/*
* mmconfig.c - Low-level direct PCI config space access via MMCONFIG
- *
+ *
* This is an 64bit optimized version that always keeps the full mmconfig
* space mapped. This allows lockless config space operation.
*/
#include "pci.h"
-/* aperture is up to 256MB but BIOS may reserve less */
-#define MMCONFIG_APER_MIN (2 * 1024*1024)
-#define MMCONFIG_APER_MAX (256 * 1024*1024)
-
-/* Verify the first 16 busses. We assume that systems with more busses
- get MCFG right. */
-#define MAX_CHECK_BUS 16
-
-static DECLARE_BITMAP(fallback_slots, 32*MAX_CHECK_BUS);
-
/* Static virtual mapping of the MMCONFIG aperture */
struct mmcfg_virt {
- struct acpi_table_mcfg_config *cfg;
+ struct acpi_mcfg_allocation *cfg;
char __iomem *virt;
};
static struct mmcfg_virt *pci_mmcfg_virt;
static char __iomem *get_virt(unsigned int seg, unsigned bus)
{
- int cfg_num = -1;
- struct acpi_table_mcfg_config *cfg;
+ struct acpi_mcfg_allocation *cfg;
+ int cfg_num;
- while (1) {
- ++cfg_num;
- if (cfg_num >= pci_mmcfg_config_num)
- break;
+ for (cfg_num = 0; cfg_num < pci_mmcfg_config_num; cfg_num++) {
cfg = pci_mmcfg_virt[cfg_num].cfg;
- if (cfg->pci_segment_group_number != seg)
- continue;
- if ((cfg->start_bus_number <= bus) &&
+ if (cfg->pci_segment == seg &&
+ (cfg->start_bus_number <= bus) &&
(cfg->end_bus_number >= bus))
return pci_mmcfg_virt[cfg_num].virt;
}
- /* Handle more broken MCFG tables on Asus etc.
- They only contain a single entry for bus 0-0. Assume
- this applies to all busses. */
- cfg = &pci_mmcfg_config[0];
- if (pci_mmcfg_config_num == 1 &&
- cfg->pci_segment_group_number == 0 &&
- (cfg->start_bus_number | cfg->end_bus_number) == 0)
- return pci_mmcfg_virt[0].virt;
-
/* Fall back to type 0 */
return NULL;
}
static char __iomem *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn)
{
char __iomem *addr;
- if (seg == 0 && bus < MAX_CHECK_BUS &&
- test_bit(32*bus + PCI_SLOT(devfn), fallback_slots))
+ if (seg == 0 && bus < PCI_MMCFG_MAX_CHECK_BUS &&
+ test_bit(32*bus + PCI_SLOT(devfn), pci_mmcfg_fallback_slots))
return NULL;
addr = get_virt(seg, bus);
if (!addr)
.write = pci_mmcfg_write,
};
-/* K8 systems have some devices (typically in the builtin northbridge)
- that are only accessible using type1
- Normally this can be expressed in the MCFG by not listing them
- and assigning suitable _SEGs, but this isn't implemented in some BIOS.
- Instead try to discover all devices on bus 0 that are unreachable using MM
- and fallback for them. */
-static __init void unreachable_devices(void)
+static void __iomem * __init mcfg_ioremap(struct acpi_mcfg_allocation *cfg)
{
- int i, k;
- /* Use the max bus number from ACPI here? */
- for (k = 0; k < MAX_CHECK_BUS; k++) {
- for (i = 0; i < 32; i++) {
- u32 val1;
- char __iomem *addr;
-
- pci_conf1_read(0, k, PCI_DEVFN(i,0), 0, 4, &val1);
- if (val1 == 0xffffffff)
- continue;
- addr = pci_dev_base(0, k, PCI_DEVFN(i, 0));
- if (addr == NULL|| readl(addr) != val1) {
- set_bit(i + 32*k, fallback_slots);
- printk(KERN_NOTICE "PCI: No mmconfig possible"
- " on device %02x:%02x\n", k, i);
- }
- }
+ void __iomem *addr;
+ u32 size;
+
+ size = (cfg->end_bus_number + 1) << 20;
+ addr = ioremap_nocache(cfg->address, size);
+ if (addr) {
+ printk(KERN_INFO "PCI: Using MMCONFIG at %Lx - %Lx\n",
+ cfg->address, cfg->address + size - 1);
}
+ return addr;
}
-static __init void pci_mmcfg_insert_resources(void)
+int __init pci_mmcfg_arch_reachable(unsigned int seg, unsigned int bus,
+ unsigned int devfn)
{
-#define PCI_MMCFG_RESOURCE_NAME_LEN 19
- int i;
- struct resource *res;
- char *names;
- unsigned num_buses;
-
- res = kcalloc(PCI_MMCFG_RESOURCE_NAME_LEN + sizeof(*res),
- pci_mmcfg_config_num, GFP_KERNEL);
-
- if (!res) {
- printk(KERN_ERR "PCI: Unable to allocate MMCONFIG resources\n");
- return;
- }
-
- names = (void *)&res[pci_mmcfg_config_num];
- for (i = 0; i < pci_mmcfg_config_num; i++, res++) {
- num_buses = pci_mmcfg_config[i].end_bus_number -
- pci_mmcfg_config[i].start_bus_number + 1;
- res->name = names;
- snprintf(names, PCI_MMCFG_RESOURCE_NAME_LEN, "PCI MMCONFIG %u",
- pci_mmcfg_config[i].pci_segment_group_number);
- res->start = pci_mmcfg_config[i].base_address;
- res->end = res->start + (num_buses << 20) - 1;
- res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
- insert_resource(&iomem_resource, res);
- names += PCI_MMCFG_RESOURCE_NAME_LEN;
- }
+ return pci_dev_base(seg, bus, devfn) != NULL;
}
-void __init pci_mmcfg_init(int type)
+int __init pci_mmcfg_arch_init(void)
{
int i;
-
- if ((pci_probe & PCI_PROBE_MMCONF) == 0)
- return;
-
- acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg);
- if ((pci_mmcfg_config_num == 0) ||
- (pci_mmcfg_config == NULL) ||
- (pci_mmcfg_config[0].base_address == 0))
- return;
-
- /* Only do this check when type 1 works. If it doesn't work
- assume we run on a Mac and always use MCFG */
- if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].base_address,
- pci_mmcfg_config[0].base_address + MMCONFIG_APER_MIN,
- E820_RESERVED)) {
- printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %x is not E820-reserved\n",
- pci_mmcfg_config[0].base_address);
- printk(KERN_ERR "PCI: Not using MMCONFIG.\n");
- return;
- }
-
- pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) * pci_mmcfg_config_num, GFP_KERNEL);
+ pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) *
+ pci_mmcfg_config_num, GFP_KERNEL);
if (pci_mmcfg_virt == NULL) {
- printk("PCI: Can not allocate memory for mmconfig structures\n");
- return;
+ printk(KERN_ERR "PCI: Can not allocate memory for mmconfig structures\n");
+ return 0;
}
+
for (i = 0; i < pci_mmcfg_config_num; ++i) {
pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i];
- pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].base_address,
- MMCONFIG_APER_MAX);
+ pci_mmcfg_virt[i].virt = mcfg_ioremap(&pci_mmcfg_config[i]);
if (!pci_mmcfg_virt[i].virt) {
- printk("PCI: Cannot map mmconfig aperture for segment %d\n",
- pci_mmcfg_config[i].pci_segment_group_number);
- return;
+ printk(KERN_ERR "PCI: Cannot map mmconfig aperture for "
+ "segment %d\n",
+ pci_mmcfg_config[i].pci_segment);
+ return 0;
}
- printk(KERN_INFO "PCI: Using MMCONFIG at %x\n", pci_mmcfg_config[i].base_address);
}
-
- unreachable_devices();
- pci_mmcfg_insert_resources();
-
raw_pci_ops = &pci_mmcfg;
- pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
+ return 1;
}
git.samba.org / sfrench / cifs-2.6.git / blobdiff