#include <asm/vmi.h>
#include <asm/mtrr.h>
-/* Set if we find a B stepping CPU */
-static int __cpuinitdata smp_b_stepping;
-
-static cpumask_t smp_commenced_mask;
-
/* which logical CPU number maps to which CPU (physical APIC ID) */
u16 x86_cpu_to_apicid_init[NR_CPUS] __initdata =
{ [0 ... NR_CPUS-1] = BAD_APICID };
DEFINE_PER_CPU(u16, x86_cpu_to_apicid) = BAD_APICID;
EXPORT_PER_CPU_SYMBOL(x86_cpu_to_apicid);
-u8 apicid_2_node[MAX_APICID];
-
-/*
- * Trampoline 80x86 program as an array.
- */
+u16 x86_bios_cpu_apicid_init[NR_CPUS] __initdata
+ = { [0 ... NR_CPUS-1] = BAD_APICID };
+void *x86_bios_cpu_apicid_early_ptr;
+DEFINE_PER_CPU(u16, x86_bios_cpu_apicid) = BAD_APICID;
+EXPORT_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
-extern const unsigned char trampoline_data [];
-extern const unsigned char trampoline_end [];
-static unsigned char *trampoline_base;
+u8 apicid_2_node[MAX_APICID];
-static void map_cpu_to_logical_apicid(void);
+extern void map_cpu_to_logical_apicid(void);
+extern void unmap_cpu_to_logical_apicid(int cpu);
/* State of each CPU. */
DEFINE_PER_CPU(int, cpu_state) = { 0 };
-/*
- * Currently trivial. Write the real->protected mode
- * bootstrap into the page concerned. The caller
- * has made sure it's suitably aligned.
- */
-
-static unsigned long __cpuinit setup_trampoline(void)
-{
- memcpy(trampoline_base, trampoline_data, trampoline_end - trampoline_data);
- return virt_to_phys(trampoline_base);
-}
-
-/*
- * We are called very early to get the low memory for the
- * SMP bootup trampoline page.
- */
-void __init smp_alloc_memory(void)
-{
- trampoline_base = alloc_bootmem_low_pages(PAGE_SIZE);
- /*
- * Has to be in very low memory so we can execute
- * real-mode AP code.
- */
- if (__pa(trampoline_base) >= 0x9F000)
- BUG();
-}
-
-/*
- * The bootstrap kernel entry code has set these up. Save them for
- * a given CPU
- */
-
-void __cpuinit smp_store_cpu_info(int id)
-{
- struct cpuinfo_x86 *c = &cpu_data(id);
-
- *c = boot_cpu_data;
- c->cpu_index = id;
- if (id!=0)
- identify_secondary_cpu(c);
- /*
- * Mask B, Pentium, but not Pentium MMX
- */
- if (c->x86_vendor == X86_VENDOR_INTEL &&
- c->x86 == 5 &&
- c->x86_mask >= 1 && c->x86_mask <= 4 &&
- c->x86_model <= 3)
- /*
- * Remember we have B step Pentia with bugs
- */
- smp_b_stepping = 1;
-
- /*
- * Certain Athlons might work (for various values of 'work') in SMP
- * but they are not certified as MP capable.
- */
- if ((c->x86_vendor == X86_VENDOR_AMD) && (c->x86 == 6)) {
-
- if (num_possible_cpus() == 1)
- goto valid_k7;
-
- /* Athlon 660/661 is valid. */
- if ((c->x86_model==6) && ((c->x86_mask==0) || (c->x86_mask==1)))
- goto valid_k7;
-
- /* Duron 670 is valid */
- if ((c->x86_model==7) && (c->x86_mask==0))
- goto valid_k7;
-
- /*
- * Athlon 662, Duron 671, and Athlon >model 7 have capability bit.
- * It's worth noting that the A5 stepping (662) of some Athlon XP's
- * have the MP bit set.
- * See http://www.heise.de/newsticker/data/jow-18.10.01-000 for more.
- */
- if (((c->x86_model==6) && (c->x86_mask>=2)) ||
- ((c->x86_model==7) && (c->x86_mask>=1)) ||
- (c->x86_model> 7))
- if (cpu_has_mp)
- goto valid_k7;
-
- /* If we get here, it's not a certified SMP capable AMD system. */
- add_taint(TAINT_UNSAFE_SMP);
- }
-
-valid_k7:
- ;
-}
-
-static atomic_t init_deasserted;
-
-static void __cpuinit smp_callin(void)
-{
- int cpuid, phys_id;
- unsigned long timeout;
-
- /*
- * If waken up by an INIT in an 82489DX configuration
- * we may get here before an INIT-deassert IPI reaches
- * our local APIC. We have to wait for the IPI or we'll
- * lock up on an APIC access.
- */
- wait_for_init_deassert(&init_deasserted);
-
- /*
- * (This works even if the APIC is not enabled.)
- */
- phys_id = GET_APIC_ID(apic_read(APIC_ID));
- cpuid = smp_processor_id();
- if (cpu_isset(cpuid, cpu_callin_map)) {
- printk("huh, phys CPU#%d, CPU#%d already present??\n",
- phys_id, cpuid);
- BUG();
- }
- Dprintk("CPU#%d (phys ID: %d) waiting for CALLOUT\n", cpuid, phys_id);
-
- /*
- * STARTUP IPIs are fragile beasts as they might sometimes
- * trigger some glue motherboard logic. Complete APIC bus
- * silence for 1 second, this overestimates the time the
- * boot CPU is spending to send the up to 2 STARTUP IPIs
- * by a factor of two. This should be enough.
- */
-
- /*
- * Waiting 2s total for startup (udelay is not yet working)
- */
- timeout = jiffies + 2*HZ;
- while (time_before(jiffies, timeout)) {
- /*
- * Has the boot CPU finished it's STARTUP sequence?
- */
- if (cpu_isset(cpuid, cpu_callout_map))
- break;
- rep_nop();
- }
-
- if (!time_before(jiffies, timeout)) {
- printk("BUG: CPU%d started up but did not get a callout!\n",
- cpuid);
- BUG();
- }
-
- /*
- * the boot CPU has finished the init stage and is spinning
- * on callin_map until we finish. We are free to set up this
- * CPU, first the APIC. (this is probably redundant on most
- * boards)
- */
-
- Dprintk("CALLIN, before setup_local_APIC().\n");
- smp_callin_clear_local_apic();
- setup_local_APIC();
- map_cpu_to_logical_apicid();
-
- /*
- * Get our bogomips.
- */
- calibrate_delay();
- Dprintk("Stack at about %p\n",&cpuid);
-
- /*
- * Save our processor parameters
- */
- smp_store_cpu_info(cpuid);
-
- /*
- * Allow the master to continue.
- */
- cpu_set(cpuid, cpu_callin_map);
-}
-
-static int cpucount;
-
-/*
- * Activate a secondary processor.
- */
-static void __cpuinit start_secondary(void *unused)
-{
- /*
- * Don't put *anything* before cpu_init(), SMP booting is too
- * fragile that we want to limit the things done here to the
- * most necessary things.
- */
-#ifdef CONFIG_VMI
- vmi_bringup();
-#endif
- cpu_init();
- preempt_disable();
- smp_callin();
- while (!cpu_isset(smp_processor_id(), smp_commenced_mask))
- rep_nop();
- /*
- * Check TSC synchronization with the BP:
- */
- check_tsc_sync_target();
-
- setup_secondary_clock();
- if (nmi_watchdog == NMI_IO_APIC) {
- disable_8259A_irq(0);
- enable_NMI_through_LVT0();
- enable_8259A_irq(0);
- }
- /*
- * low-memory mappings have been cleared, flush them from
- * the local TLBs too.
- */
- local_flush_tlb();
-
- /* This must be done before setting cpu_online_map */
- set_cpu_sibling_map(raw_smp_processor_id());
- wmb();
-
- /*
- * We need to hold call_lock, so there is no inconsistency
- * between the time smp_call_function() determines number of
- * IPI recipients, and the time when the determination is made
- * for which cpus receive the IPI. Holding this
- * lock helps us to not include this cpu in a currently in progress
- * smp_call_function().
- */
- lock_ipi_call_lock();
- cpu_set(smp_processor_id(), cpu_online_map);
- unlock_ipi_call_lock();
- per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
-
- /* We can take interrupts now: we're officially "up". */
- local_irq_enable();
-
- wmb();
- cpu_idle();
-}
-
-/*
- * Everything has been set up for the secondary
- * CPUs - they just need to reload everything
- * from the task structure
- * This function must not return.
- */
-void __devinit initialize_secondary(void)
-{
- /*
- * We don't actually need to load the full TSS,
- * basically just the stack pointer and the ip.
- */
-
- asm volatile(
- "movl %0,%%esp\n\t"
- "jmp *%1"
- :
- :"m" (current->thread.sp),"m" (current->thread.ip));
-}
-
-/* Static state in head.S used to set up a CPU */
-extern struct {
- void * sp;
- unsigned short ss;
-} stack_start;
-
-#ifdef CONFIG_NUMA
-
-/* which logical CPUs are on which nodes */
-cpumask_t node_to_cpumask_map[MAX_NUMNODES] __read_mostly =
- { [0 ... MAX_NUMNODES-1] = CPU_MASK_NONE };
-EXPORT_SYMBOL(node_to_cpumask_map);
-/* which node each logical CPU is on */
-int cpu_to_node_map[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = 0 };
-EXPORT_SYMBOL(cpu_to_node_map);
-
-/* set up a mapping between cpu and node. */
-static inline void map_cpu_to_node(int cpu, int node)
-{
- printk("Mapping cpu %d to node %d\n", cpu, node);
- cpu_set(cpu, node_to_cpumask_map[node]);
- cpu_to_node_map[cpu] = node;
-}
-
-/* undo a mapping between cpu and node. */
-static inline void unmap_cpu_to_node(int cpu)
-{
- int node;
-
- printk("Unmapping cpu %d from all nodes\n", cpu);
- for (node = 0; node < MAX_NUMNODES; node ++)
- cpu_clear(cpu, node_to_cpumask_map[node]);
- cpu_to_node_map[cpu] = 0;
-}
-#else /* !CONFIG_NUMA */
-
-#define map_cpu_to_node(cpu, node) ({})
-#define unmap_cpu_to_node(cpu) ({})
-
-#endif /* CONFIG_NUMA */
-
-u8 cpu_2_logical_apicid[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID };
-
-static void map_cpu_to_logical_apicid(void)
-{
- int cpu = smp_processor_id();
- int apicid = logical_smp_processor_id();
- int node = apicid_to_node(apicid);
-
- if (!node_online(node))
- node = first_online_node;
-
- cpu_2_logical_apicid[cpu] = apicid;
- map_cpu_to_node(cpu, node);
-}
-
-static void unmap_cpu_to_logical_apicid(int cpu)
-{
- cpu_2_logical_apicid[cpu] = BAD_APICID;
- unmap_cpu_to_node(cpu);
-}
-
-static inline void __inquire_remote_apic(int apicid)
-{
- int i, regs[] = { APIC_ID >> 4, APIC_LVR >> 4, APIC_SPIV >> 4 };
- char *names[] = { "ID", "VERSION", "SPIV" };
- int timeout;
- unsigned long status;
-
- printk("Inquiring remote APIC #%d...\n", apicid);
-
- for (i = 0; i < ARRAY_SIZE(regs); i++) {
- printk("... APIC #%d %s: ", apicid, names[i]);
-
- /*
- * Wait for idle.
- */
- status = safe_apic_wait_icr_idle();
- if (status)
- printk("a previous APIC delivery may have failed\n");
-
- apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
- apic_write_around(APIC_ICR, APIC_DM_REMRD | regs[i]);
-
- timeout = 0;
- do {
- udelay(100);
- status = apic_read(APIC_ICR) & APIC_ICR_RR_MASK;
- } while (status == APIC_ICR_RR_INPROG && timeout++ < 1000);
-
- switch (status) {
- case APIC_ICR_RR_VALID:
- status = apic_read(APIC_RRR);
- printk("%lx\n", status);
- break;
- default:
- printk("failed\n");
- }
- }
-}
-
-#ifdef WAKE_SECONDARY_VIA_NMI
-/*
- * Poke the other CPU in the eye via NMI to wake it up. Remember that the normal
- * INIT, INIT, STARTUP sequence will reset the chip hard for us, and this
- * won't ... remember to clear down the APIC, etc later.
- */
-static int __devinit
-wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip)
-{
- unsigned long send_status, accept_status = 0;
- int maxlvt;
-
- /* Target chip */
- apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(logical_apicid));
-
- /* Boot on the stack */
- /* Kick the second */
- apic_write_around(APIC_ICR, APIC_DM_NMI | APIC_DEST_LOGICAL);
-
- Dprintk("Waiting for send to finish...\n");
- send_status = safe_apic_wait_icr_idle();
-
- /*
- * Give the other CPU some time to accept the IPI.
- */
- udelay(200);
- /*
- * Due to the Pentium erratum 3AP.
- */
- maxlvt = lapic_get_maxlvt();
- if (maxlvt > 3) {
- apic_read_around(APIC_SPIV);
- apic_write(APIC_ESR, 0);
- }
- accept_status = (apic_read(APIC_ESR) & 0xEF);
- Dprintk("NMI sent.\n");
-
- if (send_status)
- printk("APIC never delivered???\n");
- if (accept_status)
- printk("APIC delivery error (%lx).\n", accept_status);
-
- return (send_status | accept_status);
-}
-#endif /* WAKE_SECONDARY_VIA_NMI */
-
-#ifdef WAKE_SECONDARY_VIA_INIT
-static int __devinit
-wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
-{
- unsigned long send_status, accept_status = 0;
- int maxlvt, num_starts, j;
-
- /*
- * Be paranoid about clearing APIC errors.
- */
- if (APIC_INTEGRATED(apic_version[phys_apicid])) {
- apic_read_around(APIC_SPIV);
- apic_write(APIC_ESR, 0);
- apic_read(APIC_ESR);
- }
-
- Dprintk("Asserting INIT.\n");
-
- /*
- * Turn INIT on target chip
- */
- apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
-
- /*
- * Send IPI
- */
- apic_write_around(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT
- | APIC_DM_INIT);
-
- Dprintk("Waiting for send to finish...\n");
- send_status = safe_apic_wait_icr_idle();
-
- mdelay(10);
-
- Dprintk("Deasserting INIT.\n");
-
- /* Target chip */
- apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
-
- /* Send IPI */
- apic_write_around(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT);
-
- Dprintk("Waiting for send to finish...\n");
- send_status = safe_apic_wait_icr_idle();
-
- atomic_set(&init_deasserted, 1);
-
- /*
- * Should we send STARTUP IPIs ?
- *
- * Determine this based on the APIC version.
- * If we don't have an integrated APIC, don't send the STARTUP IPIs.
- */
- if (APIC_INTEGRATED(apic_version[phys_apicid]))
- num_starts = 2;
- else
- num_starts = 0;
-
- /*
- * Paravirt / VMI wants a startup IPI hook here to set up the
- * target processor state.
- */
- startup_ipi_hook(phys_apicid, (unsigned long) start_secondary,
- (unsigned long) stack_start.sp);
-
- /*
- * Run STARTUP IPI loop.
- */
- Dprintk("#startup loops: %d.\n", num_starts);
-
- maxlvt = lapic_get_maxlvt();
-
- for (j = 1; j <= num_starts; j++) {
- Dprintk("Sending STARTUP #%d.\n",j);
- apic_read_around(APIC_SPIV);
- apic_write(APIC_ESR, 0);
- apic_read(APIC_ESR);
- Dprintk("After apic_write.\n");
-
- /*
- * STARTUP IPI
- */
-
- /* Target chip */
- apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
-
- /* Boot on the stack */
- /* Kick the second */
- apic_write_around(APIC_ICR, APIC_DM_STARTUP
- | (start_eip >> 12));
-
- /*
- * Give the other CPU some time to accept the IPI.
- */
- udelay(300);
-
- Dprintk("Startup point 1.\n");
-
- Dprintk("Waiting for send to finish...\n");
- send_status = safe_apic_wait_icr_idle();
-
- /*
- * Give the other CPU some time to accept the IPI.
- */
- udelay(200);
- /*
- * Due to the Pentium erratum 3AP.
- */
- if (maxlvt > 3) {
- apic_read_around(APIC_SPIV);
- apic_write(APIC_ESR, 0);
- }
- accept_status = (apic_read(APIC_ESR) & 0xEF);
- if (send_status || accept_status)
- break;
- }
- Dprintk("After Startup.\n");
-
- if (send_status)
- printk("APIC never delivered???\n");
- if (accept_status)
- printk("APIC delivery error (%lx).\n", accept_status);
-
- return (send_status | accept_status);
-}
-#endif /* WAKE_SECONDARY_VIA_INIT */
-
-extern cpumask_t cpu_initialized;
-static inline int alloc_cpu_id(void)
-{
- cpumask_t tmp_map;
- int cpu;
- cpus_complement(tmp_map, cpu_present_map);
- cpu = first_cpu(tmp_map);
- if (cpu >= NR_CPUS)
- return -ENODEV;
- return cpu;
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-static struct task_struct * __cpuinitdata cpu_idle_tasks[NR_CPUS];
-static inline struct task_struct * __cpuinit alloc_idle_task(int cpu)
-{
- struct task_struct *idle;
-
- if ((idle = cpu_idle_tasks[cpu]) != NULL) {
- /* initialize thread_struct. we really want to avoid destroy
- * idle tread
- */
- idle->thread.sp = (unsigned long)task_pt_regs(idle);
- init_idle(idle, cpu);
- return idle;
- }
- idle = fork_idle(cpu);
-
- if (!IS_ERR(idle))
- cpu_idle_tasks[cpu] = idle;
- return idle;
-}
-#else
-#define alloc_idle_task(cpu) fork_idle(cpu)
-#endif
-
-static int __cpuinit do_boot_cpu(int apicid, int cpu)
-/*
- * NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad
- * (ie clustered apic addressing mode), this is a LOGICAL apic ID.
- * Returns zero if CPU booted OK, else error code from wakeup_secondary_cpu.
- */
-{
- struct task_struct *idle;
- unsigned long boot_error;
- int timeout;
- unsigned long start_eip;
- unsigned short nmi_high = 0, nmi_low = 0;
-
- /*
- * Save current MTRR state in case it was changed since early boot
- * (e.g. by the ACPI SMI) to initialize new CPUs with MTRRs in sync:
- */
- mtrr_save_state();
-
- /*
- * We can't use kernel_thread since we must avoid to
- * reschedule the child.
- */
- idle = alloc_idle_task(cpu);
- if (IS_ERR(idle))
- panic("failed fork for CPU %d", cpu);
-
- init_gdt(cpu);
- per_cpu(current_task, cpu) = idle;
- early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu);
-
- idle->thread.ip = (unsigned long) start_secondary;
- /* start_eip had better be page-aligned! */
- start_eip = setup_trampoline();
-
- ++cpucount;
- alternatives_smp_switch(1);
-
- /* So we see what's up */
- printk("Booting processor %d/%d ip %lx\n", cpu, apicid, start_eip);
- /* Stack for startup_32 can be just as for start_secondary onwards */
- stack_start.sp = (void *) idle->thread.sp;
-
- irq_ctx_init(cpu);
-
- per_cpu(x86_cpu_to_apicid, cpu) = apicid;
- /*
- * This grunge runs the startup process for
- * the targeted processor.
- */
-
- atomic_set(&init_deasserted, 0);
-
- Dprintk("Setting warm reset code and vector.\n");
-
- store_NMI_vector(&nmi_high, &nmi_low);
-
- smpboot_setup_warm_reset_vector(start_eip);
-
- /*
- * Starting actual IPI sequence...
- */
- boot_error = wakeup_secondary_cpu(apicid, start_eip);
-
- if (!boot_error) {
- /*
- * allow APs to start initializing.
- */
- Dprintk("Before Callout %d.\n", cpu);
- cpu_set(cpu, cpu_callout_map);
- Dprintk("After Callout %d.\n", cpu);
-
- /*
- * Wait 5s total for a response
- */
- for (timeout = 0; timeout < 50000; timeout++) {
- if (cpu_isset(cpu, cpu_callin_map))
- break; /* It has booted */
- udelay(100);
- }
-
- if (cpu_isset(cpu, cpu_callin_map)) {
- /* number CPUs logically, starting from 1 (BSP is 0) */
- Dprintk("OK.\n");
- printk("CPU%d: ", cpu);
- print_cpu_info(&cpu_data(cpu));
- Dprintk("CPU has booted.\n");
- } else {
- boot_error= 1;
- if (*((volatile unsigned char *)trampoline_base)
- == 0xA5)
- /* trampoline started but...? */
- printk("Stuck ??\n");
- else
- /* trampoline code not run */
- printk("Not responding.\n");
- inquire_remote_apic(apicid);
- }
- }
-
- if (boot_error) {
- /* Try to put things back the way they were before ... */
- unmap_cpu_to_logical_apicid(cpu);
- cpu_clear(cpu, cpu_callout_map); /* was set here (do_boot_cpu()) */
- cpu_clear(cpu, cpu_initialized); /* was set by cpu_init() */
- cpucount--;
- } else {
- per_cpu(x86_cpu_to_apicid, cpu) = apicid;
- cpu_set(cpu, cpu_present_map);
- }
-
- /* mark "stuck" area as not stuck */
- *((volatile unsigned long *)trampoline_base) = 0;
-
- return boot_error;
-}
-
#ifdef CONFIG_HOTPLUG_CPU
void cpu_exit_clear(void)
{
idle_task_exit();
- cpucount --;
cpu_uninit();
irq_ctx_exit(cpu);
cpu_clear(cpu, cpu_callout_map);
cpu_clear(cpu, cpu_callin_map);
- cpu_clear(cpu, smp_commenced_mask);
unmap_cpu_to_logical_apicid(cpu);
}
-
-struct warm_boot_cpu_info {
- struct completion *complete;
- struct work_struct task;
- int apicid;
- int cpu;
-};
-
-static void __cpuinit do_warm_boot_cpu(struct work_struct *work)
-{
- struct warm_boot_cpu_info *info =
- container_of(work, struct warm_boot_cpu_info, task);
- do_boot_cpu(info->apicid, info->cpu);
- complete(info->complete);
-}
-
-static int __cpuinit __smp_prepare_cpu(int cpu)
-{
- DECLARE_COMPLETION_ONSTACK(done);
- struct warm_boot_cpu_info info;
- int apicid, ret;
-
- apicid = per_cpu(x86_cpu_to_apicid, cpu);
- if (apicid == BAD_APICID) {
- ret = -ENODEV;
- goto exit;
- }
-
- info.complete = &done;
- info.apicid = apicid;
- info.cpu = cpu;
- INIT_WORK(&info.task, do_warm_boot_cpu);
-
- /* init low mem mapping */
- clone_pgd_range(swapper_pg_dir, swapper_pg_dir + USER_PGD_PTRS,
- min_t(unsigned long, KERNEL_PGD_PTRS, USER_PGD_PTRS));
- flush_tlb_all();
- schedule_work(&info.task);
- wait_for_completion(&done);
-
- zap_low_mappings();
- ret = 0;
-exit:
- return ret;
-}
#endif
-/*
- * Cycle through the processors sending APIC IPIs to boot each.
- */
-
static int boot_cpu_logical_apicid;
/* Where the IO area was mapped on multiquad, always 0 otherwise */
void *xquad_portio;
EXPORT_SYMBOL(xquad_portio);
#endif
-static void __init smp_boot_cpus(unsigned int max_cpus)
+static void __init disable_smp(void)
{
- int apicid, cpu, bit, kicked;
- unsigned long bogosum = 0;
-
- /*
- * Setup boot CPU information
- */
- smp_store_cpu_info(0); /* Final full version of the data */
- printk("CPU%d: ", 0);
- print_cpu_info(&cpu_data(0));
-
- boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
- boot_cpu_logical_apicid = logical_smp_processor_id();
- per_cpu(x86_cpu_to_apicid, 0) = boot_cpu_physical_apicid;
-
- current_thread_info()->cpu = 0;
-
- set_cpu_sibling_map(0);
+ cpu_possible_map = cpumask_of_cpu(0);
+ cpu_present_map = cpumask_of_cpu(0);
+ smpboot_clear_io_apic_irqs();
+ phys_cpu_present_map = physid_mask_of_physid(0);
+ map_cpu_to_logical_apicid();
+ cpu_set(0, per_cpu(cpu_sibling_map, 0));
+ cpu_set(0, per_cpu(cpu_core_map, 0));
+}
+static int __init smp_sanity_check(unsigned max_cpus)
+{
/*
* If we couldn't find an SMP configuration at boot time,
* get out of here now!
*/
if (!smp_found_config && !acpi_lapic) {
printk(KERN_NOTICE "SMP motherboard not detected.\n");
- smpboot_clear_io_apic_irqs();
- phys_cpu_present_map = physid_mask_of_physid(0);
+ disable_smp();
if (APIC_init_uniprocessor())
printk(KERN_NOTICE "Local APIC not detected."
" Using dummy APIC emulation.\n");
- map_cpu_to_logical_apicid();
- cpu_set(0, per_cpu(cpu_sibling_map, 0));
- cpu_set(0, per_cpu(cpu_core_map, 0));
- return;
+ return -1;
}
/*
printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
boot_cpu_physical_apicid);
printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n");
- smpboot_clear_io_apic_irqs();
- phys_cpu_present_map = physid_mask_of_physid(0);
- map_cpu_to_logical_apicid();
- cpu_set(0, per_cpu(cpu_sibling_map, 0));
- cpu_set(0, per_cpu(cpu_core_map, 0));
- return;
+ return -1;
}
verify_local_APIC();
printk(KERN_INFO "activating minimal APIC for NMI watchdog use.\n");
connect_bsp_APIC();
setup_local_APIC();
+ end_local_APIC_setup();
}
- smpboot_clear_io_apic_irqs();
- phys_cpu_present_map = physid_mask_of_physid(0);
- map_cpu_to_logical_apicid();
- cpu_set(0, per_cpu(cpu_sibling_map, 0));
- cpu_set(0, per_cpu(cpu_core_map, 0));
- return;
+ return -1;
}
+ return 0;
+}
- connect_bsp_APIC();
- setup_local_APIC();
- map_cpu_to_logical_apicid();
-
-
- setup_portio_remap();
-
+/*
+ * Cycle through the processors sending APIC IPIs to boot each.
+ */
+static void __init smp_boot_cpus(unsigned int max_cpus)
+{
/*
- * Scan the CPU present map and fire up the other CPUs via do_boot_cpu
- *
- * In clustered apic mode, phys_cpu_present_map is a constructed thus:
- * bits 0-3 are quad0, 4-7 are quad1, etc. A perverse twist on the
- * clustered apic ID.
+ * Setup boot CPU information
*/
- Dprintk("CPU present map: %lx\n", physids_coerce(phys_cpu_present_map));
-
- kicked = 1;
- for (bit = 0; kicked < NR_CPUS && bit < MAX_APICS; bit++) {
- apicid = cpu_present_to_apicid(bit);
- /*
- * Don't even attempt to start the boot CPU!
- */
- if ((apicid == boot_cpu_apicid) || (apicid == BAD_APICID))
- continue;
-
- if (!check_apicid_present(bit))
- continue;
- if (max_cpus <= cpucount+1)
- continue;
-
- if (((cpu = alloc_cpu_id()) <= 0) || do_boot_cpu(apicid, cpu))
- printk("CPU #%d not responding - cannot use it.\n",
- apicid);
- else
- ++kicked;
- }
+ smp_store_cpu_info(0); /* Final full version of the data */
+ printk(KERN_INFO "CPU%d: ", 0);
+ print_cpu_info(&cpu_data(0));
- /*
- * Cleanup possible dangling ends...
- */
- smpboot_restore_warm_reset_vector();
+ boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
+ boot_cpu_logical_apicid = logical_smp_processor_id();
- /*
- * Allow the user to impress friends.
- */
- Dprintk("Before bogomips.\n");
- for_each_possible_cpu(cpu)
- if (cpu_isset(cpu, cpu_callout_map))
- bogosum += cpu_data(cpu).loops_per_jiffy;
- printk(KERN_INFO
- "Total of %d processors activated (%lu.%02lu BogoMIPS).\n",
- cpucount+1,
- bogosum/(500000/HZ),
- (bogosum/(5000/HZ))%100);
-
- Dprintk("Before bogocount - setting activated=1.\n");
+ current_thread_info()->cpu = 0;
- if (smp_b_stepping)
- printk(KERN_WARNING "WARNING: SMP operation may be unreliable with B stepping processors.\n");
+ set_cpu_sibling_map(0);
- /*
- * Don't taint if we are running SMP kernel on a single non-MP
- * approved Athlon
- */
- if (tainted & TAINT_UNSAFE_SMP) {
- if (cpucount)
- printk (KERN_INFO "WARNING: This combination of AMD processors is not suitable for SMP.\n");
- else
- tainted &= ~TAINT_UNSAFE_SMP;
+ if (smp_sanity_check(max_cpus) < 0) {
+ printk(KERN_INFO "SMP disabled\n");
+ disable_smp();
+ return;
}
- Dprintk("Boot done.\n");
+ connect_bsp_APIC();
+ setup_local_APIC();
+ end_local_APIC_setup();
+ map_cpu_to_logical_apicid();
- /*
- * construct cpu_sibling_map, so that we can tell sibling CPUs
- * efficiently.
- */
- for_each_possible_cpu(cpu) {
- cpus_clear(per_cpu(cpu_sibling_map, cpu));
- cpus_clear(per_cpu(cpu_core_map, cpu));
- }
- cpu_set(0, per_cpu(cpu_sibling_map, 0));
- cpu_set(0, per_cpu(cpu_core_map, 0));
+ setup_portio_remap();
smpboot_setup_io_apic();
who understands all this stuff should rewrite it properly. --RR 15/Jul/02 */
void __init native_smp_prepare_cpus(unsigned int max_cpus)
{
- smp_commenced_mask = cpumask_of_cpu(0);
+ nmi_watchdog_default();
cpu_callin_map = cpumask_of_cpu(0);
mb();
smp_boot_cpus(max_cpus);
init_gdt(cpu);
switch_to_new_gdt();
- cpu_set(cpu, cpu_online_map);
cpu_set(cpu, cpu_callout_map);
- cpu_set(cpu, cpu_present_map);
- cpu_set(cpu, cpu_possible_map);
__get_cpu_var(cpu_state) = CPU_ONLINE;
}
-#ifdef CONFIG_HOTPLUG_CPU
-static void __ref remove_cpu_from_maps(int cpu)
-{
- cpu_clear(cpu, cpu_online_map);
-}
-
-int __cpu_disable(void)
-{
- cpumask_t map = cpu_online_map;
- int cpu = smp_processor_id();
-
- /*
- * Perhaps use cpufreq to drop frequency, but that could go
- * into generic code.
- *
- * We won't take down the boot processor on i386 due to some
- * interrupts only being able to be serviced by the BSP.
- * Especially so if we're not using an IOAPIC -zwane
- */
- if (cpu == 0)
- return -EBUSY;
- if (nmi_watchdog == NMI_LOCAL_APIC)
- stop_apic_nmi_watchdog(NULL);
- clear_local_APIC();
- /* Allow any queued timer interrupts to get serviced */
- local_irq_enable();
- mdelay(1);
- local_irq_disable();
-
- remove_siblinginfo(cpu);
-
- remove_cpu_from_maps(cpu);
- fixup_irqs(map);
- /* It's now safe to remove this processor from the online map */
- cpu_clear(cpu, cpu_online_map);
- return 0;
-}
-
-void __cpu_die(unsigned int cpu)
-{
- /* We don't do anything here: idle task is faking death itself. */
- unsigned int i;
-
- for (i = 0; i < 10; i++) {
- /* They ack this in play_dead by setting CPU_DEAD */
- if (per_cpu(cpu_state, cpu) == CPU_DEAD) {
- printk ("CPU %d is now offline\n", cpu);
- if (1 == num_online_cpus())
- alternatives_smp_switch(0);
- return;
- }
- msleep(100);
- }
- printk(KERN_ERR "CPU %u didn't die...\n", cpu);
-}
-#else /* ... !CONFIG_HOTPLUG_CPU */
-int __cpu_disable(void)
-{
- return -ENOSYS;
-}
-
-void __cpu_die(unsigned int cpu)
-{
- /* We said "no" in __cpu_disable */
- BUG();
-}
-#endif /* CONFIG_HOTPLUG_CPU */
+extern void impress_friends(void);
+extern void smp_checks(void);
-int __cpuinit native_cpu_up(unsigned int cpu)
+void __init native_smp_cpus_done(unsigned int max_cpus)
{
- unsigned long flags;
-#ifdef CONFIG_HOTPLUG_CPU
- int ret = 0;
-
- /*
- * We do warm boot only on cpus that had booted earlier
- * Otherwise cold boot is all handled from smp_boot_cpus().
- * cpu_callin_map is set during AP kickstart process. Its reset
- * when a cpu is taken offline from cpu_exit_clear().
- */
- if (!cpu_isset(cpu, cpu_callin_map))
- ret = __smp_prepare_cpu(cpu);
-
- if (ret)
- return -EIO;
-#endif
-
- /* In case one didn't come up */
- if (!cpu_isset(cpu, cpu_callin_map)) {
- printk(KERN_DEBUG "skipping cpu%d, didn't come online\n", cpu);
- return -EIO;
- }
-
- per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
- /* Unleash the CPU! */
- cpu_set(cpu, smp_commenced_mask);
-
/*
- * Check TSC synchronization with the AP (keep irqs disabled
- * while doing so):
+ * Cleanup possible dangling ends...
*/
- local_irq_save(flags);
- check_tsc_sync_source(cpu);
- local_irq_restore(flags);
-
- while (!cpu_isset(cpu, cpu_online_map)) {
- cpu_relax();
- touch_nmi_watchdog();
- }
+ smpboot_restore_warm_reset_vector();
- return 0;
-}
+ Dprintk("Boot done.\n");
-void __init native_smp_cpus_done(unsigned int max_cpus)
-{
+ impress_friends();
+ smp_checks();
#ifdef CONFIG_X86_IO_APIC
setup_ioapic_dest();
#endif
+ check_nmi_watchdog();
zap_low_mappings();
}
-
-void __init smp_intr_init(void)
-{
- /*
- * IRQ0 must be given a fixed assignment and initialized,
- * because it's used before the IO-APIC is set up.
- */
- set_intr_gate(FIRST_DEVICE_VECTOR, interrupt[0]);
-
- /*
- * The reschedule interrupt is a CPU-to-CPU reschedule-helper
- * IPI, driven by wakeup.
- */
- set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
-
- /* IPI for invalidation */
- set_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt);
-
- /* IPI for generic function call */
- set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
-}
-
-/*
- * If the BIOS enumerates physical processors before logical,
- * maxcpus=N at enumeration-time can be used to disable HT.
- */
-static int __init parse_maxcpus(char *arg)
-{
- extern unsigned int maxcpus;
-
- maxcpus = simple_strtoul(arg, NULL, 0);
- return 0;
-}
-early_param("maxcpus", parse_maxcpus);
git.samba.org / sfrench / cifs-2.6.git / blobdiff