*
*/
-
-/* define DEBUG to print some debugging messages. */
-
-#undef DEBUG
-
-#ifdef DEBUG
-# define DBG(x...) printk(x)
-#else
-# define DBG(x...)
-#endif
-
static int pciauto_upper_iospc;
static int pciauto_upper_memspc;
{
bar_size &= PCI_BASE_ADDRESS_IO_MASK;
upper_limit = &pciauto_upper_iospc;
- DBG("PCI Autoconfig: BAR %d, I/O, ", bar_nr);
+ pr_debug("PCI Autoconfig: BAR %d, I/O, ", bar_nr);
}
else
{
bar_size &= PCI_BASE_ADDRESS_MEM_MASK;
upper_limit = &pciauto_upper_memspc;
- DBG("PCI Autoconfig: BAR %d, Mem, ", bar_nr);
+ pr_debug("PCI Autoconfig: BAR %d, Mem, ", bar_nr);
}
/* Allocate a base address (bar_size is negative!) */
if (found_mem64)
pci_write_config_dword(dev, (bar+=4), 0x00000000);
- DBG("size=0x%x, address=0x%x\n", ~bar_size + 1, *upper_limit);
+ pr_debug("size=0x%x, address=0x%x\n",
+ ~bar_size + 1, *upper_limit);
}
}
if (irq == -1)
irq = 0;
- DBG("PCI Autoconfig: Interrupt %d, pin %d\n", irq, pin);
+ pr_debug("PCI Autoconfig: Interrupt %d, pin %d\n", irq, pin);
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
}
int iosave, memsave;
- DBG("PCI Autoconfig: Found P2P bridge, device %d\n",
- PCI_SLOT(pci_devfn));
+ pr_debug("PCI Autoconfig: Found P2P bridge, device %d\n",
+ PCI_SLOT(pci_devfn));
/* Allocate PCI I/O and/or memory space */
pciauto_setup_bars(dev, PCI_BASE_ADDRESS_1);
}
-
-#if 0
- /* Skip legacy mode IDE controller */
-
- if ((pci_class >> 16) == PCI_CLASS_STORAGE_IDE) {
-
- unsigned char prg_iface;
- pci_read_config_byte(dev, PCI_CLASS_PROG, &prg_iface);
-
- if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) {
- DBG("PCI Autoconfig: Skipping legacy mode "
- "IDE controller\n");
- continue;
- }
- }
-#endif
-
/*
* Found a peripheral, enable some standard
* settings
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x80);
/* Allocate PCI I/O and/or memory space */
- DBG("PCI Autoconfig: Found Bus %d, Device %d, Function %d\n",
- current_bus, PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn) );
+ pr_debug("PCI Autoconfig: Found Bus %d, Device %d, Function %d\n",
+ current_bus, PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn));
pciauto_setup_bars(dev, PCI_BASE_ADDRESS_5);
pciauto_setup_irq(pci_ctrl, dev, pci_devfn);