}
}
-#ifdef CONFIG_PM
-/**
- * ata_scsi_device_suspend - suspend ATA device associated with sdev
- * @sdev: the SCSI device to suspend
- * @mesg: target power management message
- *
- * Request suspend EH action on the ATA device associated with
- * @sdev and wait for the operation to complete.
- *
- * LOCKING:
- * Kernel thread context (may sleep).
- *
- * RETURNS:
- * 0 on success, -errno otherwise.
- */
-int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t mesg)
-{
- struct ata_port *ap = ata_shost_to_port(sdev->host);
- struct ata_device *dev = ata_scsi_find_dev(ap, sdev);
- unsigned long flags;
- unsigned int action;
- int rc = 0;
-
- if (!dev)
- goto out;
-
- spin_lock_irqsave(ap->lock, flags);
-
- /* wait for the previous resume to complete */
- while (dev->flags & ATA_DFLAG_SUSPENDED) {
- spin_unlock_irqrestore(ap->lock, flags);
- ata_port_wait_eh(ap);
- spin_lock_irqsave(ap->lock, flags);
- }
-
- /* if @sdev is already detached, nothing to do */
- if (sdev->sdev_state == SDEV_OFFLINE ||
- sdev->sdev_state == SDEV_CANCEL || sdev->sdev_state == SDEV_DEL)
- goto out_unlock;
-
- /* request suspend */
- action = ATA_EH_SUSPEND;
- if (mesg.event != PM_EVENT_SUSPEND)
- action |= ATA_EH_PM_FREEZE;
- ap->eh_info.dev_action[dev->devno] |= action;
- ap->eh_info.flags |= ATA_EHI_QUIET;
- ata_port_schedule_eh(ap);
-
- spin_unlock_irqrestore(ap->lock, flags);
-
- /* wait for EH to do the job */
- ata_port_wait_eh(ap);
-
- spin_lock_irqsave(ap->lock, flags);
-
- /* If @sdev is still attached but the associated ATA device
- * isn't suspended, the operation failed.
- */
- if (sdev->sdev_state != SDEV_OFFLINE &&
- sdev->sdev_state != SDEV_CANCEL && sdev->sdev_state != SDEV_DEL &&
- !(dev->flags & ATA_DFLAG_SUSPENDED))
- rc = -EIO;
-
- out_unlock:
- spin_unlock_irqrestore(ap->lock, flags);
- out:
- if (rc == 0)
- sdev->sdev_gendev.power.power_state = mesg;
- return rc;
-}
-
-/**
- * ata_scsi_device_resume - resume ATA device associated with sdev
- * @sdev: the SCSI device to resume
- *
- * Request resume EH action on the ATA device associated with
- * @sdev and return immediately. This enables parallel
- * wakeup/spinup of devices.
- *
- * LOCKING:
- * Kernel thread context (may sleep).
- *
- * RETURNS:
- * 0.
- */
-int ata_scsi_device_resume(struct scsi_device *sdev)
-{
- struct ata_port *ap = ata_shost_to_port(sdev->host);
- struct ata_device *dev = ata_scsi_find_dev(ap, sdev);
- struct ata_eh_info *ehi = &ap->eh_info;
- unsigned long flags;
- unsigned int action;
-
- if (!dev)
- goto out;
-
- spin_lock_irqsave(ap->lock, flags);
-
- /* if @sdev is already detached, nothing to do */
- if (sdev->sdev_state == SDEV_OFFLINE ||
- sdev->sdev_state == SDEV_CANCEL || sdev->sdev_state == SDEV_DEL)
- goto out_unlock;
-
- /* request resume */
- action = ATA_EH_RESUME;
- if (sdev->sdev_gendev.power.power_state.event == PM_EVENT_SUSPEND)
- __ata_ehi_hotplugged(ehi);
- else
- action |= ATA_EH_PM_FREEZE | ATA_EH_SOFTRESET;
- ehi->dev_action[dev->devno] |= action;
-
- /* We don't want autopsy and verbose EH messages. Disable
- * those if we're the only device on this link.
- */
- if (ata_port_max_devices(ap) == 1)
- ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
-
- ata_port_schedule_eh(ap);
-
- out_unlock:
- spin_unlock_irqrestore(ap->lock, flags);
- out:
- sdev->sdev_gendev.power.power_state = PMSG_ON;
- return 0;
-}
-#endif /* CONFIG_PM */
-
/**
* ata_to_sense_error - convert ATA error to SCSI error
* @id: ATA device number
blk_queue_max_phys_segments(sdev->request_queue, LIBATA_MAX_PRD);
+ sdev->manage_start_stop = 1;
+
if (dev)
ata_scsi_dev_config(sdev, dev);
return queue_depth;
}
+/* XXX: for spindown warning */
+static void ata_delayed_done_timerfn(unsigned long arg)
+{
+ struct scsi_cmnd *scmd = (void *)arg;
+
+ scmd->scsi_done(scmd);
+}
+
+/* XXX: for spindown warning */
+static void ata_delayed_done(struct scsi_cmnd *scmd)
+{
+ static struct timer_list timer;
+
+ setup_timer(&timer, ata_delayed_done_timerfn, (unsigned long)scmd);
+ mod_timer(&timer, jiffies + 5 * HZ);
+}
+
/**
* ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command
* @qc: Storage for translated ATA taskfile
}
tf->command = ATA_CMD_VERIFY; /* READ VERIFY */
- } else
+ } else {
+ /* XXX: This is for backward compatibility, will be
+ * removed. Read Documentation/feature-removal-schedule.txt
+ * for more info.
+ */
+ if ((qc->dev->flags & ATA_DFLAG_SPUNDOWN) &&
+ (system_state == SYSTEM_HALT ||
+ system_state == SYSTEM_POWER_OFF)) {
+ static unsigned long warned = 0;
+
+ if (!test_and_set_bit(0, &warned)) {
+ ata_dev_printk(qc->dev, KERN_WARNING,
+ "DISK MIGHT NOT BE SPUN DOWN PROPERLY. "
+ "UPDATE SHUTDOWN UTILITY\n");
+ ata_dev_printk(qc->dev, KERN_WARNING,
+ "For more info, visit "
+ "http://linux-ata.org/shutdown.html\n");
+
+ /* ->scsi_done is not used, use it for
+ * delayed completion.
+ */
+ scmd->scsi_done = qc->scsidone;
+ qc->scsidone = ata_delayed_done;
+ }
+ scmd->result = SAM_STAT_GOOD;
+ return 1;
+ }
+
/* Issue ATA STANDBY IMMEDIATE command */
tf->command = ATA_CMD_STANDBYNOW1;
+ }
/*
* Standby and Idle condition timers could be implemented but that
static void scsi_6_lba_len(const u8 *cdb, u64 *plba, u32 *plen)
{
u64 lba = 0;
- u32 len = 0;
+ u32 len;
VPRINTK("six-byte command\n");
+ lba |= ((u64)(cdb[1] & 0x1f)) << 16;
lba |= ((u64)cdb[2]) << 8;
lba |= ((u64)cdb[3]);
- len |= ((u32)cdb[4]);
+ len = cdb[4];
*plba = lba;
*plen = len;
* schedule EH_REVALIDATE operation to update the IDENTIFY DEVICE
* cache
*/
- if (ap->ops->error_handler &&
- !need_sense && (qc->tf.command == ATA_CMD_SET_FEATURES) &&
- ((qc->tf.feature == SETFEATURES_WC_ON) ||
- (qc->tf.feature == SETFEATURES_WC_OFF))) {
- ap->eh_info.action |= ATA_EH_REVALIDATE;
- ata_port_schedule_eh(ap);
+ if (ap->ops->error_handler && !need_sense) {
+ switch (qc->tf.command) {
+ case ATA_CMD_SET_FEATURES:
+ if ((qc->tf.feature == SETFEATURES_WC_ON) ||
+ (qc->tf.feature == SETFEATURES_WC_OFF)) {
+ ap->eh_info.action |= ATA_EH_REVALIDATE;
+ ata_port_schedule_eh(ap);
+ }
+ break;
+
+ case ATA_CMD_INIT_DEV_PARAMS: /* CHS translation changed */
+ case ATA_CMD_SET_MULTI: /* multi_count changed */
+ ap->eh_info.action |= ATA_EH_REVALIDATE;
+ ata_port_schedule_eh(ap);
+ break;
+ }
}
/* For ATA pass thru (SAT) commands, generate a sense block if
}
}
+ /* XXX: track spindown state for spindown skipping and warning */
+ if (unlikely(qc->tf.command == ATA_CMD_STANDBY ||
+ qc->tf.command == ATA_CMD_STANDBYNOW1))
+ qc->dev->flags |= ATA_DFLAG_SPUNDOWN;
+ else if (likely(system_state != SYSTEM_HALT &&
+ system_state != SYSTEM_POWER_OFF))
+ qc->dev->flags &= ~ATA_DFLAG_SPUNDOWN;
+
if (need_sense && !ap->ops->error_handler)
ata_dump_status(ap->print_id, &qc->result_tf);
early_finish:
ata_qc_free(qc);
- done(cmd);
+ qc->scsidone(cmd);
DPRINTK("EXIT - early finish (good or error)\n");
return 0;
err_did:
ata_qc_free(qc);
cmd->result = (DID_ERROR << 16);
- done(cmd);
+ qc->scsidone(cmd);
err_mem:
DPRINTK("EXIT - internal\n");
return 0;
int using_pio = (dev->flags & ATA_DFLAG_PIO);
int nodata = (scmd->sc_data_direction == DMA_NONE);
- if (!using_pio)
- /* Check whether ATAPI DMA is safe */
- if (ata_check_atapi_dma(qc))
- using_pio = 1;
-
memset(qc->cdb, 0, dev->cdb_len);
memcpy(qc->cdb, scmd->cmnd, scmd->cmd_len);
}
qc->tf.command = ATA_CMD_PACKET;
+ qc->nbytes = scmd->request_bufflen;
+
+ /* check whether ATAPI DMA is safe */
+ if (!using_pio && ata_check_atapi_dma(qc))
+ using_pio = 1;
- /* no data, or PIO data xfer */
if (using_pio || nodata) {
+ /* no data, or PIO data xfer */
if (nodata)
qc->tf.protocol = ATA_PROT_ATAPI_NODATA;
else
qc->tf.protocol = ATA_PROT_ATAPI;
qc->tf.lbam = (8 * 1024) & 0xff;
qc->tf.lbah = (8 * 1024) >> 8;
- }
-
- /* DMA data xfer */
- else {
+ } else {
+ /* DMA data xfer */
qc->tf.protocol = ATA_PROT_ATAPI_DMA;
qc->tf.feature |= ATAPI_PKT_DMA;
qc->tf.feature |= ATAPI_DMADIR;
}
- qc->nbytes = scmd->request_bufflen;
-
return 0;
}
return ATA_PROT_NODATA;
case 6: /* DMA */
+ case 10: /* UDMA Data-in */
+ case 11: /* UDMA Data-Out */
return ATA_PROT_DMA;
case 4: /* PIO Data-in */
case 5: /* PIO Data-out */
return ATA_PROT_PIO;
- case 10: /* Device Reset */
case 0: /* Hard Reset */
case 1: /* SRST */
- case 2: /* Bus Idle */
- case 7: /* Packet */
- case 8: /* DMA Queued */
- case 9: /* Device Diagnostic */
- case 11: /* UDMA Data-in */
- case 12: /* UDMA Data-Out */
- case 13: /* FPDMA */
+ case 8: /* Device Diagnostic */
+ case 9: /* Device Reset */
+ case 7: /* DMA Queued */
+ case 12: /* FPDMA */
+ case 15: /* Return Response Info */
default: /* Reserved */
break;
}
if (tf->protocol == ATA_PROT_DMA && dev->dma_mode == 0)
goto invalid_fld;
- if (cdb[1] & 0xe0)
- /* PIO multi not supported yet */
- goto invalid_fld;
-
/*
* 12 and 16 byte CDBs use different offsets to
* provide the various register values.
tf->device = cdb[8];
tf->command = cdb[9];
}
- /*
- * If slave is possible, enforce correct master/slave bit
- */
- if (qc->ap->flags & ATA_FLAG_SLAVE_POSS)
- tf->device = qc->dev->devno ?
- tf->device | ATA_DEV1 : tf->device & ~ATA_DEV1;
+
+ /* enforce correct master/slave bit */
+ tf->device = dev->devno ?
+ tf->device | ATA_DEV1 : tf->device & ~ATA_DEV1;
+
+ /* sanity check for pio multi commands */
+ if ((cdb[1] & 0xe0) && !is_multi_taskfile(tf))
+ goto invalid_fld;
+
+ if (is_multi_taskfile(tf)) {
+ unsigned int multi_count = 1 << (cdb[1] >> 5);
+
+ /* compare the passed through multi_count
+ * with the cached multi_count of libata
+ */
+ if (multi_count != dev->multi_count)
+ ata_dev_printk(dev, KERN_WARNING,
+ "invalid multi_count %u ignored\n",
+ multi_count);
+ }
/* READ/WRITE LONG use a non-standard sect_size */
qc->sect_size = ATA_SECT_SIZE;
git.samba.org / sfrench / cifs-2.6.git / blobdiff