#include <asm/vmi.h>
#include <asm/mtrr.h>
-/* Set if we find a B stepping CPU */
-static int __cpuinitdata smp_b_stepping;
-
-/* Number of siblings per CPU package */
-int smp_num_siblings = 1;
-EXPORT_SYMBOL(smp_num_siblings);
-
-/* Last level cache ID of each logical CPU */
-DEFINE_PER_CPU(u8, cpu_llc_id) = BAD_APICID;
-
-/* representing HT siblings of each logical CPU */
-DEFINE_PER_CPU(cpumask_t, cpu_sibling_map);
-EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
-
-/* representing HT and core siblings of each logical CPU */
-DEFINE_PER_CPU(cpumask_t, cpu_core_map);
-EXPORT_PER_CPU_SYMBOL(cpu_core_map);
-
-/* bitmap of online cpus */
-cpumask_t cpu_online_map __read_mostly;
-EXPORT_SYMBOL(cpu_online_map);
-
-cpumask_t cpu_callin_map;
-cpumask_t cpu_callout_map;
-EXPORT_SYMBOL(cpu_callout_map);
-cpumask_t cpu_possible_map;
-EXPORT_SYMBOL(cpu_possible_map);
static cpumask_t smp_commenced_mask;
-/* Per CPU bogomips and other parameters */
-DEFINE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info);
-EXPORT_PER_CPU_SYMBOL(cpu_info);
-
-/*
- * The following static array is used during kernel startup
- * and the x86_cpu_to_apicid_ptr contains the address of the
- * array during this time. Is it zeroed when the per_cpu
- * data area is removed.
- */
-u8 x86_cpu_to_apicid_init[NR_CPUS] __initdata =
+/* which logical CPU number maps to which CPU (physical APIC ID) */
+u16 x86_cpu_to_apicid_init[NR_CPUS] __initdata =
{ [0 ... NR_CPUS-1] = BAD_APICID };
-void *x86_cpu_to_apicid_ptr;
-DEFINE_PER_CPU(u8, x86_cpu_to_apicid) = BAD_APICID;
+void *x86_cpu_to_apicid_early_ptr;
+DEFINE_PER_CPU(u16, x86_cpu_to_apicid) = BAD_APICID;
EXPORT_PER_CPU_SYMBOL(x86_cpu_to_apicid);
-u8 apicid_2_node[MAX_APICID];
-
-/*
- * Trampoline 80x86 program as an array.
- */
+u16 x86_bios_cpu_apicid_init[NR_CPUS] __initdata
+ = { [0 ... NR_CPUS-1] = BAD_APICID };
+void *x86_bios_cpu_apicid_early_ptr;
+DEFINE_PER_CPU(u16, x86_bios_cpu_apicid) = BAD_APICID;
+EXPORT_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
-extern const unsigned char trampoline_data [];
-extern const unsigned char trampoline_end [];
-static unsigned char *trampoline_base;
-static int trampoline_exec;
+u8 apicid_2_node[MAX_APICID];
static void map_cpu_to_logical_apicid(void);
/* State of each CPU. */
DEFINE_PER_CPU(int, cpu_state) = { 0 };
-/*
- * Currently trivial. Write the real->protected mode
- * bootstrap into the page concerned. The caller
- * has made sure it's suitably aligned.
- */
-
-static unsigned long __cpuinit setup_trampoline(void)
-{
- memcpy(trampoline_base, trampoline_data, trampoline_end - trampoline_data);
- return virt_to_phys(trampoline_base);
-}
-
-/*
- * We are called very early to get the low memory for the
- * SMP bootup trampoline page.
- */
-void __init smp_alloc_memory(void)
-{
- trampoline_base = (void *) alloc_bootmem_low_pages(PAGE_SIZE);
- /*
- * Has to be in very low memory so we can execute
- * real-mode AP code.
- */
- if (__pa(trampoline_base) >= 0x9F000)
- BUG();
- /*
- * Make the SMP trampoline executable:
- */
- trampoline_exec = set_kernel_exec((unsigned long)trampoline_base, 1);
-}
-
-/*
- * The bootstrap kernel entry code has set these up. Save them for
- * a given CPU
- */
-
-void __cpuinit smp_store_cpu_info(int id)
-{
- struct cpuinfo_x86 *c = &cpu_data(id);
-
- *c = boot_cpu_data;
- c->cpu_index = id;
- if (id!=0)
- identify_secondary_cpu(c);
- /*
- * Mask B, Pentium, but not Pentium MMX
- */
- if (c->x86_vendor == X86_VENDOR_INTEL &&
- c->x86 == 5 &&
- c->x86_mask >= 1 && c->x86_mask <= 4 &&
- c->x86_model <= 3)
- /*
- * Remember we have B step Pentia with bugs
- */
- smp_b_stepping = 1;
-
- /*
- * Certain Athlons might work (for various values of 'work') in SMP
- * but they are not certified as MP capable.
- */
- if ((c->x86_vendor == X86_VENDOR_AMD) && (c->x86 == 6)) {
-
- if (num_possible_cpus() == 1)
- goto valid_k7;
-
- /* Athlon 660/661 is valid. */
- if ((c->x86_model==6) && ((c->x86_mask==0) || (c->x86_mask==1)))
- goto valid_k7;
-
- /* Duron 670 is valid */
- if ((c->x86_model==7) && (c->x86_mask==0))
- goto valid_k7;
-
- /*
- * Athlon 662, Duron 671, and Athlon >model 7 have capability bit.
- * It's worth noting that the A5 stepping (662) of some Athlon XP's
- * have the MP bit set.
- * See http://www.heise.de/newsticker/data/jow-18.10.01-000 for more.
- */
- if (((c->x86_model==6) && (c->x86_mask>=2)) ||
- ((c->x86_model==7) && (c->x86_mask>=1)) ||
- (c->x86_model> 7))
- if (cpu_has_mp)
- goto valid_k7;
-
- /* If we get here, it's not a certified SMP capable AMD system. */
- add_taint(TAINT_UNSAFE_SMP);
- }
-
-valid_k7:
- ;
-}
-
-extern void calibrate_delay(void);
-
static atomic_t init_deasserted;
static void __cpuinit smp_callin(void)
*/
if (cpu_isset(cpuid, cpu_callout_map))
break;
- rep_nop();
+ cpu_relax();
}
if (!time_before(jiffies, timeout)) {
cpu_set(cpuid, cpu_callin_map);
}
-static int cpucount;
-
-/* maps the cpu to the sched domain representing multi-core */
-cpumask_t cpu_coregroup_map(int cpu)
-{
- struct cpuinfo_x86 *c = &cpu_data(cpu);
- /*
- * For perf, we return last level cache shared map.
- * And for power savings, we return cpu_core_map
- */
- if (sched_mc_power_savings || sched_smt_power_savings)
- return per_cpu(cpu_core_map, cpu);
- else
- return c->llc_shared_map;
-}
-
-/* representing cpus for which sibling maps can be computed */
-static cpumask_t cpu_sibling_setup_map;
-
-void __cpuinit set_cpu_sibling_map(int cpu)
-{
- int i;
- struct cpuinfo_x86 *c = &cpu_data(cpu);
-
- cpu_set(cpu, cpu_sibling_setup_map);
-
- if (smp_num_siblings > 1) {
- for_each_cpu_mask(i, cpu_sibling_setup_map) {
- if (c->phys_proc_id == cpu_data(i).phys_proc_id &&
- c->cpu_core_id == cpu_data(i).cpu_core_id) {
- cpu_set(i, per_cpu(cpu_sibling_map, cpu));
- cpu_set(cpu, per_cpu(cpu_sibling_map, i));
- cpu_set(i, per_cpu(cpu_core_map, cpu));
- cpu_set(cpu, per_cpu(cpu_core_map, i));
- cpu_set(i, c->llc_shared_map);
- cpu_set(cpu, cpu_data(i).llc_shared_map);
- }
- }
- } else {
- cpu_set(cpu, per_cpu(cpu_sibling_map, cpu));
- }
-
- cpu_set(cpu, c->llc_shared_map);
-
- if (current_cpu_data.x86_max_cores == 1) {
- per_cpu(cpu_core_map, cpu) = per_cpu(cpu_sibling_map, cpu);
- c->booted_cores = 1;
- return;
- }
-
- for_each_cpu_mask(i, cpu_sibling_setup_map) {
- if (per_cpu(cpu_llc_id, cpu) != BAD_APICID &&
- per_cpu(cpu_llc_id, cpu) == per_cpu(cpu_llc_id, i)) {
- cpu_set(i, c->llc_shared_map);
- cpu_set(cpu, cpu_data(i).llc_shared_map);
- }
- if (c->phys_proc_id == cpu_data(i).phys_proc_id) {
- cpu_set(i, per_cpu(cpu_core_map, cpu));
- cpu_set(cpu, per_cpu(cpu_core_map, i));
- /*
- * Does this new cpu bringup a new core?
- */
- if (cpus_weight(per_cpu(cpu_sibling_map, cpu)) == 1) {
- /*
- * for each core in package, increment
- * the booted_cores for this new cpu
- */
- if (first_cpu(per_cpu(cpu_sibling_map, i)) == i)
- c->booted_cores++;
- /*
- * increment the core count for all
- * the other cpus in this package
- */
- if (i != cpu)
- cpu_data(i).booted_cores++;
- } else if (i != cpu && !c->booted_cores)
- c->booted_cores = cpu_data(i).booted_cores;
- }
- }
-}
-
/*
* Activate a secondary processor.
*/
preempt_disable();
smp_callin();
while (!cpu_isset(smp_processor_id(), smp_commenced_mask))
- rep_nop();
+ cpu_relax();
+
+ /* otherwise gcc will move up smp_processor_id before the cpu_init */
+ barrier();
/*
* Check TSC synchronization with the BP:
*/
check_tsc_sync_target();
- setup_secondary_clock();
if (nmi_watchdog == NMI_IO_APIC) {
disable_8259A_irq(0);
- enable_NMI_through_LVT0(NULL);
+ enable_NMI_through_LVT0();
enable_8259A_irq(0);
}
/*
unlock_ipi_call_lock();
per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
- /* We can take interrupts now: we're officially "up". */
- local_irq_enable();
+ setup_secondary_clock();
wmb();
cpu_idle();
{
/*
* We don't actually need to load the full TSS,
- * basically just the stack pointer and the eip.
+ * basically just the stack pointer and the ip.
*/
asm volatile(
"movl %0,%%esp\n\t"
"jmp *%1"
:
- :"m" (current->thread.esp),"m" (current->thread.eip));
+ :"m" (current->thread.sp),"m" (current->thread.ip));
}
/* Static state in head.S used to set up a CPU */
extern struct {
- void * esp;
+ void * sp;
unsigned short ss;
} stack_start;
#ifdef CONFIG_NUMA
/* which logical CPUs are on which nodes */
-cpumask_t node_2_cpu_mask[MAX_NUMNODES] __read_mostly =
+cpumask_t node_to_cpumask_map[MAX_NUMNODES] __read_mostly =
{ [0 ... MAX_NUMNODES-1] = CPU_MASK_NONE };
-EXPORT_SYMBOL(node_2_cpu_mask);
+EXPORT_SYMBOL(node_to_cpumask_map);
/* which node each logical CPU is on */
-int cpu_2_node[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = 0 };
-EXPORT_SYMBOL(cpu_2_node);
+int cpu_to_node_map[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = 0 };
+EXPORT_SYMBOL(cpu_to_node_map);
/* set up a mapping between cpu and node. */
static inline void map_cpu_to_node(int cpu, int node)
{
printk("Mapping cpu %d to node %d\n", cpu, node);
- cpu_set(cpu, node_2_cpu_mask[node]);
- cpu_2_node[cpu] = node;
+ cpu_set(cpu, node_to_cpumask_map[node]);
+ cpu_to_node_map[cpu] = node;
}
/* undo a mapping between cpu and node. */
printk("Unmapping cpu %d from all nodes\n", cpu);
for (node = 0; node < MAX_NUMNODES; node ++)
- cpu_clear(cpu, node_2_cpu_mask[node]);
- cpu_2_node[cpu] = 0;
+ cpu_clear(cpu, node_to_cpumask_map[node]);
+ cpu_to_node_map[cpu] = 0;
}
#else /* !CONFIG_NUMA */
static inline void __inquire_remote_apic(int apicid)
{
- int i, regs[] = { APIC_ID >> 4, APIC_LVR >> 4, APIC_SPIV >> 4 };
+ unsigned i, regs[] = { APIC_ID >> 4, APIC_LVR >> 4, APIC_SPIV >> 4 };
char *names[] = { "ID", "VERSION", "SPIV" };
int timeout;
- unsigned long status;
+ u32 status;
- printk("Inquiring remote APIC #%d...\n", apicid);
+ printk(KERN_INFO "Inquiring remote APIC #%d...\n", apicid);
for (i = 0; i < ARRAY_SIZE(regs); i++) {
- printk("... APIC #%d %s: ", apicid, names[i]);
+ printk(KERN_INFO "... APIC #%d %s: ", apicid, names[i]);
/*
* Wait for idle.
*/
status = safe_apic_wait_icr_idle();
if (status)
- printk("a previous APIC delivery may have failed\n");
+ printk(KERN_CONT
+ "a previous APIC delivery may have failed\n");
apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
apic_write_around(APIC_ICR, APIC_DM_REMRD | regs[i]);
switch (status) {
case APIC_ICR_RR_VALID:
status = apic_read(APIC_RRR);
- printk("%lx\n", status);
+ printk(KERN_CONT "%08x\n", status);
break;
default:
- printk("failed\n");
+ printk(KERN_CONT "failed\n");
}
}
}
Dprintk("Waiting for send to finish...\n");
send_status = safe_apic_wait_icr_idle();
+ mb();
atomic_set(&init_deasserted, 1);
/*
* target processor state.
*/
startup_ipi_hook(phys_apicid, (unsigned long) start_secondary,
- (unsigned long) stack_start.esp);
+ (unsigned long) stack_start.sp);
/*
* Run STARTUP IPI loop.
#endif /* WAKE_SECONDARY_VIA_INIT */
extern cpumask_t cpu_initialized;
-static inline int alloc_cpu_id(void)
-{
- cpumask_t tmp_map;
- int cpu;
- cpus_complement(tmp_map, cpu_present_map);
- cpu = first_cpu(tmp_map);
- if (cpu >= NR_CPUS)
- return -ENODEV;
- return cpu;
-}
#ifdef CONFIG_HOTPLUG_CPU
static struct task_struct * __cpuinitdata cpu_idle_tasks[NR_CPUS];
/* initialize thread_struct. we really want to avoid destroy
* idle tread
*/
- idle->thread.esp = (unsigned long)task_pt_regs(idle);
+ idle->thread.sp = (unsigned long)task_pt_regs(idle);
init_idle(idle, cpu);
return idle;
}
per_cpu(current_task, cpu) = idle;
early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu);
- idle->thread.eip = (unsigned long) start_secondary;
+ idle->thread.ip = (unsigned long) start_secondary;
/* start_eip had better be page-aligned! */
start_eip = setup_trampoline();
- ++cpucount;
alternatives_smp_switch(1);
/* So we see what's up */
- printk("Booting processor %d/%d eip %lx\n", cpu, apicid, start_eip);
+ printk("Booting processor %d/%d ip %lx\n", cpu, apicid, start_eip);
/* Stack for startup_32 can be just as for start_secondary onwards */
- stack_start.esp = (void *) idle->thread.esp;
+ stack_start.sp = (void *) idle->thread.sp;
irq_ctx_init(cpu);
- per_cpu(x86_cpu_to_apicid, cpu) = apicid;
/*
* This grunge runs the startup process for
* the targeted processor.
unmap_cpu_to_logical_apicid(cpu);
cpu_clear(cpu, cpu_callout_map); /* was set here (do_boot_cpu()) */
cpu_clear(cpu, cpu_initialized); /* was set by cpu_init() */
- cpucount--;
- } else {
- per_cpu(x86_cpu_to_apicid, cpu) = apicid;
- cpu_set(cpu, cpu_present_map);
+ cpu_clear(cpu, cpu_possible_map);
+ per_cpu(x86_cpu_to_apicid, cpu) = BAD_APICID;
}
/* mark "stuck" area as not stuck */
idle_task_exit();
- cpucount --;
cpu_uninit();
irq_ctx_exit(cpu);
complete(info->complete);
}
-static int __cpuinit __smp_prepare_cpu(int cpu)
+static void __cpuinit __smp_prepare_cpu(int cpu)
{
DECLARE_COMPLETION_ONSTACK(done);
struct warm_boot_cpu_info info;
- int apicid, ret;
+ int apicid;
apicid = per_cpu(x86_cpu_to_apicid, cpu);
- if (apicid == BAD_APICID) {
- ret = -ENODEV;
- goto exit;
- }
info.complete = &done;
info.apicid = apicid;
wait_for_completion(&done);
zap_low_mappings();
- ret = 0;
-exit:
- return ret;
}
#endif
-/*
- * Cycle through the processors sending APIC IPIs to boot each.
- */
-
static int boot_cpu_logical_apicid;
/* Where the IO area was mapped on multiquad, always 0 otherwise */
void *xquad_portio;
EXPORT_SYMBOL(xquad_portio);
#endif
-static void __init smp_boot_cpus(unsigned int max_cpus)
+static void __init disable_smp(void)
{
- int apicid, cpu, bit, kicked;
- unsigned long bogosum = 0;
-
- /*
- * Setup boot CPU information
- */
- smp_store_cpu_info(0); /* Final full version of the data */
- printk("CPU%d: ", 0);
- print_cpu_info(&cpu_data(0));
-
- boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
- boot_cpu_logical_apicid = logical_smp_processor_id();
- per_cpu(x86_cpu_to_apicid, 0) = boot_cpu_physical_apicid;
-
- current_thread_info()->cpu = 0;
-
- set_cpu_sibling_map(0);
+ cpu_possible_map = cpumask_of_cpu(0);
+ cpu_present_map = cpumask_of_cpu(0);
+ smpboot_clear_io_apic_irqs();
+ phys_cpu_present_map = physid_mask_of_physid(0);
+ map_cpu_to_logical_apicid();
+ cpu_set(0, per_cpu(cpu_sibling_map, 0));
+ cpu_set(0, per_cpu(cpu_core_map, 0));
+}
+static int __init smp_sanity_check(unsigned max_cpus)
+{
/*
* If we couldn't find an SMP configuration at boot time,
* get out of here now!
*/
if (!smp_found_config && !acpi_lapic) {
printk(KERN_NOTICE "SMP motherboard not detected.\n");
- smpboot_clear_io_apic_irqs();
- phys_cpu_present_map = physid_mask_of_physid(0);
+ disable_smp();
if (APIC_init_uniprocessor())
printk(KERN_NOTICE "Local APIC not detected."
" Using dummy APIC emulation.\n");
- map_cpu_to_logical_apicid();
- cpu_set(0, per_cpu(cpu_sibling_map, 0));
- cpu_set(0, per_cpu(cpu_core_map, 0));
- return;
+ return -1;
}
/*
printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
boot_cpu_physical_apicid);
printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n");
- smpboot_clear_io_apic_irqs();
- phys_cpu_present_map = physid_mask_of_physid(0);
- map_cpu_to_logical_apicid();
- cpu_set(0, per_cpu(cpu_sibling_map, 0));
- cpu_set(0, per_cpu(cpu_core_map, 0));
- return;
+ return -1;
}
verify_local_APIC();
connect_bsp_APIC();
setup_local_APIC();
}
- smpboot_clear_io_apic_irqs();
- phys_cpu_present_map = physid_mask_of_physid(0);
- map_cpu_to_logical_apicid();
- cpu_set(0, per_cpu(cpu_sibling_map, 0));
- cpu_set(0, per_cpu(cpu_core_map, 0));
+ return -1;
+ }
+ return 0;
+}
+
+/*
+ * Cycle through the processors sending APIC IPIs to boot each.
+ */
+static void __init smp_boot_cpus(unsigned int max_cpus)
+{
+ int apicid, cpu, bit, kicked;
+
+ /*
+ * Setup boot CPU information
+ */
+ smp_store_cpu_info(0); /* Final full version of the data */
+ printk(KERN_INFO "CPU%d: ", 0);
+ print_cpu_info(&cpu_data(0));
+
+ boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
+ boot_cpu_logical_apicid = logical_smp_processor_id();
+
+ current_thread_info()->cpu = 0;
+
+ set_cpu_sibling_map(0);
+
+ if (smp_sanity_check(max_cpus) < 0) {
+ printk(KERN_INFO "SMP disabled\n");
+ disable_smp();
return;
}
if (!check_apicid_present(bit))
continue;
- if (max_cpus <= cpucount+1)
+ if (max_cpus <= cpus_weight(cpu_present_map))
continue;
-
- if (((cpu = alloc_cpu_id()) <= 0) || do_boot_cpu(apicid, cpu))
+ /* Utterly temporary */
+ for (cpu = 0; cpu < NR_CPUS; cpu++)
+ if (per_cpu(x86_cpu_to_apicid, cpu) == apicid)
+ break;
+ if (do_boot_cpu(apicid, cpu))
printk("CPU #%d not responding - cannot use it.\n",
apicid);
else
++kicked;
}
- /*
- * Cleanup possible dangling ends...
- */
- smpboot_restore_warm_reset_vector();
-
- /*
- * Allow the user to impress friends.
- */
- Dprintk("Before bogomips.\n");
- for (cpu = 0; cpu < NR_CPUS; cpu++)
- if (cpu_isset(cpu, cpu_callout_map))
- bogosum += cpu_data(cpu).loops_per_jiffy;
- printk(KERN_INFO
- "Total of %d processors activated (%lu.%02lu BogoMIPS).\n",
- cpucount+1,
- bogosum/(500000/HZ),
- (bogosum/(5000/HZ))%100);
-
- Dprintk("Before bogocount - setting activated=1.\n");
-
- if (smp_b_stepping)
- printk(KERN_WARNING "WARNING: SMP operation may be unreliable with B stepping processors.\n");
-
- /*
- * Don't taint if we are running SMP kernel on a single non-MP
- * approved Athlon
- */
- if (tainted & TAINT_UNSAFE_SMP) {
- if (cpucount)
- printk (KERN_INFO "WARNING: This combination of AMD processors is not suitable for SMP.\n");
- else
- tainted &= ~TAINT_UNSAFE_SMP;
- }
-
- Dprintk("Boot done.\n");
-
/*
* construct cpu_sibling_map, so that we can tell sibling CPUs
* efficiently.
*/
- for (cpu = 0; cpu < NR_CPUS; cpu++) {
+ for_each_possible_cpu(cpu) {
cpus_clear(per_cpu(cpu_sibling_map, cpu));
cpus_clear(per_cpu(cpu_core_map, cpu));
}
init_gdt(cpu);
switch_to_new_gdt();
- cpu_set(cpu, cpu_online_map);
cpu_set(cpu, cpu_callout_map);
- cpu_set(cpu, cpu_present_map);
- cpu_set(cpu, cpu_possible_map);
__get_cpu_var(cpu_state) = CPU_ONLINE;
}
-#ifdef CONFIG_HOTPLUG_CPU
-void remove_siblinginfo(int cpu)
+int __cpuinit native_cpu_up(unsigned int cpu)
{
- int sibling;
- struct cpuinfo_x86 *c = &cpu_data(cpu);
-
- for_each_cpu_mask(sibling, per_cpu(cpu_core_map, cpu)) {
- cpu_clear(cpu, per_cpu(cpu_core_map, sibling));
- /*/
- * last thread sibling in this cpu core going down
- */
- if (cpus_weight(per_cpu(cpu_sibling_map, cpu)) == 1)
- cpu_data(sibling).booted_cores--;
- }
-
- for_each_cpu_mask(sibling, per_cpu(cpu_sibling_map, cpu))
- cpu_clear(cpu, per_cpu(cpu_sibling_map, sibling));
- cpus_clear(per_cpu(cpu_sibling_map, cpu));
- cpus_clear(per_cpu(cpu_core_map, cpu));
- c->phys_proc_id = 0;
- c->cpu_core_id = 0;
- cpu_clear(cpu, cpu_sibling_setup_map);
-}
+ int apicid = cpu_present_to_apicid(cpu);
+ unsigned long flags;
-int __cpu_disable(void)
-{
- cpumask_t map = cpu_online_map;
- int cpu = smp_processor_id();
+ WARN_ON(irqs_disabled());
- /*
- * Perhaps use cpufreq to drop frequency, but that could go
- * into generic code.
- *
- * We won't take down the boot processor on i386 due to some
- * interrupts only being able to be serviced by the BSP.
- * Especially so if we're not using an IOAPIC -zwane
- */
- if (cpu == 0)
- return -EBUSY;
- if (nmi_watchdog == NMI_LOCAL_APIC)
- stop_apic_nmi_watchdog(NULL);
- clear_local_APIC();
- /* Allow any queued timer interrupts to get serviced */
- local_irq_enable();
- mdelay(1);
- local_irq_disable();
-
- remove_siblinginfo(cpu);
-
- cpu_clear(cpu, map);
- fixup_irqs(map);
- /* It's now safe to remove this processor from the online map */
- cpu_clear(cpu, cpu_online_map);
- return 0;
-}
+ Dprintk("++++++++++++++++++++=_---CPU UP %u\n", cpu);
-void __cpu_die(unsigned int cpu)
-{
- /* We don't do anything here: idle task is faking death itself. */
- unsigned int i;
-
- for (i = 0; i < 10; i++) {
- /* They ack this in play_dead by setting CPU_DEAD */
- if (per_cpu(cpu_state, cpu) == CPU_DEAD) {
- printk ("CPU %d is now offline\n", cpu);
- if (1 == num_online_cpus())
- alternatives_smp_switch(0);
- return;
- }
- msleep(100);
+ if (apicid == BAD_APICID || apicid == boot_cpu_physical_apicid ||
+ !physid_isset(apicid, phys_cpu_present_map)) {
+ printk(KERN_ERR "%s: bad cpu %d\n", __func__, cpu);
+ return -EINVAL;
}
- printk(KERN_ERR "CPU %u didn't die...\n", cpu);
-}
-#else /* ... !CONFIG_HOTPLUG_CPU */
-int __cpu_disable(void)
-{
- return -ENOSYS;
-}
-void __cpu_die(unsigned int cpu)
-{
- /* We said "no" in __cpu_disable */
- BUG();
-}
-#endif /* CONFIG_HOTPLUG_CPU */
-
-int __cpuinit native_cpu_up(unsigned int cpu)
-{
- unsigned long flags;
+ per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
#ifdef CONFIG_HOTPLUG_CPU
- int ret = 0;
/*
* We do warm boot only on cpus that had booted earlier
* when a cpu is taken offline from cpu_exit_clear().
*/
if (!cpu_isset(cpu, cpu_callin_map))
- ret = __smp_prepare_cpu(cpu);
-
- if (ret)
- return -EIO;
+ __smp_prepare_cpu(cpu);
#endif
/* In case one didn't come up */
return -EIO;
}
- per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
/* Unleash the CPU! */
cpu_set(cpu, smp_commenced_mask);
return 0;
}
-void __init native_smp_cpus_done(unsigned int max_cpus)
-{
-#ifdef CONFIG_X86_IO_APIC
- setup_ioapic_dest();
-#endif
- zap_low_mappings();
-#ifndef CONFIG_HOTPLUG_CPU
- /*
- * Disable executability of the SMP trampoline:
- */
- set_kernel_exec((unsigned long)trampoline_base, trampoline_exec);
-#endif
-}
+extern void impress_friends(void);
+extern void smp_checks(void);
-void __init smp_intr_init(void)
+void __init native_smp_cpus_done(unsigned int max_cpus)
{
/*
- * IRQ0 must be given a fixed assignment and initialized,
- * because it's used before the IO-APIC is set up.
- */
- set_intr_gate(FIRST_DEVICE_VECTOR, interrupt[0]);
-
- /*
- * The reschedule interrupt is a CPU-to-CPU reschedule-helper
- * IPI, driven by wakeup.
+ * Cleanup possible dangling ends...
*/
- set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
-
- /* IPI for invalidation */
- set_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt);
-
- /* IPI for generic function call */
- set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
-}
+ smpboot_restore_warm_reset_vector();
-/*
- * If the BIOS enumerates physical processors before logical,
- * maxcpus=N at enumeration-time can be used to disable HT.
- */
-static int __init parse_maxcpus(char *arg)
-{
- extern unsigned int maxcpus;
+ Dprintk("Boot done.\n");
- maxcpus = simple_strtoul(arg, NULL, 0);
- return 0;
+ impress_friends();
+ smp_checks();
+#ifdef CONFIG_X86_IO_APIC
+ setup_ioapic_dest();
+#endif
+ check_nmi_watchdog();
+ zap_low_mappings();
}
-early_param("maxcpus", parse_maxcpus);