{ DRM_MODE_CONNECTOR_DSI, "DSI" },
{ DRM_MODE_CONNECTOR_DPI, "DPI" },
{ DRM_MODE_CONNECTOR_WRITEBACK, "Writeback" },
+ { DRM_MODE_CONNECTOR_SPI, "SPI" },
};
void drm_connector_ida_init(void)
}
DRM_DEBUG_KMS("cmdline mode for connector %s %s %dx%d@%dHz%s%s%s\n",
- connector->name,
- mode->name ? mode->name : "",
+ connector->name, mode->name,
mode->xres, mode->yres,
mode->refresh_specified ? mode->refresh : 60,
mode->rb ? " reduced blanking" : "",
}
EXPORT_SYMBOL(drm_connector_init);
+/**
+ * drm_connector_init_with_ddc - Init a preallocated connector
+ * @dev: DRM device
+ * @connector: the connector to init
+ * @funcs: callbacks for this connector
+ * @connector_type: user visible type of the connector
+ * @ddc: pointer to the associated ddc adapter
+ *
+ * Initialises a preallocated connector. Connectors should be
+ * subclassed as part of driver connector objects.
+ *
+ * Ensures that the ddc field of the connector is correctly set.
+ *
+ * Returns:
+ * Zero on success, error code on failure.
+ */
+int drm_connector_init_with_ddc(struct drm_device *dev,
+ struct drm_connector *connector,
+ const struct drm_connector_funcs *funcs,
+ int connector_type,
+ struct i2c_adapter *ddc)
+{
+ int ret;
+
+ ret = drm_connector_init(dev, connector, funcs, connector_type);
+ if (ret)
+ return ret;
+
+ /* provide ddc symlink in sysfs */
+ connector->ddc = ddc;
+
+ return ret;
+}
+EXPORT_SYMBOL(drm_connector_init_with_ddc);
+
/**
* drm_connector_attach_edid_property - attach edid property.
* @connector: the connector
int drm_connector_attach_encoder(struct drm_connector *connector,
struct drm_encoder *encoder)
{
- int i;
-
/*
* In the past, drivers have attempted to model the static association
* of connector to encoder in simple connector/encoder devices using a
if (WARN_ON(connector->encoder))
return -EINVAL;
- for (i = 0; i < ARRAY_SIZE(connector->encoder_ids); i++) {
- if (connector->encoder_ids[i] == 0) {
- connector->encoder_ids[i] = encoder->base.id;
- return 0;
- }
- }
- return -ENOMEM;
+ connector->possible_encoders |= drm_encoder_mask(encoder);
+
+ return 0;
}
EXPORT_SYMBOL(drm_connector_attach_encoder);
/**
- * drm_connector_has_possible_encoder - check if the connector and encoder are assosicated with each other
+ * drm_connector_has_possible_encoder - check if the connector and encoder are
+ * associated with each other
* @connector: the connector
* @encoder: the encoder
*
bool drm_connector_has_possible_encoder(struct drm_connector *connector,
struct drm_encoder *encoder)
{
- struct drm_encoder *enc;
- int i;
-
- drm_connector_for_each_possible_encoder(connector, enc, i) {
- if (enc == encoder)
- return true;
- }
-
- return false;
+ return connector->possible_encoders & drm_encoder_mask(encoder);
}
EXPORT_SYMBOL(drm_connector_has_possible_encoder);
* drm_connector_register - register a connector
* @connector: the connector to register
*
- * Register userspace interfaces for a connector
+ * Register userspace interfaces for a connector. Only call this for connectors
+ * which can be hotplugged after drm_dev_register() has been called already,
+ * e.g. DP MST connectors. All other connectors will be registered automatically
+ * when calling drm_dev_register().
*
* Returns:
* Zero on success, error code on failure.
* drm_connector_unregister - unregister a connector
* @connector: the connector to unregister
*
- * Unregister userspace interfaces for a connector
+ * Unregister userspace interfaces for a connector. Only call this for
+ * connectors which have registered explicitly by calling drm_dev_register(),
+ * since connectors are unregistered automatically when drm_dev_unregister() is
+ * called.
*/
void drm_connector_unregister(struct drm_connector *connector)
{
* - If the state is DESIRED, kernel should attempt to re-authenticate the
* link whenever possible. This includes across disable/enable, dpms,
* hotplug, downstream device changes, link status failures, etc..
- * - Userspace is responsible for polling the property to determine when
- * the value transitions from ENABLED to DESIRED. This signifies the link
- * is no longer protected and userspace should take appropriate action
- * (whatever that might be).
+ * - Kernel sends uevent with the connector id and property id through
+ * @drm_hdcp_update_content_protection, upon below kernel triggered
+ * scenarios:
+ *
+ * - DESIRED -> ENABLED (authentication success)
+ * - ENABLED -> DESIRED (termination of authentication)
+ * - Please note no uevents for userspace triggered property state changes,
+ * which can't fail such as
+ *
+ * - DESIRED/ENABLED -> UNDESIRED
+ * - UNDESIRED -> DESIRED
+ * - Userspace is responsible for polling the property or listen to uevents
+ * to determine when the value transitions from ENABLED to DESIRED.
+ * This signifies the link is no longer protected and userspace should
+ * take appropriate action (whatever that might be).
+ *
+ * HDCP Content Type:
+ * This Enum property is used by the userspace to declare the content type
+ * of the display stream, to kernel. Here display stream stands for any
+ * display content that userspace intended to display through HDCP
+ * encryption.
+ *
+ * Content Type of a stream is decided by the owner of the stream, as
+ * "HDCP Type0" or "HDCP Type1".
+ *
+ * The value of the property can be one of the below:
+ * - "HDCP Type0": DRM_MODE_HDCP_CONTENT_TYPE0 = 0
+ * - "HDCP Type1": DRM_MODE_HDCP_CONTENT_TYPE1 = 1
+ *
+ * When kernel starts the HDCP authentication (see "Content Protection"
+ * for details), it uses the content type in "HDCP Content Type"
+ * for performing the HDCP authentication with the display sink.
+ *
+ * Please note in HDCP spec versions, a link can be authenticated with
+ * HDCP 2.2 for Content Type 0/Content Type 1. Where as a link can be
+ * authenticated with HDCP1.4 only for Content Type 0(though it is implicit
+ * in nature. As there is no reference for Content Type in HDCP1.4).
+ *
+ * HDCP2.2 authentication protocol itself takes the "Content Type" as a
+ * parameter, which is a input for the DP HDCP2.2 encryption algo.
+ *
+ * In case of Type 0 content protection request, kernel driver can choose
+ * either of HDCP spec versions 1.4 and 2.2. When HDCP2.2 is used for
+ * "HDCP Type 0", a HDCP 2.2 capable repeater in the downstream can send
+ * that content to a HDCP 1.4 authenticated HDCP sink (Type0 link).
+ * But if the content is classified as "HDCP Type 1", above mentioned
+ * HDCP 2.2 repeater wont send the content to the HDCP sink as it can't
+ * authenticate the HDCP1.4 capable sink for "HDCP Type 1".
+ *
+ * Please note userspace can be ignorant of the HDCP versions used by the
+ * kernel driver to achieve the "HDCP Content Type".
+ *
+ * At current scenario, classifying a content as Type 1 ensures that the
+ * content will be displayed only through the HDCP2.2 encrypted link.
+ *
+ * Note that the HDCP Content Type property is introduced at HDCP 2.2, and
+ * defaults to type 0. It is only exposed by drivers supporting HDCP 2.2
+ * (hence supporting Type 0 and Type 1). Based on how next versions of
+ * HDCP specs are defined content Type could be used for higher versions
+ * too.
+ *
+ * If content type is changed when "Content Protection" is not UNDESIRED,
+ * then kernel will disable the HDCP and re-enable with new type in the
+ * same atomic commit. And when "Content Protection" is ENABLED, it means
+ * that link is HDCP authenticated and encrypted, for the transmission of
+ * the Type of stream mentioned at "HDCP Content Type".
*
* HDR_OUTPUT_METADATA:
* Connector property to enable userspace to send HDR Metadata to
int encoders_count = 0;
int ret = 0;
int copied = 0;
- int i;
struct drm_mode_modeinfo u_mode;
struct drm_mode_modeinfo __user *mode_ptr;
uint32_t __user *encoder_ptr;
if (!connector)
return -ENOENT;
- drm_connector_for_each_possible_encoder(connector, encoder, i)
- encoders_count++;
+ encoders_count = hweight32(connector->possible_encoders);
if ((out_resp->count_encoders >= encoders_count) && encoders_count) {
copied = 0;
encoder_ptr = (uint32_t __user *)(unsigned long)(out_resp->encoders_ptr);
- drm_connector_for_each_possible_encoder(connector, encoder, i) {
+ drm_connector_for_each_possible_encoder(connector, encoder) {
if (put_user(encoder->base.id, encoder_ptr + copied)) {
ret = -EFAULT;
goto out;
git.samba.org / sfrench / cifs-2.6.git / blobdiff