#define MC_MAX_DOD 0x64
/*
- * OFFSETS for Device 3 Function 4, as inicated on Xeon 5500 datasheet:
+ * OFFSETS for Device 3 Function 4, as indicated on Xeon 5500 datasheet:
* http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf
*/
#define DIMM1_COR_ERR(r) (((r) >> 16) & 0x7fff)
#define DIMM0_COR_ERR(r) ((r) & 0x7fff)
-/* OFFSETS for Device 3 Function 2, as inicated on Xeon 5500 datasheet */
+/* OFFSETS for Device 3 Function 2, as indicated on Xeon 5500 datasheet */
#define MC_SSRCONTROL 0x48
#define SSR_MODE_DISABLE 0x00
#define SSR_MODE_ENABLE 0x01
};
/****************************************************************************
- Anciliary status routines
+ Ancillary status routines
****************************************************************************/
/* MC_CONTROL bits */
dev_descr->dev_id, *prev);
/*
- * On Xeon 55xx, the Intel Quckpath Arch Generic Non-core regs
+ * On Xeon 55xx, the Intel QuickPath Arch Generic Non-core regs
* is at addr 8086:2c40, instead of 8086:2c41. So, we need
* to probe for the alternate address in case of failure
*/
/*
* get_sdram_scrub_rate This routine convert current scrub rate value
- * into byte/sec bandwidth accourding to
+ * into byte/sec bandwidth according to
* SCRUBINTERVAL formula found in datasheet.
*/
static int get_sdram_scrub_rate(struct mem_ctl_info *mci)