static void dpms_legacy(struct drm_fb_helper *fb_helper, int dpms_mode)
{
struct drm_device *dev = fb_helper->dev;
- struct drm_crtc *crtc;
struct drm_connector *connector;
+ struct drm_mode_set *modeset;
int i, j;
drm_modeset_lock_all(dev);
for (i = 0; i < fb_helper->crtc_count; i++) {
- crtc = fb_helper->crtc_info[i].mode_set.crtc;
+ modeset = &fb_helper->crtc_info[i].mode_set;
- if (!crtc->enabled)
+ if (!modeset->crtc->enabled)
continue;
- /* Walk the connectors & encoders on this fb turning them on/off */
- drm_fb_helper_for_each_connector(fb_helper, j) {
- connector = fb_helper->connector_info[j]->connector;
+ for (j = 0; j < modeset->num_connectors; j++) {
+ connector = modeset->connectors[j];
connector->funcs->dpms(connector, dpms_mode);
drm_object_property_set_value(&connector->base,
dev->mode_config.dpms_property, dpms_mode);
int crtc_count = 0;
int i;
struct drm_fb_helper_surface_size sizes;
- int gamma_size = 0;
int best_depth = 0;
memset(&sizes, 0, sizeof(struct drm_fb_helper_surface_size));
if (preferred_bpp != sizes.surface_bpp)
sizes.surface_depth = sizes.surface_bpp = preferred_bpp;
- /* first up get a count of crtcs now in use and new min/maxes width/heights */
drm_fb_helper_for_each_connector(fb_helper, i) {
struct drm_fb_helper_connector *fb_helper_conn = fb_helper->connector_info[i];
struct drm_cmdline_mode *cmdline_mode;
best_depth = fmt->depth;
}
}
- if (sizes.surface_depth != best_depth) {
+ if (sizes.surface_depth != best_depth && best_depth) {
DRM_INFO("requested bpp %d, scaled depth down to %d",
sizes.surface_bpp, best_depth);
sizes.surface_depth = best_depth;
}
+ /* first up get a count of crtcs now in use and new min/maxes width/heights */
crtc_count = 0;
for (i = 0; i < fb_helper->crtc_count; i++) {
struct drm_display_mode *desired_mode;
x = fb_helper->crtc_info[i].x;
y = fb_helper->crtc_info[i].y;
- if (gamma_size == 0)
- gamma_size = fb_helper->crtc_info[i].mode_set.crtc->gamma_size;
-
sizes.surface_width = max_t(u32, desired_mode->hdisplay + x, sizes.surface_width);
sizes.surface_height = max_t(u32, desired_mode->vdisplay + y, sizes.surface_height);
fb_helper->sw_rotations |= DRM_MODE_ROTATE_0;
}
+static struct drm_fb_helper_crtc *
+drm_fb_helper_crtc(struct drm_fb_helper *fb_helper, struct drm_crtc *crtc)
+{
+ int i;
+
+ for (i = 0; i < fb_helper->crtc_count; i++)
+ if (fb_helper->crtc_info[i].mode_set.crtc == crtc)
+ return &fb_helper->crtc_info[i];
+
+ return NULL;
+}
+
+/* Try to read the BIOS display configuration and use it for the initial config */
+static bool drm_fb_helper_firmware_config(struct drm_fb_helper *fb_helper,
+ struct drm_fb_helper_crtc **crtcs,
+ struct drm_display_mode **modes,
+ struct drm_fb_offset *offsets,
+ bool *enabled, int width, int height)
+{
+ struct drm_device *dev = fb_helper->dev;
+ unsigned int count = min(fb_helper->connector_count, BITS_PER_LONG);
+ unsigned long conn_configured, conn_seq;
+ int i, j;
+ bool *save_enabled;
+ bool fallback = true, ret = true;
+ int num_connectors_enabled = 0;
+ int num_connectors_detected = 0;
+ struct drm_modeset_acquire_ctx ctx;
+
+ save_enabled = kcalloc(count, sizeof(bool), GFP_KERNEL);
+ if (!save_enabled)
+ return false;
+
+ drm_modeset_acquire_init(&ctx, 0);
+
+ while (drm_modeset_lock_all_ctx(dev, &ctx) != 0)
+ drm_modeset_backoff(&ctx);
+
+ memcpy(save_enabled, enabled, count);
+ conn_seq = GENMASK(count - 1, 0);
+ conn_configured = 0;
+retry:
+ for (i = 0; i < count; i++) {
+ struct drm_fb_helper_connector *fb_conn;
+ struct drm_connector *connector;
+ struct drm_encoder *encoder;
+ struct drm_fb_helper_crtc *new_crtc;
+
+ fb_conn = fb_helper->connector_info[i];
+ connector = fb_conn->connector;
+
+ if (conn_configured & BIT(i))
+ continue;
+
+ /* First pass, only consider tiled connectors */
+ if (conn_seq == GENMASK(count - 1, 0) && !connector->has_tile)
+ continue;
+
+ if (connector->status == connector_status_connected)
+ num_connectors_detected++;
+
+ if (!enabled[i]) {
+ DRM_DEBUG_KMS("connector %s not enabled, skipping\n",
+ connector->name);
+ conn_configured |= BIT(i);
+ continue;
+ }
+
+ if (connector->force == DRM_FORCE_OFF) {
+ DRM_DEBUG_KMS("connector %s is disabled by user, skipping\n",
+ connector->name);
+ enabled[i] = false;
+ continue;
+ }
+
+ encoder = connector->state->best_encoder;
+ if (!encoder || WARN_ON(!connector->state->crtc)) {
+ if (connector->force > DRM_FORCE_OFF)
+ goto bail;
+
+ DRM_DEBUG_KMS("connector %s has no encoder or crtc, skipping\n",
+ connector->name);
+ enabled[i] = false;
+ conn_configured |= BIT(i);
+ continue;
+ }
+
+ num_connectors_enabled++;
+
+ new_crtc = drm_fb_helper_crtc(fb_helper, connector->state->crtc);
+
+ /*
+ * Make sure we're not trying to drive multiple connectors
+ * with a single CRTC, since our cloning support may not
+ * match the BIOS.
+ */
+ for (j = 0; j < count; j++) {
+ if (crtcs[j] == new_crtc) {
+ DRM_DEBUG_KMS("fallback: cloned configuration\n");
+ goto bail;
+ }
+ }
+
+ DRM_DEBUG_KMS("looking for cmdline mode on connector %s\n",
+ connector->name);
+
+ /* go for command line mode first */
+ modes[i] = drm_pick_cmdline_mode(fb_conn);
+
+ /* try for preferred next */
+ if (!modes[i]) {
+ DRM_DEBUG_KMS("looking for preferred mode on connector %s %d\n",
+ connector->name, connector->has_tile);
+ modes[i] = drm_has_preferred_mode(fb_conn, width,
+ height);
+ }
+
+ /* No preferred mode marked by the EDID? Are there any modes? */
+ if (!modes[i] && !list_empty(&connector->modes)) {
+ DRM_DEBUG_KMS("using first mode listed on connector %s\n",
+ connector->name);
+ modes[i] = list_first_entry(&connector->modes,
+ struct drm_display_mode,
+ head);
+ }
+
+ /* last resort: use current mode */
+ if (!modes[i]) {
+ /*
+ * IMPORTANT: We want to use the adjusted mode (i.e.
+ * after the panel fitter upscaling) as the initial
+ * config, not the input mode, which is what crtc->mode
+ * usually contains. But since our current
+ * code puts a mode derived from the post-pfit timings
+ * into crtc->mode this works out correctly.
+ *
+ * This is crtc->mode and not crtc->state->mode for the
+ * fastboot check to work correctly.
+ */
+ DRM_DEBUG_KMS("looking for current mode on connector %s\n",
+ connector->name);
+ modes[i] = &connector->state->crtc->mode;
+ }
+ crtcs[i] = new_crtc;
+
+ DRM_DEBUG_KMS("connector %s on [CRTC:%d:%s]: %dx%d%s\n",
+ connector->name,
+ connector->state->crtc->base.id,
+ connector->state->crtc->name,
+ modes[i]->hdisplay, modes[i]->vdisplay,
+ modes[i]->flags & DRM_MODE_FLAG_INTERLACE ? "i" : "");
+
+ fallback = false;
+ conn_configured |= BIT(i);
+ }
+
+ if (conn_configured != conn_seq) { /* repeat until no more are found */
+ conn_seq = conn_configured;
+ goto retry;
+ }
+
+ /*
+ * If the BIOS didn't enable everything it could, fall back to have the
+ * same user experiencing of lighting up as much as possible like the
+ * fbdev helper library.
+ */
+ if (num_connectors_enabled != num_connectors_detected &&
+ num_connectors_enabled < dev->mode_config.num_crtc) {
+ DRM_DEBUG_KMS("fallback: Not all outputs enabled\n");
+ DRM_DEBUG_KMS("Enabled: %i, detected: %i\n", num_connectors_enabled,
+ num_connectors_detected);
+ fallback = true;
+ }
+
+ if (fallback) {
+bail:
+ DRM_DEBUG_KMS("Not using firmware configuration\n");
+ memcpy(enabled, save_enabled, count);
+ ret = false;
+ }
+
+ drm_modeset_drop_locks(&ctx);
+ drm_modeset_acquire_fini(&ctx);
+
+ kfree(save_enabled);
+ return ret;
+}
+
static void drm_setup_crtcs(struct drm_fb_helper *fb_helper,
u32 width, u32 height)
{
DRM_DEBUG_KMS("No connectors reported connected with modes\n");
drm_enable_connectors(fb_helper, enabled);
- if (!(fb_helper->funcs->initial_config &&
- fb_helper->funcs->initial_config(fb_helper, crtcs, modes,
- offsets,
- enabled, width, height))) {
+ if (!drm_fb_helper_firmware_config(fb_helper, crtcs, modes, offsets,
+ enabled, width, height)) {
memset(modes, 0, fb_helper->connector_count*sizeof(modes[0]));
memset(crtcs, 0, fb_helper->connector_count*sizeof(crtcs[0]));
memset(offsets, 0, fb_helper->connector_count*sizeof(offsets[0]));
return ret;
}
- drm_client_add(&fb_helper->client);
-
if (!preferred_bpp)
preferred_bpp = dev->mode_config.preferred_depth;
if (!preferred_bpp)
if (ret)
DRM_DEV_DEBUG(dev->dev, "client hotplug ret=%d\n", ret);
+ drm_client_register(&fb_helper->client);
+
return 0;
}
EXPORT_SYMBOL(drm_fbdev_generic_setup);