#include <asm/hw_irq.h>
#include <asm/numa.h>
-/* Number of siblings per CPU package */
-int smp_num_siblings = 1;
-EXPORT_SYMBOL(smp_num_siblings);
-
-/* Last level cache ID of each logical CPU */
-DEFINE_PER_CPU(u16, cpu_llc_id) = BAD_APICID;
-
-/* Bitmask of currently online CPUs */
-cpumask_t cpu_online_map __read_mostly;
-
-EXPORT_SYMBOL(cpu_online_map);
-
-/*
- * Private maps to synchronize booting between AP and BP.
- * Probably not needed anymore, but it makes for easier debugging. -AK
- */
-cpumask_t cpu_callin_map;
-cpumask_t cpu_callout_map;
-cpumask_t cpu_possible_map;
-EXPORT_SYMBOL(cpu_possible_map);
-
-/* Per CPU bogomips and other parameters */
-DEFINE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info);
-EXPORT_PER_CPU_SYMBOL(cpu_info);
-
/* Set when the idlers are all forked */
int smp_threads_ready;
-/* representing HT siblings of each logical CPU */
-DEFINE_PER_CPU(cpumask_t, cpu_sibling_map);
-EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
-
-/* representing HT and core siblings of each logical CPU */
-DEFINE_PER_CPU(cpumask_t, cpu_core_map);
-EXPORT_PER_CPU_SYMBOL(cpu_core_map);
-
/*
* Trampoline 80x86 program as an array.
*/
return c->llc_shared_map;
}
-/* representing cpus for which sibling maps can be computed */
-static cpumask_t cpu_sibling_setup_map;
-
-static inline void set_cpu_sibling_map(int cpu)
-{
- int i;
- struct cpuinfo_x86 *c = &cpu_data(cpu);
-
- cpu_set(cpu, cpu_sibling_setup_map);
-
- if (smp_num_siblings > 1) {
- for_each_cpu_mask(i, cpu_sibling_setup_map) {
- if (c->phys_proc_id == cpu_data(i).phys_proc_id &&
- c->cpu_core_id == cpu_data(i).cpu_core_id) {
- cpu_set(i, per_cpu(cpu_sibling_map, cpu));
- cpu_set(cpu, per_cpu(cpu_sibling_map, i));
- cpu_set(i, per_cpu(cpu_core_map, cpu));
- cpu_set(cpu, per_cpu(cpu_core_map, i));
- cpu_set(i, c->llc_shared_map);
- cpu_set(cpu, cpu_data(i).llc_shared_map);
- }
- }
- } else {
- cpu_set(cpu, per_cpu(cpu_sibling_map, cpu));
- }
-
- cpu_set(cpu, c->llc_shared_map);
-
- if (current_cpu_data.x86_max_cores == 1) {
- per_cpu(cpu_core_map, cpu) = per_cpu(cpu_sibling_map, cpu);
- c->booted_cores = 1;
- return;
- }
-
- for_each_cpu_mask(i, cpu_sibling_setup_map) {
- if (per_cpu(cpu_llc_id, cpu) != BAD_APICID &&
- per_cpu(cpu_llc_id, cpu) == per_cpu(cpu_llc_id, i)) {
- cpu_set(i, c->llc_shared_map);
- cpu_set(cpu, cpu_data(i).llc_shared_map);
- }
- if (c->phys_proc_id == cpu_data(i).phys_proc_id) {
- cpu_set(i, per_cpu(cpu_core_map, cpu));
- cpu_set(cpu, per_cpu(cpu_core_map, i));
- /*
- * Does this new cpu bringup a new core?
- */
- if (cpus_weight(per_cpu(cpu_sibling_map, cpu)) == 1) {
- /*
- * for each core in package, increment
- * the booted_cores for this new cpu
- */
- if (first_cpu(per_cpu(cpu_sibling_map, i)) == i)
- c->booted_cores++;
- /*
- * increment the core count for all
- * the other cpus in this package
- */
- if (i != cpu)
- cpu_data(i).booted_cores++;
- } else if (i != cpu && !c->booted_cores)
- c->booted_cores = cpu_data(i).booted_cores;
- }
- }
-}
-
/*
* Setup code on secondary processor (after comming out of the trampoline)
*/
int timeout;
unsigned long start_rip;
struct create_idle c_idle = {
- .work = __WORK_INITIALIZER(c_idle.work, do_fork_idle),
.cpu = cpu,
.done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done),
};
+ INIT_WORK(&c_idle.work, do_fork_idle);
/* allocate memory for gdts of secondary cpus. Hotplug is considered */
if (!cpu_gdt_descr[cpu].address &&
cpu_set(0, per_cpu(cpu_core_map, 0));
}
-#ifdef CONFIG_HOTPLUG_CPU
-
-int additional_cpus __initdata = -1;
-
-/*
- * cpu_possible_map should be static, it cannot change as cpu's
- * are onlined, or offlined. The reason is per-cpu data-structures
- * are allocated by some modules at init time, and dont expect to
- * do this dynamically on cpu arrival/departure.
- * cpu_present_map on the other hand can change dynamically.
- * In case when cpu_hotplug is not compiled, then we resort to current
- * behaviour, which is cpu_possible == cpu_present.
- * - Ashok Raj
- *
- * Three ways to find out the number of additional hotplug CPUs:
- * - If the BIOS specified disabled CPUs in ACPI/mptables use that.
- * - The user can overwrite it with additional_cpus=NUM
- * - Otherwise don't reserve additional CPUs.
- * We do this because additional CPUs waste a lot of memory.
- * -AK
- */
-__init void prefill_possible_map(void)
-{
- int i;
- int possible;
-
- if (additional_cpus == -1) {
- if (disabled_cpus > 0)
- additional_cpus = disabled_cpus;
- else
- additional_cpus = 0;
- }
- possible = num_processors + additional_cpus;
- if (possible > NR_CPUS)
- possible = NR_CPUS;
-
- printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n",
- possible,
- max_t(int, possible - num_processors, 0));
-
- for (i = 0; i < possible; i++)
- cpu_set(i, cpu_possible_map);
-}
-#endif
-
/*
* Various sanity checks.
*/
* Prepare for SMP bootup. The MP table or ACPI has been read
* earlier. Just do some sanity checking here and enable APIC mode.
*/
-void __init smp_prepare_cpus(unsigned int max_cpus)
+void __init native_smp_prepare_cpus(unsigned int max_cpus)
{
nmi_watchdog_default();
smp_cpu_index_default();
/*
* Early setup to make printk work.
*/
-void __init smp_prepare_boot_cpu(void)
+void __init native_smp_prepare_boot_cpu(void)
{
int me = smp_processor_id();
/* already set me in cpu_online_map in boot_cpu_init() */
/*
* Entry point to boot a CPU.
*/
-int __cpuinit __cpu_up(unsigned int cpu)
+int __cpuinit native_cpu_up(unsigned int cpu)
{
int apicid = cpu_present_to_apicid(cpu);
unsigned long flags;
/*
* Finish the SMP boot.
*/
-void __init smp_cpus_done(unsigned int max_cpus)
+void __init native_smp_cpus_done(unsigned int max_cpus)
{
smp_cleanup_boot();
setup_ioapic_dest();
}
#ifdef CONFIG_HOTPLUG_CPU
-
-static void remove_siblinginfo(int cpu)
-{
- int sibling;
- struct cpuinfo_x86 *c = &cpu_data(cpu);
-
- for_each_cpu_mask(sibling, per_cpu(cpu_core_map, cpu)) {
- cpu_clear(cpu, per_cpu(cpu_core_map, sibling));
- /*
- * last thread sibling in this cpu core going down
- */
- if (cpus_weight(per_cpu(cpu_sibling_map, cpu)) == 1)
- cpu_data(sibling).booted_cores--;
- }
-
- for_each_cpu_mask(sibling, per_cpu(cpu_sibling_map, cpu))
- cpu_clear(cpu, per_cpu(cpu_sibling_map, sibling));
- cpus_clear(per_cpu(cpu_sibling_map, cpu));
- cpus_clear(per_cpu(cpu_core_map, cpu));
- c->phys_proc_id = 0;
- c->cpu_core_id = 0;
- cpu_clear(cpu, cpu_sibling_setup_map);
-}
-
-void remove_cpu_from_maps(void)
+static void __ref remove_cpu_from_maps(void)
{
int cpu = smp_processor_id();
printk(KERN_ERR "CPU %u didn't die...\n", cpu);
}
-static __init int setup_additional_cpus(char *s)
-{
- return s && get_option(&s, &additional_cpus) ? 0 : -EINVAL;
-}
-early_param("additional_cpus", setup_additional_cpus);
-
#else /* ... !CONFIG_HOTPLUG_CPU */
int __cpu_disable(void)