hwmon: add support for JEDEC JC 42.4 compliant temperature sensors

[sfrench/cifs-2.6.git] / drivers / hwmon / Kconfig

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index e19cf8eb6ccfa10f2ed1414387922d16eebb24ac..b0de75cf74dcb4614b91a721c2b37219b2e6eefb 100644 (file)
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -407,6 +407,13 @@ config SENSORS_CORETEMP
          sensor inside your CPU. Most of the family 6 CPUs
          are supported. Check documentation/driver for details.
 
+config SENSORS_PKGTEMP
+       tristate "Intel processor package temperature sensor"
+       depends on X86 && PCI && EXPERIMENTAL
+       help
+         If you say yes here you get support for the package level temperature
+         sensor inside your CPU. Check documentation/driver for details.
+
 config SENSORS_IBMAEM
        tristate "IBM Active Energy Manager temperature/power sensors and control"
        select IPMI_SI
@@ -446,6 +453,27 @@ config SENSORS_IT87
          This driver can also be built as a module.  If so, the module
          will be called it87.
 
+config SENSORS_JZ4740
+       tristate "Ingenic JZ4740 SoC ADC driver"
+       depends on MACH_JZ4740 && MFD_JZ4740_ADC
+       help
+         If you say yes here you get support for reading adc values from the ADCIN
+         pin on Ingenic JZ4740 SoC based boards.
+
+         This driver can also be build as a module. If so, the module will be
+         called jz4740-hwmon.
+
+config SENSORS_JC42
+       tristate "JEDEC JC42.4 compliant temperature sensors"
+       help
+         If you say yes here you get support for Jedec JC42.4 compliant
+         temperature sensors. Support will include, but not be limited to,
+         ADT7408, CAT34TS02,, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
+         MCP9843, SE97, SE98, STTS424, TSE2002B3, and TS3000B3.
+
+         This driver can also be built as a module.  If so, the module
+         will be called jc42.
+
 config SENSORS_LM63
        tristate "National Semiconductor LM63 and LM64"
        depends on I2C
@@ -739,6 +767,21 @@ config SENSORS_SIS5595
          This driver can also be built as a module.  If so, the module
          will be called sis5595.
 
+config SENSORS_SMM665
+       tristate "Summit Microelectronics SMM665"
+       depends on I2C && EXPERIMENTAL
+       default n
+       help
+         If you say yes here you get support for the hardware monitoring
+         features of the Summit Microelectronics SMM665/SMM665B Six-Channel
+         Active DC Output Controller / Monitor.
+
+         Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
+         Support for those chips is untested.
+
+         This driver can also be built as a module. If so, the module will
+         be called smm665.
+
 config SENSORS_DME1737
        tristate "SMSC DME1737, SCH311x and compatibles"
        depends on I2C && EXPERIMENTAL