attr.attr
-#define FAN_UNIT_ATTRS(X) \
- &dev_attr_fan##X##_input.attr, \
- &dev_attr_fan##X##_min.attr, \
- &dev_attr_fan##X##_div.attr
+#define FAN_UNIT_ATTRS(X) \
+ &sensor_dev_attr_fan##X##_input.dev_attr.attr, \
+ &sensor_dev_attr_fan##X##_min.dev_attr.attr, \
+ &sensor_dev_attr_fan##X##_div.dev_attr.attr
-#define TEMP_UNIT_ATTRS(X) \
- &dev_attr_temp##X##_input.attr, \
- &dev_attr_temp##X##_max.attr, \
- &dev_attr_temp##X##_max_hyst.attr
+#define TEMP_UNIT_ATTRS(X) \
+ &sensor_dev_attr_temp##X##_input.dev_attr.attr, \
+ &sensor_dev_attr_temp##X##_max.dev_attr.attr, \
+ &sensor_dev_attr_temp##X##_max_hyst.dev_attr.attr
static struct attribute* w83781d_attributes[] = {
IN_UNIT_ATTRS(0),
IN_UNIT_ATTRS(7),
IN_UNIT_ATTRS(8),
TEMP_UNIT_ATTRS(3),
- &dev_attr_pwm1.attr,
- &dev_attr_pwm2.attr,
+ &sensor_dev_attr_pwm1.dev_attr.attr,
+ &sensor_dev_attr_pwm2.dev_attr.attr,
+ &sensor_dev_attr_pwm3.dev_attr.attr,
+ &sensor_dev_attr_pwm4.dev_attr.attr,
&dev_attr_pwm2_enable.attr,
- &dev_attr_pwm3.attr,
- &dev_attr_pwm4.attr,
- &dev_attr_temp1_type.attr,
- &dev_attr_temp2_type.attr,
- &dev_attr_temp3_type.attr,
+ &sensor_dev_attr_temp1_type.dev_attr.attr,
+ &sensor_dev_attr_temp2_type.dev_attr.attr,
+ &sensor_dev_attr_temp3_type.dev_attr.attr,
NULL
};
static const struct attribute_group w83781d_group_opt = {
.attrs = w83781d_attributes_opt,
};
+/* No clean up is done on error, it's up to the caller */
static int
-w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
+w83781d_create_files(struct device *dev, int kind, int is_isa)
{
- int i = 0, val1 = 0, val2;
- struct i2c_client *client;
- struct device *dev;
- struct w83781d_data *data;
int err;
- const char *client_name = "";
- int is_isa = i2c_is_isa_adapter(adapter);
- enum vendor { winbond, asus } vendid;
- if (!is_isa
- && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
- err = -EINVAL;
- goto ERROR0;
+ if ((err = sysfs_create_group(&dev->kobj, &w83781d_group)))
+ return err;
+
+ if (kind != w83783s) {
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_in1_input.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in1_min.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in1_max.dev_attr)))
+ return err;
+ }
+ if (kind != as99127f && kind != w83781d && kind != w83783s) {
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_in7_input.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in7_min.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in7_max.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in8_input.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in8_min.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in8_max.dev_attr)))
+ return err;
+ }
+ if (kind != w83783s) {
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_temp3_input.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_temp3_max.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_temp3_max_hyst.dev_attr)))
+ return err;
}
- /* Prevent users from forcing a kind for a bus it isn't supposed
- to possibly be on */
- if (is_isa && (kind == as99127f || kind == w83783s)) {
- dev_err(&adapter->dev,
- "Cannot force I2C-only chip for ISA address 0x%02x.\n",
- address);
- err = -EINVAL;
- goto ERROR0;
+ if (kind != w83781d && kind != as99127f) {
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_pwm1.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_pwm2.dev_attr))
+ || (err = device_create_file(dev, &dev_attr_pwm2_enable)))
+ return err;
}
-
- if (is_isa)
- if (!request_region(address, W83781D_EXTENT,
- w83781d_isa_driver.driver.name)) {
- dev_dbg(&adapter->dev, "Request of region "
- "0x%x-0x%x for w83781d failed\n", address,
- address + W83781D_EXTENT - 1);
- err = -EBUSY;
- goto ERROR0;
+ if (kind == w83782d && !is_isa) {
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_pwm3.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_pwm4.dev_attr)))
+ return err;
+ }
+
+ if (kind != as99127f && kind != w83781d) {
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_temp1_type.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_temp2_type.dev_attr)))
+ return err;
+ if (kind != w83783s) {
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_temp3_type.dev_attr)))
+ return err;
}
+ }
- /* Probe whether there is anything available on this address. Already
- done for SMBus clients */
- if (kind < 0) {
- if (is_isa) {
+ if (is_isa) {
+ err = device_create_file(&pdev->dev, &dev_attr_name);
+ if (err)
+ return err;
+ }
-#define REALLY_SLOW_IO
- /* We need the timeouts for at least some LM78-like
- chips. But only if we read 'undefined' registers. */
- i = inb_p(address + 1);
- if (inb_p(address + 2) != i
- || inb_p(address + 3) != i
- || inb_p(address + 7) != i) {
- dev_dbg(&adapter->dev, "Detection of w83781d "
- "chip failed at step 1\n");
- err = -ENODEV;
- goto ERROR1;
- }
-#undef REALLY_SLOW_IO
+ return 0;
+}
- /* Let's just hope nothing breaks here */
- i = inb_p(address + 5) & 0x7f;
- outb_p(~i & 0x7f, address + 5);
- val2 = inb_p(address + 5) & 0x7f;
- if (val2 != (~i & 0x7f)) {
- outb_p(i, address + 5);
- dev_dbg(&adapter->dev, "Detection of w83781d "
- "chip failed at step 2 (0x%x != "
- "0x%x at 0x%x)\n", val2, ~i & 0x7f,
- address + 5);
- err = -ENODEV;
- goto ERROR1;
- }
- }
+static int
+w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+ int val1 = 0, val2;
+ struct i2c_client *client;
+ struct device *dev;
+ struct w83781d_data *data;
+ int err;
+ const char *client_name = "";
+ enum vendor { winbond, asus } vendid;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+ err = -EINVAL;
+ goto ERROR1;
}
/* OK. For now, we presume we have a valid client. We now create the
client->addr = address;
mutex_init(&data->lock);
client->adapter = adapter;
- client->driver = is_isa ? &w83781d_isa_driver : &w83781d_driver;
- client->flags = 0;
+ client->driver = &w83781d_driver;
dev = &client->dev;
/* Now, we do the remaining detection. */
force_*=... parameter, and the Winbond will be reset to the right
bank. */
if (kind < 0) {
- if (w83781d_read_value(client, W83781D_REG_CONFIG) & 0x80) {
+ if (w83781d_read_value(data, W83781D_REG_CONFIG) & 0x80) {
dev_dbg(&adapter->dev, "Detection of w83781d chip "
"failed at step 3\n");
err = -ENODEV;
goto ERROR2;
}
- val1 = w83781d_read_value(client, W83781D_REG_BANK);
- val2 = w83781d_read_value(client, W83781D_REG_CHIPMAN);
+ val1 = w83781d_read_value(data, W83781D_REG_BANK);
+ val2 = w83781d_read_value(data, W83781D_REG_CHIPMAN);
/* Check for Winbond or Asus ID if in bank 0 */
if ((!(val1 & 0x07)) &&
(((!(val1 & 0x80)) && (val2 != 0xa3) && (val2 != 0xc3))
}
/* If Winbond SMBus, check address at 0x48.
Asus doesn't support, except for as99127f rev.2 */
- if ((!is_isa) && (((!(val1 & 0x80)) && (val2 == 0xa3)) ||
- ((val1 & 0x80) && (val2 == 0x5c)))) {
+ if ((!(val1 & 0x80) && (val2 == 0xa3)) ||
+ ((val1 & 0x80) && (val2 == 0x5c))) {
if (w83781d_read_value
- (client, W83781D_REG_I2C_ADDR) != address) {
+ (data, W83781D_REG_I2C_ADDR) != address) {
dev_dbg(&adapter->dev, "Detection of w83781d "
"chip failed at step 5\n");
err = -ENODEV;
/* We have either had a force parameter, or we have already detected the
Winbond. Put it now into bank 0 and Vendor ID High Byte */
- w83781d_write_value(client, W83781D_REG_BANK,
- (w83781d_read_value(client, W83781D_REG_BANK)
+ w83781d_write_value(data, W83781D_REG_BANK,
+ (w83781d_read_value(data, W83781D_REG_BANK)
& 0x78) | 0x80);
/* Determine the chip type. */
if (kind <= 0) {
/* get vendor ID */
- val2 = w83781d_read_value(client, W83781D_REG_CHIPMAN);
+ val2 = w83781d_read_value(data, W83781D_REG_CHIPMAN);
if (val2 == 0x5c)
vendid = winbond;
else if (val2 == 0x12)
goto ERROR2;
}
- val1 = w83781d_read_value(client, W83781D_REG_WCHIPID);
+ val1 = w83781d_read_value(data, W83781D_REG_WCHIPID);
if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond)
kind = w83781d;
else if (val1 == 0x30 && vendid == winbond)
kind = w83782d;
- else if (val1 == 0x40 && vendid == winbond && !is_isa
- && address == 0x2d)
+ else if (val1 == 0x40 && vendid == winbond && address == 0x2d)
kind = w83783s;
else if (val1 == 0x21 && vendid == winbond)
kind = w83627hf;
- else if (val1 == 0x31 && !is_isa && address >= 0x28)
+ else if (val1 == 0x31 && address >= 0x28)
kind = as99127f;
else {
if (kind == 0)
strlcpy(client->name, client_name, I2C_NAME_SIZE);
data->type = kind;
- data->valid = 0;
- mutex_init(&data->update_lock);
-
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(client)))
goto ERROR2;
/* attach secondary i2c lm75-like clients */
- if (!is_isa) {
- if ((err = w83781d_detect_subclients(adapter, address,
- kind, client)))
- goto ERROR3;
- } else {
- data->lm75[0] = NULL;
- data->lm75[1] = NULL;
- }
+ if ((err = w83781d_detect_subclients(adapter, address,
+ kind, client)))
+ goto ERROR3;
/* Initialize the chip */
- w83781d_init_client(client);
-
- /* A few vars need to be filled upon startup */
- for (i = 1; i <= 3; i++) {
- data->fan_min[i - 1] = w83781d_read_value(client,
- W83781D_REG_FAN_MIN(i));
- }
- if (kind != w83781d && kind != as99127f)
- for (i = 0; i < 4; i++)
- data->pwmenable[i] = 1;
+ w83781d_init_device(dev);
/* Register sysfs hooks */
- if ((err = sysfs_create_group(&dev->kobj, &w83781d_group)))
+ err = w83781d_create_files(dev, kind, 0);
+ if (err)
goto ERROR4;
- if (kind != w83783s) {
- if ((err = device_create_file(dev, &dev_attr_in1_input))
- || (err = device_create_file(dev, &dev_attr_in1_min))
- || (err = device_create_file(dev, &dev_attr_in1_max)))
- goto ERROR4;
- }
- if (kind != as99127f && kind != w83781d && kind != w83783s) {
- if ((err = device_create_file(dev, &dev_attr_in7_input))
- || (err = device_create_file(dev, &dev_attr_in7_min))
- || (err = device_create_file(dev, &dev_attr_in7_max))
- || (err = device_create_file(dev, &dev_attr_in8_input))
- || (err = device_create_file(dev, &dev_attr_in8_min))
- || (err = device_create_file(dev, &dev_attr_in8_max)))
- goto ERROR4;
- }
- if (kind != w83783s) {
- if ((err = device_create_file(dev, &dev_attr_temp3_input))
- || (err = device_create_file(dev, &dev_attr_temp3_max))
- || (err = device_create_file(dev,
- &dev_attr_temp3_max_hyst)))
- goto ERROR4;
- }
-
- if (kind != w83781d && kind != as99127f) {
- if ((err = device_create_file(dev, &dev_attr_pwm1))
- || (err = device_create_file(dev, &dev_attr_pwm2))
- || (err = device_create_file(dev, &dev_attr_pwm2_enable)))
- goto ERROR4;
- }
- if (kind == w83782d && !is_isa) {
- if ((err = device_create_file(dev, &dev_attr_pwm3))
- || (err = device_create_file(dev, &dev_attr_pwm4)))
- goto ERROR4;
- }
-
- if (kind != as99127f && kind != w83781d) {
- if ((err = device_create_file(dev, &dev_attr_temp1_type))
- || (err = device_create_file(dev,
- &dev_attr_temp2_type)))
- goto ERROR4;
- if (kind != w83783s) {
- if ((err = device_create_file(dev,
- &dev_attr_temp3_type)))
- goto ERROR4;
- }
- }
-
data->class_dev = hwmon_device_register(dev);
if (IS_ERR(data->class_dev)) {
err = PTR_ERR(data->class_dev);
ERROR2:
kfree(data);
ERROR1:
- if (is_isa)
- release_region(address, W83781D_EXTENT);
-ERROR0:
return err;
}
sysfs_remove_group(&client->dev.kobj, &w83781d_group);
sysfs_remove_group(&client->dev.kobj, &w83781d_group_opt);
}
- if (i2c_is_isa_client(client))
- release_region(client->addr, W83781D_EXTENT);
if ((err = i2c_detach_client(client)))
return err;
return 0;
}
+static int __devinit
+w83781d_isa_probe(struct platform_device *pdev)
+{
+ int err, reg;
+ struct w83781d_data *data;
+ struct resource *res;
+ const char *name;
+
+ /* Reserve the ISA region */
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (!request_region(res->start, W83781D_EXTENT, "w83781d")) {
+ err = -EBUSY;
+ goto exit;
+ }
+
+ if (!(data = kzalloc(sizeof(struct w83781d_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto exit_release_region;
+ }
+ mutex_init(&data->lock);
+ data->client.addr = res->start;
+ i2c_set_clientdata(&data->client, data);
+ platform_set_drvdata(pdev, data);
+
+ reg = w83781d_read_value(data, W83781D_REG_WCHIPID);
+ switch (reg) {
+ case 0x21:
+ data->type = w83627hf;
+ name = "w83627hf";
+ break;
+ case 0x30:
+ data->type = w83782d;
+ name = "w83782d";
+ break;
+ default:
+ data->type = w83781d;
+ name = "w83781d";
+ }
+ strlcpy(data->client.name, name, I2C_NAME_SIZE);
+
+ /* Initialize the W83781D chip */
+ w83781d_init_device(&pdev->dev);
+
+ /* Register sysfs hooks */
+ err = w83781d_create_files(&pdev->dev, data->type, 1);
+ if (err)
+ goto exit_remove_files;
+
+ data->class_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto exit_remove_files;
+ }
+
+ return 0;
+
+ exit_remove_files:
+ sysfs_remove_group(&pdev->dev.kobj, &w83781d_group);
+ sysfs_remove_group(&pdev->dev.kobj, &w83781d_group_opt);
+ device_remove_file(&pdev->dev, &dev_attr_name);
+ kfree(data);
+ exit_release_region:
+ release_region(res->start, W83781D_EXTENT);
+ exit:
+ return err;
+}
+
+static int __devexit
+w83781d_isa_remove(struct platform_device *pdev)
+{
+ struct w83781d_data *data = platform_get_drvdata(pdev);
+
+ hwmon_device_unregister(data->class_dev);
+ sysfs_remove_group(&pdev->dev.kobj, &w83781d_group);
+ sysfs_remove_group(&pdev->dev.kobj, &w83781d_group_opt);
+ device_remove_file(&pdev->dev, &dev_attr_name);
+ release_region(data->client.addr, W83781D_EXTENT);
+ kfree(data);
+
+ return 0;
+}
+
/* The SMBus locks itself, usually, but nothing may access the Winbond between
bank switches. ISA access must always be locked explicitly!
We ignore the W83781D BUSY flag at this moment - it could lead to deadlocks,
There are some ugly typecasts here, but the good news is - they should
nowhere else be necessary! */
static int
-w83781d_read_value(struct i2c_client *client, u16 reg)
+w83781d_read_value(struct w83781d_data *data, u16 reg)
{
- struct w83781d_data *data = i2c_get_clientdata(client);
+ struct i2c_client *client = &data->client;
int res, word_sized, bank;
struct i2c_client *cl;
mutex_lock(&data->lock);
- if (i2c_is_isa_client(client)) {
+ if (!client->driver) { /* ISA device */
word_sized = (((reg & 0xff00) == 0x100)
|| ((reg & 0xff00) == 0x200))
&& (((reg & 0x00ff) == 0x50)
}
static int
-w83781d_write_value(struct i2c_client *client, u16 reg, u16 value)
+w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value)
{
- struct w83781d_data *data = i2c_get_clientdata(client);
+ struct i2c_client *client = &data->client;
int word_sized, bank;
struct i2c_client *cl;
mutex_lock(&data->lock);
- if (i2c_is_isa_client(client)) {
+ if (!client->driver) { /* ISA device */
word_sized = (((reg & 0xff00) == 0x100)
|| ((reg & 0xff00) == 0x200))
&& (((reg & 0x00ff) == 0x53)
}
static void
-w83781d_init_client(struct i2c_client *client)
+w83781d_init_device(struct device *dev)
{
- struct w83781d_data *data = i2c_get_clientdata(client);
+ struct w83781d_data *data = dev_get_drvdata(dev);
int i, p;
int type = data->type;
u8 tmp;
+ if (type == w83627hf)
+ dev_info(dev, "The W83627HF chip is better supported by the "
+ "w83627hf driver, support will be dropped from the "
+ "w83781d driver soon\n");
+
if (reset && type != as99127f) { /* this resets registers we don't have
documentation for on the as99127f */
/* Resetting the chip has been the default for a long time,
It might even go away if nobody reports it as being useful,
as I see very little reason why this would be needed at
all. */
- dev_info(&client->dev, "If reset=1 solved a problem you were "
+ dev_info(dev, "If reset=1 solved a problem you were "
"having, please report!\n");
/* save these registers */
- i = w83781d_read_value(client, W83781D_REG_BEEP_CONFIG);
- p = w83781d_read_value(client, W83781D_REG_PWMCLK12);
+ i = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG);
+ p = w83781d_read_value(data, W83781D_REG_PWMCLK12);
/* Reset all except Watchdog values and last conversion values
This sets fan-divs to 2, among others */
- w83781d_write_value(client, W83781D_REG_CONFIG, 0x80);
+ w83781d_write_value(data, W83781D_REG_CONFIG, 0x80);
/* Restore the registers and disable power-on abnormal beep.
This saves FAN 1/2/3 input/output values set by BIOS. */
- w83781d_write_value(client, W83781D_REG_BEEP_CONFIG, i | 0x80);
- w83781d_write_value(client, W83781D_REG_PWMCLK12, p);
+ w83781d_write_value(data, W83781D_REG_BEEP_CONFIG, i | 0x80);
+ w83781d_write_value(data, W83781D_REG_PWMCLK12, p);
/* Disable master beep-enable (reset turns it on).
Individual beep_mask should be reset to off but for some reason
disabling this bit helps some people not get beeped */
- w83781d_write_value(client, W83781D_REG_BEEP_INTS2, 0);
+ w83781d_write_value(data, W83781D_REG_BEEP_INTS2, 0);
}
/* Disable power-on abnormal beep, as advised by the datasheet.
Already done if reset=1. */
if (init && !reset && type != as99127f) {
- i = w83781d_read_value(client, W83781D_REG_BEEP_CONFIG);
- w83781d_write_value(client, W83781D_REG_BEEP_CONFIG, i | 0x80);
+ i = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG);
+ w83781d_write_value(data, W83781D_REG_BEEP_CONFIG, i | 0x80);
}
data->vrm = vid_which_vrm();
if ((type != w83781d) && (type != as99127f)) {
- tmp = w83781d_read_value(client, W83781D_REG_SCFG1);
+ tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
for (i = 1; i <= 3; i++) {
if (!(tmp & BIT_SCFG1[i - 1])) {
data->sens[i - 1] = W83781D_DEFAULT_BETA;
} else {
if (w83781d_read_value
- (client,
+ (data,
W83781D_REG_SCFG2) & BIT_SCFG2[i - 1])
data->sens[i - 1] = 1;
else
if (init && type != as99127f) {
/* Enable temp2 */
- tmp = w83781d_read_value(client, W83781D_REG_TEMP2_CONFIG);
+ tmp = w83781d_read_value(data, W83781D_REG_TEMP2_CONFIG);
if (tmp & 0x01) {
- dev_warn(&client->dev, "Enabling temp2, readings "
+ dev_warn(dev, "Enabling temp2, readings "
"might not make sense\n");
- w83781d_write_value(client, W83781D_REG_TEMP2_CONFIG,
+ w83781d_write_value(data, W83781D_REG_TEMP2_CONFIG,
tmp & 0xfe);
}
/* Enable temp3 */
if (type != w83783s) {
- tmp = w83781d_read_value(client,
+ tmp = w83781d_read_value(data,
W83781D_REG_TEMP3_CONFIG);
if (tmp & 0x01) {
- dev_warn(&client->dev, "Enabling temp3, "
+ dev_warn(dev, "Enabling temp3, "
"readings might not make sense\n");
- w83781d_write_value(client,
+ w83781d_write_value(data,
W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
}
}
}
/* Start monitoring */
- w83781d_write_value(client, W83781D_REG_CONFIG,
- (w83781d_read_value(client,
+ w83781d_write_value(data, W83781D_REG_CONFIG,
+ (w83781d_read_value(data,
W83781D_REG_CONFIG) & 0xf7)
| 0x01);
+
+ /* A few vars need to be filled upon startup */
+ for (i = 0; i < 3; i++) {
+ data->fan_min[i] = w83781d_read_value(data,
+ W83781D_REG_FAN_MIN(i));
+ }
+
+ mutex_init(&data->update_lock);
}
static struct w83781d_data *w83781d_update_device(struct device *dev)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct w83781d_data *data = i2c_get_clientdata(client);
+ struct w83781d_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = &data->client;
int i;
mutex_lock(&data->update_lock);
if (data->type == w83783s && i == 1)
continue; /* 783S has no in1 */
data->in[i] =
- w83781d_read_value(client, W83781D_REG_IN(i));
+ w83781d_read_value(data, W83781D_REG_IN(i));
data->in_min[i] =
- w83781d_read_value(client, W83781D_REG_IN_MIN(i));
+ w83781d_read_value(data, W83781D_REG_IN_MIN(i));
data->in_max[i] =
- w83781d_read_value(client, W83781D_REG_IN_MAX(i));
+ w83781d_read_value(data, W83781D_REG_IN_MAX(i));
if ((data->type != w83782d)
&& (data->type != w83627hf) && (i == 6))
break;
}
- for (i = 1; i <= 3; i++) {
- data->fan[i - 1] =
- w83781d_read_value(client, W83781D_REG_FAN(i));
- data->fan_min[i - 1] =
- w83781d_read_value(client, W83781D_REG_FAN_MIN(i));
+ for (i = 0; i < 3; i++) {
+ data->fan[i] =
+ w83781d_read_value(data, W83781D_REG_FAN(i));
+ data->fan_min[i] =
+ w83781d_read_value(data, W83781D_REG_FAN_MIN(i));
}
if (data->type != w83781d && data->type != as99127f) {
- for (i = 1; i <= 4; i++) {
- data->pwm[i - 1] =
- w83781d_read_value(client,
- W83781D_REG_PWM(i));
- if ((data->type != w83782d
- || i2c_is_isa_client(client))
- && i == 2)
+ for (i = 0; i < 4; i++) {
+ data->pwm[i] =
+ w83781d_read_value(data,
+ W83781D_REG_PWM[i]);
+ if ((data->type != w83782d || !client->driver)
+ && i == 1)
break;
}
/* Only PWM2 can be disabled */
- data->pwmenable[1] = (w83781d_read_value(client,
+ data->pwm2_enable = (w83781d_read_value(data,
W83781D_REG_PWMCLK12) & 0x08) >> 3;
}
- data->temp = w83781d_read_value(client, W83781D_REG_TEMP(1));
+ data->temp = w83781d_read_value(data, W83781D_REG_TEMP(1));
data->temp_max =
- w83781d_read_value(client, W83781D_REG_TEMP_OVER(1));
+ w83781d_read_value(data, W83781D_REG_TEMP_OVER(1));
data->temp_max_hyst =
- w83781d_read_value(client, W83781D_REG_TEMP_HYST(1));
+ w83781d_read_value(data, W83781D_REG_TEMP_HYST(1));
data->temp_add[0] =
- w83781d_read_value(client, W83781D_REG_TEMP(2));
+ w83781d_read_value(data, W83781D_REG_TEMP(2));
data->temp_max_add[0] =
- w83781d_read_value(client, W83781D_REG_TEMP_OVER(2));
+ w83781d_read_value(data, W83781D_REG_TEMP_OVER(2));
data->temp_max_hyst_add[0] =
- w83781d_read_value(client, W83781D_REG_TEMP_HYST(2));
+ w83781d_read_value(data, W83781D_REG_TEMP_HYST(2));
if (data->type != w83783s) {
data->temp_add[1] =
- w83781d_read_value(client, W83781D_REG_TEMP(3));
+ w83781d_read_value(data, W83781D_REG_TEMP(3));
data->temp_max_add[1] =
- w83781d_read_value(client,
+ w83781d_read_value(data,
W83781D_REG_TEMP_OVER(3));
data->temp_max_hyst_add[1] =
- w83781d_read_value(client,
+ w83781d_read_value(data,
W83781D_REG_TEMP_HYST(3));
}
- i = w83781d_read_value(client, W83781D_REG_VID_FANDIV);
+ i = w83781d_read_value(data, W83781D_REG_VID_FANDIV);
data->vid = i & 0x0f;
- data->vid |= (w83781d_read_value(client,
+ data->vid |= (w83781d_read_value(data,
W83781D_REG_CHIPID) & 0x01) << 4;
data->fan_div[0] = (i >> 4) & 0x03;
data->fan_div[1] = (i >> 6) & 0x03;
- data->fan_div[2] = (w83781d_read_value(client,
+ data->fan_div[2] = (w83781d_read_value(data,
W83781D_REG_PIN) >> 6) & 0x03;
if ((data->type != w83781d) && (data->type != as99127f)) {
- i = w83781d_read_value(client, W83781D_REG_VBAT);
+ i = w83781d_read_value(data, W83781D_REG_VBAT);
data->fan_div[0] |= (i >> 3) & 0x04;
data->fan_div[1] |= (i >> 4) & 0x04;
data->fan_div[2] |= (i >> 5) & 0x04;
}
if ((data->type == w83782d) || (data->type == w83627hf)) {
- data->alarms = w83781d_read_value(client,
+ data->alarms = w83781d_read_value(data,
W83782D_REG_ALARM1)
- | (w83781d_read_value(client,
+ | (w83781d_read_value(data,
W83782D_REG_ALARM2) << 8)
- | (w83781d_read_value(client,
+ | (w83781d_read_value(data,
W83782D_REG_ALARM3) << 16);
} else if (data->type == w83783s) {
- data->alarms = w83781d_read_value(client,
+ data->alarms = w83781d_read_value(data,
W83782D_REG_ALARM1)
- | (w83781d_read_value(client,
+ | (w83781d_read_value(data,
W83782D_REG_ALARM2) << 8);
} else {
/* No real-time status registers, fall back to
interrupt status registers */
- data->alarms = w83781d_read_value(client,
+ data->alarms = w83781d_read_value(data,
W83781D_REG_ALARM1)
- | (w83781d_read_value(client,
+ | (w83781d_read_value(data,
W83781D_REG_ALARM2) << 8);
}
- i = w83781d_read_value(client, W83781D_REG_BEEP_INTS2);
+ i = w83781d_read_value(data, W83781D_REG_BEEP_INTS2);
data->beep_enable = i >> 7;
data->beep_mask = ((i & 0x7f) << 8) +
- w83781d_read_value(client, W83781D_REG_BEEP_INTS1);
+ w83781d_read_value(data, W83781D_REG_BEEP_INTS1);
if ((data->type != w83781d) && (data->type != as99127f)) {
data->beep_mask |=
- w83781d_read_value(client,
+ w83781d_read_value(data,
W83781D_REG_BEEP_INTS3) << 16;
}
data->last_updated = jiffies;
return data;
}
+/* return 1 if a supported chip is found, 0 otherwise */
+static int __init
+w83781d_isa_found(unsigned short address)
+{
+ int val, save, found = 0;
+
+ if (!request_region(address, W83781D_EXTENT, "w83781d"))
+ return 0;
+
+#define REALLY_SLOW_IO
+ /* We need the timeouts for at least some W83781D-like
+ chips. But only if we read 'undefined' registers. */
+ val = inb_p(address + 1);
+ if (inb_p(address + 2) != val
+ || inb_p(address + 3) != val
+ || inb_p(address + 7) != val) {
+ pr_debug("w83781d: Detection failed at step 1\n");
+ goto release;
+ }
+#undef REALLY_SLOW_IO
+
+ /* We should be able to change the 7 LSB of the address port. The
+ MSB (busy flag) should be clear initially, set after the write. */
+ save = inb_p(address + W83781D_ADDR_REG_OFFSET);
+ if (save & 0x80) {
+ pr_debug("w83781d: Detection failed at step 2\n");
+ goto release;
+ }
+ val = ~save & 0x7f;
+ outb_p(val, address + W83781D_ADDR_REG_OFFSET);
+ if (inb_p(address + W83781D_ADDR_REG_OFFSET) != (val | 0x80)) {
+ outb_p(save, address + W83781D_ADDR_REG_OFFSET);
+ pr_debug("w83781d: Detection failed at step 3\n");
+ goto release;
+ }
+
+ /* We found a device, now see if it could be a W83781D */
+ outb_p(W83781D_REG_CONFIG, address + W83781D_ADDR_REG_OFFSET);
+ val = inb_p(address + W83781D_DATA_REG_OFFSET);
+ if (val & 0x80) {
+ pr_debug("w83781d: Detection failed at step 4\n");
+ goto release;
+ }
+ outb_p(W83781D_REG_BANK, address + W83781D_ADDR_REG_OFFSET);
+ save = inb_p(address + W83781D_DATA_REG_OFFSET);
+ outb_p(W83781D_REG_CHIPMAN, address + W83781D_ADDR_REG_OFFSET);
+ val = inb_p(address + W83781D_DATA_REG_OFFSET);
+ if ((!(save & 0x80) && (val != 0xa3))
+ || ((save & 0x80) && (val != 0x5c))) {
+ pr_debug("w83781d: Detection failed at step 5\n");
+ goto release;
+ }
+ outb_p(W83781D_REG_I2C_ADDR, address + W83781D_ADDR_REG_OFFSET);
+ val = inb_p(address + W83781D_DATA_REG_OFFSET);
+ if (val < 0x03 || val > 0x77) { /* Not a valid I2C address */
+ pr_debug("w83781d: Detection failed at step 6\n");
+ goto release;
+ }
+
+ /* The busy flag should be clear again */
+ if (inb_p(address + W83781D_ADDR_REG_OFFSET) & 0x80) {
+ pr_debug("w83781d: Detection failed at step 7\n");
+ goto release;
+ }
+
+ /* Determine the chip type */
+ outb_p(W83781D_REG_BANK, address + W83781D_ADDR_REG_OFFSET);
+ save = inb_p(address + W83781D_DATA_REG_OFFSET);
+ outb_p(save & 0xf8, address + W83781D_DATA_REG_OFFSET);
+ outb_p(W83781D_REG_WCHIPID, address + W83781D_ADDR_REG_OFFSET);
+ val = inb_p(address + W83781D_DATA_REG_OFFSET);
+ if ((val & 0xfe) == 0x10 /* W83781D */
+ || val == 0x30 /* W83782D */
+ || val == 0x21) /* W83627HF */
+ found = 1;
+
+ if (found)
+ pr_info("w83781d: Found a %s chip at %#x\n",
+ val == 0x21 ? "W83627HF" :
+ val == 0x30 ? "W83782D" : "W83781D", (int)address);
+
+ release:
+ release_region(address, W83781D_EXTENT);
+ return found;
+}
+
+static int __init
+w83781d_isa_device_add(unsigned short address)
+{
+ struct resource res = {
+ .start = address,
+ .end = address + W83781D_EXTENT,
+ .name = "w83781d",
+ .flags = IORESOURCE_IO,
+ };
+ int err;
+
+ pdev = platform_device_alloc("w83781d", address);
+ if (!pdev) {
+ err = -ENOMEM;
+ printk(KERN_ERR "w83781d: Device allocation failed\n");
+ goto exit;
+ }
+
+ err = platform_device_add_resources(pdev, &res, 1);
+ if (err) {
+ printk(KERN_ERR "w83781d: Device resource addition failed "
+ "(%d)\n", err);
+ goto exit_device_put;
+ }
+
+ err = platform_device_add(pdev);
+ if (err) {
+ printk(KERN_ERR "w83781d: Device addition failed (%d)\n",
+ err);
+ goto exit_device_put;
+ }
+
+ return 0;
+
+ exit_device_put:
+ platform_device_put(pdev);
+ exit:
+ pdev = NULL;
+ return err;
+}
+
static int __init
sensors_w83781d_init(void)
{
res = i2c_add_driver(&w83781d_driver);
if (res)
- return res;
+ goto exit;
+
+ if (w83781d_isa_found(isa_address)) {
+ res = platform_driver_register(&w83781d_isa_driver);
+ if (res)
+ goto exit_unreg_i2c_driver;
- /* Don't exit if this one fails, we still want the I2C variants
- to work! */
- if (i2c_isa_add_driver(&w83781d_isa_driver))
- isa_address = 0;
+ /* Sets global pdev as a side effect */
+ res = w83781d_isa_device_add(isa_address);
+ if (res)
+ goto exit_unreg_isa_driver;
+ }
return 0;
+
+ exit_unreg_isa_driver:
+ platform_driver_unregister(&w83781d_isa_driver);
+ exit_unreg_i2c_driver:
+ i2c_del_driver(&w83781d_driver);
+ exit:
+ return res;
}
static void __exit
sensors_w83781d_exit(void)
{
- if (isa_address)
- i2c_isa_del_driver(&w83781d_isa_driver);
+ if (pdev) {
+ platform_device_unregister(pdev);
+ platform_driver_unregister(&w83781d_isa_driver);
+ }
i2c_del_driver(&w83781d_driver);
}
git.samba.org / sfrench / cifs-2.6.git / blobdiff