INIT_LIST_HEAD(&connector->modes);
mutex_init(&connector->mutex);
connector->edid_blob_ptr = NULL;
+ connector->tile_blob_ptr = NULL;
connector->status = connector_status_unknown;
connector->display_info.panel_orientation =
DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
drm_object_attach_property(&connector->base,
config->non_desktop_property,
0);
+ drm_object_attach_property(&connector->base,
+ config->tile_property,
+ 0);
if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
drm_object_attach_property(&connector->base, config->prop_crtc_id, 0);
};
DRM_ENUM_NAME_FN(drm_get_content_protection_name, drm_cp_enum_list)
+static const struct drm_prop_enum_list hdmi_colorspaces[] = {
+ /* For Default case, driver will set the colorspace */
+ { DRM_MODE_COLORIMETRY_DEFAULT, "Default" },
+ /* Standard Definition Colorimetry based on CEA 861 */
+ { DRM_MODE_COLORIMETRY_SMPTE_170M_YCC, "SMPTE_170M_YCC" },
+ { DRM_MODE_COLORIMETRY_BT709_YCC, "BT709_YCC" },
+ /* Standard Definition Colorimetry based on IEC 61966-2-4 */
+ { DRM_MODE_COLORIMETRY_XVYCC_601, "XVYCC_601" },
+ /* High Definition Colorimetry based on IEC 61966-2-4 */
+ { DRM_MODE_COLORIMETRY_XVYCC_709, "XVYCC_709" },
+ /* Colorimetry based on IEC 61966-2-1/Amendment 1 */
+ { DRM_MODE_COLORIMETRY_SYCC_601, "SYCC_601" },
+ /* Colorimetry based on IEC 61966-2-5 [33] */
+ { DRM_MODE_COLORIMETRY_OPYCC_601, "opYCC_601" },
+ /* Colorimetry based on IEC 61966-2-5 */
+ { DRM_MODE_COLORIMETRY_OPRGB, "opRGB" },
+ /* Colorimetry based on ITU-R BT.2020 */
+ { DRM_MODE_COLORIMETRY_BT2020_CYCC, "BT2020_CYCC" },
+ /* Colorimetry based on ITU-R BT.2020 */
+ { DRM_MODE_COLORIMETRY_BT2020_RGB, "BT2020_RGB" },
+ /* Colorimetry based on ITU-R BT.2020 */
+ { DRM_MODE_COLORIMETRY_BT2020_YCC, "BT2020_YCC" },
+ /* Added as part of Additional Colorimetry Extension in 861.G */
+ { DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65, "DCI-P3_RGB_D65" },
+ { DRM_MODE_COLORIMETRY_DCI_P3_RGB_THEATER, "DCI-P3_RGB_Theater" },
+};
+
/**
* DOC: standard connector properties
*
*
* The driver may place further restrictions within these minimum
* and maximum bounds.
- *
- * The semantics for the vertical blank timestamp differ when
- * variable refresh rate is active. The vertical blank timestamp
- * is defined to be an estimate using the current mode's fixed
- * refresh rate timings. The semantics for the page-flip event
- * timestamp remain the same.
*/
/**
}
EXPORT_SYMBOL(drm_mode_create_aspect_ratio_property);
+/**
+ * DOC: standard connector properties
+ *
+ * Colorspace:
+ * drm_mode_create_colorspace_property - create colorspace property
+ * This property helps select a suitable colorspace based on the sink
+ * capability. Modern sink devices support wider gamut like BT2020.
+ * This helps switch to BT2020 mode if the BT2020 encoded video stream
+ * is being played by the user, same for any other colorspace. Thereby
+ * giving a good visual experience to users.
+ *
+ * The expectation from userspace is that it should parse the EDID
+ * and get supported colorspaces. Use this property and switch to the
+ * one supported. Sink supported colorspaces should be retrieved by
+ * userspace from EDID and driver will not explicitly expose them.
+ *
+ * Basically the expectation from userspace is:
+ * - Set up CRTC DEGAMMA/CTM/GAMMA to convert to some sink
+ * colorspace
+ * - Set this new property to let the sink know what it
+ * converted the CRTC output to.
+ * - This property is just to inform sink what colorspace
+ * source is trying to drive.
+ *
+ * Called by a driver the first time it's needed, must be attached to desired
+ * connectors.
+ */
+int drm_mode_create_colorspace_property(struct drm_connector *connector)
+{
+ struct drm_device *dev = connector->dev;
+ struct drm_property *prop;
+
+ if (connector->connector_type == DRM_MODE_CONNECTOR_HDMIA ||
+ connector->connector_type == DRM_MODE_CONNECTOR_HDMIB) {
+ prop = drm_property_create_enum(dev, DRM_MODE_PROP_ENUM,
+ "Colorspace",
+ hdmi_colorspaces,
+ ARRAY_SIZE(hdmi_colorspaces));
+ if (!prop)
+ return -ENOMEM;
+ } else {
+ DRM_DEBUG_KMS("Colorspace property not supported\n");
+ return 0;
+ }
+
+ connector->colorspace_property = prop;
+
+ return 0;
+}
+EXPORT_SYMBOL(drm_mode_create_colorspace_property);
+
/**
* drm_mode_create_content_type_property - create content type property
* @dev: DRM device
* This looks up the tile information for a connector, and creates a
* property for userspace to parse if it exists. The property is of
* the form of 8 integers using ':' as a separator.
+ * This is used for dual port tiled displays with DisplayPort SST
+ * or DisplayPort MST connectors.
*
* Returns:
* Zero on success, errno on failure.
*
* This function creates a new blob modeset object and assigns its id to the
* connector's edid property.
+ * Since we also parse tile information from EDID's displayID block, we also
+ * set the connector's tile property here. See drm_connector_set_tile_property()
+ * for more details.
*
* Returns:
* Zero on success, negative errno on failure.
edid,
&connector->base,
dev->mode_config.edid_property);
- return ret;
+ if (ret)
+ return ret;
+ return drm_connector_set_tile_property(connector);
}
EXPORT_SYMBOL(drm_connector_update_edid_property);
git.samba.org / sfrench / cifs-2.6.git / blobdiff