*/
#include <linux/async.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
#include <linux/console.h>
+#include <linux/delay.h>
#include <linux/errno.h>
-#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
#include <linux/mm.h>
-#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/string.h>
#include <linux/sysrq.h>
-#include <linux/delay.h>
-#include <linux/init.h>
+#include <linux/tty.h>
#include <linux/vga_switcheroo.h>
#include <drm/drm_crtc.h>
#include <drm/drm_fb_helper.h>
#include <drm/drm_fourcc.h>
+#include <drm/i915_drm.h>
+#include "i915_drv.h"
#include "intel_drv.h"
+#include "intel_fbdev.h"
#include "intel_frontbuffer.h"
-#include <drm/i915_drm.h>
-#include "i915_drv.h"
static void intel_fbdev_invalidate(struct intel_fbdev *ifbdev)
{
goto out_unpin;
}
- info->par = helper;
-
ifbdev->helper.fb = fb;
- strcpy(info->fix.id, "inteldrmfb");
-
info->fbops = &intelfb_ops;
/* setup aperture base/size for vesafb takeover */
info->screen_base = vaddr;
info->screen_size = vma->node.size;
- /* This driver doesn't need a VT switch to restore the mode on resume */
- info->skip_vt_switch = true;
-
- drm_fb_helper_fill_fix(info, fb->pitches[0], fb->format->depth);
- drm_fb_helper_fill_var(info, &ifbdev->helper, sizes->fb_width, sizes->fb_height);
+ drm_fb_helper_fill_info(info, &ifbdev->helper, sizes);
/* If the object is shmemfs backed, it will have given us zeroed pages.
* If the object is stolen however, it will be full of whatever
return ret;
}
-static struct drm_fb_helper_crtc *
-intel_fb_helper_crtc(struct drm_fb_helper *fb_helper, struct drm_crtc *crtc)
-{
- int i;
-
- for (i = 0; i < fb_helper->crtc_count; i++)
- if (fb_helper->crtc_info[i].mode_set.crtc == crtc)
- return &fb_helper->crtc_info[i];
-
- return NULL;
-}
-
-/*
- * Try to read the BIOS display configuration and use it for the initial
- * fb configuration.
- *
- * The BIOS or boot loader will generally create an initial display
- * configuration for us that includes some set of active pipes and displays.
- * This routine tries to figure out which pipes and connectors are active
- * and stuffs them into the crtcs and modes array given to us by the
- * drm_fb_helper code.
- *
- * The overall sequence is:
- * intel_fbdev_init - from driver load
- * intel_fbdev_init_bios - initialize the intel_fbdev using BIOS data
- * drm_fb_helper_init - build fb helper structs
- * drm_fb_helper_single_add_all_connectors - more fb helper structs
- * intel_fbdev_initial_config - apply the config
- * drm_fb_helper_initial_config - call ->probe then register_framebuffer()
- * drm_setup_crtcs - build crtc config for fbdev
- * intel_fb_initial_config - find active connectors etc
- * drm_fb_helper_single_fb_probe - set up fbdev
- * intelfb_create - re-use or alloc fb, build out fbdev structs
- *
- * Note that we don't make special consideration whether we could actually
- * switch to the selected modes without a full modeset. E.g. when the display
- * is in VGA mode we need to recalculate watermarks and set a new high-res
- * framebuffer anyway.
- */
-static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
- struct drm_fb_helper_crtc **crtcs,
- struct drm_display_mode **modes,
- struct drm_fb_offset *offsets,
- bool *enabled, int width, int height)
-{
- struct drm_i915_private *dev_priv = to_i915(fb_helper->dev);
- unsigned int count = min(fb_helper->connector_count, BITS_PER_LONG);
- unsigned long conn_configured, conn_seq;
- int i, j;
- bool *save_enabled;
- bool fallback = true, ret = true;
- int num_connectors_enabled = 0;
- int num_connectors_detected = 0;
- struct drm_modeset_acquire_ctx ctx;
-
- save_enabled = kcalloc(count, sizeof(bool), GFP_KERNEL);
- if (!save_enabled)
- return false;
-
- drm_modeset_acquire_init(&ctx, 0);
-
- while (drm_modeset_lock_all_ctx(fb_helper->dev, &ctx) != 0)
- drm_modeset_backoff(&ctx);
-
- memcpy(save_enabled, enabled, count);
- conn_seq = GENMASK(count - 1, 0);
- conn_configured = 0;
-retry:
- for (i = 0; i < count; i++) {
- struct drm_fb_helper_connector *fb_conn;
- struct drm_connector *connector;
- struct drm_encoder *encoder;
- struct drm_fb_helper_crtc *new_crtc;
-
- fb_conn = fb_helper->connector_info[i];
- connector = fb_conn->connector;
-
- if (conn_configured & BIT(i))
- continue;
-
- /* First pass, only consider tiled connectors */
- if (conn_seq == GENMASK(count - 1, 0) && !connector->has_tile)
- continue;
-
- if (connector->status == connector_status_connected)
- num_connectors_detected++;
-
- if (!enabled[i]) {
- DRM_DEBUG_KMS("connector %s not enabled, skipping\n",
- connector->name);
- conn_configured |= BIT(i);
- continue;
- }
-
- if (connector->force == DRM_FORCE_OFF) {
- DRM_DEBUG_KMS("connector %s is disabled by user, skipping\n",
- connector->name);
- enabled[i] = false;
- continue;
- }
-
- encoder = connector->state->best_encoder;
- if (!encoder || WARN_ON(!connector->state->crtc)) {
- if (connector->force > DRM_FORCE_OFF)
- goto bail;
-
- DRM_DEBUG_KMS("connector %s has no encoder or crtc, skipping\n",
- connector->name);
- enabled[i] = false;
- conn_configured |= BIT(i);
- continue;
- }
-
- num_connectors_enabled++;
-
- new_crtc = intel_fb_helper_crtc(fb_helper,
- connector->state->crtc);
-
- /*
- * Make sure we're not trying to drive multiple connectors
- * with a single CRTC, since our cloning support may not
- * match the BIOS.
- */
- for (j = 0; j < count; j++) {
- if (crtcs[j] == new_crtc) {
- DRM_DEBUG_KMS("fallback: cloned configuration\n");
- goto bail;
- }
- }
-
- DRM_DEBUG_KMS("looking for cmdline mode on connector %s\n",
- connector->name);
-
- /* go for command line mode first */
- modes[i] = drm_pick_cmdline_mode(fb_conn);
-
- /* try for preferred next */
- if (!modes[i]) {
- DRM_DEBUG_KMS("looking for preferred mode on connector %s %d\n",
- connector->name, connector->has_tile);
- modes[i] = drm_has_preferred_mode(fb_conn, width,
- height);
- }
-
- /* No preferred mode marked by the EDID? Are there any modes? */
- if (!modes[i] && !list_empty(&connector->modes)) {
- DRM_DEBUG_KMS("using first mode listed on connector %s\n",
- connector->name);
- modes[i] = list_first_entry(&connector->modes,
- struct drm_display_mode,
- head);
- }
-
- /* last resort: use current mode */
- if (!modes[i]) {
- /*
- * IMPORTANT: We want to use the adjusted mode (i.e.
- * after the panel fitter upscaling) as the initial
- * config, not the input mode, which is what crtc->mode
- * usually contains. But since our current
- * code puts a mode derived from the post-pfit timings
- * into crtc->mode this works out correctly.
- *
- * This is crtc->mode and not crtc->state->mode for the
- * fastboot check to work correctly. crtc_state->mode has
- * I915_MODE_FLAG_INHERITED, which we clear to force check
- * state.
- */
- DRM_DEBUG_KMS("looking for current mode on connector %s\n",
- connector->name);
- modes[i] = &connector->state->crtc->mode;
- }
- crtcs[i] = new_crtc;
-
- DRM_DEBUG_KMS("connector %s on [CRTC:%d:%s]: %dx%d%s\n",
- connector->name,
- connector->state->crtc->base.id,
- connector->state->crtc->name,
- modes[i]->hdisplay, modes[i]->vdisplay,
- modes[i]->flags & DRM_MODE_FLAG_INTERLACE ? "i" :"");
-
- fallback = false;
- conn_configured |= BIT(i);
- }
-
- if (conn_configured != conn_seq) { /* repeat until no more are found */
- conn_seq = conn_configured;
- goto retry;
- }
-
- /*
- * If the BIOS didn't enable everything it could, fall back to have the
- * same user experiencing of lighting up as much as possible like the
- * fbdev helper library.
- */
- if (num_connectors_enabled != num_connectors_detected &&
- num_connectors_enabled < INTEL_INFO(dev_priv)->num_pipes) {
- DRM_DEBUG_KMS("fallback: Not all outputs enabled\n");
- DRM_DEBUG_KMS("Enabled: %i, detected: %i\n", num_connectors_enabled,
- num_connectors_detected);
- fallback = true;
- }
-
- if (fallback) {
-bail:
- DRM_DEBUG_KMS("Not using firmware configuration\n");
- memcpy(enabled, save_enabled, count);
- ret = false;
- }
-
- drm_modeset_drop_locks(&ctx);
- drm_modeset_acquire_fini(&ctx);
-
- kfree(save_enabled);
- return ret;
-}
-
static const struct drm_fb_helper_funcs intel_fb_helper_funcs = {
- .initial_config = intel_fb_initial_config,
.fb_probe = intelfb_create,
};
git.samba.org / sfrench / cifs-2.6.git / blobdiff