#include <linux/init.h>
#include <asm/arch_hooks.h>
-static unsigned char which_scsi = 0;
+static unsigned char which_scsi;
-int MCA_bus = 0;
+int MCA_bus;
EXPORT_SYMBOL(MCA_bus);
/*
/* Build the status info for the adapter */
-static void mca_configure_adapter_status(struct mca_device *mca_dev) {
+static void mca_configure_adapter_status(struct mca_device *mca_dev)
+{
mca_dev->status = MCA_ADAPTER_NONE;
mca_dev->pos_id = mca_dev->pos[0]
+ (mca_dev->pos[1] << 8);
- if(!mca_dev->pos_id && mca_dev->slot < MCA_MAX_SLOT_NR) {
+ if (!mca_dev->pos_id && mca_dev->slot < MCA_MAX_SLOT_NR) {
- /* id = 0x0000 usually indicates hardware failure,
+ /*
+ * id = 0x0000 usually indicates hardware failure,
* however, ZP Gu (zpg@castle.net> reports that his 9556
* has 0x0000 as id and everything still works. There
* also seem to be an adapter with id = 0x0000; the
mca_dev->status = MCA_ADAPTER_ERROR;
return;
- } else if(mca_dev->pos_id != 0xffff) {
+ } else if (mca_dev->pos_id != 0xffff) {
- /* 0xffff usually indicates that there's no adapter,
+ /*
+ * 0xffff usually indicates that there's no adapter,
* however, some integrated adapters may have 0xffff as
* their id and still be valid. Examples are on-board
* VGA of the 55sx, the integrated SCSI of the 56 & 57,
mca_dev->status = MCA_ADAPTER_NORMAL;
}
- if((mca_dev->pos_id == 0xffff ||
+ if ((mca_dev->pos_id == 0xffff ||
mca_dev->pos_id == 0x0000) && mca_dev->slot >= MCA_MAX_SLOT_NR) {
int j;
- for(j = 2; j < 8; j++) {
- if(mca_dev->pos[j] != 0xff) {
+ for (j = 2; j < 8; j++) {
+ if (mca_dev->pos[j] != 0xff) {
mca_dev->status = MCA_ADAPTER_NORMAL;
break;
}
}
}
- if(!(mca_dev->pos[2] & MCA_ENABLED)) {
+ if (!(mca_dev->pos[2] & MCA_ENABLED)) {
/* enabled bit is in POS 2 */
#define MCA_STANDARD_RESOURCES ARRAY_SIZE(mca_standard_resources)
-/**
+/*
* mca_read_and_store_pos - read the POS registers into a memory buffer
* @pos: a char pointer to 8 bytes, contains the POS register value on
* successful return
* Returns 1 if a card actually exists (i.e. the pos isn't
* all 0xff) or 0 otherwise
*/
-static int mca_read_and_store_pos(unsigned char *pos) {
+static int mca_read_and_store_pos(unsigned char *pos)
+{
int j;
int found = 0;
- for(j=0; j<8; j++) {
- if((pos[j] = inb_p(MCA_POS_REG(j))) != 0xff) {
+ for (j = 0; j < 8; j++) {
+ pos[j] = inb_p(MCA_POS_REG(j));
+ if (pos[j] != 0xff) {
/* 0xff all across means no device. 0x00 means
* something's broken, but a device is
* probably there. However, if you get 0x00
unsigned char byte;
unsigned long flags;
- if(reg < 0 || reg >= 8)
+ if (reg < 0 || reg >= 8)
return 0;
spin_lock_irqsave(&mca_lock, flags);
- if(mca_dev->pos_register) {
+ if (mca_dev->pos_register) {
/* Disable adapter setup, enable motherboard setup */
outb_p(0, MCA_ADAPTER_SETUP_REG);
{
unsigned long flags;
- if(reg < 0 || reg >= 8)
+ if (reg < 0 || reg >= 8)
return;
spin_lock_irqsave(&mca_lock, flags);
}
/* for the primary MCA bus, we have identity transforms */
-static int mca_dummy_transform_irq(struct mca_device * mca_dev, int irq)
+static int mca_dummy_transform_irq(struct mca_device *mca_dev, int irq)
{
return irq;
}
-static int mca_dummy_transform_ioport(struct mca_device * mca_dev, int port)
+static int mca_dummy_transform_ioport(struct mca_device *mca_dev, int port)
{
return port;
}
-static void *mca_dummy_transform_memory(struct mca_device * mca_dev, void *mem)
+static void *mca_dummy_transform_memory(struct mca_device *mca_dev, void *mem)
{
return mem;
}
short mca_builtin_scsi_ports[] = {0xf7, 0xfd, 0x00};
struct mca_bus *bus;
- /* WARNING: Be careful when making changes here. Putting an adapter
+ /*
+ * WARNING: Be careful when making changes here. Putting an adapter
* and the motherboard simultaneously into setup mode may result in
* damage to chips (according to The Indispensible PC Hardware Book
* by Hans-Peter Messmer). Also, we disable system interrupts (so
/* get the motherboard device */
mca_dev = kzalloc(sizeof(struct mca_device), GFP_KERNEL);
- if(unlikely(!mca_dev))
+ if (unlikely(!mca_dev))
goto out_nomem;
/*
mca_register_device(MCA_PRIMARY_BUS, mca_dev);
mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC);
- if(unlikely(!mca_dev))
+ if (unlikely(!mca_dev))
goto out_unlock_nomem;
/* Put motherboard into video setup mode, read integrated video
mca_dev->slot = MCA_INTEGVIDEO;
mca_register_device(MCA_PRIMARY_BUS, mca_dev);
- /* Put motherboard into scsi setup mode, read integrated scsi
+ /*
+ * Put motherboard into scsi setup mode, read integrated scsi
* POS registers, and turn motherboard setup off.
*
* It seems there are two possible SCSI registers. Martin says that
* machine.
*/
- for(i = 0; (which_scsi = mca_builtin_scsi_ports[i]) != 0; i++) {
+ for (i = 0; (which_scsi = mca_builtin_scsi_ports[i]) != 0; i++) {
outb_p(which_scsi, MCA_MOTHERBOARD_SETUP_REG);
- if(mca_read_and_store_pos(pos))
+ if (mca_read_and_store_pos(pos))
break;
}
- if(which_scsi) {
+ if (which_scsi) {
/* found a scsi card */
mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC);
- if(unlikely(!mca_dev))
+ if (unlikely(!mca_dev))
goto out_unlock_nomem;
- for(j = 0; j < 8; j++)
+ for (j = 0; j < 8; j++)
mca_dev->pos[j] = pos[j];
mca_configure_adapter_status(mca_dev);
outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
- /* Now loop over MCA slots: put each adapter into setup mode, and
+ /*
+ * Now loop over MCA slots: put each adapter into setup mode, and
* read its POS registers. Then put adapter setup off.
*/
- for(i=0; i<MCA_MAX_SLOT_NR; i++) {
+ for (i = 0; i < MCA_MAX_SLOT_NR; i++) {
outb_p(0x8|(i&0xf), MCA_ADAPTER_SETUP_REG);
- if(!mca_read_and_store_pos(pos))
+ if (!mca_read_and_store_pos(pos))
continue;
mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC);
- if(unlikely(!mca_dev))
+ if (unlikely(!mca_dev))
goto out_unlock_nomem;
- for(j=0; j<8; j++)
- mca_dev->pos[j]=pos[j];
+ for (j = 0; j < 8; j++)
+ mca_dev->pos[j] = pos[j];
mca_dev->driver_loaded = 0;
mca_dev->slot = i;
{
int slot = mca_dev->slot;
- if(slot == MCA_INTEGSCSI) {
+ if (slot == MCA_INTEGSCSI) {
printk(KERN_CRIT "NMI: caused by MCA integrated SCSI adapter (%s)\n",
mca_dev->name);
- } else if(slot == MCA_INTEGVIDEO) {
+ } else if (slot == MCA_INTEGVIDEO) {
printk(KERN_CRIT "NMI: caused by MCA integrated video adapter (%s)\n",
mca_dev->name);
- } else if(slot == MCA_MOTHERBOARD) {
+ } else if (slot == MCA_MOTHERBOARD) {
printk(KERN_CRIT "NMI: caused by motherboard (%s)\n",
mca_dev->name);
}
/* More info available in POS 6 and 7? */
- if(check_flag) {
+ if (check_flag) {
unsigned char pos6, pos7;
pos6 = mca_device_read_pos(mca_dev, 6);
pos5 = mca_device_read_pos(mca_dev, 5);
- if(!(pos5 & 0x80)) {
- /* Bit 7 of POS 5 is reset when this adapter has a hardware
+ if (!(pos5 & 0x80)) {
+ /*
+ * Bit 7 of POS 5 is reset when this adapter has a hardware
* error. Bit 7 it reset if there's error information
* available in POS 6 and 7.
*/
void __kprobes mca_handle_nmi(void)
{
- /* First try - scan the various adapters and see if a specific
+ /*
+ * First try - scan the various adapters and see if a specific
* adapter was responsible for the error.
*/
bus_for_each_dev(&mca_bus_type, NULL, NULL, mca_handle_nmi_callback);
git.samba.org / sfrench / cifs-2.6.git / blobdiff