x86: coding style fixes to arch/x86/kernel/summit_32.c

[sfrench/cifs-2.6.git] / arch / x86 / kernel / summit_32.c

diff --git a/arch/x86/kernel/summit_32.c b/arch/x86/kernel/summit_32.c
index 72f463401592bfd997e502eaa9ca7264523ee640..c7b579db843dcf7aed94021e262f64d158c9041d 100644 (file)
--- a/arch/x86/kernel/summit_32.c
+++ b/arch/x86/kernel/summit_32.c
@@ -40,38 +40,40 @@ static int __init setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
        int twister = 0, node = 0;
        int i, bus, num_buses;
 
-       for(i = 0; i < rio_table_hdr->num_rio_dev; i++){
-               if (rio_devs[i]->node_id == rio_devs[wpeg_num]->owner_id){
+       for (i = 0; i < rio_table_hdr->num_rio_dev; i++) {
+               if (rio_devs[i]->node_id == rio_devs[wpeg_num]->owner_id) {
                        twister = rio_devs[i]->owner_id;
                        break;
                }
        }
-       if (i == rio_table_hdr->num_rio_dev){
+       if (i == rio_table_hdr->num_rio_dev) {
                printk(KERN_ERR "%s: Couldn't find owner Cyclone for Winnipeg!\n", __FUNCTION__);
                return last_bus;
        }
 
-       for(i = 0; i < rio_table_hdr->num_scal_dev; i++){
-               if (scal_devs[i]->node_id == twister){
+       for (i = 0; i < rio_table_hdr->num_scal_dev; i++) {
+               if (scal_devs[i]->node_id == twister) {
                        node = scal_devs[i]->node_id;
                        break;
                }
        }
-       if (i == rio_table_hdr->num_scal_dev){
+       if (i == rio_table_hdr->num_scal_dev) {
                printk(KERN_ERR "%s: Couldn't find owner Twister for Cyclone!\n", __FUNCTION__);
                return last_bus;
        }
 
-       switch (rio_devs[wpeg_num]->type){
+       switch (rio_devs[wpeg_num]->type) {
        case CompatWPEG:
-               /* The Compatibility Winnipeg controls the 2 legacy buses,
+               /*
+                * The Compatibility Winnipeg controls the 2 legacy buses,
                 * the 66MHz PCI bus [2 slots] and the 2 "extra" buses in case
                 * a PCI-PCI bridge card is used in either slot: total 5 buses.
                 */
                num_buses = 5;
                break;
        case AltWPEG:
-               /* The Alternate Winnipeg controls the 2 133MHz buses [1 slot
+               /*
+                * The Alternate Winnipeg controls the 2 133MHz buses [1 slot
                 * each], their 2 "extra" buses, the 100MHz bus [2 slots] and
                 * the "extra" buses for each of those slots: total 7 buses.
                 */
@@ -79,7 +81,8 @@ static int __init setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
                break;
        case LookOutAWPEG:
        case LookOutBWPEG:
-               /* A Lookout Winnipeg controls 3 100MHz buses [2 slots each]
+               /*
+                * A Lookout Winnipeg controls 3 100MHz buses [2 slots each]
                 * & the "extra" buses for each of those slots: total 9 buses.
                 */
                num_buses = 9;
@@ -89,7 +92,7 @@ static int __init setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
                return last_bus;
        }
 
-       for(bus = last_bus; bus < last_bus + num_buses; bus++)
+       for (bus = last_bus; bus < last_bus + num_buses; bus++)
                mp_bus_id_to_node[bus] = node;
        return bus;
 }
@@ -99,12 +102,12 @@ static int __init build_detail_arrays(void)
        unsigned long ptr;
        int i, scal_detail_size, rio_detail_size;
 
-       if (rio_table_hdr->num_scal_dev > MAX_NUMNODES){
+       if (rio_table_hdr->num_scal_dev > MAX_NUMNODES) {
                printk(KERN_WARNING "%s: MAX_NUMNODES too low!  Defined as %d, but system has %d nodes.\n", __FUNCTION__, MAX_NUMNODES, rio_table_hdr->num_scal_dev);
                return 0;
        }
 
-       switch (rio_table_hdr->version){
+       switch (rio_table_hdr->version) {
        default:
                printk(KERN_WARNING "%s: Invalid Rio Grande Table Version: %d\n", __FUNCTION__, rio_table_hdr->version);
                return 0;
@@ -119,10 +122,10 @@ static int __init build_detail_arrays(void)
        }
 
        ptr = (unsigned long)rio_table_hdr + 3;
-       for(i = 0; i < rio_table_hdr->num_scal_dev; i++, ptr += scal_detail_size)
+       for (i = 0; i < rio_table_hdr->num_scal_dev; i++, ptr += scal_detail_size)
                scal_devs[i] = (struct scal_detail *)ptr;
 
-       for(i = 0; i < rio_table_hdr->num_rio_dev; i++, ptr += rio_detail_size)
+       for (i = 0; i < rio_table_hdr->num_rio_dev; i++, ptr += rio_detail_size)
                rio_devs[i] = (struct rio_detail *)ptr;
 
        return 1;
@@ -140,9 +143,9 @@ void __init setup_summit(void)
 
        rio_table_hdr = NULL;
        offset = 0x180;
-       while (offset){
+       while (offset) {
                /* The block id is stored in the 2nd word */
-               if (*((unsigned short *)(ptr + offset + 2)) == 0x4752){
+               if (*((unsigned short *)(ptr + offset + 2)) == 0x4752) {
                        /* set the pointer past the offset & block id */
                        rio_table_hdr = (struct rio_table_hdr *)(ptr + offset + 4);
                        break;
@@ -150,7 +153,7 @@ void __init setup_summit(void)
                /* The next offset is stored in the 1st word.  0 means no more */
                offset = *((unsigned short *)(ptr + offset));
        }
-       if (!rio_table_hdr){
+       if (!rio_table_hdr) {
                printk(KERN_ERR "%s: Unable to locate Rio Grande Table in EBDA - bailing!\n", __FUNCTION__);
                return;
        }
@@ -161,8 +164,8 @@ void __init setup_summit(void)
        /* The first Winnipeg we're looking for has an index of 0 */
        next_wpeg = 0;
        do {
-               for(i = 0; i < rio_table_hdr->num_rio_dev; i++){
-                       if (is_WPEG(rio_devs[i]) && rio_devs[i]->WP_index == next_wpeg){
+               for (i = 0; i < rio_table_hdr->num_rio_dev; i++) {
+                       if (is_WPEG(rio_devs[i]) && rio_devs[i]->WP_index == next_wpeg) {
                                /* It's the Winnipeg we're looking for! */
                                next_bus = setup_pci_node_map_for_wpeg(i, next_bus);
                                next_wpeg++;